9b29429984
Remove clocks as common code now can determine what clock rates to use.
...
Remove other than 8 byte bursts- until we clarify whether or not buggy
PCI implementatiosn really cause problems.
1998-09-08 07:16:46 +00:00
4275b01a08
Adjust copyright notice to reflect that Qlogic still owns this.
...
Move SCSI f/w to 7.55 level. Move FibreChannel f/w to 1.13 level.
1998-09-08 07:13:11 +00:00
0456723423
Adjust copyright to reflect that this is really still owned by Qlogic
1998-09-08 07:06:57 +00:00
73ac88b3ed
make the default disklabel consistent to the SCSI/ATAPI case
1998-09-07 21:28:22 +00:00
3d396754e1
Regen.
1998-09-07 08:19:31 +00:00
7e2e241a81
Fix capitalization of Kodak. This change was clearly never tested.
1998-09-07 08:18:40 +00:00
af17d22848
Missing bits in DEBUG mode.
1998-09-07 07:58:45 +00:00
199e474e95
Removed some spurious `long's.
1998-09-06 22:43:16 +00:00
b871ab5f2c
Use the new "%b" format for the various control register bits.
1998-09-06 21:39:33 +00:00
c5b834a5bc
Do it right for a change.
1998-09-06 21:23:58 +00:00
b9ce59191d
Oops. Fix overenthusiastic macro.
1998-09-06 21:21:06 +00:00
adebee9ad7
Regen.
1998-09-06 17:27:40 +00:00
25eaf86126
Add the Brooktree 878 and 879 id's and fix the comment of the 849 entry.
1998-09-06 17:26:03 +00:00
1247373b7a
Correct the remaining uses of ad1848_softc to ad1848_isa_softc
1998-09-06 13:03:49 +00:00
06f777a3fe
Debug output updates (Ezra Story; PR#6108).
1998-09-06 11:06:52 +00:00
7991c56b93
Use `ad1848_isa_{open|close}' (Ezra Story; PR#6108).
1998-09-06 11:05:21 +00:00
484ce04810
The `address' field from the prom is really an unsigned 32-bit value.
...
Make it so.
1998-09-05 22:29:49 +00:00
c05097f947
Remove function name conflict.
1998-09-05 22:14:25 +00:00
18da157aa9
Assign my copyrights to TNF.
1998-09-05 17:28:57 +00:00
fc5e533cc2
Relinquish my copyright claim on this file.
1998-09-05 17:23:09 +00:00
42ebb851c5
sparc64 uses more of this file.
1998-09-05 16:47:06 +00:00
9d8e954403
Regen.
1998-09-05 15:46:08 +00:00
127efe1a4d
Fix typo.
1998-09-05 15:45:34 +00:00
d8e5a87d76
Regen.
1998-09-05 15:42:42 +00:00
b0e65e8371
Regen.
1998-09-05 15:42:41 +00:00
f7f5af21fb
Add Kodak DC260 camera.
1998-09-05 15:42:12 +00:00
bd52ba3c5a
Assign copyright to TNF.
1998-09-05 14:42:05 +00:00
344ed1eaef
Assign copyright to TNF.
1998-09-05 14:20:01 +00:00
236611ac0b
Regen.
1998-09-05 14:18:04 +00:00
c7a4282124
Assign copyright to TNF.
1998-09-05 14:12:36 +00:00
ba8c6b9828
arm32 now supports soft serial interrupts.
1998-09-05 04:25:35 +00:00
a3ee69c87a
Split SMC chipset ARCnet driver into
...
- machine independent chip driver, in dev/ic/smc90cx6.c/...reg.h,...var.h,
using bus_space methods
- ZBUS frontend in arch/amiga/dev/if_bah_zbus.c
- added IPL_SOFTNET to arch/amiga/include/intr.h, for this
Implementing the ISA bus frontend is left as an exercise to the reader.
1998-09-02 22:32:06 +00:00
453b195c4d
Can't use pckbc_enqueue_cmd() in attach() because pckbc's initialization
...
is not yet completed, have to use pckbc_poll_cmd() instead.
1998-09-02 20:01:15 +00:00
b43e33a471
Since the RAMDAC drivers use the !=0-ness of fields for diagnostic
...
purposes, we have to zero-initialize the tga_devconfig structure.
1998-09-02 19:51:06 +00:00
fd97cb265c
typo for non-SCSIVERBOSE case
1998-09-02 02:18:48 +00:00
380e88d4f0
Adjust some comments.
1998-09-01 22:56:00 +00:00
6693724a83
Changed inaccurate comment on the sc_freq member of the driver's softc
...
structure. The frequency is represented in MHz rather than Hz. [PR/6805]
1998-09-01 22:22:03 +00:00
fec2fa9e43
Typo in device Id mask.
1998-09-01 21:04:43 +00:00
92707994ef
use ad1848_isa_attach, so GUS cards with CS4231 don't panic the kernel
1998-09-01 18:48:38 +00:00
a442e328e7
-add italian layout, from Dante Profeta <dante@mclink.it>
...
-name pckbd_keydesc_declk -> pckbd_keydesc_us_declk for consistency
1998-09-01 18:11:13 +00:00
9d3ed7d925
add definition for italian keyboard
1998-09-01 18:09:27 +00:00
b742b9ad67
Move some debugging output to more useful levels.
1998-09-01 07:27:06 +00:00
29e9385ce2
Make this file compile again by removing no longer used `struct
...
cfdriver md_cd' and related code.
1998-09-01 06:13:33 +00:00
d58173741d
kill the last remnants of __BROKEN_INDIRECT_CONFIG. (only the pica port
...
used it, and it's non-working and apparently slated for replacement.)
1998-08-31 22:28:04 +00:00
d35b531a68
Remove __BROKEN_INDIRECT_CONFIG
...
Correct currently known boards
1998-08-31 17:15:25 +00:00
5038a72078
A few modest simplifications.
1998-08-31 11:13:54 +00:00
860867bfec
macro argument protection.
1998-08-31 11:13:10 +00:00
98e669d970
Use sbus attach args features.
...
getpropA() => getprop()
1998-08-30 21:25:30 +00:00
61cf67759a
make AUDIO_DEBUG work again
1998-08-29 22:49:48 +00:00
fe6b9295a8
Adjust for some small changes in lsi64854 back-end driver.
1998-08-29 21:43:00 +00:00
73b946e04e
LSI64854 DMA engine driver.
...
Currently used by Lance Ethernet and NCR SCSI front-ends on sparc/sparc64.
1998-08-29 21:42:03 +00:00
1f0567dd53
Nuke unnecessary header files.
1998-08-29 20:38:38 +00:00
3557f62f30
Use bus_space_*() to access device registers.
...
Add `esp' and `le' DMA engine.
1998-08-29 20:32:09 +00:00
15d097c04d
Make compile without AUDIO_DEBUG
1998-08-29 19:52:09 +00:00
cb8b14827c
Adjust copyright justification
1998-08-29 13:54:50 +00:00
17759893b0
Add rcs id
1998-08-29 13:44:49 +00:00
2f94f2c21c
some fixes:
...
-use of uninitialized variable in attach (mostly harmless)
-removal of dead code in attach()
-fix of interpretation of SIA blocks on >=21142 (serious, caused strange
things with 10Mbit)
1998-08-28 20:58:37 +00:00
370a38c007
Add braces to make egcs happy.
1998-08-28 20:03:10 +00:00
1643e13b90
XXX - BUS_DMA_BIT24 does not exist everywhere..
1998-08-28 20:01:08 +00:00
f3bfb08d45
When determining the default media on the Vortex/Boomerang, don't pick
...
the full-duplex variant. XXX We should check the EEPROM for "default to
full-duplex".
1998-08-28 18:16:02 +00:00
17c31a8a21
Add ETHER|NONE to default capabilities, or we'll panic when attaching
...
the forthcoming ex driver.
1998-08-28 12:50:36 +00:00
535cdbe9f2
Slight optimization in audio_[pr]int().
1998-08-28 12:07:41 +00:00
b1447741da
Nuke Dprintf; fix formats.
1998-08-28 08:59:14 +00:00
9441400ef0
Nuke Dprintf; fix formats.
...
Add missing copyright.
1998-08-28 08:58:24 +00:00
c50af72c34
Handle the case of MIDI devices with no audio devices.
1998-08-28 07:44:12 +00:00
efad4d44c0
CS4231 audio driver. Play only for now.
1998-08-27 20:51:17 +00:00
ce2bbbd092
Add audiocs.
1998-08-27 20:49:37 +00:00
dd0709d28d
Add selected `%b' bits.
1998-08-27 20:05:11 +00:00
142bff0170
Add missing entries and make it slightly more verbose.
1998-08-27 19:53:02 +00:00
b3279eb3dc
Move a few prototypes.
...
Whitespace cleanup.
1998-08-27 18:45:12 +00:00
41ad1758ac
move isp_sbus attachment into /sys/dev/sbus.
1998-08-27 11:30:45 +00:00
a80cad6e0a
regen
1998-08-26 20:00:37 +00:00
fe1c5e2163
add the SIS 5597/5598 all-in-one PCI chipset
1998-08-26 19:59:16 +00:00
fc397afa14
debug level 0
1998-08-26 15:06:37 +00:00
d93a0d81b0
Add AdvanSys support
1998-08-26 14:20:37 +00:00
97b8010151
Changed ADVSYSPROD to ADVSYS vendor ID
...
Added 1200A, 1200B, ULTRA, 2300 AdvanSys products ID
1998-08-26 14:18:26 +00:00
d9e417cde9
Add AdvanSys 930U and 940U SCSI controllers
1998-08-26 14:13:58 +00:00
7972a062b0
Make the OPL driver attach directly to ISA as well.
1998-08-26 13:33:59 +00:00
8d64ea1683
Less debug printing.
1998-08-26 13:08:44 +00:00
6633896a67
Do some renaming of registers and make sure we get sound in both
...
channels on OPL3.
1998-08-26 13:08:10 +00:00
bb3c56652c
Make the OPL driver turn on the sound on sound cards that require it.
...
That makes it much more likely that we get any sound. DUH!
1998-08-26 12:10:22 +00:00
bc21c243cd
For non-MII Vortex/Boomerang, set full-duplex in the MAC CONTROL register
...
in epsetmedia() if full-duplex is selected (new feature on these cards!)
On MII Boomerangs, set the full-duplex bit in MAC CONTROL in the statchg
callback from the MII layer. Should fix full-duplex on these cards.
1998-08-26 01:32:41 +00:00
19b759c2e4
Define the full-duplex bit in the W3 MAC CONTROL register.
1998-08-26 01:29:03 +00:00
6ab705c01b
Also include SUN4 in the temporary split
1998-08-25 22:42:48 +00:00
d4ec33b5f0
The new MI part of the AD1848 driver.
1998-08-25 22:36:40 +00:00
f7151935ef
Adjust for ad1848.c split.
1998-08-25 22:35:25 +00:00
2ffb54bdcc
Split the AD1848 driver into MI (dev/ic/ad1848.c) and ISA parts.
1998-08-25 22:34:29 +00:00
a48f7d8a24
Attach the OPL FM synth to the ESS driver.
...
It probes, but alas, no sound.
1998-08-25 12:52:47 +00:00
daa8ad1747
Add some braces to make egcs happy.
1998-08-25 04:56:01 +00:00
85c6c03e2a
Change the 32-bit fields of the RFA to an arrays of bytes, so that
...
egcs won't attempt to optimize inline copies of them into a single
load/store (the RFA is not 4-byte aligned in the DMA area).
Just use memcpy() to copy those fields, now, not our own home-grown.
1998-08-25 01:08:15 +00:00
4e7c07c2b4
Write MIDI data from the sequencer to the device in a more sane way.
1998-08-24 17:59:25 +00:00
ea3bfd6d80
Fix bug in transmit logic that would transmits to stop. Boolean dyslexia
...
stricks again.
1998-08-24 14:09:15 +00:00
54bf4389f9
egcs brace warning
1998-08-24 02:34:44 +00:00
7734e0ef29
fix version string (from PC Card Standard, April 1998 (Release 6.1))
1998-08-22 23:41:48 +00:00
c7e036f6e2
Let opl attach to ess.
...
WARNING: it doesn't work yet.
1998-08-22 22:55:09 +00:00
f2ff59edc5
Change debug output.
1998-08-22 22:54:11 +00:00
369bc4cb89
Allocate an I/O according to the config table entries.
...
Auto assign is done only when all cfe->iospace[0].start fails.
1998-08-22 17:47:58 +00:00
9d4112bf21
make struct xd_iocmd's block member an u_int not a u_long
1998-08-22 15:11:02 +00:00
4d4f129eaa
make "struct sun_dkpart" the same for sparc/sparc64 (sparc64 must have been broken?)
1998-08-22 14:55:28 +00:00
bc7c6c0c4c
Fix DVMA address handling.
1998-08-22 11:47:45 +00:00
ef6b13cc87
vm_offset_t => vaddr_t.
1998-08-21 14:13:47 +00:00
ff2c3adddc
Add some braces to stop the new egcs warnings.
1998-08-20 19:55:06 +00:00
5ad46000df
Remove vestiges of sparc-specific interrupt handling.
1998-08-20 11:44:58 +00:00
177621555f
remove sparc hack: there's a bus.h now.
1998-08-20 11:42:55 +00:00
1f007a13cc
Cast bus_size_t to u_long in printf() args.
1998-08-20 11:42:13 +00:00
a6ed1cdd4e
Provide a workaround for people who want a sequencer but have no MIDI devices.
1998-08-20 10:59:09 +00:00
915f1fe566
Add missing __P
1998-08-20 10:46:10 +00:00
96aa1cec21
Add ofisa attachment for the ISA joystick driver.
...
XXX currently arm32-specific.
1998-08-20 07:02:32 +00:00
5ae808b38d
ss->special could be NULL, so sane would crash the kernel.
1998-08-19 08:40:31 +00:00
8021b2ae29
Initial support for the Brooktree Bt463 RAMDAC.
1998-08-18 23:29:28 +00:00
ff266f0937
Add some braces to make egcs happy.
1998-08-18 18:23:07 +00:00
1083dcb6ca
Back out previous.
1998-08-18 18:16:30 +00:00
0e6f209f9d
Add forgotten OPL file.
1998-08-18 17:56:39 +00:00
ee26f0775b
This now needs <dev/midi_if.h> to build.
1998-08-18 17:55:09 +00:00
813dfd31c5
Fix a couple of obvious bugs in the hardware cursor handling code, and
...
use the RAMDAC callbacks to get/set the cursor colormap.
1998-08-18 08:40:39 +00:00
6ba7f2f6fd
Need an entry point to check cursor colormap entries for validity
...
before actually setting them.
1998-08-18 08:23:46 +00:00
3db6850bb7
When updating the cursor colormap, actually store the data in our
...
copy of the cursor colormap, not the regular colormap!
1998-08-18 08:22:49 +00:00
feaf75c755
Add set_curcmap and get_curcmap RAMDAC methods, for use by the TGA hardware
...
cursor code. These are unneeded on the Bt485, since the RAMDAC handles
the hardware cursor. They are needed for the Bt463, however, since the
RAMDAC only provides cursor color.
1998-08-18 08:07:45 +00:00
082116a927
vm_offset_t -> vaddr_t
1998-08-18 08:00:17 +00:00
b43fc64da6
Registers for the Brooktree Bt463 RAMDAC.
1998-08-18 07:43:09 +00:00
73d1752963
Deal with somewhat bogus uninitialized warning in new egcs. Behavior
...
is such that would inidicate that __attribute__((__noreturn__)) is not
being honored.
1998-08-18 06:16:45 +00:00
6bfd748b46
First-crack at RoadRunner (3c574-TX 10/100Mbps PCMCIA). Doens't yet use
...
any of the RoadRunner speed hacks.
1998-08-17 23:20:39 +00:00
93d3ff20b4
Regen.
1998-08-17 23:12:15 +00:00
d2f5e92d0a
Add product ID for the 3Com 3c574-TX 10/100Mbps Ethernet, provided
...
by Laine Stump.
1998-08-17 23:10:12 +00:00
cd09067eb4
* Redo the way the way the MIDI driver attaches to audio devices.
...
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
The opl driver is not finished yet; it sounds pretty awful.
For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
1998-08-17 21:16:09 +00:00
d0a17ab63e
Fix a typo.
1998-08-17 20:34:19 +00:00
a2cad65f4e
Only mark the disk dirty if we write.
1998-08-17 19:30:38 +00:00
fdb344b38f
- use sc_tlphycap with bitmasks instead of direct comparaison (needed now
...
that we may have (TLPHY_MEDIA_10_x | TLPHY_MEDIA_NO_10_T).
- add carrier detect for AUI/BNC.
This now works properly with a "Compaq Netelligent 10/100 TX" and a
"Compaq ProLiant Integrated Netelligent 10/100 TX", untested with others
(but should work as well).
1998-08-17 16:41:45 +00:00
dbdebe9c17
Reduce com_devs[] to those devices (one!) that we need to match by CIS
...
string comparison. Change com_dev_match() somewhat to reflect that.
1998-08-17 03:28:51 +00:00
04f0dc658c
Assign my copyrights to TNF.
1998-08-17 00:49:01 +00:00
a1ac68819f
Assign my copyrights to TNF.
1998-08-17 00:26:32 +00:00
2a5371253c
splnet() is not appropriate for everyone. Raise and lower SPL via
...
macros defined in pdqvar.h
1998-08-16 03:44:42 +00:00
cbcc3cfa46
Oops, back out something that I didn't intend to commit.
1998-08-16 01:16:57 +00:00
5e177fa975
Regen.
1998-08-15 21:37:24 +00:00
ca15ee6ef6
Consolidate the Socket products, pointed out by Nathan Williams.
1998-08-15 21:36:25 +00:00
05eabf2eef
Regen.
1998-08-15 21:29:24 +00:00
0ac0bf4615
Oops, that Socket Communications vendor ID was redundant. Sort the vendors
...
so I won't make that mistake again.
1998-08-15 21:28:26 +00:00
1c7ae25125
Sigh, #if 0 the SMC 8020BT EtherEZ entry until we know what the product
...
ID really is.
1998-08-15 20:47:32 +00:00
fec04bbde8
Regen.
1998-08-15 20:46:31 +00:00
f2a088f77c
Oops, that SMC product ID is actually for the 8016 EtherCard. *sigh*
1998-08-15 20:46:06 +00:00
066e235e19
Take a stab at supporting the SMC 8020BT EtherEZ. (Similar to the
...
Megahertz; Ethernet address is stored in third CIS info string, but
may also be in the FUNCE/LANNID tuple.)
1998-08-15 20:11:38 +00:00
8954eaede3
Regen.
1998-08-15 20:08:37 +00:00
1bf26fea5a
Add SMC vendor ID, and SMC 8020BT EtherEZ product ID.
1998-08-15 20:08:07 +00:00
ef4e6a52aa
Regen.
1998-08-15 19:27:16 +00:00
20e821491f
Add the Zoom ComStar 33.6 modem, from Dave Huang <khym@bga.com>, PR #5976 .
1998-08-15 19:26:18 +00:00
a68f2398d3
Add the Trust Combo EthernetCard, from Dante Profeta.
1998-08-15 19:00:04 +00:00
b2097ee74d
Regen.
1998-08-15 18:58:32 +00:00
9314c120f7
Add the Trust Combo EthernetCard product ID, from Dante Profeta.
1998-08-15 18:58:05 +00:00
cb7214f1a4
Regen.
1998-08-15 18:56:16 +00:00
81f67879f9
Add vendor ID for Socket Communications, and product ID for the
...
Socket Communcations Dual RS232 card.
1998-08-15 18:55:25 +00:00
d07b3639a4
Assign my copyrights to TNF.
1998-08-15 17:47:15 +00:00
7ce9726a7d
Oops, don't forget to tick the MII once a second.
1998-08-15 17:04:52 +00:00
1bbc572701
Fix typos in last commit.
1998-08-15 16:58:53 +00:00
c2f2b0d431
RoadRunner has a bit in Reset Options that must be set to enable the MII.
...
Define that bit.
1998-08-15 16:50:07 +00:00
53d231dae3
correct indent.
1998-08-15 16:49:33 +00:00
a0aca43d11
Reset Options is in Window 3; correct a comment.
1998-08-15 16:47:30 +00:00
479d8b25bf
The 3c515 (Corkscrew) and 3c574 (RoadRunner) have their Window 1 registers
...
offset! Define an inline function to compute the Window 1 register offset
and use it.
1998-08-15 16:20:51 +00:00
31a3d86b80
Define the Corkscrew chipset - used by the 3c515 ISA 10/100mbps cards.
1998-08-15 16:15:40 +00:00
3ca5e496cc
Fix a brain'o that caused the 3c589 to not match.
1998-08-15 16:09:46 +00:00
305a943ba7
Use scsi style geometry printout
1998-08-15 15:05:22 +00:00
62b1bf3e2e
Assign my copyrights to TNF.
1998-08-15 10:51:16 +00:00
6dc903202f
Assign my copyrights to TNF.
1998-08-15 10:10:47 +00:00
7d0d0346fa
Define the RoadRunner FIFO count registers.
1998-08-15 08:28:22 +00:00
ccf620bfab
Define the 3Com "RoadRunner" chipset; like the Boomerang, but for PCMCIA.
...
No DMA is wired up, it has a shared memory interface, and a FIFO buffer
which can be used to speed up PIO transfers. (The latter two are
PCMCIA-specific speed hacks to deal hide the performance lossage from
using a PCMCIA->PCI bridge internally.)
1998-08-15 07:28:04 +00:00
4c88513d7d
Look up the PCMCIA 3Com products in a table-driven fashion, like the
...
PCI products.
1998-08-15 07:25:15 +00:00
d5b735ae79
In the NewMedia callback, make sure we have a LAN Node ID tuple.
1998-08-15 06:56:12 +00:00
2be6d344ab
Use the symbolic name for the tuple code used to find the Ethernet
...
address.
1998-08-15 06:46:33 +00:00
129cbf95ee
Minor edit.
1998-08-15 05:16:41 +00:00
cc8a78e783
Assign my copyrights to TNF.
1998-08-15 04:42:42 +00:00
b2827b9d36
Assign copyright to TNF.
1998-08-15 04:16:55 +00:00
df9baf2311
Assign copyrights to TNF.
1998-08-15 03:51:30 +00:00
6d3d8a1350
Make copyright notices with my name consistent.
1998-08-15 03:02:31 +00:00
2b869a383f
Use _CS_OFISA_MD_* callbacks for old, broken OpenFirmware builds.
1998-08-15 02:59:01 +00:00
dd769acbfb
Name some constants consistently between drivers.
1998-08-15 02:37:50 +00:00
cc84859459
Map the EISA registers correctly!
1998-08-15 02:30:56 +00:00
196dfd7597
Always map the EISA configuration registers.
1998-08-15 02:26:31 +00:00
e9c5407d64
Only map the amount of space the device actually occupies.
...
Part of PR #5279 , Martin Musemann.
1998-08-15 01:59:25 +00:00
93eb06f9f2
Don't bother with the num_memspace check. It makes some otherwise-working
...
cards (e.g. Xircom CM33) fail needlessly.
From Jan van Doorn <jdoorn@nc.com>, PR #5580 .
1998-08-15 01:41:31 +00:00
582d4a7856
Should not use SCSI_POLL if the system is not cold.
1998-08-15 01:32:55 +00:00
9646d7f100
Add support for the D-Link DE-660. From Tero Kivinen <kivinen@ssh.fi>,
...
PR #5691 .
1998-08-15 01:20:05 +00:00
7ea79f1cb2
Regen.
1998-08-15 01:18:06 +00:00
be8a202a21
Add the D-Link DE-660. From Tero Kivinen <kivinen@ssh.fi>, PR #5691 .
1998-08-15 01:17:51 +00:00
b3b533c44d
Keep track if the disk has had done i/o, making it dirty. On last close,
...
or at shutdown, flush the cache if the disk is still dirty and it support
cache flushing. Fixes PRs #5588 (Jim Bernard) and #5589 (Justin Gibbs).
1998-08-15 01:10:54 +00:00
1f4b4ceda6
Add support for the NewMedia BASICS Ethernet. Device info provided by
...
Stefan Grefen in PR #5902 .
1998-08-14 23:31:22 +00:00
5fa0fd5087
Regen.
1998-08-14 22:59:54 +00:00
924090ec6d
Add vendor ID for NewMedia Corporation, and product ID for NewMedia
...
BASICS Ethernet. From Stefan Grefen, PR 5902.
1998-08-14 22:59:35 +00:00
cea8e0a23f
explicitely select the master before trying to access its registers
1998-08-14 20:39:04 +00:00
a8d0a43ffa
2 changes to pciide_probe_wdc() (used in compatibility mode to check
...
if i drive is responding):
-if the reset succeeds, check some registers to make sure there is really
a drive (and not a chipset which echoes back the last written value)
-explicitely select the master before trying to read the master's status
1998-08-14 20:35:40 +00:00
183442fe73
Emulate ulinear_be using slinear_be on later chips.
1998-08-14 00:49:23 +00:00
ae8bdb1e72
Make sure CIMDIS is set and FLINK is clear in the PCR.
1998-08-14 00:23:26 +00:00
48bf26949f
Report "true" disk geometry; like sd disks do
1998-08-13 18:16:53 +00:00
523a2c670a
Make sure to turn off timeout flag when doing untimeout().
1998-08-13 15:50:57 +00:00
55491ea367
Rototill match algorithim. New scheme:
...
1. Does the function claim to be a serial port?
2. Does the function's configuration table present all four
standard ISA com port ranges?
3. Is the device in our table?
New serial devices do not need to be added to the table unless they
fail both (1) and (2).
1998-08-13 15:08:54 +00:00
a461703d7f
Use PCMCIA_FUNCTION definitions.
...
Initialize function ID in new pcmcia_function structures to
PCMCIA_FUNCTION_UNSPEC, not PCMCIA_FUNCTION_MULTIFUNCTION (0).
1998-08-13 15:03:06 +00:00
5417a1681d
Add PCMCIA_FUNCTION_* macros, for function types defined by
...
PCMCIA_CISTPL_FUNCID.
1998-08-13 15:00:02 +00:00
dd1665ce4b
Fix typo in SYSEX code.
1998-08-13 12:40:20 +00:00
f750a7d47e
device ess was listed twice
1998-08-13 04:53:18 +00:00
a2dd74ed79
Merge paddr_t changes into the main branch.
1998-08-13 02:10:37 +00:00
c987d23146
Remove some leftover fluff.
...
Make sure there is no outstanding timeout when the sequencer is closed.
1998-08-13 00:13:56 +00:00
94e489e277
If the autonegotiation is enabled, the PAR doesn't indicate duplex mode
...
properly! Work around this by determing current active media by taking
the highest-order common bit of our advertised capabilites and the link
partner's.
If the link partner doens't do autonegotiation, then parallel detection will
pick up the media type, which will never be full-duplex, so reading the PAR
is ok in this case.
Bug pointed out by Matthias Drochner, work-around inspired by reading
the dp83840 manual, section 3.9 (IEEE 802.3u auto-negotiation).
1998-08-12 22:41:21 +00:00
mjacob