e89c38b4c2
Slight cleanup.
1998-01-23 01:14:13 +00:00
753e4909bb
Assume a newline has already been printed in wdcattach().
1998-01-23 01:06:45 +00:00
4ed268e9ac
Print a newline in wdc_isa_attach().
1998-01-23 01:04:54 +00:00
c3d9fda2c3
expand on the checkportcmd option.
1998-01-23 00:56:55 +00:00
22c1670658
Some rearrangement of the startup code:
...
* Move some of the memory bootstrapping and the DDB startup earlier.
* Always put the IDT and the initial GDT and LDT in a separate page.
* Various minor changes.
1998-01-23 00:44:02 +00:00
28b322150f
Synchronize with sys/arch/amiga/dev/zbus.c.
1998-01-23 00:15:08 +00:00
119b962a9d
Add: extern struct cfdriver cgtwo_cd;
1998-01-23 00:01:28 +00:00
66be7643e5
Use the same names as the sun3x (DVMA_MAP_*)
1998-01-22 23:59:45 +00:00
5ba5bda641
Use the same names as the sun3x (DVMA_MAP_*)
1998-01-22 23:45:05 +00:00
33c197e736
Half the include files are unnecessary.
1998-01-22 23:42:39 +00:00
b6be0a1994
Use MONEND instead of DVMA_SPACE_START in the "DDB convenience" symbols.
1998-01-22 23:39:03 +00:00
dd049a163c
Add config flags for tty[cd] to set TIOCFLAG_SOFTCAR.
...
Remove the framebuffer devices (not useful here).
1998-01-22 23:21:57 +00:00
53d89006d1
If on the M68060, make cache-inhibited pages imprecise. Reads and writes
...
are still in-order, but cached reads dont wait for the last write to finish.
Xamiga on a Altais in 8bit-mode became 30% faster servicing xanim (well, 6%
if you count xanim, too).
1998-01-22 23:13:40 +00:00
2c9c7a74bd
Remove the config flags from "si" lines so the driver default will
...
be used. That also makes it possible to patch the kernel in case
the default option causes boot failures or something...
1998-01-22 23:00:24 +00:00
76299bd2c0
Regen.
1998-01-22 22:37:04 +00:00
9fdb0f8782
Add the Millenium II.
1998-01-22 22:36:16 +00:00
8c3664b216
Remove the config flags from "si" lines so the driver default will
...
be used. That also makes it possible to patch the kernel in case
the default option causes boot failures or something...
1998-01-22 22:27:57 +00:00
c292276dcf
Change our DVMA map from the last 16MB to the last 1MB because that is
...
the only part that is visible to VME masters, and is adequate space.
This allows the "si" driver (on VME) to use DMA transfers.
1998-01-22 22:20:35 +00:00
56100bea19
When calling iommu_* functions, use IOMMU_VA_MASK.
1998-01-22 22:12:36 +00:00
0c50bf6487
No need to print the size (it's constant).
1998-01-22 22:09:11 +00:00
19e7bf4dcd
Add: IOMMU_VA_MASK
1998-01-22 22:07:45 +00:00
cc1b4e4724
In pmap_bootstrap_copyprom, copy only the last PTE from the PROM's
...
DVMA segment (for the page reserved by the PROM). If we copy all
the mappings, pmap_enter_kernel may complain about finding valid
PTEs that are not recorded in our PV lists. Make pmap_remove_pte
do something reasonable if it finds a PTE for a managed page that
has not been recorded in the PV lists. (Plus other minor stuff).
1998-01-22 22:00:25 +00:00
58126a3b29
Separate pmap_activate() from _pmap_switch(), so the latter can remain
...
equivalent to what locore.s:cpu_switch does with in-line assembly when
PMAP_DEBUG is not defined. Also do splimp/splx in pmap_activate.
1998-01-22 21:48:42 +00:00
43013bccbb
Use MONEND instead of DVMA_SPACE_START in the "DDB convenience" symbols.
1998-01-22 21:35:27 +00:00
ccf791aa2e
Add: extern struct cfdriver fdc_cd;
1998-01-22 21:26:25 +00:00
c654cd6a87
Fix a bogon that flared up when XSERVER was defopted.
1998-01-22 20:55:48 +00:00
ec1f804952
add back RCS Id which I accidentally deleted.
1998-01-22 20:05:20 +00:00
803943866b
Inherit Makefile.inc from one level up.
1998-01-22 19:29:37 +00:00
2d8fc92f68
Turn on all warnings.
1998-01-22 19:25:15 +00:00
0f69ff1d3b
Bring prototypes into scope, and fix bad printf formats.
1998-01-22 19:24:54 +00:00
ebce232b54
Fix typo in RCS ID.
1998-01-22 19:20:22 +00:00
c17a22a40a
Fix some bugs & annoyances when reparing defect disks
1998-01-22 18:48:43 +00:00
c9c365814e
Regen.
1998-01-22 17:36:16 +00:00
88ff8086d8
Nor COMPAT_09.
1998-01-22 17:36:01 +00:00
91668a26c1
Regen.
1998-01-22 17:34:15 +00:00
95745ffc95
This doesn't actually use COMPAT_10.
1998-01-22 17:33:49 +00:00
0a4f0e60de
Regen.
1998-01-22 17:33:03 +00:00
e8283b7944
This doesn't actually use COMPAT_10.
1998-01-22 17:32:25 +00:00
b77637a440
Fix an old typo that caused shmdt() to fail.
1998-01-22 17:22:52 +00:00
769c9d4707
Clean this up a bit.
1998-01-22 16:33:57 +00:00
c79bc94b0e
Regen.
1998-01-22 16:32:40 +00:00
1e948ee1c3
Put a local copy of the SysV IPC compatibility from compat/common in here, so
...
it's not dependent on COMPAT_10. Also, fix translation of shmctl(), since
FreeBSD's is a little different.
1998-01-22 16:31:33 +00:00
d4c97cbc62
close pr 4868 -- duplicate uucp entry; from Thorsten Frueauf
1998-01-22 16:23:32 +00:00
9219f22775
strchr.c disappeared from libkern, use index.c instead
...
(we can't control the libkern build as we want, but it works...)
1998-01-22 15:48:02 +00:00
8968860bab
add prototype for index()
1998-01-22 15:42:24 +00:00
b613a27fa7
unregisterify
1998-01-22 15:29:13 +00:00
5e3388b0bf
merge with lite-2
1998-01-22 15:23:05 +00:00
01906e318c
Ignore the return code from rm when removing the ${WRKDIR} symbolic
...
link, when doing a "make clean" with WRKOBJDIR defined. From Thorsten
Frueauf.
1998-01-22 11:27:54 +00:00
4872d27a15
Add a MIRROR_DISTFILE variable; defaults to "yes", and should be set
...
to "no" in a package's Makefile when the authors have placed
restrictions on the redistribution of the distfiles. (Thanks to Jason
Thorpe for the idea).
Add a `mirror' target, which will do a "make fetch" if the package's
distfile is allowed to be redistributed. This is for use on sites
which mirror package distfiles. (Thanks to Charles Hannum for the
idea).
1998-01-22 10:20:48 +00:00
201cba44d4
Sync w/ FreeBSD-current-980122:
...
- Rearrange softc for better cache line behavior.
1998-01-22 08:32:35 +00:00
mycroft