perseant
f1dfdc6927
disklabel now understands the p_sgs partition field (shift to compute
...
segment size from block size).
newfs_lfs now reads the disklabel to find segment, block, and fragment
sizes. Because reading this info from the wrong fs type could result in
very poor fs layout (e.g. ffs has "16" where the segshift would go,
resulting in 512-*megabyte* segments for 8K blocks), newfs_lfs refuses
to create a filesystem on a partition not labeled "4.4LFS".
Man pages for newfs_lfs updated to reflect this change.
2000-01-18 00:02:28 +00:00
msaitoh
7d3068a3b4
use macros
2000-01-17 21:59:43 +00:00
is
d02bc7577d
.em->.Em
2000-01-17 21:57:14 +00:00
msaitoh
c330a893d5
- check whether tv_usec == 1000000, too.
...
- set the reload count of the timer unit 1 correctly
(Timer unit counts from TCOR to 0 (i.e. the length of the counts equals
to TCOR + 1)).
- use macros.
2000-01-17 21:54:32 +00:00
msaitoh
8cf5a56c3f
add some bit definitions
2000-01-17 21:41:13 +00:00
jlam
f4b2073531
bsd.prog.mk doesn't define/use STRIP anymore -- it's now STRIPFLAG
2000-01-17 21:21:55 +00:00
abs
aabd13ef64
Use /var/spool/lpd/XXX as pool directory, not /var/spool/output/XXX
...
Intended to address PR #8551
2000-01-17 18:56:08 +00:00
abs
a4cc9c62f3
remove duplicate += of OBJS, introduced in 1.158 - fixes PR #8487
2000-01-17 18:37:23 +00:00
itojun
e30f445f00
print IPv6 multicast group on -ia (-iav will avoid truncation)
2000-01-17 18:24:37 +00:00
itojun
08de376ec3
fix default route determination for inet6.
2000-01-17 18:03:51 +00:00
bouyer
e51ae5d23a
Use SCSIPIRETRIES instead of hard-coded value '2' for number of retries in
...
common routines. Define SCSIPIRETRIES as 4, so that the command will finally
succeed after several consecutive downgrades from UDMA2 to PIO4.
2000-01-17 17:59:48 +00:00
itojun
ccef23e54a
mask addresses properly on netstat -inv.
...
From: Matt Thomas <matt@3am-software.com>
2000-01-17 17:54:56 +00:00
augustss
f7145f672e
Add USB-Ethernet adapters.
2000-01-17 17:47:03 +00:00
augustss
5fe2bec33e
Add Bill Paul's FreeBSD driver for the CATC USB-EL1201A chip.
...
XXX The driver is untested since I don't have any hardware with this chip.
2000-01-17 17:12:20 +00:00
pk
725c6438c1
Use bus_space(9) functions to access the controller registers.
...
Add probes to the attach routines before poking the chip to see
where the registers are located.
2000-01-17 16:57:15 +00:00
pk
2d7f7ef7a6
Use bus handle to in `struct fdio' to read the chip registers.
2000-01-17 16:53:18 +00:00
pk
611f7a9938
Add offset to bus handle in `struct fdio'.
2000-01-17 16:52:04 +00:00
itojun
7ab6c9ab36
add IPv6 items.
...
s/ippcp/ipcomp/ for #108 , as
http://www.isi.edu/in-notes/iana/assignments/protocol-numbers
lists it as ipcomp, not ippcp.
2000-01-17 16:39:37 +00:00
ad
869cdcbbcc
It seems that the ECC formatted disk/array breakage is to do with broken
...
firmware and HBAs. salyzyn_mark@dpt.com writes:
> If the card does not have (DPT) ECC memory, the card will necessarily
> not hide the block size. The PM2041 can not hide it, and some versions of
> the Firmware on the PM3334 also fail in this regard.
2000-01-17 16:34:44 +00:00
kleink
abe336bfe1
Add <machine/math.h>.
2000-01-17 16:31:34 +00:00
kleink
6910891781
Add NAN constant glue for sh3.
2000-01-17 16:27:53 +00:00
kleink
34c7685f30
Adjust for little endian environments (confirmed by msaitoh).
2000-01-17 16:21:36 +00:00
minoura
9a0577db94
Wrong () balance in dumpsize calculation.
2000-01-17 16:17:32 +00:00
itojun
65d8ab7ea0
IPv6 support.
...
NetBSD PR: 9199 (with minor changes)
2000-01-17 16:14:39 +00:00
itojun
2705db0080
do not filter address families that are not supported by kernel.
...
the behavior was introduced in 1.8 -> 1.9, by itojun, and it was
not a correct behavior.
even if we may be able to connect to the the returned addresses,
filtering them out is not a correct thing to do. for example, even if
you have partial unreachablility in IPv4, gethostbyname(3) will return
IPv4 addresses in the unreachable network nonetheless.
2000-01-17 15:57:29 +00:00
hubertf
bd2e491091
make confusion of ISO 639 and ISO 3166 less likely
2000-01-17 15:51:59 +00:00
abs
8033b76e4e
Mention you usually do not need to enter terminal type on login
2000-01-17 15:14:19 +00:00
augustss
57a4fc9141
Regen.
2000-01-17 14:56:23 +00:00
augustss
3285aaa9dc
Add a bunch of devices I found at a Linux site.
2000-01-17 14:56:01 +00:00
augustss
28c8d7c7bb
Remove some unnecessary cleanup.
2000-01-17 13:25:22 +00:00
augustss
3205164ec5
Add missing USBD_NO_COPY flag.
2000-01-17 13:23:05 +00:00
augustss
3e2f6f3a41
Regen.
2000-01-17 12:57:54 +00:00
augustss
5ebe8e5553
Add two CATC Ethernet adapters.
2000-01-17 12:57:27 +00:00
joda
2367ad5f3d
add shutdown hook
2000-01-17 12:57:26 +00:00
wiz
6ed33701a8
fixed typo in example (fixes PR 9023)
2000-01-17 12:44:39 +00:00
shin
af0112be28
move keymap initialization into vrkiu_init().
2000-01-17 12:22:37 +00:00
abs
0f75dd5dc4
allow ioctl() on all scanner device nodes - now SANE can work with ss* driver
2000-01-17 11:25:31 +00:00
itojun
79641939e0
remove #if 0'ed sections.
2000-01-17 08:34:04 +00:00
itojun
88d175cdc4
sync with latest KAME tree.
...
add example section to get{addr,name}info.
s/\.Os KAME/.Os/.
2000-01-17 08:33:45 +00:00
bgrayson
2a09ca64fd
Added sysctl examples (read-only sysctls for now)
2000-01-17 07:22:45 +00:00
bgrayson
4760c9fa1b
Fix bug where NULL pointer wasn't checked before dereferencing
2000-01-17 07:21:54 +00:00
bgrayson
417d43539a
Remove unneeded syslog() at unmount
2000-01-17 07:21:25 +00:00
itojun
e9100143aa
in promisc mode, don't inject outgoing packet to bpf twice.
...
this is because the card gets the outgoing packet from itself in promisc mode
(not really IFF_SIMPLEX).
2000-01-17 07:06:57 +00:00
itojun
3867d18179
we don't need IFF_RUNNING for gif.
2000-01-17 06:29:07 +00:00
itojun
2042e749ad
for gif interface, sync IFF_RUNNING with IFF_UP. it does not
...
make sense to leave IFF_RUNNING during !IFF_UP (it is pseudo interface
so we need to immitate - or is it okay if we don't raise IFF_RUNNING?)
2000-01-17 05:50:12 +00:00
itojun
82070bab0c
note sysctl(8) pathname change into "1.4 -> 1.4x changes" section.
2000-01-17 05:33:14 +00:00
matt
9546ee5f87
defopt VAX750 side effect.
2000-01-17 04:57:31 +00:00
matt
2665d4b7c6
defopt VAXnnn so the make depend does the right thing.
2000-01-17 04:55:25 +00:00
itojun
fc838249f5
don't install /usr/sbin/sysctl (backward compat symlink)
2000-01-17 04:22:59 +00:00
sato
114d690d03
delete unused codes.
2000-01-17 04:06:06 +00:00