6a7dd372b3
Do what we should have been doing long ago; use /dev/console by default as the
...
boot console tty, so that the console is on the same place that the kernel
dmesg output goes, whether wscons or serial. Users who want to use tty00
or ttyE0 explicitly can change /etc/ttys themselves.
Also use "vt100" as terminal type for /dev/console (for a reasonable baseline
that also works with wscons; pccons is long since no longer default).
This addresses PR install/13249, i386-specific, but may be appropriate to
apply to all ports.
2001-06-19 20:06:46 +00:00
e3dc57afeb
Make also ed1 for 'all', create ed0, ed1 for 'floppy'
2001-06-17 11:48:09 +00:00
17e856341b
Add GENERIC_DIAGNOSTIC to the list of kernels to be distributed.
2001-04-21 20:56:50 +00:00
30f8b9b5fd
add ed disk (MCA ESDI disk)
2001-04-19 07:49:00 +00:00
62b732f7ac
Add ALTQ control devices.
2001-04-05 23:04:10 +00:00
8d75ab98d3
Add a driver for the Mylex DAC960 family (including DEC SWXCR).
2001-02-04 17:05:11 +00:00
fd6a417d77
Group isdn devices, so "sh MAKEDEV isdn" will create them all.
...
Add apropriate entries to the archs that already have isdn support
enabled in their cdev array.
2001-01-08 06:21:19 +00:00
7b07af406e
Add ISDN devices.
2001-01-06 13:47:44 +00:00
0ce4a9a0de
Use highest bit of minor as an extra bit for the partition number to
...
bump the maximum partition number on NetBSD-i386 to 16. (Approved by fvdl)
2001-01-02 23:06:54 +00:00
47a48d2057
Add two more SCSI disks for the floppy. See PR 9912.
2000-12-19 22:39:34 +00:00
02031bda76
Add MAKEDEV support for Cyclom-Y multiport serial boards. Driver
...
support was already in $MACHINE/$MACHINE/conf.c.
2000-12-05 18:18:04 +00:00
0889c2ba96
Make iop device files.
2000-12-03 13:23:12 +00:00
da9feda63a
Remove watchdog before creating it. Keeps the same behavior as the rest of the creates
2000-11-30 07:33:52 +00:00
57ea462da2
lsu -> ld, by popular request.
2000-11-26 17:44:02 +00:00
0c8f484437
Make the `watchdog' device node.
2000-11-05 02:13:35 +00:00
23f6f01a0d
ca -> lsu
2000-10-19 14:35:41 +00:00
517687da81
Get the major no right for uscanner.
2000-10-14 12:36:05 +00:00
2e9564263d
Enable building of additional kernel sets.
2000-10-02 12:51:33 +00:00
a912989e45
Add INSTALL_LAPTOP to kernels to be built.
2000-09-27 20:05:54 +00:00
8e735041d9
Prepare for USB scanners, and add Rio 500 support while messing.
2000-09-23 04:27:17 +00:00
b4b75848de
Add standalone "iso-image" target that can be run with DESTDIR and RELEASEDIR
...
set in src/etc after a "make release" in both "src" and "xsrc", to create a
ISO-image of the release in $RELEASEDIR/installation/cdrom.
Hook for architecture dependent pre/post-processing in etc/etc.*/Makefile.inc
are available as 'iso-image_md_post' and 'iso-image_md_pre', see
etc/etc.i386/Makefile.inc as an example. Might be useful for setting up
bootable CDs on alpha, sparc, ...
Reviewed by Todd Whitesel and Thomas Klausner.
2000-09-11 21:53:30 +00:00
2ea44b1dd4
install dosboot.com in the release(7) hierarchy.
2000-08-23 21:00:46 +00:00
ee4a3af175
This should be the final part of moving to 64 PTYs by default. Added
...
entries for tty{r,s}{0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f} to /etc/ttys.
Thanks to Matthew Green for pointing out the need.
2000-08-12 13:43:40 +00:00
e36c17d6c2
Have port-i386 use installation/floppy, for conformance with release(7).
2000-08-11 09:20:38 +00:00
3e53e60091
Really, we don't need a 2nd pty0 in the floppy target.
2000-07-27 19:09:57 +00:00
db8e04e0f8
Move to a default of 64 PTYs in "all" targets. Normalize "floppy" and
...
"minimal" targets to use 16 PTYs.
2000-07-27 18:43:14 +00:00
81a51455cd
Fix brain'o in last, pointed out by Johan Danielsson.
2000-06-25 16:25:33 +00:00
685a0649a8
lm* -> sysmon
2000-06-24 00:43:26 +00:00
a32605d17c
pcvt is gone and therefore ttyv[1-7] as well.
2000-06-11 09:13:51 +00:00
63698a2c60
Revert to decemal numbering. From talking w/ Jason, we really should
...
support more than 256 ports. That would mean 3 digits in hex, and I
don't want to write the script for that..
2000-06-09 17:58:29 +00:00
00ee1c57fc
Cyclades-Z tty's are now ttyCZ??, not ttyCZ????. Add support for them
...
to macppc's MAKEDEV.
2000-06-09 16:59:03 +00:00
0377727ee6
Fix typo in last commit.
2000-06-04 09:34:58 +00:00
306acd3e78
Handle "bktr" related devices like audio devices:
...
- Create device nodes with numbered names (e.g. "tuner0").
- Create softlinks with unnumbered names (e.g. "tuner") pointing to device
nodes of unit 0.
2000-06-04 09:34:06 +00:00
e3fc70bd16
Add a ttyaction file for port-i386 that properly sets the ownership
...
on the console device when you log in using wscons on the console.
Why haven't we had defaults for this all this time?
2000-06-04 00:04:59 +00:00
adbdfe4a4e
Fix this so that release notes are build properly upon `make release'.
2000-05-28 17:31:27 +00:00
75db01943c
Add `ses' devices.
2000-05-22 17:01:30 +00:00
41b9e77eff
MAKEDEV goo for Cyclades-Z multi-port serial.
2000-05-17 18:14:10 +00:00
ce6e7b1e81
Add tun2 and tun3 to the all target and create the ugen0 devices in the
...
usbs target.
2000-05-07 19:15:21 +00:00
d690122a5e
add devices for bktr; also add them to all target
2000-05-07 01:39:27 +00:00
5c2de4c3fa
Build INSTALL_SMALL.
2000-05-06 05:31:58 +00:00
0f7d1d56ff
Add a comment about urio.
2000-05-02 12:01:13 +00:00
7eb7e0a9cd
Make urio(4) device node.
2000-05-02 11:59:40 +00:00
9e96565f2e
pcmcia modems end up at com3 with a GENERIC kernel, so create a tty03 in std
2000-04-29 00:10:37 +00:00
c4ae664105
Revert last two changes. As pointed out by enami tsugutomo, snap_md_post
...
is the wrong place to do the splits, as the tar files are not yet made!
2000-03-29 23:47:53 +00:00
a1e356450f
Uncomment out the CD-ROM entry and remove outdated comment for the
...
reason why it was commented out.
2000-03-29 03:43:32 +00:00
630e63cb47
Don't include ${RELEASDIR} in INSTALLATION_DIRS. Error pointed out by
...
Urban Boquist in PR install/9689.
2000-03-28 16:26:30 +00:00
7b0e557100
Build the split sets in place on "make release".
2000-03-26 15:48:22 +00:00
d52bc434ce
Device entries for ca(4).
2000-03-16 14:58:09 +00:00
327c7e4af9
add lm0 to 'all' target
2000-03-07 17:55:06 +00:00
9e721e2455
Don't use grep to find if we have fdesc mounted. case is faster and
...
works without having /usr mounted.
2000-03-01 19:03:17 +00:00
ab5e19cc9f
Make /dev/usb, a node where USB events can be read.
...
Also add ttyU to hpcmips.
2000-02-29 19:07:41 +00:00
66ee7c2e15
No need to make audio devices twice in all.
2000-02-29 18:48:05 +00:00
a41f67cc02
Add `lm*' for LM7[89] hardware monitor
2000-02-25 02:35:49 +00:00
01b2f6e1de
Sum the floppy directory, too.
2000-02-20 03:38:04 +00:00
58895df429
Clean up a bit.
2000-02-20 03:11:12 +00:00
cac7cebd3e
- rename (revert) normal memory disk device name /dev/mdX -> /dev/mdXa
...
- now raw partitions are used for memory disk ioctls
2000-01-21 12:28:22 +00:00
868dc892af
Put a copy of GENERIC in the kernel directory, too.
2000-01-19 08:36:30 +00:00
72a5ed2e26
allow "sh MAKEDEV ttyNN", where NN is 00 to 99.
...
single-digit "sh MAKEDEV ttyN" works in backward-compatible way.
XXX should bring it to other ports as well?
2000-01-09 02:37:06 +00:00
e2c4e62e16
Correct md* entries.
1999-12-18 03:09:44 +00:00
47523083ea
support fully qualified machdep names.
1999-12-15 05:23:13 +00:00
a87378c54a
Prototype file that selects i387 if the fpu is present.
1999-12-13 10:17:49 +00:00
eafd8f707f
Provide some more automation in the "make release" process. Also build
...
and install:
o INSTALL and INSTALL_TINY kernels (for boot floppy images)
o GENERIC_TINY kernel
o Boot floppy images
Ideas borrowed from etc/etc.sun3/ setup.
1999-11-09 00:22:39 +00:00
652f0f8841
Back out previous
1999-10-18 22:41:23 +00:00
993ac32fff
Final chown user.group -> chown user:group changes.
1999-10-06 22:26:14 +00:00
018c7b4f42
Tidy up comments a bit, to make the manpages generated from the a bit
...
nicer. Also, add a comment on how to re-generate the manpages if the
MAKEDEV file was changed.
1999-09-18 00:23:35 +00:00
62d46f73e8
Improve the USB comments.
1999-09-15 21:18:10 +00:00
bcf1e2dcad
Add a comment about ttyU*.
1999-08-27 14:13:32 +00:00
5ca2c8ac27
Make creation of wsmux devices a little less confusing.
1999-08-25 23:06:46 +00:00
243ba7a176
Rename umodem to ttyU. If it walks like a tty and quacks like a tty
...
it's a tty.
1999-08-17 20:06:57 +00:00
db574ba708
Add umodem device.
1999-08-16 22:27:08 +00:00
595da53663
Make wsmux devices.
1999-07-29 19:24:37 +00:00
735b324857
Add "audio" target to create links "audio", "audioctl", "mixer" and
...
"sound" pointing to the first unit's device nodes.
1999-07-12 09:33:59 +00:00
412733582c
typo
1999-06-09 01:45:49 +00:00
efffa3db54
Make sure fd is a directory before we df it.
1999-06-09 01:39:29 +00:00
7658a91815
Create *wd[23]? device nodes, so that machines with more than two IDE
...
drives can be installed.
XXX The 1.4 single-floppy install has only 24 free inodes, but 32 are needed
by this. Some more work is needed (e.g., change newfs parameters for the
ram disk, or switch back to a 2-floppy install).
1999-05-31 11:14:07 +00:00
a3f17d2959
Don't barf when we have fdesc mounted. Just skip the devices fdesc provides
1999-05-28 21:00:50 +00:00
7c5c9764b5
turn off ttyE[123] by default -- default installs don't configure them.
1999-05-01 00:23:27 +00:00
202cdd3fa1
build audio[0123] links.
1999-03-26 04:37:29 +00:00
1fad0940a8
Need pseudo-ttys on INSTALL disk now (due to sysinst).
1999-03-09 19:31:00 +00:00
7d1e96cc2f
Update all this crap so that `make snapshot' makes snapshots in release(7)
...
format, rather than in some unknown format. Also clean up the code a bit,
remove some code duplication, and add documentation to the Makefile.
1999-02-05 03:01:49 +00:00
275e4ce247
wscons is default now - replace the "ttyv0" getty by a number of
...
"ttyEn" lines.
Thanks to "Johnny C. Lam" <lamj@stat.cmu.edu> for pointing out.
1999-02-02 14:33:04 +00:00
37ac3cf82a
Add an entry for 2.88MB floppies, even though we can't write them
...
directly yet. Useful for El Torito bootable CDs, though.
1999-02-01 20:20:00 +00:00
93fc448539
Add tty2 to 'all' and 'floppy' targets (that's how a PnP or pcmcia modem
...
will get called with a standart kernel).
1999-01-27 10:26:08 +00:00
d7ec8ee3a8
Because PCVT only offers 8 virtual consoles by default create only 8
...
device nodes. Fixes PR port-i386/6876 by Scott Telford.
1999-01-25 21:44:22 +00:00
a6e0ab6a8c
On platforms that have GENERIC kernels containing 'bpfilter 8' or greater,
...
create at least eight bpf dev entries. (All except atari).
1999-01-16 01:40:27 +00:00
3b8254b9e8
add "ttyEcfg" (for display-global wscons configuration)
1999-01-13 17:41:44 +00:00
d31303074e
Make ugen devices. None are created by default.
1998-12-09 01:11:26 +00:00
034bc394ac
Add wscons to `all' since its absence annoyed perry.
1998-12-07 18:46:27 +00:00
8bfd722a35
Added RAID devices for everyone!
1998-11-13 04:49:01 +00:00
7490553d67
Add /dev/scsibus* device nodes.
1998-10-15 21:22:51 +00:00
e72f64b7ee
Nuke symlink /dev/ttyv0 -> /dev/vga It isn't needed any more.
...
(If any linux emulation needs this, it can go in the linux emul
directory in the emulation package.)
1998-10-12 21:05:24 +00:00
03cde6e019
Use "${MAKE}" instead of "make" for cross compilation.
1998-10-09 10:40:59 +00:00
86c53e4e63
/dev/cfs* for Coda.
1998-09-14 16:06:27 +00:00
78f049b041
Make some MIDI devices.
1998-08-13 12:44:11 +00:00
48bae9ee88
Add MIDI support. The MIDI devices can be accessed as ``raw'' through
...
the /dev/rmidiN devices, or with a sequencer interface via /dev/music.
So far the only supported MIDI device is the MPU401 port on SoundBlaster
(and only on SB on isapnp, since we do not have locators with multiple
values yet).
1998-08-07 00:00:55 +00:00
fef5ca08bf
Use `wsmouse' and `wskbd' rather than `wms' and `wkbd', and make some
...
wskbds in the `wscons' meta-target.
1998-08-03 11:43:14 +00:00
e9ae0b13b4
Nuke ums and ukbd (USB mouse and keyboard), add wms and wkbd (wscons dito).
1998-07-27 18:49:43 +00:00
5a25642848
Add some comments about USB and make the USB devices in `all'.
1998-07-12 20:28:24 +00:00
deb00272b9
Add USB support. Supported so far:
...
* UHCI and OHCI host controllers on PCI
* Hubs
* HID devices withe special drivers for mouse and keyboard
* Printers
1998-07-12 19:51:55 +00:00
75f8e74b32
These commits do two things:
...
1. Provide a consistent and extensible framework for compiling
kernels for the "make snapshot" target.
2. Add OBJDIR support for the "make snapshot" target, in the form
of three new make variables: KERNOBJDIR, KERNSRCDIR, and KERNCONFDIR.
Default values are in the Makefile.inc, and for OBJDIR they should
be defined in /etc/mk.conf as
KERNSRCDIR=${BSDSRCDIR}/sys
KERNOBJDIR=${BSDOBJDIR}/sys/arch/${MACHINE}/compile
The next step is to make a new target in the src/etc/Makefile for "release"
(or something like that) to make release(7) format files.
1998-06-28 09:38:40 +00:00
d099dd6212
change wscons tty names to ttyE* to avoid clashes with the pty namespace
1998-06-18 15:02:34 +00:00
edcf4a0ca1
add nwscons tty nodes
1998-06-12 15:39:35 +00:00
573bdc9331
Introduce a couple of variables to make this clearer.
1998-03-22 02:26:48 +00:00
352ec2fb25
Create dty (dialout) device nodes for the com driver.
1998-03-22 01:15:00 +00:00
9a6d991cf2
Make some more disk devices; people may have more than 2 wd disks
...
or 4 sd disks these days.
1997-12-15 01:05:01 +00:00
60ac257eb3
Fixes PR #3858 : /dev/fd uniformly updated in MAKEDEV to make directory
...
(and file nodes) owned by root.wheel, and /dev/fd directory mode 755. Now
it matches mtree (and the rest of the system's permissions/owner layout).
1997-11-26 03:09:23 +00:00
ffa1ced6be
add appropriate entry to make "random" as documented in rnd(4).
...
add "random" entry to "all".
1997-11-20 05:57:38 +00:00
5629b8d007
* st* and wt* have perms 660 instead of 640
...
* add enss* to ss*
* invoke MAKEDEV.local as $0.local
* reset umask to 077 after running MAKEDEV.local
* warn on unknown devices
1997-08-22 11:19:43 +00:00
912c4ee11f
Create /dev/audioctl and allow creation of multiple audio devices.
1997-08-18 21:23:12 +00:00
e77a6f04d3
Finally finish fixing pr-230 by assigning minor+8 and minor+16 device
...
names for the lower density minor dev numbers. My shell code would
even work for a wt1 device, but I would seriously pity anyone trying
to get two of these things to work on one machine. Heck, no one should
even try to use ONE wt device.
1997-08-04 03:50:26 +00:00
07a71fdfd0
Make MAKEDEV and MAKEDEV.local mutually consistant. Reported in
...
pr #2596 by Tatoku Ogaito, but my fix is different from his.
This is purely an aesthetic change.
1997-07-31 04:08:15 +00:00
851aef5327
Add ta=4.2BSD to both floppy3 and floppy5 entries. (If you are
...
disklabeling your floppy, you are most likely putting on a 4.2BSD
file system. This is in support of the distrib/i386/floppies
building via vnds.)
1997-07-29 18:46:06 +00:00
ffde90f14b
Make all tty??/pty?? pairs that can be opened by openpty().
...
Remove use of awk for generating names.
Make all consistent as possible.
Closes PR 3420.
1997-07-23 01:29:36 +00:00
840d172649
Make all MAKEDEVs make fd/* similar. No need for awk or expr.
...
Inspired by PR 3420. Some MAKEDEVS had the fd separated out
of std and fd added to std.
1997-07-22 23:13:05 +00:00
91e0832cae
Satellite receiver driver for ISA cards from PlanetConnect by Jason and
...
Herb for Canada Connect Corp.
1997-07-13 19:16:59 +00:00
a902cc2ba7
Added a new device entry for ipfilter: /dev/ipauth
1997-07-07 22:26:51 +00:00
0bea2a15f6
Note that you now must have swap entries to satisfy swapctl(8)
1997-06-16 00:58:49 +00:00
7f29bb4668
Add ipnat and ipstate at the appropriate minor numbers off the ipfilter
...
device.
1997-05-31 23:52:55 +00:00
6f6e264129
Use a shell loop to build fd/*, rather than an awk script.
1997-03-31 21:28:24 +00:00
736a7ada1e
Unroll the pty creation loop.
1997-03-31 21:23:34 +00:00
d015ce73e5
GENERIC{AHA,OTHER} have been merged into GENERIC; fixes PR port-i386/3274.
1997-03-04 06:30:01 +00:00
2fadfb1a2f
add 'ipl' device node entry, for ip-filter.
1997-01-07 08:04:19 +00:00
4bb3612c55
Device rename: `rd' => `md'
1997-01-01 23:46:17 +00:00
18a4f7f093
change rd* target to produce rd?[abc] and rrd?[abc] devices.
...
add "ramdisk" target which is basically floppy + rd0, needed for
new install system.
1996-10-21 19:58:25 +00:00
d98e97aa8a
New and improved fstab samples, now with examples of procfs, kernfs
...
and cd9660 file systems, an mfs mounted /tmp, an example swap
partition, correct fsck scheduling, and even comments pointing users
at man pages for more information. I'm still not sure we need these
sample files at all, but at least they are now useful to the new user.
1996-10-16 15:20:12 +00:00
c1436aa832
restore snap_md target (sigh...)
1996-10-16 02:25:08 +00:00
187216b4e6
removed obsolete garbage associated with obsolete snapshot
...
functionality. Snapshots are built with tools in src/distrib
1996-10-15 17:45:31 +00:00
7739c57905
Remove obsolete snapshot functionality (which is now in
...
/usr/src/distrib) -- Makefile.inc is now a no-op. I chose not to
remove it completely because port specific stuff might show up someday.
1996-10-15 17:43:57 +00:00
b1dfe12b2f
Remove very obsolete kernel copy floppy construction tools -- these
...
are all now in /usr/src/distrib/i386
1996-10-15 17:30:58 +00:00
725b03db3a
RCS ID police
1996-10-15 03:42:50 +00:00
21784a56b6
Correct char device major number for `rd'.
1996-09-08 03:33:55 +00:00
69b13f156d
Document `ch'.
1996-09-08 03:16:28 +00:00
838bd1a7ae
Add `ss' and `uk'. Sync `all'. General cleanup. (No more expr!)
1996-09-08 03:12:23 +00:00
b86b695240
add Advanced Power Management driver
...
Includes bootstrap support from FreeBSD (Tatsumi HOSOKAWA and <ukai>)
1996-08-25 23:38:57 +00:00
103e63b59a
Fix the snap_md target to use the correct kernel names; GENERICAHA and
...
GENERICBT were replaced with GENERICADP and GENERICOTHER some time ago.
XXX The kc_* targets here are still broken, but aren't currently used
XXX anyhow. This change allows one to at least do a "make snapshot".
1996-04-23 17:39:39 +00:00
1044d1ac8a
forgot about joy1
1996-03-31 00:50:47 +00:00
0dcdd69b42
Added joystick support (from Matthieu Herrb); also RCS/CVS ID police.
1996-03-31 00:04:06 +00:00
82b57c7135
Collapse some cases together.
1995-12-08 06:55:38 +00:00
cc119bf4a3
Allow more than one wt, and fix up permissions. Unclutter st.
1995-12-08 06:44:07 +00:00
eeba73b02d
Add no rewind device nodes for the wt driver
1995-12-07 11:04:37 +00:00
4086abf6dd
ufs -> ffs; PR #1381
1995-08-22 19:52:25 +00:00
7b8694c512
Add entries for the ccd.
1995-08-17 18:02:27 +00:00
cdff76dff7
etc/etc.i386/MAKEDEV create mixer device. PR# port-i386/1208.
1995-07-19 19:55:27 +00:00
81447b8322
Use "${BINOWN}" and "${BINGRP}" instead of "bin"
1995-06-26 22:17:38 +00:00
7f03929ef8
add tun to all
1994-12-26 21:41:53 +00:00
6be039584f
Remove silly unit number limitations on several items.
1994-09-19 02:18:05 +00:00
3f372179d4
Change vga to ttyv0, with a symlink for X.
1994-07-31 08:44:31 +00:00
f1145c19b4
now using sh builtin 'echo'... so kill 'echo' entry in FLOPPYBINS
1994-07-18 06:37:20 +00:00
497a6cedf0
Fix minor numbers for pms.
1994-07-17 19:08:16 +00:00
06588a9270
Fix typo.
1994-06-18 00:41:20 +00:00
tv