Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
65,434 Commits 606 Branches 0 Tags 3.1 GiB
e8d65fec30
Commit Graph

2560 Commits

Author SHA1 Message Date
pk
aca7e7fa24 Just don't force the baud rate in the driver, ever. 2000-03-19 14:58:02 +00:00
pk
86f03b383e Remove __BROKEN_CONFIG_UNIT_USAGE. 2000-03-19 14:43:13 +00:00
pk
753a0ebc67 kd.c should not depend on NKBD. 2000-03-19 14:20:54 +00:00
pk
2ab6f90563 kd.c should not depend on `kbd'. 2000-03-19 14:19:17 +00:00
pk
c969f1b7df Add `fb_is_console()', which is a helper function for frame buffer 
device drivers used to decide whether or not to act as console output.
 2000-03-19 13:48:44 +00:00
pk
b0eba37586 Add fields to hold PROM info to be used in console device matching. 2000-03-19 13:45:23 +00:00
pk
e654ecd0d8 Nuke dead code. 2000-03-19 13:38:54 +00:00
pk
0ed0e258db Declare the prom stdio nodes and arguments. 2000-03-19 13:25:10 +00:00
pk
41fb5989fe Revise console device handling: 
* do not require a `zs' driver for console handling
	* run the console on PROM primitives until a device recognises
	  itself as a console device during normal autoconfiguration.
	* allow (keyboard) devices to take over the input channel of
	  the PROM primitive-based console device.

As a result, consinit() is much simplified and does no longer have
to "detect" devices to setup a working console device. This complexity
has moved to individual drivers which interpret the PROM information
after they have attached to decide whether or not to act as a console.
 2000-03-19 13:22:14 +00:00
mycroft
0af581a1a1 Add a ncr5380_attach() routine which does part of the initialization, attaches 
the scsibus, and does the addref/delref dance.
 2000-03-18 16:13:22 +00:00
tron
e86957458a Install "machineendian_machdep.h". 2000-03-17 22:36:31 +00:00
mycroft
9e21b6555a In the `MY THAT'S GROSS' department... 
Eliminate the recursive include of machine/endian.h from sys/endian.h.
 2000-03-17 00:09:18 +00:00
mycroft
02905321b2 Foolish consistency. Mainly, always use underscores and sys/endian.h. 2000-03-16 15:09:34 +00:00
jdc
e8a33a63d1 Add port power management ioctls. 2000-03-14 21:24:54 +00:00
jdc
48ba774212 Fix RCS ID. 
Add port power management.
 2000-03-14 21:23:45 +00:00
jdc
797ac20035 Add power management hooks. 2000-03-14 21:20:51 +00:00
jdc
fa4417ef0c Add enable/disable and power management hooks for serial ports. 
Port states : always on / on when open (default) / always off
 2000-03-14 21:18:27 +00:00
oster
1bad2e1909 Add the RAIDframe device major to the machine-dependent config files 
so that the right entries get added to dev_name2blk[].  Needed for / on RAID.
(Whoops!  I missed checking these in when adding the RAID_AUTOCONFIG stuff.)
 2000-03-14 15:56:51 +00:00
soren
95054da1a1 Fix doubled 'the's in comments. 2000-03-13 23:52:25 +00:00
mycroft
b27007be2c Make dependall work. 2000-03-13 03:25:20 +00:00
garbled
ea089cf90c New features: 
tctrl now initializes the state of the internal LCD icons.  The icons
are unprogrammed at boot time.  This incidentally makes the DC-POWER icon
work.

Fixes:
Fix my stupidity in the ENVSYS stuff, and actually follow the API.
 2000-03-09 07:04:08 +00:00
kleink
ad7dbd825c Define ISO C99 (unsigned) long long (min, max) symbols. 2000-03-07 19:33:00 +00:00
tsutsui
d16c6f3272 Use DISKPART/DISKMINOR/DISKUNIT instead of dkpart/dkminor/dkunit. 2000-03-07 15:55:14 +00:00
thorpej
a183d34f04 - Implement cnbell() -- ring the console bell. The cn_bell entrypoint 
is optional.
- Add cn_bell to statically allocated consdevs as appropriate.
 2000-03-06 21:36:05 +00:00
mrg
6bf88d7e9a add a "struct device *booted_device" so that raidframe can link. 2000-03-05 08:21:57 +00:00
simonb
4eb55e447c Do the "<space><tab>" thing with the RAID_AUTOCONFIG option. 2000-02-29 06:32:20 +00:00
oster
d9c47013b2 Defopt 'RAID_AUTOCONFIG'. Adding 'options RAID_AUTOCONFIG' turns on 
the component auto-detection and auto-configuration of RAID sets.
Also, add "#options RAID_AUTOCONFIG" to the GENERIC config files.
 2000-02-26 17:35:33 +00:00
pk
546bda740f Revert to using <bsd.prog.mk> again, so we support all targets that may 
be presented when building the system (noticed by Juergen Hannken-Illjes).
 2000-02-26 11:48:15 +00:00
jdc
ecf1c1eb21 Add auxiotwo (Tadpole 3GX aux 2 register) entry. 2000-02-25 18:24:40 +00:00
jdc
7840960350 Driver for Tadpole 3GX "Power Down Control (Aux 2) Register". 
Based on existing auxreg.[ch] (Sparc Aux Register driver).
 2000-02-25 18:17:24 +00:00
pk
9bbc61deaa We need <bsd.obj.mk>. 2000-02-25 16:53:22 +00:00
pk
c64db6cec7 Remove out-dated comment. 2000-02-25 16:02:49 +00:00
erh
8f03b9a04a Define the DONETISR macro and use netisr_dispatch.h. This is to cut down on code duplication and to standardize the available NETISRs across all ports. 2000-02-21 20:38:46 +00:00
pk
dd6a9d86b0 SUN_BOOTPARAM compile-time option is no longer used. 2000-02-21 15:13:11 +00:00
pk
f89828d99f bootxx links at 0x340000 
2nd-stage boot programs choices: 0x200000,0x300000,0x400000,0x700000 (default: 0x300000)
 2000-02-21 15:07:32 +00:00
pk
ea0dbfe79c RELOC -> RELOC_DEFAULT 2000-02-21 14:44:18 +00:00
pk
8305907589 Build several versions of the second-stage boot program, each linked 
to run at a different base address. Boot image build procedures can
pick one which is least likely to fail..

The default boot program is again build to run at 0x340000.
 2000-02-21 14:41:22 +00:00
pk
52014b23c5 Allow second-stage boot program to be specified on the command line. 2000-02-15 16:15:07 +00:00
pk
59742052ea Determine base address at run time. 2000-02-15 14:09:59 +00:00
pk
9bb753bb2e Nuke unused code. 2000-02-15 12:18:05 +00:00
thorpej
fd8c03cf44 Allow arch-specific code to specify in4_cksum() like it can specify 
in_cksum().
 2000-02-14 21:42:50 +00:00
pk
72252544f5 remove `flags' from sun4 zs declarations; the driver doesn't use it. 2000-02-14 18:08:38 +00:00
pk
5b285d9509 Just skip matching the slave' property against cf_unit'. 2000-02-14 18:07:37 +00:00
pk
19533212a5 Correct comments on KGDB_* entries. 2000-02-12 12:59:36 +00:00
pk
b518dc6dfc Eliminate much of the goo in setting up zs device addressing. 2000-02-12 12:51:03 +00:00
thorpej
dded044fc2 Update for the NKMEMPAGES changes. 2000-02-11 19:25:12 +00:00
shin
7f5a7c00ac fix include file. 
<netinet6/ip6.h>	->	<netinet/ip6.h>
 2000-02-09 05:48:26 +00:00
mycroft
bc1ca7aa3f Add a bunch of debugging code, #ifdef FPU_DEBUG, which attempts to 
trap FPU usage in the kernel.
 2000-02-08 03:16:00 +00:00
pk
1d46ce41ea Enable the hme ethernet driver. 2000-02-07 21:24:48 +00:00
thorpej
fe551f0e64 Fix a bug in disksort_*() which caused non-optimal ordering when multiple 
active partitions were on a single spindle.  Add a b_rawblkno member to
struct buf which contains the non-partition-relative block number to sort
by.
 2000-02-07 20:16:47 +00:00
pk
de608f33e1 Don't use PROM the virtual address (if any) for the device registers; 
they are not reliably mapped.  Also, unmap registers if the device
cannot be configured properly.
 2000-02-07 11:44:15 +00:00
kleink
36e6bc645e Improve namespace test macros a bit. 2000-02-05 14:04:36 +00:00
pk
b527153dd7 Ensure uniqueness of EEPROM device without reference to cf_unit. 2000-02-05 12:32:57 +00:00
cgd
7d16ac338c add __BROKEN_CONFIG_UNIT_USAGE #define, becuase these ports do very 
wrong things with device configuration data "cf_unit" information.
 2000-02-05 00:13:22 +00:00
kleink
82464e46d6 Add a C99-style va_copy macro. 2000-02-03 16:16:06 +00:00
tsutsui
11c8f56d48 Revert STRIPPROG -> STRIP 2000-02-01 05:25:24 +00:00
danw
f77befbc84 #define __HAVE_DEVICE_REGISTER on ports that have it, and check for 
that, rather than a list of architecture defines, in config_attach
 2000-02-01 04:01:19 +00:00
pk
00ba4de9e2 Add si' and sw' controllers to device_register() tables. 2000-01-31 15:08:25 +00:00
cjs
26944f9bf6 Add bpp (parallel port) device. 2000-01-28 16:08:52 +00:00
pk
8b07bf2245 standard nomencature: bp -> bh 2000-01-28 15:47:18 +00:00
pk
a5d6b10bad fdcstatus() formatting. 2000-01-28 15:46:20 +00:00
pk
2f0be0855f pv_unlink4m: correctly clear the PV_ANC flag. Noted by Artur Grabowski. 2000-01-28 13:06:02 +00:00
tsutsui
b0fbaa33fb Remove obsoleted macros. 2000-01-26 09:44:10 +00:00
cjs
cfc246f9d8 Don't explode when we've got a lot of RAM. Limit our space for buffers 
to 1/4 of the kernel VM map.
 2000-01-26 07:35:51 +00:00
drochner
8eb798e603 define a "BUS_SPACE_MAP_PREFETCHABLE" flag which basically means that 
device accesses are idempotent (but should not be cached by the CPU)
 2000-01-25 22:13:17 +00:00
tron
04eb110431 Add "dependall" target for comfort. 2000-01-24 20:36:06 +00:00
pk
9cfc74c312 Report write-protected disks. 2000-01-24 16:52:02 +00:00
hubertf
7e5ff67457 Add commented out "ident"-command 2000-01-23 23:46:04 +00:00
pk
18ad190b10 * b_cylin -> b_cylinder; deals with PR9283. 
* a few optimizations & misc. style updates.
 2000-01-23 22:19:12 +00:00
mycroft
7b49d242ce Clean up the machine symlink stuff ever so slightly. Needs to be 
standardized between files.
 2000-01-23 17:04:03 +00:00
pk
d76bf6c906 Try both the BOOTPARAMS and BOOTP protocol (in that order). This also 
takes care of PR#8738.
 2000-01-22 12:34:57 +00:00
thorpej
52242fdf9f Update for sys/buf.h/disksort_*() changes. 2000-01-21 23:28:59 +00:00
pk
df99dfd934 Simplify toggling the FTP bit on sun4m machines. 2000-01-21 13:25:12 +00:00
pk
252d47729f Update FDC offsets used by fdintr.s 2000-01-21 13:24:06 +00:00
pk
6b2ebb44a7 Move several PIL_* definitions into the scope of LOCORE stuff. 2000-01-21 13:22:55 +00:00
pk
f8ac5484fa Medium sized code overhaul: 
* Improve communication between the `hard' and `soft' interrupt handlers
  to better distinguish various interrupt sources.
* Eliminate several race conditions where we would set a time out handler
  only after starting the command on the hardware.
* Handle most timeouts by resetting the controller; there isn't much chance
  of recovery in any other way.  Currently, the exception is a timeout
  on I/O, in which case we first try to pulse the controller's TC line
  in order to abort the pseudo-dma sequence.  Apparently, "normal"
  conditions can induce such a timeout when there's no disk in the drive.
* Reduce the formatting gap parameter to 0x54.
* On the obio bus, interpret the `status' attribute.
* Minimize console diagnostic output if the errors we get appear to be
  caused by the absence of a disk.
 2000-01-21 13:22:01 +00:00
sommerfeld
aa195e816f Fix PR9240: comment above cpu_fork() out of synch with reality on most ports. 
(comment change only, but was wrong for more than just i386).
 2000-01-20 22:18:54 +00:00
wrstuden
87e1b0f9b7 Add overlay to kernel configs. 2000-01-20 19:12:28 +00:00
thorpej
a0397a2573 Move callout initialization to a single location; no need to duplicate 
that code all over the place.
 2000-01-19 20:05:30 +00:00
tsutsui
e61f177ab1 STRIP -> STRIPPROG 2000-01-19 16:29:54 +00:00
tsutsui
644b514c39 Change STRIPFLAGS=-g for cross-toolchains. 2000-01-19 14:44:58 +00:00
thorpej
4f27a98702 Use b_cylinder as defined in sys/buf.h 2000-01-18 19:48:02 +00:00
pk
725c6438c1 Use bus_space(9) functions to access the controller registers. 
Add probes to the attach routines before poking the chip to see
where the registers are located.
 2000-01-17 16:57:15 +00:00
pk
2d7f7ef7a6 Use bus handle to in `struct fdio' to read the chip registers. 2000-01-17 16:53:18 +00:00
pk
611f7a9938 Add offset to bus handle in `struct fdio'. 2000-01-17 16:52:04 +00:00
pk
c31e760978 Add missing `break'. 2000-01-14 15:25:28 +00:00
pk
3cb5a866dd Expand md filesystem to 3.6MB. 2000-01-14 13:41:45 +00:00
pk
e42b2c6cb7 When matching scsi disks, check for the scsibus parent in the previous 
entry in the boot path. Noted by Matthew Jacob.
 2000-01-12 15:53:29 +00:00
mjacob
e7f230b6d2 no need to guess about tgt/lun bounds- we know what they are 2000-01-12 14:53:17 +00:00
pk
7935de2d85 Use a table to detect device aliases and add various `isp' and floppy 
controllers to it.  Also use a table lookup when matching busses/controllers.
 2000-01-11 20:53:24 +00:00
pk
c6b6f3883a Remove old-style boot device recognition. 2000-01-11 12:59:43 +00:00
pk
a744e28304 Cleanup the list of exported headers a bit. 2000-01-10 22:09:34 +00:00
pk
20018b9be8 Add special code for recognising a floppy drive as the boot device. 
Sun's PROMs don't co-operate here, so there are _hacks_ involved...
 2000-01-09 20:53:30 +00:00
pk
a77d141b28 Deal with `24 bit' devices which can still be plugged into an Sbus slot. 2000-01-07 10:54:11 +00:00
pk
8cbc7288d0 * Expand IOMMU DVMA space to top of address space. 
* Remove confusing comments.
 2000-01-04 15:08:30 +00:00
kleink
693059feda const -> __const and include <sys/cdefs.h> earlier; fixes PR lib/9052 
by Takahiro Kambe.
 2000-01-04 14:20:05 +00:00
pk
4681e48204 Remove private kernel members from `struct fpreg'; update accompanying comment. 1999-12-30 23:59:29 +00:00
pk
f152d57aa2 Make sure to reset the FP queue when loading new values into FP registers. 1999-12-29 15:21:27 +00:00
kleink
11e6c54cfc C99: Define a NAN macro in <math.h> which evaulates to a constant expression of 
a single-precision quiet NaN; only to be defined on platforms that do support
this value.
 1999-12-23 10:15:05 +00:00
jdc
016b030623 Added tctrl.h 1999-12-20 09:49:20 +00:00
garbled
e89216c73c avoid uninterruptable sleep on a CMD_REQ ioctl. 1999-12-17 00:32:25 +00:00
thorpej
18ab712015 Provide cpu_boot_secondary_cpus(). 1999-12-16 20:24:58 +00:00
garbled
f02b80418b add <machine/tctrl.h> where needed. 
Add some undocumented commands to the ts102 registers file, and fix a few
typos.

Modifications to tctrl.c:

Add entrypoints to driver for open/close/ioctl/poll.
Make device work with apmd. (still no support for suspend/sleep)
Make device work with ENVSYS API.
Slightly restructure handling of events.
Add function to make microcontroller requests.
 1999-12-15 08:12:30 +00:00
garbled
dd9ad672a9 add entrypoint for tctrl device, and add <machine/tctrl.h> to includes for 
machdep.c
 1999-12-15 08:03:43 +00:00
garbled
5e200de9b7 Add new spl level for tadpole devices splts102. 
Device entrypoints for tctrl device (tadpole micro controller)
add header for direct-access ioctl to the tadpole microcontroller.
 1999-12-15 08:01:00 +00:00
ragge
26e1b45757 clrnd()/clbase() discarding. 1999-12-05 11:56:30 +00:00
ragge
0513268399 CL* discarding. 1999-12-04 21:13:19 +00:00
mrg
b27ecf75a9 oops; remove part of the previous that was not intended (yet). 1999-11-30 07:56:28 +00:00
pk
a24fb44ddf Pull header files from `syssrc' since we use libsa/loadfile(). 1999-11-29 14:49:12 +00:00
mrg
2c11d38827 add some missing #ifdef SUN4M to the MP-handling code. 1999-11-27 14:54:53 +00:00
mrg
9a6c8313f7 minor cosmetic merges; long way to go here. 1999-11-27 12:14:26 +00:00
mrg
264af07cff merge sparc64 types.h; these files are now identical. 1999-11-27 11:33:39 +00:00
mrg
d7e14b468a more sparc64 merging; these files are (basically) identical. 1999-11-27 11:20:41 +00:00
mrg
faa527dcc9 merge sparc64 limits.h; these files are now identical. this includes 
a `fix' for when s?size_t was changed from int to long but the
definitions of S?SIZE_MAX were left as U?INT_MAX.  these are now
U?LONG_MAX.
 1999-11-27 11:14:40 +00:00
mrg
492e85822e MNN has been standard for a Long Time. 1999-11-27 10:22:19 +00:00
mrg
484cb25f55 s/long/int/ to make this identical the sparc64 version. 1999-11-27 10:10:02 +00:00
pk
e0118ca933 Suppress the machine' symlink when making target obj'. 
Also add it to the clean target list.
 1999-11-25 13:27:30 +00:00
pk
633fd1e1cc Check presence of Sbus interrupt properties before using them. 1999-11-21 15:23:01 +00:00
itojun
e9a0023b37 bring in content of GENERIC.v6 into GENERIC. 
remove GENERIC.v6 file (as it is part of GENERIC now).

"faith" interface is commented out by default as it is not really for
general use.
IPsec items are commented out as well, though we can enable "options IPSEC"
without export-related issue ("options IPSEC" will enable authentication
portion only).  We may need to think about it again.

if you have problem compiling with INET6 on archs I do not have access to,
please contact me.

XXX what to do with arch/arm32/SHARK{,.v6}?
 1999-11-21 14:00:37 +00:00
chs
7fa6c707d3 update a prototype for the new pmap_enter(). 1999-11-17 06:16:49 +00:00
fvdl
8bec119fcc Add commented out option SOFTDEP to all GENERIC kernels. 1999-11-15 19:10:44 +00:00
fvdl
d116707af0 Add 
prefix ../gnu/sys
cinclude "conf/files.softdep"
prefix

to all std.* files, so that soft dependencies can be activated using
"options SOFTDEP".
 1999-11-15 19:00:25 +00:00
thorpej
4ab7f024dc Fix a couple of pmap_enter() calls I missed. 1999-11-15 00:06:58 +00:00
thorpej
2cfc62b5ae Update for pmap API change. 1999-11-14 02:39:09 +00:00
matt
3ca3e51df8 Nuke TCP_COMPAT_42. Use sysctl to enable it if required. 1999-11-13 20:56:14 +00:00
pk
a9cdefb6e6 Remove implementation of the -h' and -a' options. 1999-11-13 12:09:41 +00:00
thorpej
1946167939 Update for pmap_enter() API change. No functional difference. 1999-11-13 00:30:26 +00:00
kleink
c52f431558 Bring high-resolution time interfaces closer to SVR4: 
* Change gethrtime() to use mono_time.
* gethrvtime() is defined to return the lwp/process's virtual time;
  use p_rtime augmented with the current runtime.

Reviewed by: christos
 1999-11-12 20:45:44 +00:00
matt
d2434ef890 remove reference to auxiotwo 1999-11-12 06:15:38 +00:00
matt
73ae3282ab turns we need to tweak the auxio1 reg to enable the modem. also fix a call 
to sbus_bus_map.  it's closer to working but I wonder if COM_FREQ is the
right value.
 1999-11-12 05:20:03 +00:00
matt
8ffb2596c7 make this compile under current 1999-11-12 04:42:19 +00:00
matt
3744fe193f add some stuff needed for pcmcia support 1999-11-12 04:41:46 +00:00
matt
1138f7e762 add COMPAT_14 1999-11-11 15:55:53 +00:00
mycroft
8f05f33e49 Move the boot block load address from 3MB to 7MB. The INSTALL kernel is 
already too large, and GENERIC won't be far behind.
 1999-11-09 18:39:41 +00:00
pk
560567d851 Include <sys/exec.h> instead of <a.out.h>/ 1999-11-08 23:29:56 +00:00
pk
a96dbfa190 Remove inclusion of unused headers. 1999-11-08 23:29:05 +00:00
pk
1ad621b38f Handle empty `input/output path' when looking for console device; patch 
from Brian D. Chase.
 1999-11-07 16:36:16 +00:00
mycroft
4c0911c827 Make this more current. 1999-11-07 01:09:12 +00:00
chs
07e5d68b51 several fixes to copy{in,out,}str() from charles and myself: 
don't panic if maxlen == 0, just return ENAMETOLONG.
treat maxlen as unsigned like the manpage indicates.
avoid crashing if the userspace address is >= KERNBASE.
make sure *done is 0 when no bytes are copied.
 1999-11-05 04:49:26 +00:00
kleink
522cbf0248 Update to match new SVR4-style definition names in <sys/exec_elf.h>. 1999-10-25 13:55:06 +00:00
pk
fbfe8a4407 Comply with recent MI scsi changes. 1999-10-21 13:46:06 +00:00
phil
54eed2bc37 Add in the Coda file system and pseudo device. 1999-10-14 16:09:31 +00:00
phil
15ef719178 Add a psuedo-device for coda. 1999-10-14 00:08:45 +00:00
jdolecek
7f589dba84 rename the MD Debugger() to cpu_Debugger() 
add MI Debugger() which switches to console if wscons is used prior
to calling cpu_Debugger()
 1999-10-12 17:08:56 +00:00
pk
8800f180c3 Call find_cpus() much earlier so we can use the result while bootstrapping 
all that pmap stuff.
 1999-10-04 19:27:04 +00:00
pk
de22be977a Since a context table is now pointing at the correct per-CPU region table 
at all times, we can dispense with the hackery that patches the magic entry
at context-switch time.
 1999-10-04 19:23:49 +00:00
pk
b19b1fc269 Each process (i.e. each `pmap') needs a region table for each CPU. 
Implement this by making the fields `pm_reg_ptp' and `pm_reg_ptp_pa'
pointers to an array of `ncpu' region table pointers and corresponding
physical addresses.

This is a somewhat unfortunate side effect of having the per-CPU data
addressable by the same virtual address on each CPU.
 1999-10-04 19:18:33 +00:00
pk
fa65ea182c Implement sysctl `machdep.booted_kernel'. 1999-10-04 19:11:42 +00:00
hubertf
1972c67981 Document what qec, be and qe is. 
Thanks to Jason Thorpe for explaining!
 1999-10-04 19:02:55 +00:00
thorpej
2b02403498 The old dk_establish() hack doens't work anymore, and should be 
garbage-collected.  device_register() is the One True Way.
 1999-09-30 23:01:53 +00:00