33b4b52949
Define the prototypes for rtc_read() and rtc_write() here rather than
...
in machine/rtc.h
Update the rtc_read() and rtc_write() functions to take a private pointer
as the first argument (currently unused).
1998-04-19 03:55:44 +00:00
1f5455aaaf
Update the softc to hold the rtc_{write,write}() argument and update
...
the function pointer prototypes.
Pass the rtc_arg field as the first parameter when calling the todclock
rtc_{read,write} function pointers.
1998-04-19 03:54:24 +00:00
c4f9d5c4b0
Add a rtc argument field to the todclock_attach_args structure.
...
Update the ta_rtc_{read,write}() functions in the todclock_attach_args
structure to take an argument attach time defined argument field as the
first argument.
1998-04-19 03:51:44 +00:00
15901d1be3
Remove rtc_read() and rtc_write prototypes.
1998-04-19 03:49:17 +00:00
effb702da4
Don't explicitly call the debugger on a reset exception. Just print
...
trap frame address and panic.
1998-04-19 03:41:14 +00:00
d4a24f85d6
Support shared Decstation 3100 and Decsystem 5100 baseboard devices
...
using a virtual "ibus" for baseboard devices.
1998-04-19 02:52:45 +00:00
53c671e26c
Add locore assembler functions to read mips3 cycle counter, and
...
read and write compare register (controls cycle-driven periodic interrupt).
Use cycle counter for microsecond time on mips3, but for now only on
3min motherboards (5000/150). the MAXINE baseboard microsecond
counter is more stable and I don't ave no 5000/260 to test.
XXX clkread() is a mess, it should be rewritten.
XXX should add nanotime() to give inkernel nanosecond resolution,
and then microtime() reworked to use nanotime().
1998-04-19 01:48:34 +00:00
4ea6444493
Decsystem 5100 (aka mipsmate aka kn230) support:
...
* dec_5100.c: sysconf, interrupt, and motherboard (drain writebuffer)
support for 5100.
* support for hardware kludge in 5100: sii DMA buffer is hardware
padded to alternate 32-bit words, not alternating 16-bit halfwords.
* 5100 has no framebuffer, console is wired to serial port 0.
With ibus support, boots as far as exec'ing init, and hangs.
1998-04-19 01:27:02 +00:00
fea06d4c21
add back in the old NetBSD changes. Also, add in a PIC GOT
...
offset fix from the snapshot.
1998-04-19 01:05:27 +00:00
f502d8c9f4
sync with EGCS 1.0.2
1998-04-19 01:01:20 +00:00
51183f1bb3
re-import egcs 1.0.2 ARM bits. trying to use the snapshot's bits was a
...
nice idea, but caused more problems than it was worth.
1998-04-19 00:56:34 +00:00
c1a4f8c8ed
Define `xbox'.
1998-04-18 19:03:00 +00:00
92c6f02e55
consistency the rest of the NetBSD/arm32 toolchain: make TYPE_OPERAND_FMT
...
be "#%s". This generates assembly consistent (w.r.t. .type directive)
with asm.h and what the existing compiler generates. (The old definition
was "%%%s", and the assmbler choked on the %'s.)
1998-04-18 19:02:13 +00:00
90b5c246c6
Skeleton code for the SBus expander box.
1998-04-18 19:00:17 +00:00
1882b7131d
You cannot check SHLIB_{MAJOR,MINOR} without <bsd.lib.mk>, but LINKS is
...
needed before <bsd.lib.mk>. Instead, check for shlib_version file.
1998-04-18 15:46:22 +00:00
6958fe8d9a
Get the NO* variables from bsd.own.mk, and then set LINKS accordingly
1998-04-18 15:26:20 +00:00
fb43bb5f19
Add danish keymap.
...
From Soren S. Jorvang (PR kern/5312).
1998-04-18 10:57:13 +00:00
13c6d27696
Fix spelling of my name.
...
Being here, remove BROKEN_INDIRECT_CONFIG.
1998-04-18 10:35:48 +00:00
d58832579d
Fix botched DMA tag initialization.
1998-04-18 10:26:56 +00:00
302692bf8d
Namespace protection: give key description table a more private name.
1998-04-18 09:51:20 +00:00
1745de275b
-Set keyboard (and/or controller) to XT scancode in early console
...
initialzation. Closes PR port-alpha/5303 (Jason Thorpe).
-Namespace protection: give key description table a more private name.
-Make sure "struct pckbd_internal" is completely initialized.
-Improve locator comparition in probe().
-Remove BROKEN_INDIRECT_CONFIG.
1998-04-18 09:49:58 +00:00
a099e8dda5
Initialize the command byte and its shadow register in early console
...
setup so that the keykoard driver can deal with scancode translation
in its console initialization function.
1998-04-18 09:42:20 +00:00
2b6154a68c
Add PCI IDE.
1998-04-18 01:19:40 +00:00
792e89a201
Add PCI IDE goop.
1998-04-18 01:19:08 +00:00
4fc79b8fd3
First cut at PCI IDE compat interrupt support for the EB164 systype.
...
PCI IDE is found on the AlphaPC 164SX's Cypress PCI-ISA bridge.
1998-04-18 01:18:37 +00:00
574b87a792
Initialize the PCI IDE compat interrupt PCI method to NULL; PCI IDE
...
compat interrupts are not currently supported on these platforms.
1998-04-18 01:12:23 +00:00
78c7ebb2d0
Add a second Alpha-specific pci_chipset_tag_t method for establishing
...
PCI IDE compat interrupts. Note that this function is optional, and
platform-specific code may initialize the pointer to NULL.
1998-04-18 01:10:54 +00:00
a5f006fb5f
Fix a typo.
1998-04-18 01:09:20 +00:00
fd0336a792
Add uvm/uvm*.h.
1998-04-18 01:09:08 +00:00
783382095c
Machine-dependent bits for PCI IDE. This redirects PCI IDE compat interrupt
...
goop to the appropriate platform-dependent code.
1998-04-18 01:08:52 +00:00
49e96f3b65
LP64 sweep to compile. Enable build in Makefile.
1998-04-18 00:48:18 +00:00
4a1dac1736
don't warn about PIC code being unsupported, because that always-warn
...
situation with -fpic will always break NetBSD builds (which use -Werror).
PIC code generation seems ... less than perfect, at this time; it still
aborts occasionally.
1998-04-18 00:39:43 +00:00
ce07f954d8
define SYS_SIGLIST_DECLARED in a way that's consistent with config.h
1998-04-18 00:37:33 +00:00
6a4f33b13a
merge changes from 980411 snapshot import. a couple of macros got new
...
arguments, so mark them as XXX and make them compatible with 1.0.2.
1998-04-18 00:32:28 +00:00
39de2f4adb
Import EGCS 980411 snapshot's gcc/config/arm bits.
1998-04-18 00:22:33 +00:00
ef3c228075
Fix the definition of TARGET_VERSION.
1998-04-17 23:54:03 +00:00
7f756d0c18
Rewrite this file (again). Copy the Linux Alpha config, and tweak it
...
to work with NetBSD. Use as many NetBSD common definitions as possible.
1998-04-17 23:50:03 +00:00
00e90d68da
Descend into libexec on alpha, now that uucp will build.
1998-04-17 23:41:55 +00:00
390112ef89
LP64 (64 bit) sweep to make these compile.
1998-04-17 23:39:29 +00:00
c81c51c2f8
add pkgsrc
1998-04-17 21:22:57 +00:00
d3d91d4d63
ns32k specific changes for "our" gcc ported over to egcs by Ian Dall.
1998-04-17 19:41:18 +00:00
f9042ff05b
Guard the PS/2 mouse attachment and ARM7500 IOC check with the
...
CPU_ARM7500 macro.
1998-04-17 18:44:09 +00:00
928943b2ff
Keep all relevant state information in a "pci_softc" so that it is
...
accessible at runtime (for LKMs in particular).
Remove BROKEN_INDIRECT_CONFIG.
1998-04-17 18:40:31 +00:00
e3e48e335a
undef ASM_WEAKEN_LABEL, because the NetBSD/arm32 assembler (or, at least
...
the one that I have) doesn't seem to do the right thing with weak
references, which causes libgcc c++ function lossage.
1998-04-17 18:24:12 +00:00
8a9498f09a
Don't use an 'register char' as an array index, change it to an int.
1998-04-17 17:57:08 +00:00
d15b06459b
Add missing int after an register.
1998-04-17 17:38:14 +00:00
b01eedb761
kill "warning: variable `erred' might be clobbered by `longjmp' or `vfork'"
...
found on arm32 with egcs.
1998-04-17 15:56:14 +00:00
b6a9340ab5
Fix leap_year calculation (1900 wasn't a leap year)
1998-04-17 14:01:56 +00:00
8ab6713503
Fix symlinks creation in the build directory: create the symlinks there,
...
not in ${DESTDIR}.
1998-04-17 13:34:55 +00:00
543407f7ee
use the mi header (dev/pckbc/pckbdreg.h)
1998-04-17 13:09:23 +00:00
mark