lukem
f1b836d0c9
Remove http://members.hyperlink.net.au/~chart/pci.htm link; it doesn't
...
exist anymore.
Add some more ServerWorks devices
2003-10-18 01:32:30 +00:00
uwe
15e3e96e71
Config glue for adc(4).
2003-10-18 01:29:05 +00:00
uwe
721e6868b8
Driver for analog->digital converter in sh7709.
2003-10-18 01:27:18 +00:00
nathanw
db40e00241
Implement regset routines.
...
Pass the LWP of the ptid in PT_{GET,SET}REGS calls.
2003-10-18 00:27:13 +00:00
nathanw
614f188f9d
nbsd_reg_to_internal() and friends are obsolete.
2003-10-18 00:14:09 +00:00
nathanw
37337ad2db
Pass the LWP of the ptid in PT_{GET,SET}REGS calls.
2003-10-18 00:13:35 +00:00
nathanw
fef0da346a
Revert a local change that nbsd-thread.c now handles.
2003-10-18 00:11:51 +00:00
nathanw
804ad776be
Pile of cleanups and improvements, including:
...
* Use {fill,supply}_{g,fp}regset() routines instead of homegrown
nbsd_internal_to_reg()/nbsd_reg_to_internal() routines; reduces
local changes to *-nat files.
* Use the ptrace(PT_LWPINFO) call to find the set of LWPs in a
process and map them to threads, and to identify the target of a
signal event.
* Consistency sweep on ptid-manipulating macros.
* More modern GDB integration and removal of redundant functions.
2003-10-18 00:08:14 +00:00
enami
d182626b85
Test the value returned by realloc() rather than anything else.
2003-10-17 22:59:35 +00:00
enami
52b6a13784
Print ips_rcvmemdrop and ips_nogif.
2003-10-17 22:28:11 +00:00
matt
3575370e0a
Remove worthless load.
...
Save curcpu before doing uniprocessor dispatch.
2003-10-17 22:21:38 +00:00
wiz
54e541b387
regen (+Xr grf 4).
2003-10-17 22:11:48 +00:00
wiz
3025e2fc16
regen (-ed)
2003-10-17 22:11:25 +00:00
wiz
11639fb42c
Bump date for previous.
2003-10-17 22:05:27 +00:00
thorpej
b0bced8029
Store the number of EEPROM address bits in the softc.
2003-10-17 21:12:48 +00:00
matt
12ecf72b47
Don't zero curlwp/curpcb in cpu_switchto.
...
Use correct register in the store conditional.
Add DIAGNOSTIC check for null curpcb on cpu_switch exit.
2003-10-17 21:08:57 +00:00
thorpej
2d858d3912
Add internal representation for i82545 rev 3, i82546 rev3, i82541,
...
i82541 rev 2, i82547, and i82547 rev 2.
2003-10-17 20:57:32 +00:00
thorpej
e3ca7c2c73
Make the "align tweak" factor per-interface (since the MTU is per-interface).
2003-10-17 20:41:21 +00:00
enami
bae9643b84
Increment stats when packet is dropped since there is no room
...
to put all fragments in the interfaces's send queue. Some large
UDP packets are dropped here and administrator may want to bump ifqmaxlen.
2003-10-17 20:31:12 +00:00
cdi
61da4642b8
Introduce null console. This pseudo device acts as a normal console with the
...
exception that it discards any output, and is useful for booting the kernel
on headless boxes.
2003-10-17 20:27:38 +00:00
fvdl
c8c91c50dd
Correct VM_MAXUSER_ADDRESS definitions, it was wasting a few pages.
2003-10-17 20:27:00 +00:00
matt
67ab911529
Add a KASSERT() to verify the pcb is not NULL.
2003-10-17 19:56:18 +00:00
jdolecek
1af201c35f
g/c ed0/ed1 nodes, the hardware is not present on amd64
2003-10-17 19:22:58 +00:00
jdolecek
ad4acc4abb
allow also tty[0-9] for serial ports, they are convenient synonyms
...
for tty0[0-9]
as pointed out by David Laight
remove spaces between makedisk_p*() functions, so the output script looks
neater once some of them are filtered out
2003-10-17 19:06:33 +00:00
jdolecek
edf6a76108
improve error checking, and bail out early, instead of looping
...
when filtering the template, leave only the wanted makedisk_p*() routine
in the output
as pointed out by David Laight
also make it mandatory for MACHINE and MACHINE_ARCH to be set in
environment; it would be possible to use use uname -p/-m, but better
to catch possible cross-build mistakes sooner than later
2003-10-17 19:01:49 +00:00
christos
7bd301151f
When searching backwards don't include the characters after the cursor in
...
the search.
2003-10-17 18:49:11 +00:00
cdi
d65b10404c
Change console code to use cninit() and null console. Add serial console
...
check.
2003-10-17 18:20:10 +00:00
cdi
2b3e81f067
Introduce null console. This pseudo device acts as a normal console with the
...
exception that it discards any output, and is useful for booting the kernel
on headless boxes.
2003-10-17 18:16:42 +00:00
tsutsui
3a646e9b6c
Add some delay before calling comcnattach() to wait
...
previous console output to complete.
2003-10-17 18:15:52 +00:00
jdolecek
20282f8b2e
change minor of /dev/zero for ARM ports to 12, so that it is same as on other
...
ports; follows the kernel change
2003-10-17 17:56:28 +00:00
tsutsui
f7772c7c77
- No need to set VR_TXCTL_TLINK in vr_start() because all TX buffers have
...
only single segment.
- No need to set VR_CMD_TX_ON in vr_start().
- Initialize BCR0 and BCR1 registers.
- Change RX DMA threshold 128bytes.
Mostly from FreeBSD via OpenBSD.
2003-10-17 17:42:35 +00:00
tsutsui
19e183345a
Add vr at pci and dmphy at mii. Tested on my O2.
2003-10-17 17:18:16 +00:00
fredb
45acbd9baf
ntp-4.2.0 is released.
2003-10-17 16:57:16 +00:00
mycroft
568ccf202d
Add a comment explaining the INQUIRE behavior.
2003-10-17 16:44:48 +00:00
tsutsui
631fad8686
Misc cosmetics.
2003-10-17 16:39:09 +00:00
fvdl
5b12e0425d
Put the ucontext pointer in %r15 for signal delivery, so that it is
...
saved across the handler call.
2003-10-17 16:24:31 +00:00
fvdl
2b9ab2aab8
Get ucontext pointer back out of callee-saved register %r15.
2003-10-17 16:23:20 +00:00
tsutsui
0a3ddecb47
Use common PCI macro/functions for PWRMGMT.
2003-10-17 16:00:43 +00:00
wiz
432d3289ba
Bump date for previous. Replace > with \*[Gt].
2003-10-17 15:33:23 +00:00
yamt
818ef92da6
add comments and tweak code a little for readability.
...
(no behaviour changes)
2003-10-17 14:20:12 +00:00
sekiya
a747a8f16d
Mouse port offset was incorrect.
2003-10-17 12:43:08 +00:00
sekiya
4762dcf39b
Bring the sgimips MD code into sync with the rest of the ports.
2003-10-17 10:58:16 +00:00
dyoung
0f78752f52
Awk prefers regex escapes to look like \\ instead of \. Go figure.
...
This patch squashes hundreds of annoying warning messages:
awk: cmd. line:1: warning: escape sequence `\.' treated as plain `.'
2003-10-17 09:51:24 +00:00
wiz
c9317ea9c9
Misc markup fixes (avoid \f.); sort sections; use standard section headers;
...
drop trailing spaces; sort SEE ALSO; no content change.
2003-10-17 09:42:42 +00:00
keihan
5062de16fc
Add BGP, GPU, IC, MAC, PTLA, RGB, TLA and fix CPU.
...
OK'd by salo@
2003-10-17 08:56:39 +00:00
sekiya
af12cdb68a
Compile dsclock_hpc.c only if dsclock is present in config file.
2003-10-17 06:49:34 +00:00
lukem
3f725c3c63
ccdconfig(8) CCDF_NOLABEL support
2003-10-17 05:25:10 +00:00
lukem
3f580214e5
Support CCDF_NOLABEL. Document what CCDF_UNIFORM actually does.
2003-10-17 05:23:56 +00:00
lukem
0b441623fe
Add user flag CCDF_NOLABEL to prevent the on-disk label from being read
...
during CCDIOCSET.
Use this when creating a new ccd to ignore any existing disklabel
which is probably wrong.
2003-10-17 05:16:15 +00:00
sekiya
2a1438cc36
Add myself to list of developers.
2003-10-17 04:45:40 +00:00