1227a240f1
driver for Prolific PL2303 serial adapter.
...
I/O DATA USB-USAQ2 work.
2001-01-23 01:24:10 +00:00
fe3273fbb4
Patch from PR kern/8001, submitted by Rafal Boni.
...
This adds support for EtherExpress/16 cards with 16k of RAM, and in the
process adds general support for PIO mode on these cards. This entails
changing the way the i82586 driver handles bus barriers, since it doesn't
allow for strange cases like this.
This has been tested on the i386 port with the 'ix' driver in both
16KB (which was the source of the problem) and 32KB modes, as well
as with the 'ef' driver. I've tested it (briefly) with 'ei' on arm26
as well. In theory, drivers other than 'ix' should follow precisely the
same code paths as before.
2001-01-22 22:28:43 +00:00
e055513a28
Nuke useless argument to ld_twe_dobio().
2001-01-22 21:56:11 +00:00
69fd9caaae
Don't IFQ_SET_READY() -- this driver isn't ALTQ'ified.
2001-01-22 21:38:35 +00:00
7575649e53
Minor optimisation.
2001-01-22 17:44:28 +00:00
03463e18f1
opt_twe.h isn't needed any more.
2001-01-22 17:40:14 +00:00
8771c04bd1
Don't artificially clamp the maximum number of outstanding commands.
2001-01-22 17:38:23 +00:00
9c7e523b64
- Complain if interrupt-driven retrieval of AENs fails somehow.
...
- Clamp the number of outstanding commands to 129.
- Other tweaks.
2001-01-22 17:32:11 +00:00
9e7736f1dc
make patches[] const
2001-01-22 14:30:43 +00:00
29d563fd5b
regen: US Robotics (3Com) 56K Voice Internal PCI Modem (WinModem) entry added
2001-01-22 14:18:42 +00:00
0f1dba40c7
add US Robotics (3Com) 56K Voice Internal PCI Modem (WinModem) entry
...
I wish I'd been less foolish and not bought this device ...
2001-01-22 14:15:24 +00:00
5d9e997522
Regen for stallion.
2001-01-22 13:58:37 +00:00
c77d1a22c4
Add stallion products.
2001-01-22 13:57:54 +00:00
577ac6e31c
Remove the line in audio_open which zeroes sc_[pr]r.blksize.
...
Because zeroing them causes zero division panic with devices which don't
support 8kHz mulaw, and the effect of this line was to force calling
audio_calcwater even when unnecessary.
2001-01-22 08:37:54 +00:00
f2d987f8a4
Force certain commands (i.e. DVD authentication) to PIO mode. They are
...
explicitly not supported in DMA mode, and generally return an `illegal field
in CDB' error.
This should have been done ages ago.
2001-01-22 07:00:39 +00:00
135068fdc8
Add clct.
2001-01-22 02:22:35 +00:00
972d156775
Clean up a little.
2001-01-22 01:44:56 +00:00
45116f2c38
Add clct driver for Cirrus Logic CrystalClear PCI Audio CS4281.
...
Driver written by Tatoku Ogaito.
2001-01-22 01:34:42 +00:00
22a541e778
Add a comment.
2001-01-22 01:13:47 +00:00
7090ce901d
Defer stopping the interface on error to a process context.
...
XXX The cue changes have not been tested, since I don't have a cue adapter.
2001-01-21 22:09:23 +00:00
dfa2282053
Change watchdog routine. (From FreeBSD.)
...
The only thing stopping us from getting totally rid of the evil
USBD_NO_TSLEEP hack is the (broken) assumption in the MII driver that
registers can be read and written without a process context.
2001-01-21 19:42:29 +00:00
2a7443922d
Get rid of `#ifdef FreeBSD'; they maintain their own version.
2001-01-21 19:36:31 +00:00
aa75661373
Use the new usb_add_task() call to execute the statistics gathering.
...
This gets rid of the evil USBD_NO_TSLEEP hask from the cue driver.
2001-01-21 19:30:35 +00:00
996efaa78c
Ad a comment.
2001-01-21 19:00:29 +00:00
df20cb2972
Change the operation of the USB event thread. Before it only performed
...
USB device discovery, now it can also perform (short) tasks for device
drivers that need a process context, but don't have one.
This is not pretty, but better than using busy-wait in an interrupt context.
2001-01-21 19:00:06 +00:00
d8f68f3949
Add a quirk for devices that cannot handle full length INQUIRY.
...
From FreeBSD.
2001-01-21 18:56:38 +00:00
8502ed9498
Remove `#ifdef FreeBSD'; they maintain their own version.
2001-01-21 16:55:11 +00:00
3966e66ec8
Untangle some spl-spaghetti in cy_modem_control().
2001-01-21 16:55:10 +00:00
e391b64407
Change watchdog code (from FreeBSD).
2001-01-21 16:06:48 +00:00
1d6d81b317
Get rid of `#ifdef FreeBSD'; they maintain their own version.
2001-01-21 16:03:11 +00:00
25c15e3189
Regen.
2001-01-21 15:58:01 +00:00
f4f53b10ea
Another hub.
2001-01-21 15:57:41 +00:00
b2245c50fc
Several changes:
...
* Get rid of `#ifdef FreeBSD'; they seem to maintain their own version.
* Change watchdog code (from FreeBSD).
* Get rid of the horrible USBD_NO_TSLEEP hack.
* Repair some const damage.
2001-01-21 15:55:05 +00:00
0906d8d1fe
Rasops supports 4bit depth.
2001-01-21 13:50:58 +00:00
e8db629494
Add code to use soft interrupt to handle USB interrupt processing.
...
Don't enable the code since it doesn't work with the kludgy Ethernet drivers.
2001-01-21 02:39:52 +00:00
0c40fe5115
Ad define for warm boot rev.
2001-01-21 02:35:31 +00:00
29984607e8
Trim space off both ends of device product and vendor strings.
2001-01-21 02:34:34 +00:00
8894e84df0
Use a better way to test if we are cold starting the device. (From FreeBSD)
2001-01-21 02:33:52 +00:00
60708ce539
Regen.
2001-01-21 02:28:55 +00:00
27293db05d
A couple of new devices (from FreeBSD).
2001-01-21 02:28:30 +00:00
227c27096f
Add some initialization to struct ifnet that seems to have become
...
necessary.
2001-01-21 02:22:27 +00:00
1aca8405a5
Cosmetic changes.
2001-01-21 00:07:13 +00:00
f7dc96fe4c
Change some splusb() to splhardusb().
2001-01-20 23:36:02 +00:00
541fa6ecfa
regen
2001-01-20 20:53:34 +00:00
2d5b0a4ff5
typo fix
...
reported by kei_sun@ba2.so-net.ne.jp
2001-01-20 20:53:07 +00:00
13ad8f5ba7
Pack the minor numbers like the Cyclades-Z driver does, and
...
make the dialout bit compatible with the other serial drivers
(and with what MAKEDEV generates for dtyCYxxx).
2001-01-20 19:29:05 +00:00
3aef368a04
Use device_lookup() in cztty_getttysoftc().
2001-01-20 19:10:36 +00:00
ddbaea62cb
Garbage-collect some unused macros.
2001-01-20 19:08:24 +00:00
9eefbe5b74
Regen; there is absolutely no point in having a FreeBSD RCS ID in this file.
2001-01-20 17:04:03 +00:00
7ad2150248
There is absolutely no point in having a FreeBSD RCS ID in this file.
2001-01-20 17:03:32 +00:00
ce1c8f1a25
Regen.
2001-01-20 08:50:30 +00:00
da5294450d
In 1.111
...
> o Add RATOC REX_R280 card.
Since this already exists in pcmciadevs, delete it for preventing compile error.
2001-01-20 08:49:53 +00:00
1d15673dae
consistently use FE_DEBUG (DEBUG was used a couple of places where it
...
was obvious that FE_DEBUG should have been used instead)
2001-01-20 07:31:00 +00:00
6549452c38
Don't deref NULL when searching for the correct board.
2001-01-20 04:19:21 +00:00
c38c39fc9b
Only need to pass a cy_softc * to cy_attach().
2001-01-20 02:26:39 +00:00
44ff75e3c5
ANSI'ify.
2001-01-20 02:24:16 +00:00
a0f7017e2e
Clean up the PCI attachment a bit, and adjust the other pieces
...
to suit.
2001-01-20 02:15:01 +00:00
cd3120ae66
Sync to pcmicadevs 1.111
2001-01-20 01:58:12 +00:00
d93492c616
Sync file with FreeBSD 1.8:
...
o Add NAKAGAWA METAL's LNT-10TN card.
o Add KINGSTON KNE-PC2 ethernet card.
o Add RATOC REX_R280 card.
o Add $FreeBSD$ id.
I've not added these cards the their respective drivers, however.
2001-01-20 01:56:16 +00:00
905ef1b7fa
Use the SCSIACCEL ioctl() to turn on TAG QUEUEs.
2001-01-19 23:04:23 +00:00
4a962c6cd9
Retry requests if the CD-ROM drive returns the sense code "Device in
...
Process of Becoming Ready".
2001-01-19 22:47:46 +00:00
28899ce913
Add another CIS variant for ELSA mc/isdn card
2001-01-19 20:04:07 +00:00
88e7f62500
regen
2001-01-19 17:28:58 +00:00
ee8a058b1d
add USB serial adapter
...
I/O DATA USB-RSAQ2 (use PROLIFIC PL2303 chip)
2001-01-19 17:28:15 +00:00
0f589a40df
Nuke all uses of splimp() in the isdn subsystem, replace by splnet().
2001-01-19 12:44:44 +00:00
e07a5ff574
constify
2001-01-19 08:54:21 +00:00
b4ef15f3bc
- paint underline on text honouring WSSCREEN_UNDERLINE.
...
- use accellerated painting for text cursor, should improve speed.
2001-01-19 05:43:43 +00:00
79c6c8ec3f
Make this compile again after const-ification.
2001-01-19 04:01:10 +00:00
c423d2c0f9
Add support for another PCMCIA ISDN card: Sedlbauer speed star II.
...
While there fix two outdated comments.
2001-01-18 22:13:59 +00:00
34c8ae80da
constify
2001-01-18 20:28:15 +00:00
e58532a4bf
No-op commit to force update to a non-"-kk" revision.
2001-01-18 17:47:58 +00:00
62fde088a1
adapt to pci_knowndevs[] being const, make local constant arrays const
2001-01-18 13:12:13 +00:00
4ad663531b
regen: make pci_knowndevs[] const
2001-01-18 13:11:22 +00:00
771d1f2f35
make pci_knowndevs[] const
2001-01-18 13:03:22 +00:00
aa204493b9
Regen; Intel Gigabit Ethernet update.
2001-01-17 20:56:47 +00:00
29002abf43
Update the Intel Gigabit Ethernet entries.
2001-01-17 20:55:47 +00:00
3d0bbf9152
Filter "receive process failed to idle" on noisy chips (like the
...
ADMtek AN985).
2001-01-17 19:37:09 +00:00
193fd06950
Fix comment.
2001-01-17 08:37:09 +00:00
1d8bb9f134
managed to make this useful enough for screen editor.
...
- video base register value brings different scanline starting address
of framebuffer depending on VRAM chip column size.
many other issues left unsolved.
- text rendered in incorrect colours.
- acceleration codes should be reimplemented from scratch.
2001-01-17 06:48:09 +00:00
fc5dafc79b
Fix a rather annoying problem where the sockaddr_dl which holds
...
the link level name for the interface (ifp->if_sadl) is allocated
before ifp->if_addrlen is initialized, which could lead to allocating
too little space for the link level address.
Do this by splitting allocation of the link level name out of
if_attach() and into if_alloc_sadl(), which is normally called
by functions like ether_ifattach(). Network interfaces which
don't have a link-specific attach routine must call if_alloc_sadl()
themselves (example: gif).
Link level names are freed by if_free_sadl(), which can be called
from e.g. ether_ifdetach(). Drivers never need call if_free_sadl()
themselves as if_detach() will do it if it is not already done.
While here, add the ability to pass an AF_LINK address to
SIOCSIFADDR in ether_ioctl() (this is what caused me to notice
the problem that the above fixes).
2001-01-17 00:30:49 +00:00
d418f0d68c
Add support for AN985-based CardBus network interfaces.
...
From Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp>.
2001-01-16 18:55:00 +00:00
23ded7f4c2
Regen; ACCTON and AboCom AN985 Ethernet devices.
2001-01-16 18:43:19 +00:00
cb7242ca2f
Add some ACCTON and AboCom AN985 Ethernet devices.
2001-01-16 18:42:56 +00:00
2663816278
Fix register offset botch when setting the multicast filter on
...
the ADMtek AN985.
2001-01-16 17:33:24 +00:00
58acc910af
regen
2001-01-16 15:57:54 +00:00
417efc284d
Add Roland SCP-55
2001-01-16 15:56:48 +00:00
1d25789f34
Update with recent files.
2001-01-16 11:54:13 +00:00
f20b78bb5d
Add a definition for PMAGD which should cover all (three?) variations of
...
it. Left commented out until DECstation switchs to WSCONS.
2001-01-16 05:49:41 +00:00
bd7039cbdb
- relocate the code to place sprite cursor inside interrupt handlers
...
called on every virtical replace.
- efforts to make the code strucutures similar across TC framebuffers.
2001-01-16 05:32:16 +00:00
f493d886c1
- make this more senseful 32bpp TC framebuffer. This is far less broken
...
than the preivous code. It can show readable characters on screen.
Tested only with 32bpp model of PMAGD opion card. Need more work for 8bpp.
- 2D accelleration will be revamped to ultilize SFBplus features.
- there seems much mulfunctionness in 32bpp codes of /sys/dev/rasops/.
Need to rectify every corners.
2001-01-16 05:06:02 +00:00
6fe782cff1
Use the real Y@P firmware. Permission granted by Kamal Parmar,
...
<kamal@siliconportals.com>, at Silicon Portals.
A big thanks to Silicon Portals for being cooperative (unlike many USB
device vendors).
2001-01-16 03:10:09 +00:00
058f408c59
Regen.
2001-01-15 23:29:28 +00:00
a1df526434
Add the 66MHz version of the Symbios 53c1010.
2001-01-15 23:29:04 +00:00
674a20f8fb
powerhook fixes, from thorpej, tested by me. Thinkpad T20 sound now perfect.
2001-01-15 23:25:39 +00:00
3bb7b7df87
Fixes from OpenBSD via chopps. Audio now works on my Thinkpad T20
...
provided I don't suspend the thing...
2001-01-15 22:28:20 +00:00
a8d16ea901
Move decl out of __HAVE_OLD_DISKLABEL
2001-01-15 21:29:30 +00:00
4d7a6c1fda
Move declaration out of __HAVE_OLD_DISKLABEL ifdef.
2001-01-15 21:27:21 +00:00
2ed1e48455
List two USB MIDI I/Fs; YAMAHA UX256 and Roland UM-1.
...
These devices, however, aren't conforming to USB-MIDI class spec.
BTW, here is very experimental version of the driver for these devices:
http://www.imou.to/~AoiMoe/UNIX-at-Random/garbage/umidi-2001-01-15.diff.gz
2001-01-15 20:26:46 +00:00
9b47b68152
abandon an attempt to have 8bpp textop and 32bpp textop parallelly.
...
Pursuade a unified logic effective for both depths.
2001-01-15 09:45:30 +00:00
452e3d1a2f
fix a typo and rearrange a comment about SFB register aliasing effect.
2001-01-15 09:41:57 +00:00
3a6d3e0771
use ri_devcmap[] values directly, instead of calling rasops_unpack_attr().
...
-
2001-01-15 09:37:42 +00:00
845a2d5b53
Fix comment typo.
2001-01-15 03:52:03 +00:00
45de366b2e
Rename __GENERIC_SOFT_INTERRUPTS to __HAVE_GENERIC_SOFT_INTERRUPTS,
...
and place the definition in <machine/types.h>. This can now be used
as a flag to indicate whether or not <machine/intr.h> can be included
to get the generic soft interrupt API.
2001-01-14 23:50:28 +00:00
4d81dcf9c1
splimp() -> splvm()
2001-01-14 21:28:16 +00:00
372338915a
Use splnet() to block network interrupts, not splimp().
2001-01-14 17:37:41 +00:00
bf4e834543
ELSA XI-300 WaveLanCard (PRISM2) work.
...
OEM. ADLINK 330C
http://www.adtec.co.jp/CGI/parts/parts_detail.cgi?product_id=ADLINK330C
2001-01-14 06:54:01 +00:00
cfb6a0b2c6
add missing sc->dying initializer at midiattach.
2001-01-13 16:16:12 +00:00
3a10cc3d0a
add detaching/deactivation code to midi driver.
2001-01-13 16:09:04 +00:00
dd7e31f012
The mask tables have no excuse for being in the data segment.
2001-01-12 23:03:52 +00:00
bc9dd935cf
Fix bug which affects pciide controllers in native mode (found by
...
Paul Kranenburg, many thanks !): the control register I/O is 4 byte long
although only one is used, but the control register is at offset 2, and not
0 as expected by IC code. Use bus_space_subregion() to get a handle which
points to the control register, and is one byte long.
2001-01-12 16:03:59 +00:00
12a14b346e
match T1 card. from freebsd driver, it should just work.
...
i'll test it as soon as i get the card handy.
2001-01-12 05:19:18 +00:00
78fdca968e
regen
2001-01-12 05:14:36 +00:00
c1285a8caf
add product ID for LMC T1 card. from freebsd.
2001-01-12 05:13:47 +00:00
e94e4a6d47
Move interrupt mapping before initialization of the card (which might
...
cause interrupts). This works around a problem on sparc64, where
interrupts without installed handler seem to cause heavy lossage (and
interrupts are already enabled at this stage of autoconfiguration).
2001-01-11 22:46:40 +00:00
8fcc8721da
Put the UQ_ASSUME_CM_OVER_DATA quirk back in. Without it, the Ricochet GS modem fails to work even with the other changes.
2001-01-11 20:35:02 +00:00
0d99070cf2
Change wi(4)'s default from ad-hoc mode to BSS mode. Also
...
some minor manpage fixes.
2001-01-11 19:33:51 +00:00
4f8dfdb556
Don't copy Rx packet to mbuf if it has invalid length; just discard it.
...
Fixes kern/11877.
2001-01-11 14:38:58 +00:00
366e0029a8
Ad ezload attribute for EZ-USB firmware loader.
2001-01-11 13:14:08 +00:00
3a755611ac
about WI_TIMEOUT:
...
It is not enough to initialize NANOSPEED ROOT-RZ2000 WLAN Card.
In fact, this card needs about 66900 counts.
2001-01-11 11:54:21 +00:00
a86eb3e683
NANOSPEED ROOT-RZ2000 WLAN Card work.
...
(PRISM II)
2001-01-11 11:37:54 +00:00
c8cf783ce8
regen
2001-01-11 11:33:19 +00:00
b7cad127b5
add product
...
NANOSPEED ROOT-RZ2000 WLAN Card
2001-01-11 11:32:56 +00:00
35e36fee18
Add USSCANNER_DEBUG
2001-01-11 06:33:51 +00:00
d03f7a8f4b
Mention that I found protocol info in the Linux driver.
2001-01-11 06:33:22 +00:00
7d90b0cb9c
Note that I got information about the protocol from the Linux driver.
2001-01-11 06:20:04 +00:00
4dc9c52505
Add usscanner and uyap.
2001-01-11 06:01:18 +00:00
8765aa2c42
Add a driver for HP5300 which uses a homebrew SCSI-over-USB protocol.
...
Furthermore, it uses Avisions scanner-over-SCSI protocol (but that's
not visible in the driver).
Thanks to Lloyd Parkes for testing and debugging and to Jukka Marin for
testing.
XXX This driver should be extended to handle Microtek scanners as well.
2001-01-11 06:00:31 +00:00
35b9cac9d5
regen.
2001-01-10 23:48:54 +00:00
263cb744f8
add EMTAC A2424i 11Mbps WLAN Card
2001-01-10 23:47:56 +00:00
8c2f65891f
Prefer memory mapping over io mapping for this card too,
...
although it doesn't have a chance to work on a no-io system because
of an io based BAR lacking a mem counterpart.
2001-01-10 21:41:36 +00:00
a42939d604
Make the driver try mapping memory first, the try io.
2001-01-10 20:31:49 +00:00
fc0f2f8909
Added four config entries for the DLink DE-650CT.
...
XXX I think we should have if_ne_pcmcia.c try to allocate I/O addresses
around 0x300 or we'll end up with a lot of quirks for NE2k based
cards which have bad CIS's.
2001-01-10 17:37:27 +00:00
6b133efd3e
Make this work with the SA 431 and 42xx series controllers.
2001-01-10 16:48:04 +00:00
3ba997a164
Add the 53c1510d and 53c895a. 1510d confirmed working by
...
Mark Davies <mark@MCS.VUW.AC.NZ>.
2001-01-10 15:50:20 +00:00
6c3ff254ea
Get rid of (unintentionally added) ^M.
2001-01-10 14:58:08 +00:00
234840a1ae
Initialize the FBC mode register in cg6attach().
...
Values are taken from sunGX.[ch] in xsrc.
Now RASTERCONSOLE works properly on my SS1+ with old 2-slot sbus cg6.
2001-01-10 13:26:52 +00:00
3d5c5173f5
Add a quirk table for specific implementations.
...
Change the NEC-specific subvendor test for GPIO initialization into a more
generic quirk table flag.
Add a quirk flag for hardware that has left and right channels reversed
(currently the COMPAL 38W2 a.k.a. Dell Inspiron 5000e)
Clean up PCM channel initialization and add channel swapping option.
2001-01-09 23:27:07 +00:00
6ec1759deb
regen
2001-01-09 23:20:22 +00:00
ca3478d0e2
Add COMPAL vendor and COMPAL 38W2 product (OEM for Dell Inspiron 5000e)
2001-01-09 23:19:03 +00:00
d11cfe3c79
Regen; added Symbios 53c1510D.
2001-01-09 23:16:18 +00:00
ff00b6c009
Add Symbios 53c1510D.
2001-01-09 23:15:39 +00:00
cb2d30303b
Add new AC97_HOST_SWAPPED_CHANNELS host flag that causes left and right
...
mixer channels to be swapped (required for hardware that has wiring
reversed).
2001-01-09 23:14:25 +00:00
ba45ad64d3
Ifdef some routines only needed for ELSA Quickstep cards when compiling
...
without support for those.
2001-01-09 21:26:30 +00:00
442e2e73a9
ISPASYNC_PDB_CHANGED -> ISPASYNC_LOGGED_INOUT.
2001-01-09 18:56:24 +00:00
64c3b7f881
Add some 2X00 specific state flags for status response entries. Add the
...
defines necessary for the REGISTER FC4 TYPE SNS subcommand.
2001-01-09 18:56:06 +00:00
5599d31360
ISPASYNC_PDB_CHANGED->ISPASYNC_LOGGED_INOUT. And also, ISPASYNC_CHANGE_NOTIFY
...
is for both local loop and fabric cases now.
2001-01-09 18:54:53 +00:00
81df08ddef
Use a SNS REGISTER FC4 TYPE subcommand to register with the name server.
...
This means we should be able to work with McData switches now. Change
ISPASYNC_PDB_CHANGED to ISPASYNC_LOGGED_INOUT (more descriptive). Allow
F-Port topologies to use target ids 0..125 to log into fabric devices.
Yet again fool around with defaul WWN stuff.
2001-01-09 18:54:06 +00:00
1b4eef2721
- Make VDAC state per-board.
...
- Add an ioctl to reset the STIC.
- Add an ioctl to restore the screen contents from backing.
- Other tweaks.
2001-01-09 16:04:03 +00:00
0ed2fcf9fb
*minor* knf
2001-01-09 06:36:13 +00:00
ac6176f581
Fix some oversights from fixing option names.
2001-01-09 00:46:01 +00:00
ichiro