f329fb84ad
We need to be slightly more clever during auto-configuration, to make
...
sure that we a) don't ignore components with correct mod-counters, and
b) do ignore components with bogus mod-counters.
2000-05-28 05:23:41 +00:00
141dcca251
Add VAX660/670/680 support.
2000-05-28 05:17:25 +00:00
4656dfd24f
Add a new function to remove extra buffers when truncating a file. This is
...
more generic than the vinvalbuf(V_SAVEMETA) case, avoiding synchronous
operations when truncating to a non-zero length.
2000-05-28 04:13:56 +00:00
1ddfaaf8fa
Umm.. Complete is not equal to 'left to do'. Fix the math.
2000-05-28 03:42:23 +00:00
e38b4355e2
Abort any parity re-writes before unconfiguring a RAID set.
...
Partially addresses PR#10182.
2000-05-28 03:00:31 +00:00
5108d90ce5
Fix bpf output on fddi to actually work. Make it compatible with ULTRIX
...
and Tru64.
2000-05-28 02:49:35 +00:00
ab415393d3
`ep' has `plug-and-play' support on all buses, including non-PnP ISA.
...
Attach ep* at isa instead of ep0, so we will autoconfigure all 3c5x9s.
2000-05-28 02:42:16 +00:00
d7e8330189
Remove RELOC_SYMBOLICS_THROUGH_JMPSLOT as it's always the case
2000-05-28 01:53:05 +00:00
9816935f22
Remove RELOC_SYMBOLICS_THROUGH_JMPSLOT since it isn't required for VAX (and
...
that's why I added it).
2000-05-28 01:33:58 +00:00
2864a7186a
reclaim transmitted packets on receive interrupts.
2000-05-28 01:28:52 +00:00
a3ab2a3d02
Add/fix FDDI support for NetBSD (& Tru64). [Tru64 has at least one bug left]
2000-05-28 01:27:52 +00:00
a8adcb322c
Don't let an llc be dumped twice.
2000-05-28 01:25:20 +00:00
228570e110
When setting auto-config/rootable bits, only try to update the
...
component label if the component is actually alive.
2000-05-28 01:03:22 +00:00
64ad6c882c
Have raidctl use the fine-grained progress info. ETA calculation stuff
...
needs to be cleaned up.
2000-05-28 00:49:35 +00:00
1aaf6772f1
- Add a mechanism for obtaining finer-grained 'progress' information
...
regarding reconstructs, copybacks, etc.
- RAID 0 doesn't do copybacks, but don't make raidctl sweat about it.
2000-05-28 00:48:30 +00:00
3713246e34
Don't bother searching the qinfifo for SCBs to requeue in the BUSY
...
and QUEUE FULL cases; this is already done for all BAD_STATUS cases.
Make sure to requeue the SCB in the above cases internally in the driver,
the SCSI layer doesn't know how to deal with it properly.
2000-05-28 00:19:59 +00:00
cb5289547f
At least try to do something useful in the XS_BUSY case; don't cause
...
a panic by sleeping in an interrupt context.
2000-05-27 23:59:58 +00:00
6a082e4797
Clear %ebp in the forked child, so we don't try to unwind past it.
2000-05-27 23:01:44 +00:00
8c8608818f
Mention section 9.
2000-05-27 22:49:45 +00:00
a5a054f2c9
Nuke HP_SEG_SIZE. Use NBSEG instead (as used by m68k_trunc_seg() et al),
...
which takes into account the mmu type.
2000-05-27 22:37:47 +00:00
804b61073e
One more formatting nit. *sigh*
2000-05-27 22:34:24 +00:00
a05c70639c
Update the date.
2000-05-27 22:31:57 +00:00
89e229d95c
Fix formatting error.
2000-05-27 22:29:03 +00:00
8d9497c3e3
Document *_EMPTY().
2000-05-27 22:27:33 +00:00
820e777524
Add *_EMPTY() and SLIST_NEXT().
2000-05-27 22:17:54 +00:00
4b7b35ae8a
When a bus is accessed for the first time, reset it. Without this,
...
some devices may not be found if the BIOS (which would normally
do the reset at startup) is disabled. Should really be done from the SCSI
layer.
Implement the SCBUSIORESET ioctl.
2000-05-27 21:58:15 +00:00
5dedafcecd
Add missing semicolon.
2000-05-27 21:46:42 +00:00
26acf7f88a
Only map in map registers and the I/O page if they are not mapped in already.
2000-05-27 21:44:35 +00:00
c1f28b097c
allow to specify relative paths for sections in man.conf - they are used
...
similarily to _subdir, but only when appropriate
fix -m handling, so that e.g. "man -m . 3 printf" works as it should
add new -S flag, to specify a string the result path has to contain
g/c some unused stuff
Written by Chuck Cranor, with only cosmetic changes & const poisoning by me.
2000-05-27 21:33:26 +00:00
8293b12111
Write kvtopte() and kvtophys() as inline assembler. GCC create quite bad
...
code for them, and they are only 2-3 instructions each if written by hand.
2000-05-27 21:17:06 +00:00
f460c85cb3
Remove existing semaphore system locking mechanism and turn
...
sys_semconfig into a placebo system call, to avoid giving folks an
easy way to wedge processes which use semaphores.
NOTE: unlike 386bsd and freebsd, processes which did not have
semaphore undo records would not be affected by this problem (reducing
it from a serious local denial-of-service problem to a largely
cosmetic problem, since virtually nobody uses semaphores). But the
code is just Wrong so we're ripping it out anyway.
2000-05-27 21:00:25 +00:00
22519583f3
Add tadpole specific devices.
2000-05-27 20:56:51 +00:00
26b4598736
Components which match on everything but the mod_counter are
...
renegades, and must be handled correctly. In particular, they should
be added to their old auto-config set, but then immediately released.
Failing to do otherwise means that they potentialy end up in a
different (and competing!) RAID set which may auto-configure in place
of the correct one, and cause all sorts of chaos at auto-configure
time.
2000-05-27 20:29:14 +00:00
6cfde8f146
Remove the pcbtrap global variable, use a per-CPU variable instead.
2000-05-27 20:02:58 +00:00
3a4393ff92
While DM9102A boards tend to have ISV-format SROMs (likely to describe
...
the HomePNA PHY typically connected to the external MII interface),
DM9102 implementations (often found on motherboards) do not. Handle
this.
2000-05-27 19:42:06 +00:00
e9b5b7aa5e
Add a comment to clarify why we actually want the component label to
...
be considered a 'match' even if the mod_counter is wrong.
2000-05-27 19:12:03 +00:00
1033142eea
Truncate the CHS values correctly in case a partition boundary exceeds
...
their range.
2000-05-27 19:02:54 +00:00
2d6c6df05e
add system(3) for spawning the editor - this is handy when EDITOR is set to
...
something like 'editor arg1 arg2 ...'
2000-05-27 19:01:13 +00:00
902ae34ae6
When converting from relsecs to chs, if the value exceeds the maxmimum
...
that can be specified with CHS, truncate it to the maximum values that
the BIOS provided, not 1023*255*63. Some BIOSs get awfully cranky when
you do that.
2000-05-27 18:41:36 +00:00
39c7c9aff6
Change AdwInitCarriers in adwmcode.c
...
Add new AdwInitCarriers prototype in adwmcode.h
All of the supported adapters are now initialized calling a unique common
function
2000-05-27 18:24:50 +00:00
d2b2ed0970
Checking parity re-write status makes no sense on RAID 0, but let's
...
return something reasonable anyway.
2000-05-27 18:23:27 +00:00
46807640c7
Add support for the OPTi 82c621 PCIIDE controller and its derivatives.
...
I only have a Compaq laptop on which to test this, so reports of
success/failure in other systems would be welcomed.
2000-05-27 17:18:41 +00:00
1d2a3e79a9
Regen.
2000-05-27 17:12:36 +00:00
713621eb0e
Add entries for a couple of OPTi PCI-IDE controllers.
2000-05-27 17:11:37 +00:00
7e083f3d75
Add some code to test libraries to make sure they are a.out before adding
...
them to hints.
2000-05-27 17:06:34 +00:00
3ac3c9b124
Oops, omitted the rename from last.
...
Function in this file is db_stack_trace_print(),
not db_stack_trace_cmd().
2000-05-27 16:44:41 +00:00
98d0ab9e1c
Use machine instead of vax in include path.
2000-05-27 16:44:14 +00:00
00369993f9
Whitespace police.
2000-05-27 16:38:02 +00:00
99baa81ae7
Rewrite cpu_fork(), it now looks like and works as other ports' cpu_fork()
...
(calling child_return() etc...). Have fun, Jason!
2000-05-27 16:33:04 +00:00
baea72f7e1
Add new mount option nomaplcase (name taken from Solaris) - if set, file
...
names read from non-Rock Ridge cdroms won't be translated to lower case.
This is functionally similar to -g flag, but the version numbers on files
are still stripped.
2000-05-27 16:32:08 +00:00
oster