Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
45,147 Commits 606 Branches 0 Tags 3.1 GiB
e58cf6b359
Commit Graph

959 Commits

Author SHA1 Message Date
kenh
e58cf6b359 Add definitions for the ATA power management commands 1998-11-05 22:49:09 +00:00
msaitoh
37bbf03777 fix pcic_chip_socket_enable() to works on more machines. 1998-11-05 07:55:48 +00:00
fvdl
7b10c3e7e4 Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards. Rename 
constants from EP_ to ELINK_ since they're now used in the ex driver as well.
 1998-11-04 00:29:28 +00:00
thorpej
cd7f7eff85 Code common to RealTek 8019 and 8029 NE2000-compatible Ethernet chips. 
Includes media selection support and support for Full-duplex.
 1998-10-31 00:44:33 +00:00
thorpej
fa97a53c11 Multiple inclusion protection. 1998-10-31 00:31:43 +00:00
thorpej
992f2906ba Move the RTL8029 register definitions to <dev/ic/rtl80x9reg.h>, and add 
the registers/bits present in the RTL8019 (ISA version).
 1998-10-31 00:27:41 +00:00
nisimura
074bc27605 - Add filenames for VDAC/cursor sprite hardware descriptions; bt431reg.h, 
bt459reg.h, bt463reg.h and ims332.h as pointed by Klaus Klein.
 1998-10-30 00:18:16 +00:00
dante
2cb48d6c4e Add support for macppc. 
Very special thanks to Itsumi Tsutsui for his invaluable collaboration.
 1998-10-28 20:39:45 +00:00
kleink
026fcd0ce2 RCS Id police, canonicalize multiple-inclusion protection symbol names. 1998-10-28 16:26:01 +00:00
nisimura
675a2afc89 - Brooktree Bt459 135 MHz Monolithic CMOS 256x64 Color Palette RAMDAC. 
- Brooktree Bt431 Monolithic CMOS 64x64 Pixel Cursor Generator.
- Inmos IMS G332 Color Video Controller.
 1998-10-28 04:10:36 +00:00
thorpej
56066ad5fb Add media list, media list count, and default media arguments to 
ne2000_attach().
 1998-10-28 00:13:47 +00:00
thorpej
3a9e6f3a29 Define a "page 3", used on some chips which emulate a dp8390, but also 
provide extensions.
 1998-10-27 23:34:17 +00:00
scottr
3a7a7177cc Update for changes to NCR5380_READ() and NCR5380_WRITE(). 1998-10-26 04:44:04 +00:00
scottr
8ed7c47c7a In order for the SCI_CLR_INTR() and SCI_BUSY() macros to work, we 
must actually use the softc pointer provided.  Adjust NCR5380_READ()
and NCR5380_WRITE() appropriately.
 1998-10-26 04:42:47 +00:00
scottr
d4e6677111 Replace architecture-dependent tag/handle field names with 
architecture-independent versions.
 1998-10-25 23:48:29 +00:00
christos
fab7faf6a4 Fix typo 1998-10-25 18:49:18 +00:00
christos
906db1e920 PR/6274: John Ruschmeyer: Add support for the ncr53c80 driver on the i386. 1998-10-25 17:26:41 +00:00
bouyer
88d1b8138c If WDC_DIAGNOSTIC is defined, check in wdcstart() that we are called at 
splbio.
 1998-10-21 09:12:46 +00:00
is
a2386d4325 fully implement soft callback usage 1998-10-20 22:18:13 +00:00
chuck
ce89209d42 when transmitting we cannot totally fill the circular buffer (i.e. 
we can't use up all of the remaining sc->txslot[chan].bfree free
bytes) because that would cause the circular buffer read pointer
to become equal to the write pointer, thus signaling 'empty buffer'
to the hardware and stopping the transmitter.  spotted and fixed
by Kenjiro Cho <kjc@csl.sony.co.jp>
 1998-10-20 17:53:54 +00:00
bouyer
794fadcf0a Donc reset the disk state to 0 in wd.c, set a flag which will cause it 
to be reset to 0 at wdcstart(). This fixes a race condition between
normal I/O and wdioclt().
 1998-10-20 17:00:26 +00:00
is
3ebe847640 Stopgap fix for stupid pasto. Fix for the BAHSOFTCOPY case will be provided 
after more sleep.
 1998-10-19 22:00:14 +00:00
bouyer
96a0812fd8 Kill an extra printf("\n"). 1998-10-15 11:38:04 +00:00
mycroft
d2d873481a pcic_wait_ready(): If we didn't get READY, print out the current status. 1998-10-15 04:04:43 +00:00
perry
6413810bf3 Stop spurious lpt messages from being printed -- approved by fvdl. 1998-10-14 20:09:06 +00:00
dante
773dc968ad Remove some debugging printf 1998-10-14 13:28:47 +00:00
dante
de1d4ba9b0 Change the way uCode is loaded into board LRAM, to let it work on macppc. 1998-10-13 22:57:26 +00:00
bouyer
e8322de657 Add a new drive flag, DRIVE_MODE, set when the drive properly reported its 
PIO/DMA modes. Don't try a SET_FEATURE if it didn't report its mode.
 1998-10-13 15:18:46 +00:00
bouyer
7545a59b8c In debug message, always print controller:channel:drive 1998-10-13 15:02:41 +00:00
bouyer
ff0134b99f Properly separate DEBUF_XFERS and DEBUG_FUNCS: DEBUF_XFERS is for data 
transfers (may be called often), where DEBUG_FUNCS is for setup functions
(not used for normal contitions).
 1998-10-13 09:33:59 +00:00
bouyer
da5d0a6f17 pciide.c: don't define WDCDEBUG, so it compiles on alpha. Correct a bogon 
in the printing of DMA mode (piix3/4 only)
others: set the debug_mask to 0, so that debug messages are turned off by
default but can be easily turned on.
Reset drive_flags to 0 for unconfigured devices, so that they are ignored
later. For configured devices, reset state to 0 after probe/attach.
 1998-10-13 08:59:45 +00:00
msaitoh
39c8c94fa5 make it compile with GWETHER again. 1998-10-13 08:33:05 +00:00
bouyer
19fddaeeb5 Merge bouyer-ide 1998-10-12 16:09:10 +00:00
thorpej
29d472f53d Garbage-collect the open_target_lu and close_target_lu entry points from 
struct scsipi_adapter; they were not used.

Add a scsipi_ioctl entry point to struct scsipi_adapter.  This will be
used to issue ioctl commands to the host adapters.

Inspired by PR #6090, from Matt Jacob.
 1998-10-10 00:28:28 +00:00
dante
423c1d8dd3 Make AdvanSys narrow driver compile on BIG_ENDIAN machines. 
Thanks to Izumi Tsutsui
 1998-10-06 14:44:21 +00:00
thorpej
11bc54234b In epic_init(), attempt to start output on the interface once the interface 
is initialized.
 1998-10-05 19:10:22 +00:00
matt
d9cb3415b1 Fix typo (pointed by Matthias Drochner). 1998-10-02 20:00:28 +00:00
drochner
1693b8b4a6 minor changes to console handling in zstty_attach(): 
-wait 20ms between printf() and reconfiguring the hardware
-set cn_tab->cn_dev here because this is the place where the real minor
 number is known
 1998-10-01 18:52:42 +00:00
matt
bf8783afa4 Fix the receive length so it includes the extra bytes in the fddi_header. 1998-09-28 20:37:12 +00:00
matt
43b462df88 Insert the FDDI control bytes in pdq_ifstart before we load the dmamap 
and dmasync the data.  Fix pdq_os_receive_pdu to use PDQ_OS_HDR_OFFSET
instead of PDQ_RX_FC_OFFSET.
 1998-09-28 18:01:43 +00:00
matt
a1528c368d Fix transmit handling (this also should speed up transmits 
slightly).
 1998-09-28 17:13:54 +00:00
dante
b2a68e14db Change sources to be KNF 1998-09-26 19:53:34 +00:00
dante
da0a3e615e Add support for AdvanSys Ultra Wide boards ABP-9xxUW 1998-09-26 16:09:32 +00:00
dante
c6ccd1d83f Remove Wide boards references 
Adjust copyright

At this time this driver support the following AdvanSys boards:
- ABP-9xx
- ABP-9xxU
- ABP-9xxUA
 1998-09-26 16:02:56 +00:00
mark
7d6c07a559 Use the data32iot and data32ioh members of the wdc_attachment_data 
structure for 32 bit transfers.
Test for 32 bit capability on data transfers currently restricted to 16 bit
only.
 1998-09-22 00:27:51 +00:00
mark
962edcdc03 Add data32iot and data32ioh members to the wdc_attachment_data structure. 
This bus space tag and handle is used for 32 bit data transfers i.e.
when WDC_CAPABILITY_DATA32 is enabled as the 32 bit data register may
not be part of the standard drive registers.
 1998-09-22 00:21:16 +00:00
pk
0b10e1ddab Parallel port support routines. 1998-09-21 21:26:51 +00:00
matt
ad921921e4 Add softserial to the alpha port. This significantly improved PPP 
throughput on com ports.
 1998-09-21 00:33:16 +00:00
matt
08e1d890a4 Changes so that BPF readers will get the data in fddi packet aligned along 
normal boundaries.  This makes tcpdump much happier.
 1998-09-20 02:36:08 +00:00
matt
935fbed4fe Make sure data in FDDI packets are aligned nicely (for alpha, etc.) 1998-09-19 21:21:25 +00:00