capability, using D3 and D0 power states. This saves me quite a bit
of battery when not using the built-in Ethernet on my IBM T-20 during
long IETF meetings.
false informations on a loaded ethernet segement.
- convert to bus_dma(9) (better late than never :)
- add proper le32toh/htole32 so that it works on big-endian system (tested
on macppc).
Close PR kern/10327.
My WDC MDMA-only (non-UDMA) drives did not work on the Acard controllers,
but it turns out that the problem was not Acard specific.
These WDC drives do not work on the ESS ISAPnP wdc port nor on
macppc obio wdc port neither, and another Quantum MDMA-only drive
works fine on the Acard.
These WDC drives work fine on my i386 pciide (which is initialized
by the BIOS), so maybe we have to do something in MI wdc to initialize
such drives properly...
Ultra/100 for revs >= 0xC4.
The the generic PCIIDE interupt routine for chipsets rev >= 0xC2 in native
mode, it seems that newer chipsets don't have the ACER_CHIDS register :(
From Linux and FreeBSD.
with some differences to the original patch: don't assume all controllers with
rev >= HPT370_REV are HPT370, and explicitely print if we have a chip with a
rev the driver does't know.
calls lcp.{Up,Down} by itself, and (2) as lmc driver uses interrupt to
get the card initialization callback lcp calls from sppp_ioctl
does not really work. for chdlc pp_{up,down} are not really necessary so
don't bother (#if 0'ed).
we can run LCP and subsequent PPP negotiation.
- suppress too noisy printf() for about AIS event (if you remove the cable,
it will bark forever).
- sppp_dequeue() can return NULL even when sppp_isempty() is false, so check
it and do not deref NULL pointer.
- sppp_flush() on LMC interface shutdown.
- prepare to change BPF type on the fly (bpf_change_type).
the kernel to panic since it is recognised as a TGA and the TGA driver
doesn't [yet] know what to do with it.
This patch fixes that by:
o making tgamatch() try to actually figure out what kind
of TGA card is there, rather than simply relying on the
vendor/product ids.
o creating a tga_cnmatch() so that the console code in
arch/alpha/pci/pci_machdep.c can cause the same to occur.
o breaking up some of tga_getdevconfig() into a few different
functions to re-use code that would have been duplicated.
o changed arch/alpha/pci/pci_machdep.c so that it calls out
to tga_cnmatch() if DEVICE_IS_TGA() matches before it decides
to attach the console as a TGA.
Addresses PR: port-alpha/12923
cjs