fvdl
eaee8c445a
Set the error code sanely in a few cases.
...
When connecting to a version 2 portmapper, don't use the "udp" nettype,
since that includes udp on ipv6, but just use the "udp" netconfig entry
directly.
2000-06-07 21:46:01 +00:00
thorpej
5dd5a4e083
Remove restore(8). It doens't belong on install media, and if we
...
want to provide that functionality, we can do it some other way.
2000-06-07 21:13:12 +00:00
thorpej
9e01451f4c
test is a shell built-in; don't need a separate binary.
2000-06-07 21:00:03 +00:00
thorpej
2304ada2b0
Need /etc/netconfig.
2000-06-07 20:43:11 +00:00
scw
295ed77595
The OPTi controller supports a 32-bit dataport after all.
...
Also detect when the chip is sitting on a 25MHz PCIbus and
set the timing registers accordingly.
2000-06-07 20:42:52 +00:00
thorpej
765e8772d7
Need /etc/netconfig.
2000-06-07 20:42:19 +00:00
thorpej
ceff2dc6bc
Need /etc/netconfig.
2000-06-07 20:32:06 +00:00
matt
8e734e6188
Make the release notes, etc.
2000-06-07 20:29:00 +00:00
thorpej
b871a87cc8
Need /etc/netconfig.
2000-06-07 20:23:19 +00:00
matt
a83202e259
Add netconfig
2000-06-07 20:08:12 +00:00
thorpej
464b4e3de0
Need /etc/netconfig.
2000-06-07 19:54:50 +00:00
ad
887d4555cd
Regen.
2000-06-07 19:53:17 +00:00
ad
4837200a8c
Add vendor/device ID for 3ware Escalade IDE RAID controller.
2000-06-07 19:52:07 +00:00
nathanw
44145e574e
Fix incorrect uses of indicate/indicates/indicated for each other.
2000-06-07 19:47:57 +00:00
thorpej
eef8b653bc
Need /etc/netconfig.
2000-06-07 19:42:23 +00:00
thorpej
afb5621bab
Add another `cylinder' to the ramdisk.
2000-06-07 19:41:47 +00:00
matt
a0cdedfb34
add netconfig
2000-06-07 19:38:00 +00:00
matt
2dde4ce0c9
Slight stylistic changes. Add KAME checksum routine.
2000-06-07 19:31:33 +00:00
thorpej
733a6e059b
Increase the miniroot size to 3072 (to match INSTALL and INSTALL_TINY).
...
This is needed due to TI-RPC being larger.
2000-06-07 19:29:45 +00:00
thorpej
c57ef7446d
check_pager() was using an uninitialized variable; fix it.
2000-06-07 18:52:31 +00:00
fvdl
737db7ee0a
The two unchanged interfaces (svc_create and clnt_create) resulted
...
in sockets bound to reserved ports in the old code. Since old binaries
will still expect this, always try to bind to a reserved port in
clnt_cli_create and svc_tli_create, unless we're already bound.
2000-06-07 18:27:39 +00:00
tsubai
4c15219d3b
* Access hardware directly in zscn* instead of calling OF.
...
* Clean up.
2000-06-07 17:37:07 +00:00
matt
84ad7d0a8d
More lossage. You need to make the directory each catalog will go into.
2000-06-07 17:28:52 +00:00
thorpej
0b01d83083
Revert rev. 1.30.
2000-06-07 16:37:24 +00:00
matt
ce4415cde0
Don't know if this is a side effect of the recent makes changes but
...
set FILESDIR_${F} for info files.
2000-06-07 16:29:11 +00:00
tron
f92ae923f9
Make "src/regress/sys/kern/extent" build again.
2000-06-07 16:25:15 +00:00
tsutsui
3f94f56142
Adapt struct scsipi_adapter changes.
2000-06-07 14:40:20 +00:00
bouyer
227ed98327
Implement file locking in lockd. All the stuff is done in userland, using
...
fhopen() and flock(). This means that if you kill lockd, all locks will
be relased (but you're supposed to kill statd at the same time, so
remote hosts will know it and re-establish the lock).
Tested against solaris 2.7 and linux 2.2.14 clients.
Shared lock are not handled efficiently, they're serialised in lockd when they
could be granted.
2000-06-07 14:34:40 +00:00
bouyer
1116e111be
- remove NLM4_NULL proc, rpcgen will do one for us (which works better :)
...
- add a procedure NLM_SM_NOTIFY (in version 0), used by statd to send
notifications to lockd.
2000-06-07 14:30:15 +00:00
leo
30bae800ae
Mark 'n' explicitely as output of the 'mulul' instruction.
2000-06-07 14:26:11 +00:00
jwise
7e7d991f01
Remove one of mine that really wasn't very good, and add:
...
NetBSD: abandon all hype, oh ye who enter here.
2000-06-07 14:04:45 +00:00
lukem
d70c2ff830
fix the function prototypes in the generated header file (the second
...
arg should have been a pointer); without this you'd get a complaint
about a mismatch between the prototype in the header file and the
function declaration in foo_xdr.c.
fix by Vltteri Vuorikoski@datafellows.com <altteri.Vuorikoski@datafellows.com>
in [bin/6788], with some cosmetic mods by me.
2000-06-07 13:53:07 +00:00
thorpej
85063167c9
Correct SIMPLELOCK_INITIALIZER for the LOCKDEBUG case.
2000-06-07 13:50:40 +00:00
simonb
d649f5ebb1
Spell registerrpc properly.
2000-06-07 13:39:43 +00:00
tsutsui
b3a25bd8a5
Config root on md0a, not md0.
2000-06-07 13:26:25 +00:00
jhawk
84ceb5dfe7
Fix long-standing inconsistency between manapage and code.
...
The "ditto" character is " (double-quote); not , (comma) as
indicated in the manpage; and not ' (single-quote) as indicated
in the man.old -style manpage from which the mdoc manpage was derived.
Some other versions of ddb use single-quote for this feature, and this
part of the code may change again in the near future, but the documentation
now affects reality now.
they
2000-06-07 13:24:11 +00:00
simonb
b267c1fb26
If there is no "set column" capability, don't try to use the "cursor
...
set" capability - just use the last-resort of using spaces. Fixes the
``problem'' where "tset -Q" would move the cursor to the 24th line of an
xterm irrespective of where the cursor was before tset was run.
2000-06-07 13:21:43 +00:00
simonb
d06abde2e6
Set "lines" and "columns" if ioctl(TIOCGWINSZ) returns something useful.
2000-06-07 13:18:36 +00:00
tsutsui
c49a328d6f
Turn off xserver and xfonts sets on default.
2000-06-07 13:07:41 +00:00
tsubai
5afb55f9cd
child_return() should take void *arg.
2000-06-07 11:34:17 +00:00
tsubai
bebb7b9aee
Remove child_return prototype; it is now in sys/proc.h.
2000-06-07 11:23:17 +00:00
nisimura
4250cdde36
- Take care of dm_segs[].dm_len value whenever the offset is adjusted.
...
Known not working well for 4MAX+ this moment.
- White spacing.
2000-06-07 10:09:19 +00:00
mrg
a67130a218
regen.
2000-06-07 09:55:22 +00:00
mrg
09b843b7f6
fix a couple of the sun entries.
2000-06-07 09:52:16 +00:00
pk
9a8d03d6bd
Add a couple of missing semi-colons.
2000-06-07 09:16:41 +00:00
haya
dca97557cd
Add CB_BCR_RESET_ENABLE in bridge control resister's bit definition.
2000-06-07 09:02:46 +00:00
itojun
8fe589a2ae
fix anycast address determination.
...
correct interface address addition when link-local is added (check if ifp
matches).
make diff to kame repository easier (breaks some KNF)
sync with kame.
2000-06-07 06:27:43 +00:00
msaitoh
61d02add45
remove extra NOPs because "bf" and "bt" instruction have no delayed slot.
2000-06-07 05:28:17 +00:00
matt
d3649351f1
Add support for machdep.console_device, machdep.booted_device,
...
and machdep.booted_kernel sysctl variables on arm32. (booted_kernel
only currently available on Sharks)
2000-06-07 04:59:28 +00:00
simonb
a98dd470c6
Calculate field widths on the fly so that all columns line up nicely
...
and make more effective use of screen real estate when some columns
(eg USER and VSZ) didn't need the full default width.
2000-06-07 04:57:59 +00:00