like a no-rewind device. Secondly figure out whether the initial TUR
for a CTRL_MODE open resulted in a tape being actually found (if so,
then do a mount session).
Move the 'sun compatibility' behaviour into stdone && stclose- don't
mark a tape as having been written in stopenm, fer gosh sakes.
>We're not Linux. If we still want driver version strings to be displayed
>at boot, then I suppose DEBUG is a reasonable compromise.
Makes the whole concept useless. This is for default printouts. If you
can build a debug kernel, you know what version you have. This was under
the concept of 'RAS' so that hapless users could tell you microversion
things. But I guess this isn't the right way according to our local
Jesuits. Oh, well. I'll think up something different and hopefully
less objectionable. And yes, NetBSD isn't linux. The developers seem
to be equally bad tempered, but linux is more successful.
Part B:
Field interrupts in OS layer so that (in this OS) bus_dmamap_sync(POSTREAD)
can (formally) ensure that the result queue is stable wrt to buffering
and that for sending a command a bus_dmamap_sync(PREWRITE) is done to
ensure that the device gets a good view of what the mailbox contents
should be.
>at boot, then I suppose DEBUG is a reasonable compromise.
Makes the whole concept useless. This is for default printouts. If you
can build a debug kernel, you know what version you have. This was under
the concept of 'RAS' so that hapless users could tell you microversion
things. But I guess this isn't the right way according to our local
Jesuits. Oh, well. I'll think up something different and hopefully
less objectionable. And yes, NetBSD isn't linux. The developers seem
to be equally bad tempered, but linux is more successful.
machdep.c retains the `mainbus' (i.e. sun4/sun4c) bus_dma* versions for now.
Create a DVMA map specifically for 24-bit devices (le,ie), which has a
more room than previous DVMA map which should be reserved for sun4 VME.
commit message from Bill Fenner:
Turn on TCP_NODELAY on the remote socket, to turn off sender silly window
syndrome avoidance. The combination of SWS avoidance and ack-every-other
causes low throughput if the block size divided by the MSS is odd (which
is true with the default block size and MSS).
Turning on TCP_NODELAY disables the Nagle algorithm and sender SWS avoidance.
The rdump request/response protocol can not invoke Nagle and cannot cause
SWS, so this has no negative effects.
Also, put back the code that sets the TOS to "throughput", which seems to
have been erroneously removed during the Lite-2 merge.
Also- to be fair and on review, kern/391 isn't really addressed by
the previous commits. In reviewing, I'm embarassed to find that this
talks about reading at EOT. I'm actually going to claim that this
is 'not a bug' or 'fixed already' in that at the end of media (at the
edge of recorded media), you may continuously open the tape (should
you choose to) issue a read, and zero bytes will transfer- this is a
sufficient EOF indicator.
1. Document CONTROL MODE (and the fact that you can do I/O now if
the device is opened in control mode- the actual close behaviour
is akin to normal mode (i.e., it rewinds)). This should probably
either be a separate bit, or O_NDELAY on the open as well.
2. Document new MTEWARN subcommand to MTIOCTOP (enable/disable
early warning behaviour).
3. Document EOM handling more fully.
4. Note that for DENSITY and BLOCKSIZE values that the values you
set aren't persistent past the current mount session unless you have
the CONTROL MODE device opened.
5. Remove the old EOM handling BUG notice and instead note that having
a minor bit for compression selection wouldn't be a bad thing.
Flame on!
a now unused variable. Also, remove the restriction against at density
code being greater than the max SCSI 2 density code: 0x80..0xff are the
Vendor Unique codes and most certainly should be allowed. The check for
invalid values should be less than 0 or greater than 255.
Oh- yeah, the previous commit addressed kern/391.
thorpej