f1d623f2f2
Some corrections regarding boot file and path (suggested by cgd)
1996-06-19 16:08:34 +00:00
587d8cc1f5
Explain why the HP printers fail and how to work around the problem.
1996-06-19 15:15:40 +00:00
2a6455604b
Minor fixes sent in since bootp-2.4.3 release:
...
Correct length arg to haddrtoa() in report of duplicate address.
The string value for a generic tag should not include the null.
(Including the null in reponses really annoys HP printers!)
When reading hardware addresses, allow colon separators
(only works if the whole H/W address is in quotes).
1996-06-19 14:52:34 +00:00
187edb5fa8
Insert pause after disklabel blurb.
...
Remove `-v' from binstall.
1996-06-19 14:18:40 +00:00
0719964575
Typos I thought I killed before.
1996-06-19 14:16:25 +00:00
dba83379bd
Remove a "notyet" in last commit.
1996-06-19 13:30:49 +00:00
c7fc34ac08
add tcx device at major number 109
1996-06-19 13:28:14 +00:00
3da87417d2
tcx declaration
1996-06-19 13:25:01 +00:00
5f5407c39e
add tcx
1996-06-19 13:23:25 +00:00
c6d4bf55e3
Add tcx definition.
1996-06-19 13:21:09 +00:00
f62f900f6c
First go at a TCX framebuffer driver. This version does enough to
...
load and store colour lookup tables
blank the screen / put monitor in power-saving mode
make X11 run on it in `cgthree' emulation.
1996-06-19 13:17:35 +00:00
62d4acd78d
snprintf() adds the last nul for us
1996-06-19 08:17:49 +00:00
08847f7836
use strncat/snprintf
1996-06-19 06:02:24 +00:00
758ea43e99
Completely revamp setroot() and friends. Since Chris' version of this code
...
is close to how I reworked it, I pulled in the (essentially MI) NetBSD/alpha
and added the appropriate support around it.
- No need for the GENERIC kernel config option.
- NFS-mounted root and swap are supported.
- If we can't figure out where the root filesystem is from what the Booter
tells us, ask the user.
- Split the mainbus autoconfig code to a separate file.
Also, update/add copyrights as appropriate.
1996-06-19 03:21:03 +00:00
37472fd212
Remove Alice copyright.
1996-06-19 02:20:54 +00:00
09eef8070d
Remove Alice copyright and comment from '92.
1996-06-19 02:19:13 +00:00
6c3aabe226
Update some comments, and the copyright
1996-06-19 01:47:28 +00:00
506cefab8c
In the sync case of bwrite(), move the accounting earlier so that so that the
...
delayed write is logically converted to a sync write, mirroring the async case.
In bdwrite(), move the tape case earlier to avoid needless reassignbuf()s.
1996-06-18 20:50:23 +00:00
40cd9f0062
During the data type cleanup, a bug crept in in the code handling mbufs with
...
odd length. This would lead to corrupt data sent.
1996-06-18 20:50:00 +00:00
bb531c94ea
General cleanup
1996-06-18 20:32:25 +00:00
1d4349e7c8
ypset(8) stopped working; reason:
...
xdr_ypbind_setdom() would always fail because the test for
xdr_ypdomain_wrap_string() was reversed. Fixed this and in
the process made all the function tests to be of the form:
if (!xdr_foo())
return FALSE;
....
return TRUE;
instead of having some of them like above and others like:
if (xdr_foo() == FALSE)
return FALSE;
...
return xdr_bar();
this is more consistant now and hopefully in the future people
will pattern match correctly and not introduce spurious errors.
1996-06-18 20:05:59 +00:00
14cd82db79
Minor formatting update.
1996-06-18 17:45:24 +00:00
3a5ebfc1d7
paths are specified as server:/path and the server and path are both
...
returned.
1996-06-18 17:30:16 +00:00
a2b74a415d
Several minor changes to make cross-compilation easier.
...
(I do most compiles on a sparc these days...)
1996-06-18 16:18:34 +00:00
a8e5b5ba47
Remove some unneeded FIFO flushes and reorder some register changes per the
...
6360 manual. Turn off synchronous negotiation.
1996-06-18 16:13:05 +00:00
d3b59f36ab
Add the field "pcb_mmuctx" for future use by the pmap code.
...
(This will make later update of the pmap code much easier.)
1996-06-18 16:03:45 +00:00
202bd8b9ae
Turn off *DIAG by default.
1996-06-18 12:55:00 +00:00
ca95e90fca
Insert filesystem type in munge_fstab.
...
Don't `ifconfig down' an active network interface (bad for diskless setup);
but use it to cull default IP address and netmask.
1996-06-18 12:50:56 +00:00
59bbde87bc
Don't use the inline assembler 64bit integer division if our kernel might
...
run on 68060. Some graphics boards need delay() in early initialization (that
is, before initcpu() was called.
1996-06-18 11:41:48 +00:00
2c4c524e54
Use -S rather than -x for "normal" link flags.
1996-06-18 11:12:32 +00:00
1301d25702
Pull down from release. Sorry, should have been the other way around....
1996-06-18 11:10:04 +00:00
60f46fb10b
Increment the boot block version.
1996-06-18 07:51:26 +00:00
584f242944
Don't advance to the next default name if the user typed something.
...
Make gets() return void.
1996-06-18 07:47:02 +00:00
398b638fbb
Add comments on #else and #endif. Move #ifndefs outside of comment blocks.
1996-06-18 07:17:47 +00:00
b360b90a92
Save %esi and %edi around BIOS calls. Also, reference arguments through
...
%esp rather than %ebp, to avoid needing to change %ebp on entry.
1996-06-18 07:03:44 +00:00
cf50b9a115
Add fpfault & bus error handling corrections from Ignatios Souvatzis.
1996-06-18 06:13:46 +00:00
f2d34a2c9a
Compare device types with strcmp(). Remove special case for `wt'.
1996-06-18 06:10:33 +00:00
8a706cd17f
Add a ONEDISK option to elide the getc().
1996-06-18 06:06:38 +00:00
0ca0eeec5f
Clean up the install target.
1996-06-18 06:05:44 +00:00
d84f4c4b18
Add tty_attach() calls.
1996-06-18 05:54:59 +00:00
36720c448c
Use the BIOS memory sizes passed in by the boot program, to preserve the BIOS
...
data area.
1996-06-18 01:53:07 +00:00
c893f3f107
{,r}cd0c's minor number was wrong; fix. Make all device nodes for
...
'cd', just like for 'sd', 'vnd', and 'ccd'.
1996-06-18 00:35:43 +00:00
bf7ab63c97
Move some of the DMA engine initialization from the "start" routine
...
to the "setup" routine. Doing the initialization earlier prevents
nasty race conditions where the 5380 prefetch changes the counter.
1996-06-17 23:21:29 +00:00
b298c40fbe
Call reassignbuf() at splbio in bdwrite().
1996-06-17 22:21:31 +00:00
b2dca977c5
FPA probe would always return zero, because of incorrect return statement.
...
Patch provided by Peter Galbavy in PR 2555.
1996-06-17 18:29:18 +00:00
cb40dc44d0
two devices instances which are otherwise the same but do not attach
...
via the same attributes are _not_ the same, and should not be treated
as aliases of each other.
1996-06-17 18:21:35 +00:00
dc066b6a10
KGDB support
1996-06-17 15:40:36 +00:00
af3f9266db
Correct return type of boot() and reboot2().
1996-06-17 15:27:16 +00:00
3274834c18
Use the PROM->input_source setting instead of EEPROM to determine
...
where the console is, because that is correct if, for example, you
boot with the diag/norm switch set for diagnostics and the EEPROM
is set for keyboard/display.
1996-06-17 15:17:06 +00:00
f0367c0602
first commit of x68k related document.
1996-06-17 11:26:04 +00:00
gwr