Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
118,727 Commits 606 Branches 0 Tags 3.1 GiB
ef743c64b6
Commit Graph

285 Commits

Author SHA1 Message Date
tron
9340e9d695 Fix build problem caused by integration of new I2C framework. 2003-09-30 09:35:15 +00:00
briggs
7f9445d14a It is best to allow a little time for the reset to settle in before 
we start polling the BMCR again.  Greg Woods noted on tech-net@
that the DP83840A manual states that there should be a 500us delay
between asserting software reset and attempting MII serial operations.

I've also noted that a DP83815 can get into a bad state on cable
removal and reinsertion if we do not delay here.

This may well address PR/16346, and I seem to recall occasional
reports of auto-negotiation and flaky kinds of errors that this
might also alleviate.
 2003-09-10 05:25:22 +00:00
tsutsui
4189ddf652 Remove advertising clauses from code written by Shingo WATANABE. 
He has kindly consented it.
 2003-09-04 15:17:38 +00:00
hannken
b32066575d Regen. 2003-07-17 12:40:56 +00:00
hannken
7b247f3812 Add support for the BCM5705: 
- Only BCM5705M asic rev A1 was tested.

Thanks to Bill Paul (wpaul@freebsd.org) for help and support.

Approved by: Frank van der Linden <fvdl@netbsd.org>
 2003-07-17 11:44:26 +00:00
msaitoh
74b3acef2e - last commit (rev. 1.36) add a entry to keep model number of the PHY in 
mii_softc. There are some situations to want to check model number.
- add comment
 2003-07-01 22:58:48 +00:00
msaitoh
d8a4a08a24 - last commit (rev. 1.32) fixes icsphy_reset()'s problem. ICSphys don't 
restart auto negotiation, so it kick.
- add comment in icsphy_reset()
 2003-07-01 22:51:13 +00:00
msaitoh
5af1b6934b Add ICS1889 and 1892 2003-07-01 22:46:08 +00:00
martin
b464a5b71f Only read media status bits when they are valid. 
From Makoto Fujiwara in PR kern/21810.
 2003-06-06 23:22:56 +00:00
scw
37a9b25563 Match Broadcom's BCM5214 Quad 10/100 media interface. 2003-05-02 19:42:35 +00:00
scw
4c6f8bfaa7 Regen 2003-05-02 19:39:47 +00:00
scw
5f24295efa Add entry for Broadcom's BCM5214 Quad 10/100 media interface. 2003-05-02 19:39:29 +00:00
thorpej
c31f87a5cb Use aprint*(). 2003-04-29 01:49:33 +00:00
kristerw
b8943cbf89 Save some text segment space by not defining URLPHY_DEBUG. 2003-04-04 22:21:39 +00:00
drochner
ba0f309a91 Before checking the (Intel specific) SCR_T4 register, make 
sure the chip implements 100T4 (in BMSR).
The 82562 (which doesn't implement 100T4) has the SCR_T4 bit
(always?) set, which led to wrong media status reports.
approved by thorpej
 2003-03-27 19:36:49 +00:00
matt
52f7db1beb Fix C&P tpyo. 2003-03-07 00:14:38 +00:00
matt
c4d8a6226e Make the intel phy match the i82562 phys. 2003-03-06 22:38:09 +00:00
matt
4630a8e7f3 Add a MIIF_FORCEANEG flag to be passed to mii_attach. This forces an 
autonegotiation to take place if IFM_AUTO is selected in mii_media_set.
Make the gem driver use it.  (XXX hme probably should use it but I can't
test that).
 2003-02-20 00:55:21 +00:00
matt
ee04df9a4d Add support for Am79C87[45]. 2003-01-26 06:25:08 +00:00
matt
5ade701481 Regen. 2003-01-26 06:21:03 +00:00
matt
b9f79bf02f Add AMD Am79C87[45] (which use the Altima OUI). 2003-01-26 06:20:30 +00:00
gendalia
1f71c142cd Add altima (broadcom) AC101L, phy for 3com 3c905cx-tx on nForce2 MCP-T 2003-01-17 06:23:52 +00:00
gendalia
6672d83048 regenerate to match miidevs, added ac101L phy 2003-01-17 06:21:13 +00:00
gendalia
3f50762f0c Add altima (broadcom) AC101L, phy for 3com 3c905cx-tx on nForce2 MCP-T. 2003-01-17 06:20:07 +00:00
jonathan
1556fd569d Update first 16-bit word of 5401 DSP patch to match latest Linux drivers. 
Add comment  saying what the magic values do: disable tap power management.
 2003-01-16 20:02:05 +00:00
jonathan
0ecaf20a9d regen machine-generated files from miidevs rev 1.44 (bcm5704 phy) 2003-01-16 18:46:08 +00:00
jonathan
4b1bc17628 Add PHY entry for bcm5704c (copper) integral phy to miidevs. 
Add 5704 phy and dsp patch, and untestsed dsp patch for 5703, to brgphy.c.
 2003-01-16 18:43:40 +00:00
thorpej
72a7af27b0 Use aprint_normal() in cfprint routines. 2003-01-01 00:10:15 +00:00
matt
78b64fd232 Recognize BCM5703 phy. (with this and the bge changes, the bge0 on my 
ASUS P4PE m/b is now working)
 2002-12-27 03:15:52 +00:00
matt
9d04e25e82 Regen. 2002-12-27 03:14:23 +00:00
matt
2860168d98 Add BCM5703. 2002-12-27 03:14:06 +00:00
martin
e750674637 Regen (MYSON MTD803 added) 2002-11-07 20:37:03 +00:00
martin
d407db9cfd Add MYSON MTD803 2002-11-07 20:35:55 +00:00
thorpej
d52f5f8ecb Make mii_media_active unsigned. 2002-11-07 07:45:03 +00:00
thorpej
499a491929 Fix signed/unsigned comparison warnings. 2002-11-07 07:41:22 +00:00
perry
43ed640ca5 fix lint warnings about things being stringified under cpp -traditional 2002-10-23 01:50:11 +00:00
fair
03f1a009cb If pnaphy attaches, make sure the mii_flags has MIIF_IS_HPNA in it. 2002-10-13 06:28:01 +00:00
thorpej
c9b3657ce9 Add trailing ; to CFATTACH_DECL. 2002-10-02 16:33:28 +00:00
thorpej
71adb76f75 Use CFATTACH_DECL(). 2002-09-30 21:57:46 +00:00
wiz
b1c7ac0e6d "definitions" has lots of 'i's, but that's not reason to leave one out. 2002-09-29 23:23:56 +00:00
thorpej
0720e04052 Remove a debugging printf. 2002-09-28 19:07:43 +00:00
scw
cbc5db835b Try a little harder to work around the "Isolated After Reset" lossage. 2002-09-28 10:27:21 +00:00
thorpej
f818766afe Declare all cfattach structures const. 2002-09-27 20:31:45 +00:00
provos
0f09ed48a5 remove trailing \n in panic(). approved perry. 2002-09-27 15:35:29 +00:00
thorpej
6c88de3b53 Introduce a new routine, config_match(), which invokes the 
cfattach->ca_match function in behalf of the caller.  Use it
rather than invoking cfattach->ca_match directly.
 2002-09-27 03:17:40 +00:00
thorpej
d1ad2ac4f2 Rather than referencing the cfdriver directly in the cfdata entries, 
instead use a string naming the driver.  The cfdriver is then looked
up in a list which is built at run-time.
 2002-09-27 02:24:06 +00:00
scw
ce2ec9e63e Add support for the SMsC LAN83C183 PHY, which actually probes as a 
Seeq 84220.

Also add an 84220-specific work-around for some braindamage (at least
in the PHY I'm working with) where the PHY always comes out of reset
isolated, regardless of the previous state of the BMCR_ISO bit. This
happens even if the PHY has address zero, which is contrary to the
part's datasheet...

The work-around is only applied if we notice BMCR_ISO is set when it
should be clear following reset. The fix is to wait 30mS and clear
it manually. (The change doesn't stick if it's cleared sooner than this)
 2002-08-26 11:13:13 +00:00
fvdl
660edcbaff Match 881011 PHY. 2002-08-08 00:04:57 +00:00
fvdl
86710d1b0a Regen after addition of marvell 881011. 2002-08-08 00:04:28 +00:00
fvdl
b068d9297a Add ID for Marvell 881011 phy found on newer i8254x-based gig-e cards. 2002-08-08 00:03:42 +00:00