526aa19c52
Rewrite types(5) as per perry@'s suggestion from few years back ("XXX this
...
document is rather musty. It needs a general update."). Also move it to the
right section from section 5. Ok wiz@.
To minimize maintenance costs, the content is mostly jargon around The
Standard. Only few NetBSD-specific types are mentioned as an example.
2010-04-22 06:48:28 +00:00
71e904f60f
Document __STRING(x) and __CONCAT(x, y) from <sys/cdefs.h>.
2010-04-21 18:04:38 +00:00
4c1500491b
bend over
2010-04-21 11:11:32 +00:00
a08b65f1f7
Oops - last change could lead to crashes - when not asking for a geometry,
...
use the default one.
2010-04-19 21:12:51 +00:00
0748c0df89
Do not ask for a "bios geometry" if we can not match the device to a bios
...
known device - it's most certainly a don't care.
2010-04-19 20:35:23 +00:00
a00365f163
Fix a varargs argument type mismatch on 32bit archs - change format to
...
explicitly use %lu and cast the passed value accordingly.
2010-04-19 19:22:41 +00:00
2a48105b23
Tune a message
2010-04-19 19:16:11 +00:00
84459e4292
Use the same multiuser mode setup as the sparc64 install CD.
...
Add a few usefull binaries.
2010-04-19 04:41:36 +00:00
dd15332205
Ooops, do not try to create a symlink in a not-yet existing directory
2010-04-18 16:10:03 +00:00
07b122db7c
Change the install CD to go to full multiuser mode. This clearly
...
separates the setup done by /etc/rc once, and the repeated stuff
(install.sh invoking sysinst).
2010-04-18 12:58:57 +00:00
146d1a0f02
add the iwl6000 microcode.
2010-04-17 15:55:52 +00:00
b62fc9e203
Added Sharp W-ZERO3 series support.
2010-04-17 13:36:21 +00:00
9cd65b11c5
Add a link, bus_space_is_equal.9 -> bus_space.9.
2010-04-16 20:08:51 +00:00
aecc40bf7d
new if_iwn firmware.
2010-04-16 01:45:33 +00:00
7824e94c72
The 16bit "bootmenu valid" magic is slightly week, collisions have been
...
seen in the wild. So, before accepting arbitrary strings from there,
validate at least slightly and ignore if the entries are not properly
0 terminated or contain controll characters.
2010-04-15 22:55:15 +00:00
719e45f7e2
cpu_swapout(9) is no more.
2010-04-13 17:34:18 +00:00
763451d1ab
Sort.
2010-04-13 17:08:45 +00:00
9e8e2a3402
Hook rb(3) to the build.
2010-04-13 10:46:10 +00:00
994e33429b
Build & install msdosfs snapshot test and deal with the happy happy
...
joy joy setlistdist etcetc. stuff.
2010-04-13 10:27:52 +00:00
c23d982d62
Document the ctod-family of macros from <sys/param.h>.
...
XXX: Someone may want to check if there is anything to add or correct.
2010-04-13 08:40:19 +00:00
e0fa2da951
As the cited setroot(9) was nonexistent, briefly document it here.
2010-04-13 07:32:31 +00:00
daf86c0ae0
Briefly note also curlwp.
2010-04-13 05:40:12 +00:00
d32fe754d7
snapshot test -> setlists
2010-04-12 22:59:49 +00:00
db46f70b96
As long as humans have to edit these lists, use non-braindead sorting.
2010-04-12 22:38:36 +00:00
88938aaccd
add rumpdev_fss to setlists
2010-04-12 22:34:17 +00:00
3fc7b0347a
Add pf to the module set list.
2010-04-12 14:12:43 +00:00
344e2f2f16
Following nullfs, rename rumpfs_umapfs to rumpfs_umap to make the
...
basename the same as the kernel module (this too was in-tree only
for a little over a week with the old name).
2010-04-11 05:45:57 +00:00
c9128dfbfd
Install 'symbol' from font-adobe-(75|100)dpi.
...
Should fix some symbols in xcalc.
To do: transform these and other currently-installed-only-as-bdf fonts
to pcf.gz.
2010-04-11 02:41:38 +00:00
b764352d60
Rename librumpfs_nullfs to librumpfs_null to make the basename the
...
same as with the kernel module (and hence MOUNT_NULL).
I added the old name to the obsolete list, but given that it was
in-tree for only a bit over a week, I'll remove the entries in a
few weeks.
2010-04-10 21:32:59 +00:00
eb4243508b
i386/vald: gone but not forgotten
2010-04-10 20:52:14 +00:00
039f34b662
Move vald(4) to sys/dev/acpi. This is MI and should work also on amd64.
...
ok jmcneill@
XXX: This is broken: it calls methods with absolute pathnames (almost
guaranteed not to be portable across models), it accesses methods
that are in the domain of other drivers, it walks the namespace on
its own, it contains plenty of magic constants, it does not
integrate with existing KPIs, etc. Summa summarum: this should be
rewritten as a more generic toshiba_acpi(4).
2010-04-10 17:55:24 +00:00
02e04bf693
Add a (custom) manual page for iASL.
2010-04-10 04:29:39 +00:00
4a9711fd6e
Connect the pad(4) kernel module to the build on i386 and amd64.
2010-04-09 13:49:12 +00:00
0dd8304ff9
fix build failure.
2010-04-09 11:38:10 +00:00
dd9f9f5796
Add wmihp(4).
2010-04-08 17:44:22 +00:00
8d0a2e3892
Add acpiwmi(4).
2010-04-08 10:06:25 +00:00
238763f6ce
Added support following boards.
...
- AlphaNet MS104-SH4
- TAC T-SH7706LAN Ver.3
- TAC T-SH7706LSR Ver.1
2010-04-06 15:54:29 +00:00
2116ace6a7
Add a NO_LFS define to force support for LFS in sysinst off, even if
...
the install media provides the utilities. Set this for sparc64 for now,
since the bootblocks don't deal with the default LFS parameters used
by sysinst.
2010-04-05 22:53:02 +00:00
6749b41ac2
Also note EtherNEC.
2010-04-05 14:42:38 +00:00
5a31a8eb2b
- note SMC_TT to supported VME-bus devices
...
- capitalize Ethernet
2010-04-05 14:41:35 +00:00
b4deff4fda
Cherry-pick the /libexec content for (non miniroot) CDs and add the sysinst
...
specific dhcpcd hook scripts
2010-04-04 23:02:23 +00:00
8299a0b61d
Remove bogus workaround hiding a real bug: /tmp/dhcpcd-lease should be
...
created by the sysinst specific dhcpcd hook
2010-04-04 22:56:44 +00:00
2866ed0d7d
Ooops, remove leftovers from the ramdisk /
2010-04-02 21:58:46 +00:00
db894a99b3
update portmaster and releng lists
2010-04-02 21:52:55 +00:00
411ff5dead
Move install CDs over to / on cd9660 (instead of a memory disk image)
2010-04-02 21:29:30 +00:00
84ea502702
handle ctime returning NULL.
2010-04-02 15:34:16 +00:00
b433d14156
add necessary build bucatini for kernfs tests
2010-03-31 19:18:39 +00:00
aaf84901aa
+rumpfs_kernfs
2010-03-31 14:21:22 +00:00
9174b80259
Do not bother to ask the user for CD details (like device name or path
...
on the CD) if we can find CDs (i.e. media, not drives) automagically
and check the standard paths on it.
If we find multiple CDs, offer a menu to select showing the volume
name. If something goes wrong, fall back to the manual input method.
In typical installs this makes us just proceed with extracting the sets
after selecting "install from CD/DVD", w/o any further interaction.
As a side effect fixes PR 43012.
XXX new messages need translations.
2010-03-30 20:09:25 +00:00
cd45f4588a
add nullfs/umapfs tests to setlists etc
2010-03-30 01:11:17 +00:00
67933fb73b
add nullfs and umapfs to setlists
2010-03-30 01:01:09 +00:00
c37c27d1c1
Whoops, missed Atffile in previous. shame on me.
2010-03-29 18:49:02 +00:00
231821c9be
jump through the setlist hoops for adding a new test
2010-03-29 18:21:12 +00:00
6b070d58f9
+union and layerfs
2010-03-29 18:15:32 +00:00
9e4fa47492
+ ffs/t_fifos
2010-03-29 13:27:52 +00:00
d8ffac6a1f
+rumpvfs_fifofs
2010-03-29 13:23:43 +00:00
cbdab0119f
In addition to 'hz', document also 'tick', 'tickadj', 'stathz', and 'profhz'.
...
The idea comes from OpenBSD, but this was written largely based on the
comments in kern_clock.c. XXX: schedhz?
2010-03-25 14:59:36 +00:00
7294899bb7
Add pfind(9).
2010-03-25 10:21:09 +00:00
4a1c4330a9
Add stdlib(3).
2010-03-25 07:03:33 +00:00
9b255ab4af
Add rumpdev_ubt and rumpnet_netbt components.
2010-03-22 12:27:46 +00:00
c67c15c2cc
fix build.sh -N 4 distribution failure:
...
+ echo 'MKSOLARIS=yes'
xargs: unterminated quote
2010-03-22 12:03:04 +00:00
d1a604fd21
Document the questionable ISSET/SET/CLR macros.
2010-03-22 10:32:48 +00:00
08053de4ee
Document the weird <iso646.h>.
2010-03-21 21:23:51 +00:00
09b0a44249
Add inttypes(3).
2010-03-21 19:45:58 +00:00
d7219ce78c
Add stddef(3).
2010-03-21 12:30:24 +00:00
464601ba7f
Add stdbool(3).
2010-03-21 11:14:54 +00:00
bd39d09516
Add stdint(3).
2010-03-20 16:38:19 +00:00
229d59407c
Fix set for tparm.html.
2010-03-19 20:31:50 +00:00
cd786ea4c3
Add man page for fast_divide32.
2010-03-19 20:11:21 +00:00
e59c2afa02
Fix entries whose filenames do not actually end with ".sh". (Hi, jmmv!)
2010-03-16 22:01:18 +00:00
e881b496bf
Since we don't crunch/libhack sysinst on this CD, we need to populate
...
the locale information, otherwise the sysinst translations have no
chance to work.
2010-03-16 10:16:39 +00:00
d16ff838ea
Add myself
2010-03-16 09:42:02 +00:00
e8882d78b6
fix MKDEBUG=yes builds for hp300
2010-03-16 01:49:34 +00:00
5f0687fbb0
fix MKDEBUG=yes builds for mvme68k, x68k, ofppc and sun3.
2010-03-16 01:48:53 +00:00
c649ef358c
Register the new tests in sys/rc for rc.d scripts.
2010-03-15 19:03:33 +00:00
0a92db93dc
fix MKDEBUG=yes builds on dreamcast.
2010-03-15 08:03:02 +00:00
5a15d864e9
fix MKDEBUG=yes builds on amiga
2010-03-15 07:28:56 +00:00
36701b9819
fix MKDEBUG=yes builds for newsmips and mmeye.
2010-03-15 07:27:04 +00:00
e042f17320
fix MKDEBUG=yes build for atari.
2010-03-15 06:45:44 +00:00
57f7004c92
fix MKDEBUG=yes builds for mipsco.
2010-03-15 03:16:07 +00:00
a815546e15
fix MKDEBUG=yes builds for mac68k
2010-03-15 02:17:29 +00:00
ce47bd1637
fix acorn32 MKDEBUG=yes builds.
2010-03-15 01:17:36 +00:00
8b557af72b
fix armeb builds with MKDEBUG=yes
2010-03-14 23:32:08 +00:00
0d5e3985de
fix MKDEBUG=yes builds for bebox, prep, rs6000, alpha, cats, macppc,
...
netwinder, shark, sparc* and zaurus. (the other changed files were
already working, but wrong.)
2010-03-14 23:19:18 +00:00
a2d7a57738
fix MKDEBUG=yes build for hpc*
2010-03-14 17:20:08 +00:00
d7edcabe41
change baud rate.
2010-03-14 12:36:32 +00:00
d4c3eb636c
fixes for MKDEBUG=yes.
2010-03-14 09:52:00 +00:00
87836aae66
fixes for MKDEBUG=yes on pmax.
2010-03-14 08:24:18 +00:00
b437338bfb
add add sgivol.debug.
2010-03-14 06:49:57 +00:00
7af5b7b076
remove all references to X11R6-only tools that have R7 ".debug" versions.
2010-03-14 06:49:31 +00:00
02ff0030f1
deal with libnetpgp major bump to 3
2010-03-13 23:33:52 +00:00
9034c8a049
Simplify the console type check by passing -nx to sysctl. Pointed out
...
by Alan Barrett.
2010-03-13 14:05:39 +00:00
4b35b5643b
convert sparc64 to MULTIPROCESSOR kernel by default, and introduce
...
s/MP/UP/ kernels were otherwise in place.
in my testing on a U60, i couldn't really notice any different in
speed, but we need testing on a U1/U5/U10 systems to be sure that
GENERIC.UP isn't necessary.
for sparc64, this is some what required as USIIIi systems have the
memory controller on the CPU, and unless the CPU is spunup, a UP
kernel will not function on these systems. (we obviously need to
join the NUMA-for-netbsd camp now, too! :-)
this should enable the installer to function on all systems that we
support, but also give the option for people to install GENERIC.UP
on their single-cpu systems if they choose.
XXX: i haven't actually tested sysinst with this, but i have built
both sparc and sparc64 release iso's successfully with this change
(sans having to comment out kern_ctf.c.)
2010-03-13 08:36:06 +00:00
e19ffe5ce4
Provide full terminfo.db on install media
2010-03-12 23:07:13 +00:00
f6bf800773
DTrace: Add the Function Boundary Trace (FBT) provider moduile. This
...
module instruments every function in the kernel with entry and exit
probes. These probes are true zero-effect probes in that they don't
exist in the code until they are enabled. The probes are enabled by
directly patching the function entry and exit points to make jumps into
the dtrace framework.
This gives us over 29,000 trace points in the kernel.
2010-03-12 21:53:15 +00:00
e4ef8b1dd7
Use sysctl kern.consdev to check wether we use ttyE* as console - in that
...
case just set up TERM as needed and go straight to sysinst. Otherwise
give a slightly verbose explanation (with common sample values) and
ask for TERM before running sysinst.
2010-03-12 21:36:52 +00:00
b624a04f14
Port uyurex(4) from OpenBSD. There is some XXX but works enough to
...
play with it.
2010-03-11 10:38:36 +00:00
6c6ab6a995
Relegate edlabel to use in extremely memory constrained install
...
ramdisks and prefer disklabel elsewhere.
Based on discussion on affected port lists (port-sparc port-sparc64
port-sun3 port-sun2 port-atari port-mvme68k).
All listed ports plus amd64 test built after change
2010-03-10 23:13:09 +00:00
dbf4dc058b
add rumpfs_mfs to setlists
2010-03-08 12:32:17 +00:00
f9be9a5e45
update for openldap 2.4.21 (add ldapurl, man page for ldapexop, shlib bumps)
2010-03-08 06:40:05 +00:00
b3fbf28e26
Install PCC cpp as libexec/pcpp to avoid name conflicts with other
...
compilers (eg GCC), and to match the manpage which is already installed
as pcpp.1
(Gregory McGarry: "I think it's a good idea")
2010-03-07 16:27:17 +00:00
800cedea24
Add uhso(4) driver and manpage for Option N.V. Wireless WAN modems
2010-03-06 21:05:36 +00:00
9347a4aa25
Since someone (hi ahoka) added a reference to non-existant sched_m2(9),
...
add at least a stub now.
2010-03-06 16:42:55 +00:00
40e5bde73e
Added myself
2010-03-05 22:18:33 +00:00
d50ead3f00
Add roundup(9).
2010-03-04 08:13:29 +00:00
11300caff5
"dtrace,zfs" means "MKDTRACE=yes" *and* "MKZFS=yes" which is not what
...
we want. Invent a flag "solaris" which is the or of those two flags.
2010-03-03 16:13:42 +00:00
404aaa2973
The directory "modules/solaris" depends on ZFS as well.
2010-03-03 14:43:41 +00:00
4423c472c6
The "solaris" kernel module also gets build if ZFS is enabled.
2010-03-03 14:32:29 +00:00
68c2ae2f0f
Make machine/spr.h as obsolete.
2010-03-02 21:54:06 +00:00
3e85fef9b3
DTrace: Add the sdt.h header to the set lists.
2010-03-02 20:04:16 +00:00
ed186a47bf
bump the size of the boot.fs, we bloated.
2010-03-02 08:05:48 +00:00
6a9056a926
DTrace: Add an SDT (Statically Defined Tracing) provider framework, and
...
implement most of the proc provider. Adds proc:::create, exec,
exec_success, exec_faillure, signal_send, signal_discard, signal_handle,
lwp_create, lwp_start, lwp_exit.
2010-03-01 21:10:13 +00:00
4146a232bf
Add setbit(9).
2010-03-01 19:12:49 +00:00
4bd7659c96
Add hztoms(9).
2010-03-01 17:22:20 +00:00
3db029824f
Add tgmath(3).
2010-03-01 16:37:46 +00:00
88c02de084
Add __arraycount(3).
2010-03-01 16:03:34 +00:00
fe2edbeb65
Add __UNCONST(3).
2010-03-01 13:45:54 +00:00
fef6bd65fd
Enable dynamic sizing of the default swap partition
2010-02-28 22:42:44 +00:00
5905514238
Add offsetof(3) man page. From Thomas Pfaff via OpenBSD.
2010-02-27 22:04:37 +00:00
b3f6831537
Add acpiecdt(4).
2010-02-27 16:13:28 +00:00
c4dca15847
obsolete the popcount tests for now
2010-02-27 12:16:50 +00:00
e4cb9ffb2f
Add myself
2010-02-26 21:52:22 +00:00
ff9115fad5
Add <powerpc/ibm4xx/spr.h> and <powerpc/oea.spr.h>
2010-02-25 23:36:31 +00:00
4f7ceb6b4d
Add man page for smscmon(4)
2010-02-22 03:54:24 +00:00
106d393c5c
Remove unnecessary LIBS (-ledit, -lbz2, -lcrypt) for SMALL binaries
...
with libhack.
2010-02-21 20:18:08 +00:00
b61b63add5
Fix indent.
2010-02-21 20:10:51 +00:00
a61bdefffd
Use tiny limited distrib/utils/x_gzip. (no bzip2 and compress support)
2010-02-21 20:09:50 +00:00
93ca9b1e4f
- explicitly specify -Os via DBG for libhack build
...
- set WARNS=1 for sanity
2010-02-21 20:06:19 +00:00
9c220d174d
Add dd(1) to install ramdisk binaries to wipe out existing disklabel etc.
...
Per request from David Ross on port-atari.
2010-02-21 20:04:59 +00:00
95c5212343
Consistently call the file system "ext2".
2010-02-21 13:28:12 +00:00
51998ed2d7
New wbsio(4) driver for Winbond Super I/O attachment of lm(4) on any port.
...
http://mail-index.netbsd.org/tech-kern/2010/02/17/msg007338.html
Reviewed by <pgoyette>, <tech-kern>.
2010-02-21 05:16:29 +00:00
eda67656cd
Add DTrace to sets.
2010-02-21 03:18:45 +00:00
966b72ab39
Update build infrastructure for libarchive 2.8.0.
2010-02-20 02:55:52 +00:00
51e7f65a76
Sort list.
2010-02-20 02:26:14 +00:00
c9c80e594c
Since we call /usr and /var with absolute paths, lets do that for /tmp
...
as well.
2010-02-18 12:21:52 +00:00
d41883434c
add mount_tmpfs
2010-02-17 16:15:15 +00:00
7171f90002
We can now boot from FFSv2, so offer it + even use it as a default.
2010-02-17 16:11:00 +00:00
c82870bc88
eeh says we should not enable fsck_lfs on lfs partitions
2010-02-17 16:09:52 +00:00
da75d7bdc1
Move acpismbus into proper place, alphabetically.
2010-02-16 01:18:02 +00:00
20ecd150d5
Link atomic_cas.3 to atomic_cas_{32,64,ptr,uint,ulong}_ni.3.
2010-02-12 22:34:38 +00:00
d3057cdd9e
Add nmi(9), a manual page for the x86-only
...
nmi_establish(9)/nmi_disestablish(9) routines.
2010-02-12 00:45:37 +00:00
1527fc9caf
Hook kmem_asprintf and vrele_async manpages to the build.
2010-02-11 23:28:53 +00:00
0adc6cef21
Remove terminfo.db as it's now embedded in libterminfo.
2010-02-11 09:06:47 +00:00
808aedb26d
add entries for the suncg14 driver
...
This driver isn't actually useful yet - our kernel cgfourteen driver pretends
to be a cg8, I'll change that next.
2010-02-11 04:09:10 +00:00
c6f1a0115f
add new rump components to setlists
2010-02-11 02:29:23 +00:00
1c23afa3cb
New aibs(4) driver for ASUSTeK AI Booster (ACPI ATK0110) hardware monitor
...
with limit support.
http://thread.gmane.org/gmane.os.netbsd.devel.kernel/35654
Reviewed by <pgoyette>, <jruoho> and <tech-kern>.
2010-02-09 03:19:50 +00:00
aba828dbc5
add myself as per the welcome email
2010-02-08 08:32:58 +00:00
7e6d1f5f00
Use http: for links to files on ftp.NetBSD.org.
2010-02-07 19:43:11 +00:00
a3e31bf1fb
Update version number examples for the post-2.0I world.
2010-02-07 18:50:49 +00:00
31c659dfea
Move MD spllower(9) and splraise(9) doco from the MI spl(9) to an i386
...
manual page.
2010-02-06 22:32:07 +00:00
572b649d58
Add man page for acpismbus(4)
2010-02-06 20:15:54 +00:00
9e0a061a49
Add uthum(4) man page
2010-02-06 11:26:56 +00:00
6467c64e95
add rumpnet_net80211 to lists
2010-02-05 22:07:14 +00:00
16898b5422
add PCC commands and manpages [pcc(1), pcpp(1) and ccom(1)] and libpcc
2010-02-05 19:08:25 +00:00
3b322df2c0
+infocmp.debug +tic.debug
2010-02-05 12:46:33 +00:00
bb3a353864
Use the rescue terminfo.db in our images instead of termcap.
2010-02-05 10:01:16 +00:00
89d790bdbe
Move the emergancy terminfo database from /root to /rescue.
2010-02-05 09:44:23 +00:00
4d083fa19a
Note .terminfo and .terminfo.db in /root.
2010-02-04 21:01:45 +00:00
346b4bb3a1
Don't remove termcap.db from existing systems.
2010-02-04 14:04:59 +00:00
097453b233
add note of "pcc" and "pcccmds" attributes
2010-02-04 13:07:55 +00:00
2f22471206
lib_g is debuglib
2010-02-03 23:13:28 +00:00
98eb889579
Userland now builds and uses terminfo instead of termcap.
...
OK: core@, jdc@
2010-02-03 15:34:37 +00:00
529d2eb4cb
Plug liblzf into build. Liblzf is a small (3504 byte shared library on i386),
...
very very fast, 2-clause BSD-licensed compressor. We provide the LZF_STATE
version of the API, which is not the default for generic liblzf.
2010-02-03 06:25:54 +00:00
a8f33b89f7
Add my name, as specified in the welcome message.
2010-02-02 19:42:32 +00:00
3196bb8213
Make ./build release work with new amigappc port.
2010-02-02 14:13:16 +00:00
291052535a
Make it proper KNF as it should have been done in my previous commit.
2010-02-01 00:39:03 +00:00
57c158572e
Remove duplicate sys/sysctl.h inclusion and put includes in alpabetic
...
order.
2010-02-01 00:06:18 +00:00
ce0b07ef94
Add rump sysmon component to devlists.
2010-01-31 03:09:26 +00:00
7033707525
retire pw_policy(3) -- it is not found useful, there are other
...
(more common) ways to enforce a password strength policy
approved by elad
2010-01-27 19:10:30 +00:00
296908ed7b
Perform in-place replacement of the cypher type instead of renaming the
...
passwd.conf file to passwd.conf.pre-sysinst file and creating a new one
from scratch:
- This is consistent with all other edits of configuration files performed
by sysinst. (E.g. in-place changes of rc.conf.)
- This eases the upgrade of the system to a newer set of files because the
diffs presented by etcupdate are easier to read.
No objections in tech-install@. Tested installing NetBSD/amd64.
2010-01-27 11:02:03 +00:00
ad9684dee2
Install mom macro sets again, per request from Petar Bogdanovic.
...
Don't install generated PostScript files that were part of the reason
for the removal.
Based on a patch by him with slight changes.
2010-01-26 15:11:56 +00:00
0add532ac7
libmagic compat lib is installed again, remove obsolete marker.
2010-01-26 15:08:52 +00:00
964a8c555f
Add sysmon_pswitch(9).
2010-01-26 14:06:35 +00:00
1dc2262518
Convert remaining base-obsolete to comp-obsolete.
2010-01-26 12:45:46 +00:00
b1433fc056
Include all references from sysmon_taskq(9).
2010-01-26 08:30:20 +00:00
27d2b45e99
add bpf kmod
2010-01-25 22:21:28 +00:00
dd88b90491
Add sysmon_taskq(9).
2010-01-25 16:17:10 +00:00
8e22780dd6
Add CTASSERT(9).
2010-01-25 07:57:05 +00:00
0fa8619ec0
Fix some POD errors in the OpenSSL man pages. Regen them. Install some
...
missing man pages.
2010-01-24 21:19:53 +00:00
1ca41e3237
Add a regression test for the SHA2 family that also checks for unaligned
...
accesses.
2010-01-24 21:12:17 +00:00
cc376dc80f
Add timeradd(3).
2010-01-24 21:05:45 +00:00
bfff06930e
Add obsolete entries for percpu_init{,_cpu}(9).
...
As the comment on top says, entries shouldn't be removed, but marked
as obsolete instead. Hi rmind!
2010-01-23 10:40:58 +00:00
48290c7a18
Remove xc_init_cpu(), percpu_init(), percpu_init_cpu() - they are part
...
of implementation, not public API. OK dyoung@.
2010-01-23 00:17:07 +00:00
ea2aef81a8
Rename xc(9) to xcall(9). OK dyoung@.
2010-01-23 00:03:38 +00:00
e54b20a385
Install manual pages for cross-calls and per-CPU storage.
2010-01-22 23:14:28 +00:00
01080eaeac
add bpf.9 manpage
2010-01-20 12:14:00 +00:00
af38b12d6c
Like the comment at the top says: don't remove entries here, mark them
...
obsolete.
Do so for pmf_device_resume_subtree.9.
2010-01-20 07:27:09 +00:00
b042b809d6
Update PMF documentation: rename pmf_device_resume_subtree to
...
pmf_device_subtree_resume. Briefly describe pmf_qual_t and add it to
the PMF function signatures.
There's still a lot left to document.
2010-01-20 00:39:30 +00:00
93750266f6
add rumpdev_bpf to setlists
2010-01-19 22:46:33 +00:00
a764af8493
Add the new latin2 fonts for wscons to the file list.
2010-01-18 16:57:39 +00:00
7d9fce090d
Only a return value below 0 denotes an error in open(2). Found by cppcheck.
2010-01-17 22:48:50 +00:00
af7d8656df
Close file when finished with it. Found by cppcheck.
2010-01-17 22:47:18 +00:00
094674957f
Typo
2010-01-16 16:12:01 +00:00
d8bcc11c1b
Remove tn3270 from sets
2010-01-16 16:10:39 +00:00
8dafc5727f
Remove tn3270 from base system.
...
If anyone really needs it then it can be put into pkgsrc.
Importing c3270 into pkgsrc is probably a better option though.
2010-01-16 15:34:22 +00:00
101ba40c37
add mount_puffs
2010-01-14 21:35:57 +00:00
8fd2d7ce4d
More consistency with obsolete tag:
...
it should be only be accompanied by gcc={3,4} or {xorg,x11}, and only
if they are necessary, i.e. if the same line exists for the other setting
of gcc or xorg/x11.
Make it so.
2010-01-14 13:47:41 +00:00
677bd46137
In addition to setting module=no if ${MKKMOD} is "no", also
...
set kmod=no. This should get evbppc building correctly again.
2010-01-14 13:45:51 +00:00
d016495350
Consistency: set for obsolete files should be "foo-obsolete".
2010-01-14 12:01:58 +00:00
37276ee71d
Consistency: set for obsolete files should be "foo-obsolete",
...
tags only "obsolete".
2010-01-14 10:04:18 +00:00
12e154bf88
Bump the ramdisk size so that the contents fits again.
...
OK'ed by reinoud@
2010-01-13 14:24:58 +00:00
ade14235a9
Add dhcp support to NetBSD/hp700 install stuff.
2010-01-13 10:12:32 +00:00
faac5a2278
Avoid adding -Os to CFLAGS if DBG is set and contains -g.
...
This helps gdb a lot when compiling local debug versions of sysinst.
2010-01-13 07:52:38 +00:00
1aca3c1cd8
Use the proper structs for ioctls to fetch network configuration.
...
Might fix PR 42436.
2010-01-13 07:48:57 +00:00
a0fa2e365c
./usr/libdata/ldscripts/kmodule will not be installed if MKKMOD=no, so
...
add 'kmod' to its keywords.
2010-01-13 01:23:06 +00:00
eaed345c96
bump libm for exp2 and exp2f
2010-01-11 16:30:26 +00:00
4b8d8af4b8
Undocument checkalias() -- it was removed two years ago.
2010-01-08 13:15:45 +00:00
648b32e7e0
vcount() was removed
2010-01-08 13:10:48 +00:00
1e2c1aedaf
Remove documentation for removed macros.
2010-01-08 12:41:33 +00:00
0109fc751f
Install pcq.9 and links. Update set list accordingly.
2010-01-08 06:25:14 +00:00
e9d13d47e1
Add myself
2010-01-07 22:43:00 +00:00
1da1a88e96
Add cas(4) manual page.
2010-01-07 09:23:54 +00:00
2f016ded44
libpmc_g is only available on i386 and arm. Fixes MKDEBUGLIB builds on
...
other platforms.
2010-01-06 19:46:43 +00:00
1b91b7e11c
Fix MKDEBUG=yes sets lists for hp700.
2010-01-06 16:19:07 +00:00
3bb1e78986
Bump the miniroot size from 8m to 9m, so that the contents fits again.
...
OK'ed by mrg@
2010-01-05 18:36:16 +00:00
9c52ca7c82
Revert my unattended change to kadmind.html page
2010-01-04 20:18:02 +00:00
344f97a451
Add device-mapper manual page to build and add it to apropriate lists.
2010-01-04 16:57:48 +00:00
23ee525d3d
Change most of the variables that hold disk sector number to be (at least)
...
uint32_t. Might make sysinst work on disks between 1TB and 2TB.
Not actually tested because I don't have a big disk.
Hopefully I haven't broken the small disk case!
Set WARNS= 4 so that comparisons of signed and unsigned block numbers
are trapped.
2010-01-02 21:16:46 +00:00
7dd4a9773c
Fix another couple of signed v unsigned comparisons of disk block numbers.
2010-01-02 20:54:46 +00:00
8f503a6d66
Fix some of the sign-compare fubar.
2010-01-02 18:06:57 +00:00
6b52b2b9be
Sanitise whitespace to minimise the differences between these files.
2010-01-02 17:15:07 +00:00
ec5b1733ef
No need to install /usr/share/zoneinfo into miniroot
...
because libc functions in libhack doesn't require it and
zoneinfo files seem to get larger since tzcode2009k import.
(due to 64bit time_t support?)
Briefly tested sysinst on sparc miniroot.
2010-01-02 06:46:09 +00:00
48a350b252
Remove LIBS -lz which is already in distrib/miniroot/list.
2010-01-02 06:39:00 +00:00
2087c24e30
Remove -ledit and -lmagic from LIBS.
...
No program requires -ledit in crunched SMALLPROG case, and
miniroot doesn't have /usr/bin/file which requires -lmagic.
(sparc had it but it was removed in distrib/sparc/miniroot/list rev 1.29)
2010-01-02 06:37:28 +00:00
6e8626c060
don't bump libdes - not needed.
2009-12-27 19:26:04 +00:00
bb63eb87ed
new openssh
2009-12-27 01:42:40 +00:00
fe6a4bfaaf
new openssl
2009-12-27 00:53:35 +00:00
72d39b99c8
sets for new bind.
2009-12-26 23:13:15 +00:00
93bd1a122c
Use /dev/fd0a rather than /dev/rfd0a to read instfs.tgz image from floppy.
...
It looks newer (appearred after 1.6) gzip tries to read less than DEV_BSIZE
(to check header?) so we can't use raw device directly.
(note sparc bootfs ramdisk doesn't have dd(1))
Workaround for PR port-sparc/42193, and would also fix PR install/28734.
2009-12-24 14:56:14 +00:00
36338876d4
Add libdwarf lint file.
2009-12-24 01:13:20 +00:00
8a65aabe5b
Fix typo in command output.
2009-12-23 09:13:21 +00:00
666c22984b
Add libdwarf files.
2009-12-23 00:33:25 +00:00
77eb4fd2ef
Update file sets to match atf 0.7.
2009-12-22 13:38:40 +00:00
118e8385d3
remove "mount -t kernfs" line.
2009-12-22 11:15:52 +00:00
6f567e45e4
Add /usr/bin/{tset,more}.
2009-12-22 11:15:25 +00:00
5a5f67b6bf
"Full installation" should install kernel.
2009-12-22 11:14:33 +00:00
664580ff00
Fix MKDEBUGLIB=yes builds: add entries
...
/usr/lib/lib{avl,nvpair,umem,uutil,zfs,zpool}_g.a with keywords
'zfs' and 'debuglib'. Add the keyword 'binutils' to entries
/usr/lib/lib{bfd,iberty,opcodes}_g.a.
2009-12-21 21:09:41 +00:00
3db267ebd3
s/sed/${SED}/; s/xargs/${XARGS}/
2009-12-21 15:37:25 +00:00
2d1090dc2d
Added dmesg, mount_msdos.
2009-12-21 11:22:41 +00:00
6879cbdf8e
create the ecoff copy of the install kernel so the prom can boot it.
...
from PR 39915.
2009-12-20 19:53:36 +00:00
e050282388
Add myself.
2009-12-20 16:59:39 +00:00
cf9dd0698e
Add libelf files.
2009-12-20 05:53:34 +00:00
efa829b8a6
Make SHA1 the first option when selecting cyphers, so one without basic
...
understanding of cryptography won't choose DES as the default on his system.
The default option should be the best possible in case the user is unsure.
2009-12-16 16:03:26 +00:00
0d7850aa0d
Remove HAYAKAWA Koichi's acknowledgement.
2009-12-15 22:30:58 +00:00
00d06c4b46
Add missing entries for libiscsi compat library. Hi mrg@!
2009-12-15 21:54:22 +00:00
930c6ee6c5
Clean up debug knobs.
2009-12-15 06:18:07 +00:00
37e0c45668
update mips64* sets for reality, and fix a couple of newly introduced
...
issues with sparc64 and amd64.
2009-12-15 05:59:50 +00:00
4b2bc9eb2d
Factor out print_set_files() printing raw set list entries out of
...
list_set_files(). While here kill a useless-use-of-cat.
2009-12-15 05:11:08 +00:00
6be5668179
We don't need to check ${MACHINE_ARCH} == "m68000" if we use shlib or not.
...
Because such a knowledge is concentrated in bsd.own.mk and passed to as
${MKPIC}. Tested by build.sh -m sun2 distribution sets.
2009-12-15 05:07:11 +00:00
7dc27f7039
fix a bunch of issues with MKATF=no.
2009-12-15 03:01:15 +00:00
jruoho