Commit Graph

561 Commits

Author SHA1 Message Date
tsubai 2fb7179aaf Add KERNEL_LOCK (et al.) to run MULTIPROCESSOR kernel on a single cpu system. 2000-11-25 15:49:43 +00:00
chs c62d17a551 rationalize the use of b_flags for geteblk() buffers.
rather than assigning to the whole field, set or clear individual flags,
which implies that the B_BUSY and B_INVAL flags will remain set.
this allows us to make the assertion in brelse() that B_BUSY is set,
which is the purpose of all this.
2000-11-20 08:24:08 +00:00
matt 9dd26cf7c4 It's hfs.c, not hfs. Add -I${.CURDIR} for objdirs. XXX hfs.c should
be integrated into libsa.
2000-11-16 07:36:04 +00:00
thorpej d96bb89daf Use <powerpc/powerpc/trap_subr.S> 2000-11-16 05:34:03 +00:00
thorpej b84f740be0 Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach(). 2000-11-15 01:02:11 +00:00
matt dbe8de94a8 back out my change powerpc/conf/files.ofw. Enable the inclusion of
dev/ofw/files.ofw on macppc.  Add openfirm to ofppc/conf.c
2000-11-15 00:39:31 +00:00
matt 8ba706bdfd Add rnd & openfirm to POWERMAC
Add openfirm and commmented-out firewire stuff to GENERIC
2000-11-14 22:33:24 +00:00
matt ca735c9a04 Add initial support dual-CPU G4. At least finds 2nd CPU. 2000-11-14 21:55:25 +00:00
matt 6e88c0d0d6 Add a openfirm entry to conf.c 2000-11-14 21:46:09 +00:00
augustss eb9736c09a Add uscanner. 2000-11-14 19:52:04 +00:00
tsubai e3ae93dfd4 Add hfs support. Currently this layer simply throw the request to the OF
(and the OF recognizes HFS).
2000-11-14 11:25:34 +00:00
hannken 0ba0592864 Pull in dev/i2o/files.i2o. 2000-11-10 17:09:15 +00:00
tsubai eef7148644 Enable HID0_BTIC on 750 and 7400. 2000-11-09 11:58:09 +00:00
tsubai a88f368787 defopt L2CR_CONFIG. 2000-11-08 17:53:46 +00:00
wrstuden 10c4684193 Use wdc_print_modes() so that we get to see what DMA modes
are used with a drive.
2000-11-08 17:50:44 +00:00
matt 4feeea4377 Reduce maxusers to 12 (this is a single user kernel after all).
Remove COMPAT_13 since it's not needed.
2000-11-07 17:37:07 +00:00
matt c62b76ce87 Switch from the old yucky ncr to the new good siop driver for 53c8xx. 2000-11-07 17:01:33 +00:00
tsubai 532d1c33c2 Enter ddb after ddb_init() if -d is specified. 2000-11-06 12:35:21 +00:00
tsubai 7bfead48b0 Rearrange console selection code.
Now usb keyboard is preferred to adb.
2000-11-06 12:33:07 +00:00
matt 5a55a6ac60 Add files.ieee1394 2000-11-05 23:19:41 +00:00
wrstuden 029bdd3185 Adjust to change in tty line discipline handling. 2000-11-03 18:50:49 +00:00
tsubai 3d213115f4 Don't match if nintr > 12 (more than 3 cells). 2000-11-03 12:26:06 +00:00
tsubai bcb05a2f55 Get 6 interrupt cells from OF. 2000-11-03 12:20:55 +00:00
tsubai 2fe4478f19 Don't assume 12x22 font. 2000-11-02 14:25:51 +00:00
eeh 8c3f6a0d10 Adapt to new line discipline scheme. 2000-11-02 00:37:56 +00:00
tsubai 08e43d95ca Don't set M_HASFCS flag twice. 2000-11-01 20:21:58 +00:00
mycroft 204e210aef Enable DDB history by default. 2000-11-01 06:57:56 +00:00
mycroft 94abfa5119 Actually attach the audio device... 2000-11-01 05:28:09 +00:00
mycroft e964414bc8 (Oops. There's no other audio support in this config.) 2000-11-01 04:34:41 +00:00
mycroft 105e2e4e4d Add awacs. 2000-11-01 04:31:20 +00:00
tsubai b4b571ccb9 Match "chrp,mesh0". 2000-10-31 16:57:07 +00:00
tsutsui 51d748392f Switch to sys/dev/md_root.c. Tested on an INSTALL kernel. 2000-10-29 01:39:19 +00:00
tsubai 784da8d158 Use "doze" power-saving mode on 750 and 7400. 2000-10-28 21:57:43 +00:00
garbled b7c07855f6 make -> ${MAKE} 2000-10-28 15:41:25 +00:00
tsubai 251bc81879 Change ofwboot entry address to 0x600000. 2000-10-24 12:18:33 +00:00
tsubai 756f954ef1 Fix Conner CFP1080 problem (pr 7612) and add debugging messages. 2000-10-23 21:04:27 +00:00
matt b30ca78c9b Packets have the FCS append so set M_HASFCS. 2000-10-18 05:43:13 +00:00
tsubai 03251ccf07 Pass correct packet length to the upper layer. 2000-10-17 15:57:51 +00:00
tsubai 5d6a22ffea Use VNODE_OP_NOINLINE. 2000-10-14 19:14:06 +00:00
wrstuden 07a9408ae6 Move ofwboot to 600000 hex. Should make loading better (less likely to
run into OF internals).
2000-10-13 00:19:30 +00:00
abs 2824f4906d Ensure all INSTALL* kernels have two ptys, and a note explaining why:
pseudo-device  pty             2       # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.
2000-10-02 18:43:34 +00:00
thorpej 7ca3fb9ef0 Move the check for "promisc + unicast + not for us" into ether_input(),
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00
tsubai 442b9b5df2 Get the correct OF node of the screen because PowerBooks have two screens
in one PCI device.
2000-10-01 19:08:30 +00:00
tsutsui cdb3d9df80 Add sip* at pci. 2000-09-29 14:45:59 +00:00
tsubai e256cfb9ec Fix a bug that prevents the kernel from detecting the root device. 2000-09-29 10:14:20 +00:00
abs 3ef92f0bdb Use "options<SPACE><TAB>" not "options<TAB>" - noted by simonb.
Move VNODE_OP_NOINLINE and NFS_V2_ONLY into '# Filesystem options' section.
Consistently label '# Filesystem options' and '#File systems' sections.
2000-09-25 13:54:50 +00:00
abs ccf1c822a6 Ensure all INSTALL config files have (at least) COPTS="-Os", cincluding bebox
based on it working already for macppc.
Also add commented out:
#options        VNODE_OP_NOINLINE       # Don't inline vnode op calls
#options        NFS_V2_ONLY             # Exclude NFS3 and NQNFS code
as suggestions for additional savings
2000-09-25 11:46:37 +00:00
tsubai 5836de14e4 Fix a bug introduced in BOOT_FLAG change. 2000-09-24 16:16:37 +00:00
jdolecek b1f94e26ab don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant
2000-09-24 15:59:26 +00:00
jdolecek 49c105ffdb add new macro BOOT_FLAG() (defined in <sys/boot_flag.h>) - this
maps standard boot flags to corresponding RB_* values
use BOOT_FLAG() in port's MD code as appropriate

as discussed on tech-kern, add new boot flags -v, -q for booting
verbosely or quietly, and corresponding AB_VERBOSE/AB_QUIET
boot flags; also add FreeBSD-compatible bootverbose macro and
NetBSD-specific bootquiet macro

for hpcmips, use new bootverbose instead of it's own hpcmips_verbose

Tested on i386, and to limited extend (compile of affected files) also for
mvme68k, hp300, luna68k, sun3.
2000-09-24 12:32:31 +00:00