8c5e25e486
1010 has clock quadrupler but without PPL, so use SF_CHIP_DBLR.
2001-03-15 17:41:28 +00:00
9ea2b5098b
Preliminary support for SYM53C1010-33 (at 80MB/s only for now), based on
...
patches sent by Matthias Drochner <M.Drochner@fz-juelich.de> and
Kenneth R Westerback <kwesterback@home.com>
2001-03-12 10:00:50 +00:00
3ba997a164
Add the 53c1510d and 53c895a. 1510d confirmed working by
...
Mark Davies <mark@MCS.VUW.AC.NZ>.
2001-01-10 15:50:20 +00:00
851de295eb
Change pci_intr_map to get interrupt source information from a "struct
...
pci_attach_args *" instead of from four separate parameters which in
all cases were extracted from the same "struct pci_attach_args".
This both simplifies the driver api, and allows for alternate PCI
interrupt mapping schemes, such as one using the tables described in
the Intel Multiprocessor Spec which describe interrupt wirings for
devices behind pci-pci bridges based on the device's location rather
the bridge's location.
Tested on alpha and i386; welcome to 1.5Q
2000-12-28 22:59:06 +00:00
435b4c7b35
Fix c896 support. If the first mem bar is 64bit, then the second one will
...
be too. And offset for the 2nd being after the 1st by a 64-bit bar, not
32-bit.
2000-11-29 02:00:38 +00:00
cce4838c1f
Add ram size to struct properties, and pass it to the bus independant part.
2000-10-23 14:57:23 +00:00
b063b2ec36
Separate the sheduler from the main script, allocate another DMA-safe
...
memory page for the sheduler. Put the main script in the on-chip RAM when
available.
Avoid a null-pointer dereference when DSA is invalid.
2000-05-25 10:10:54 +00:00
a1c4db6c37
- split siop_pci in attachements vs helper functions, for comming esiop
...
- add a reset callback to enable PCI-specific features. This improve bandwith
by a factor of 2 on my alpha with a 875 !
- sync copyrigth notice
2000-05-15 07:53:17 +00:00
bouyer