057795048f
this is the i386 MD portion of the MACHINE_NEW_NONCONTIG code, as
...
written by chuck cranor. thanks to mycroft for helping me find the
one little line of code i accidentally deleted while merging it.
this is not enabled by default. `options MACHINE_NEW_NONCONTIG'
will use this code. eventually, this should go into <machine/vmparam.h>
insteaed of MACHINE_NONCONTIG.
1998-01-13 12:52:16 +00:00
7b093957d3
interrupt name change "softtty" -> "softserial"
1998-01-13 03:52:49 +00:00
687449a900
Update for changes to config.
1998-01-13 02:09:58 +00:00
a8dda8092d
Commit to MACHINE_NEW_NONCONFIG.
1998-01-13 00:58:56 +00:00
418fd96bd5
Turn NEW_NONCONTIG page upload code into a routine shared by sun4/4c
...
and sun4m pmap_bootstrap()s, simplify it, and make it not loose the
couple of slack pages we painstakingly remembered in pmap_bootstrap.
1998-01-13 00:55:15 +00:00
3b7ef50f8e
Missed a change for the updated config(8).
1998-01-12 23:56:26 +00:00
f32f947061
Update for changes to config.
1998-01-12 20:52:29 +00:00
2565ff444a
Update for config changes.
1998-01-12 20:35:04 +00:00
1adb4489a6
Update for changes to config.
1998-01-12 20:23:38 +00:00
0475e09198
Update for changes to config.
1998-01-12 20:04:24 +00:00
ac71bb86e2
This file was apparently accidentally ressurected.
1998-01-12 19:59:00 +00:00
2d53e59a47
Update for changes to config.
1998-01-12 19:51:03 +00:00
36760d9d94
Update for changes to config.
1998-01-12 18:59:04 +00:00
871cf5e7ce
Update for changes to config.
1998-01-12 18:30:41 +00:00
1ac3d5db35
Put SPU options in opt_spuconf.h, add device classes.
1998-01-12 18:29:48 +00:00
cfdba7eac6
Update for changes to config.
1998-01-12 18:18:01 +00:00
2d73f5ea18
Update for changes to config.
1998-01-12 18:03:58 +00:00
0b6e56ec02
Adjust for changes to config.
1998-01-12 10:39:01 +00:00
5419debcb7
Adjust for config changes.
1998-01-12 10:21:02 +00:00
c5f6a2dbb3
Add (commented out) COMPAT_13
1998-01-12 07:09:24 +00:00
83c4c24058
Add "non-volatile" memory cluster usage bit.
1998-01-12 07:07:19 +00:00
1f703bce45
Sync w/ dev/isa/wdc.c
1998-01-12 06:08:41 +00:00
38efb3ac5f
add The Be interrupt controller setmask function(bebox_intr_mask).
...
change SINT_TTY to SINT_SERIAL
splsofttty to splsoftserial, and so on.
1998-01-12 04:57:10 +00:00
54719a53a3
More comments and general re-organization (group by device class) provided
...
by Todd Vierling.
1998-01-11 23:32:55 +00:00
1ef77e68aa
Oops, fix a printf format.
1998-01-11 23:16:04 +00:00
f522bda243
Convert the hp300 LANCE driver to use bus.h
1998-01-11 21:57:02 +00:00
5021043b13
ia->ia_addr is of type `bus_addr_t'.
1998-01-11 21:56:13 +00:00
582d47fcf0
ia->ia_addr is a physical address, not a kernel virtual address.
1998-01-11 21:55:08 +00:00
1687835b3e
Pass down bus space tags to children, and use types appropriate for
...
bus.h.
1998-01-11 21:53:04 +00:00
774d66001e
Add bus_space.c
1998-01-11 21:42:44 +00:00
77706becd7
Initial implementation of bus_space functions for hp300. Some cleanup
...
of this will be possible once some pmap changes are made.
1998-01-11 21:40:52 +00:00
b69358e4ca
bus.h for the hp300 port. Only supports bus_space for now.
1998-01-11 21:26:04 +00:00
aceff90d16
add yet another PCI brige -- from pr 4780 from Nathan J. Williams
1998-01-10 01:15:14 +00:00
83ef3d4928
Switch off CPU-PCI write posting for the Saturn chipset; it is known
...
to cause problems with PCI busmasters.
1998-01-09 22:34:58 +00:00
6f57e5c573
multiple include protect machine/limits.h, fixes pr 4473 (from Mika Nystrom)
1998-01-09 22:23:44 +00:00
1256fac296
Rearrange alpha_init() somewhat, setting the page size much earlier, and
...
keeping track of where the kernel lives in K0SEG. Place early data
structure allocation into an allocsys() function, like other ports, so
that it can be used to first calculate the amount of memory needed
for those data structures.
1998-01-09 21:34:47 +00:00
59ea23516a
Increase delays to the required 7us.
1998-01-09 21:28:32 +00:00
bb4988dca2
If MACHINE_NEW_NONCONTIG is defined, activate the pmap_steal_memory()
...
interface.
1998-01-09 19:13:09 +00:00
408be2261c
Compile in BOOTP support for diskless boot.
1998-01-09 17:25:30 +00:00
35718a7622
Use of BOOTP or BOOTPARAM can be conntrolled by config option now.
1998-01-09 17:21:10 +00:00
9c3e23d351
Compile in BOOTP support for diskless boot.
1998-01-09 17:10:16 +00:00
874db3d0e0
Selection of network configuration method for diskless boot can be
...
controlled by config options now. Remove setting of nfs_boot_rfc951,
it is set by default if "option NFS_BOOT_BOOTP" is defined.
1998-01-09 17:06:35 +00:00
6757ab1b65
Remove conditional setting of "nfs_boot_rfc951" (introduced in previous
...
change). It's not needed anymore.
1998-01-09 16:01:27 +00:00
5b055c9032
enable diskless boot with BOOTP and BOOTPARAM configuration
1998-01-09 15:18:50 +00:00
e47378c640
- pmap_collect_pv() is broken; #ifdef it out (it's not currently ever
...
called anyway, but now at least the reason is documented).
- rearrange a few things to make it easier to add support for non-contigous
physical memory.
1998-01-09 08:27:09 +00:00
b115c27722
Get rid of some old cruft.
1998-01-09 08:18:22 +00:00
867cdfc734
Another update from John: if we're polling, e.g. in ddb, pass the
...
keystroke to the upper half directly.
1998-01-09 06:59:29 +00:00
4deb927ee6
Regen.
1998-01-09 06:59:27 +00:00
2f3e61a54a
Put RCS IDs into generated files, in the correct place.
1998-01-09 06:59:10 +00:00
e41a79ff38
Regen.
1998-01-09 06:58:04 +00:00
bd5df8e610
Put RCS IDs into generated files, in the correct place.
1998-01-09 06:57:44 +00:00
5170264d4e
Gather pv_table and pmap_attributes things togther, and macro'ize
...
access to them a little better.
Also, improve the performance of pmap_is_{referenced,modified}() and
pmap_clear_{reference,modify}() somewhat.
1998-01-09 06:54:17 +00:00
14807c2914
Use avail_start/avail_end.
1998-01-09 06:37:04 +00:00
f9b6954f55
Call vm_set_page_size() after initializing PAGE_SIZE.
1998-01-09 06:35:17 +00:00
aa39c43bc9
call vm_set_page_size().
1998-01-09 04:37:56 +00:00
85d56961e5
Update a comment relative to the vm_bootstrap_steal_memory() change, and
...
don't include pmap_free_pages() or pmap_next_page() in the new non-contig
case.
1998-01-08 23:48:16 +00:00
4cb36c3346
Update a comment to reflect the vm_bootstrap_steal_memory() change, and
...
while I'm here, note which two functions will no longer exist when
new non-contig code is done for this pmap.
1998-01-08 23:47:07 +00:00
c599e7d439
add new version of non contiguous memory code, written by chuck cranor,
...
called "MACHINE_NEW_NONCONGIG". this is required for UVM, the new VM
system (also written by chuck) that is coming soon. adds new functions:
vm_page_physload() -- tell the VM system about an area of memory.
vm_physseg_find() -- returns index in vm_physmem array that this
address is in.
and several new versions of old functions/macros defined in vm_page.h.
this is the sparc portion.
1998-01-08 11:39:30 +00:00
0876a69653
some KNF.
1998-01-08 11:03:13 +00:00
7069ab9961
don't call fb_unblank if NFB < 0
1998-01-08 10:56:36 +00:00
002fbe8721
do not use fb_unblank unless NFB > 0
1998-01-08 01:13:58 +00:00
db8d7d755a
Regen: Back out RCS ID related changes.
1998-01-08 01:05:10 +00:00
af0fb8a65a
Back out RCS ID related changes.
1998-01-08 01:04:44 +00:00
c4a3ed1697
Regen: Back out RCS ID related changes.
1998-01-08 01:02:05 +00:00
ddb3a0e478
Back out RCS ID related changes.
1998-01-08 01:01:27 +00:00
5d5c1cd59e
- avoid system stack underflow when calling sigreturn via trap #0
...
- make sure all sigreturn error conditions are reported to the caller,
instead of the place jumped to.
This is the bugfix part of pr 4628 by ITOH Yasufumi.
The performance optimization part will be handled seperately, after evaluating
its implications.
Testing on 68040 and removing the performance change from the proposed patch
by scottr. Half of the Amiga machdep.c change had to be done manually by me,
as the patchfile didn't apply cleanly.
XXX Yes, Amiga should be changed to use the common sig_machdep.c instead.
XXX Really soon now. I promise.
1998-01-07 22:46:00 +00:00
4567c69fea
Update from John Wittkoski: the Color Classic and Color Classic II
...
have Cuda hardware, not IIsi-based.
1998-01-07 07:33:36 +00:00
d002f566b3
Support 68060 (and, for the Amiga, even 68040 buserr frames) in the sendsig()
...
and, indirectly, sigreturn() functions.
XXX The Amiga should be switched to using sig_machdep.c instead.
1998-01-06 20:50:22 +00:00
6ac24f05df
Garbage-collect VM_PMAP.
1998-01-06 08:46:11 +00:00
2317f9064e
Garbage-collect pm_stchanged.
1998-01-06 08:40:50 +00:00
0e5cf40b1f
Always include pmap_pinit(), since it is a defined pmap interface
...
function (thought, we might revisit that later). Just call pmap_pinit()
in pmap_create(), instead of inlining what pmap_pinit() does.
Also, g/c a TAILQ_FIRST() macro that is now defined in <sys/queue.h>
1998-01-06 08:27:05 +00:00
a26db50632
Don't need __VM_PMAP_HACK anymore.
1998-01-06 08:14:14 +00:00
4044eccd3f
Don't use vm_pmap; use vm_map.pmap instead.
1998-01-06 08:13:08 +00:00
c2768af3d4
Garbage-collect cpu_set_init_frame(); it hasn't been needed for some time
...
now.
1998-01-06 08:06:45 +00:00
07f835de1f
Garbage-collect PMAP_ACTIVATE() call here; it's no longer necessary.
1998-01-06 07:49:36 +00:00
3e7eb6c80a
Garbage-collect pm_pdchanged; it's not used by anything.
1998-01-06 07:16:06 +00:00
61567b54de
Garbage-collect pm_stchanged; it's not used by anything.
1998-01-06 07:02:58 +00:00
d11b109f2b
Garbage-collect use of the PCB's copy of the user segment table pointer.
1998-01-06 06:51:40 +00:00
ab9b250a37
The user segment table pointer is no longer kept here. Change it to
...
a spare field.
XXX Should be changed to use generic m68k PCB!
1998-01-06 06:47:04 +00:00
8cbc5caabb
The user segment table pointer is no longer kept here. Change it to
...
a spare field.
1998-01-06 06:46:05 +00:00
2ec6474b31
RCSID Police.
1998-01-06 04:44:59 +00:00
fe87ac4104
fix for changes in bioscall structure and include files
1998-01-06 00:35:42 +00:00
a8f80ad4fd
Fix a bogosity apparently inherited from when the Utah 4.3BSD code base
...
was converted to use Mach VM for Net2/4.4BSD. The user segment table
pointer was originally stored in the PCB. When Mach VM came along,
however, it was also stored in the pmap, and loaded into the PCB in
pmap_activate(). pmap_activate() would then note that the PCB's USTP
was now in sync with the pmap's USTP, and the low-level context switch
code would use the value from the PCB.
However, pmap_activate() would also load the hardware MMU context if
the pmap was the current pmap (or, in the case where pmaps can be shared,
such as in NetBSD, if the proc was the current proc). The low-level
context switch code would then reload the hardware _again_ using the
USTP from the PCB.
However, the optimization of not calling pmap_activate() if "stchanged"
was false ended up causing some processes to use stale USTP values from
the PCB when the low-level context switch code reloaded the hardware!
This was noticed by using a real vfork(2) (which worked for some time
before failing, surprisingly!)
Since I'm hard pressed to find any real optimization here (since the
hardware was always reloaded once, sometimes twice!), the code now always
calls pmap_activate(), which uses the correct USTP value (the one in the
pmap). The PCB's USTP is now ignored, and should eventually be g/c'd.
Another optimization can actually be performed, and I have added a comment
describing what it is, but have not yet implemented it.
Also note that most of the loadustp() functions where actually incomplete.
This has been corrected. These functions should probably be split up into
MMU-specific operations, and called indirectly, rather than doing constant
run-time decision making based on values that will never change during the
course of a boot's lifetime.
1998-01-05 23:16:21 +00:00
3625dbcd48
RCSID Police.
1998-01-05 21:34:56 +00:00
5646f55116
make script insert RCS ids into generated files
1998-01-05 21:28:21 +00:00
086015d681
RCSID Police.
1998-01-05 21:13:51 +00:00
e464358f5f
make script insert RCS ids into generated files
1998-01-05 21:12:34 +00:00
49ad493e50
RCSID Police.
1998-01-05 21:11:15 +00:00
489c2f7e06
make script insert RCS ids into generated files
1998-01-05 21:10:18 +00:00
b46484bb8a
RCSID Police.
1998-01-05 20:51:25 +00:00
015e898c02
RCSID Police.
1998-01-05 07:02:46 +00:00
3e0fad1868
RCSID Police.
1998-01-05 06:28:44 +00:00
e13ab577cd
RCSID Police.
1998-01-05 05:05:49 +00:00
b9f1b716f3
Now that all ports have pmap_activate(), and it has an identical interface,
...
prototype it in <vm/pmap.h>
1998-01-03 01:12:59 +00:00
b73f9750f6
Don't allocate PTEs in cpu_fork(); they were allocated when the new
...
process's pmap was created. Instead, use pmap_activate() to load the
page {0,1} base and length registers into the PCB for the hardware's use.
1998-01-03 00:37:31 +00:00
aa58d4ac6b
Adjust for the fact that the page {0,1} base and length registers are now
...
stored in the pmap structure.
1998-01-03 00:35:28 +00:00
f267fe868d
- Adjust so that access to the PCB is not required in most pmap functions.
...
Store the page {0,1} base and length registers in the pmap structure,
and implement pmap_activate(), which stores them in the PCB (for the
hardware's use).
- Re-implement pmap_pinit(); allocate the PTEs here, not in cpu_fork().
1998-01-03 00:34:02 +00:00
172a9381b6
- Remove the PCB pointer from the pmap structure. Instead, store the
...
page {0,1} base and length registers in the pmap structure. They will
be loaded in to the PCB when the process's address space is activated
by way of pmap_activate().
- Remove pmap_pinit() macro; it's now a real function.
- Prototypes for pmap_pinit(), pmap_activate(), pmap_deactivate().
1998-01-03 00:28:43 +00:00
d8076f896b
Grab the PCB directly from the u-area, not by indirecting through VM
...
structures.
1998-01-03 00:23:53 +00:00
9ca174a51d
Implement pmap_activate().
1998-01-02 22:57:56 +00:00
a6f228e498
Make pmap_activate() take a struct proc *.
1998-01-02 22:36:33 +00:00
c162e92a71
Implement pmap_activate().
1998-01-02 22:17:18 +00:00
f39e44955b
Make pmap_activate() take a proc *.
1998-01-02 20:37:28 +00:00
d14e18faa9
Make pmap_activate() take a proc *.
1998-01-02 20:10:26 +00:00
5680284286
Fix problem in copy*str() when not emulating locc.
1998-01-02 19:33:27 +00:00
dd966fca05
Change an argument name to PMAP_ACTIVATE() to more accurately describe the
...
semantics of the argument.
1998-01-01 20:05:23 +00:00
287b63b321
- Make pmap_activate() and pmap_deactivate() take a struct proc *.
...
- Define active_user_pmap() and use it in the appropriate places (from hp300
port).
1998-01-01 19:52:50 +00:00
733dae35bc
use ${SIZE} instead of "size" (somehow this one got missed)
1998-01-01 08:11:41 +00:00
8b5e0b6e06
Remove a couple of unneeded VM-related headers.
1997-12-31 19:32:55 +00:00
89951259ed
Add kernfs; remove more stuff we don't need.
1997-12-31 16:44:37 +00:00
9c20093835
Make pmap_activate() and pmap_deactivate() take a struct proc *.
1997-12-31 10:12:55 +00:00
fa1347ed5b
Prompt for total sectors, and calculate sane defaults for sectors per
...
cylinder and total sectors.
1997-12-29 07:15:10 +00:00
89b10b928f
Do better reporting of transmit errors.
1997-12-26 22:37:05 +00:00
ac86463ce3
Make compile without options MACHINE_NONCONTIG.
1997-12-24 17:48:10 +00:00
49779c8c5a
Add MDP_STACKADJ.
1997-12-24 17:46:08 +00:00
89e7595756
Exclude /dev/fb code if no framebuffer is compiled into the system.
...
Adds a fb.h flag file with '#define NFB 1' if any such card is configured
in to the kernel.
1997-12-23 23:57:20 +00:00
ff7a4d0472
Add COMPAT_13.
1997-12-22 05:31:23 +00:00
3550b22654
Commit patch for PMAG-A (mfb) pixel inversion accientally left out of 1.3.
...
See PR# port-pmax/4724.
1997-12-22 02:39:28 +00:00
6563f769af
update for correct SPU type and COMPAT_13.
1997-12-21 17:15:01 +00:00
589a5e2c79
patch from is -- I don't know what it does, but he says it's critical.
1997-12-20 21:13:13 +00:00
bf8e38df4f
Establish the interrupt handlers on sun4 `oclocks'; pointed out
...
by Chuck Cranor.
1997-12-19 22:53:10 +00:00
6a7a3fb133
spurintr() is a low-level interrupt handler, and must not
...
be called by C code! Spotted by Bill Studenmund, who also provided
#the substance of this change.
1997-12-19 05:38:00 +00:00
964a147839
Clean vers.c & vers.o.
1997-12-18 21:03:58 +00:00
61475326e0
Add delays for lame keyboard controllers, as in the keyboard driver. Do a
...
better job of flushing input in various cases.
1997-12-18 16:49:10 +00:00
73a2fb9659
support simple stack trace.
1997-12-18 09:09:01 +00:00
e2f98dba9e
remove avail_end temporarily for compile.
1997-12-18 09:08:35 +00:00
15dd19ea29
use pmap.c of port-powerpc.
...
mem_regions support.
1997-12-18 09:07:58 +00:00
e43a4bda4a
Update for the NWO
1997-12-18 06:45:30 +00:00
0b62536fdf
Make these more closely resemble the old configurations.
1997-12-18 06:44:15 +00:00
3adf82c90e
Grok boot partition argument delimited by a colon. Force RB_ASKNAME
...
when partition argument is present.
1997-12-17 21:33:10 +00:00
c0ba23773d
Always write primary bootstrap code to raw partition, even when the
...
secondary bootstrap is on partition >= b.
1997-12-17 21:30:23 +00:00
ea634df03a
Workaround for bug in 147Bug PROM (my version, 2.2, at least) which
...
prevents booting from tape in the obvious way.
1997-12-17 21:28:02 +00:00
4b78217d87
Conf file suitable for the ramdisk installation kernel.
1997-12-17 21:24:11 +00:00
f7b8b2dc36
Add file-system KERNFS for the benefit of miniroot install.
1997-12-17 21:20:06 +00:00
070bd37c1b
Pad out table manager structures so that all the members in the contiguous
...
table manager array allocated in pmap_startup() are properly aligned for
faster bus access.
1997-12-17 16:20:33 +00:00
feb6e077d4
do not incread vm_kmem_size that radically for 1GB or better machines
1997-12-16 21:59:41 +00:00
24d2f8120e
Don't enable interrupts unless we are using reselect or interrupt-
...
driven PDMA modes.
1997-12-16 19:44:19 +00:00
5a67b7c680
Add initialization code for cs_wr5_dtr as the M.I. layer now tests
...
it in initializing during autoconfig. Similar to sys/arch/sun3/dev/zs.c
revision 1.47. Ought to fix hangs at first tty access reported by
Johnny Lam, <jlbg+@andrew.cmu.edu>.
1997-12-16 17:53:12 +00:00
cebc1537c1
Update to match std.mac68k changes.
1997-12-16 17:22:53 +00:00
718221a852
fix format string in FD_DEBUG printf(); from Eric Haszlakiewicz in PR 4692
1997-12-16 07:35:45 +00:00
a5252fc287
Fill out more file system information, from Havard Eidnes, and hacked a bit
...
by me.
1997-12-15 23:17:19 +00:00
4702594559
Correct size of brwrite():trbuf[] (Mellon).
1997-12-15 09:21:04 +00:00
c594d764bc
support IDE hard disk controllers (wdc) and drives (wd)
...
put wdc.c into bebox/isa directory temporarily
1997-12-15 08:00:22 +00:00
be7fd676e5
Sync with GENERIC
1997-12-13 00:26:08 +00:00
ebbce0eb18
Need MEMORY_DISK_IS_ROOT now also.
...
Sync with GENERIC
1997-12-13 00:25:15 +00:00
4f0a44847d
Move Sun3/E stuff
1997-12-13 00:23:45 +00:00
6be94f263f
obsolete
1997-12-13 00:21:01 +00:00
caa702438d
add bus_space_{read,write}_multi_N macros
...
some fix.
1997-12-12 03:08:28 +00:00
4a0b2d1b52
fix wrong variable declaration
1997-12-11 09:31:00 +00:00
cddd6a97bc
add ins/outs macros
1997-12-11 09:23:54 +00:00
8bdb67652b
change order of interrupt description bit
1997-12-11 09:04:23 +00:00
9e087acb89
Code for software-assisted DDB single-stepping from Chuck Silvers.
1997-12-10 23:12:13 +00:00
f0faff5a2f
sync with /sys/arch/i386/i386/md_root.c.
1997-12-10 21:56:30 +00:00
071a27d737
add MEMORY_DISK_IS_ROOT to use the memory disk and not the boot device
...
as the rootdevice.
1997-12-10 21:51:14 +00:00
fbe83dc02d
Install "pcvt_ioctl.h" by normal "make includes".
1997-12-10 14:14:21 +00:00
18d2ccf637
Add '-H' option for writing High density floppies.
1997-12-10 09:32:35 +00:00
b60acd2843
fix to get the right irq
1997-12-09 23:33:17 +00:00
e0170ea83c
Remove local definition of DEBUG (left there by accident).
1997-12-09 22:29:01 +00:00
1e1b53cba9
The ie_reset function needs to turn off loopback mode.
...
(Remember the TDR complaint: short X clocks away?
that was because the chip was in looback mode! 8)
1997-12-09 22:25:42 +00:00
a7d1d15c39
KMEMSTATS is documented in options(4) as being a possible severe
...
performance hit, and on an 80386 processor, it most certainly is. Pull it
from the GENERIC (and DISKLESS "generic") kernels--configure it in
yourself if you actually need it.
1997-12-09 13:32:32 +00:00
2e40be26b8
The ie_reset function needs to turn off loopback mode.
...
(Remember the TDR complaint: short X clocks away?
that was because the chip was in looback mode! 8)
1997-12-08 21:49:50 +00:00
ec9abe23be
Several fixes. This version actually works!
1997-12-08 19:22:52 +00:00
1a340a5921
Fix missing newline in attach
1997-12-08 19:19:25 +00:00
c497f2ca2b
Define the interrupt vector registers as 16-bit fields as
...
shown in the documentation. (Thanks to Michael Thompson)
1997-12-08 19:17:12 +00:00
b27ebeeac1
Work-around the situation where the buffer cache is larger than
...
16M, thus eating up all candidate bounce pages, which are not allocated
until autoconfiguration runs, by deferring allocation of the buffer
cache pages until after autoconfiguration has run.
XXX This is safe because the i386 port doesn't read any disklabels
XXX during autoconfiguration.
1997-12-08 05:07:29 +00:00
be205fedc0
Define constants for the start and end VA of user page tables.
1997-12-07 21:30:11 +00:00
4357e617d2
When getting a pagefault for a PT page, wire it. Normally we fault them in
...
ourselves, but this can still happen on a 386 in copyout & friends.
Fixes pmap_changebit panics seen on 386s. Thanks to Juergen Hannken-Illjes
for providing detailed info on bug occurances.
1997-12-07 21:28:56 +00:00
39aac67f16
Fix prototypes so that we can compile without DDB. Closes
...
PR 4633.
1997-12-07 17:47:47 +00:00
d25c266af2
Use malloc()/free() for the temporary buffer, not geteblk()/brelse().
1997-12-07 16:06:21 +00:00
6e39ad36a6
In pccngetc(), don't treat cn_tab->cn_dev as a valid device number until
...
it's initialized.
1997-12-07 06:20:44 +00:00
ea4e9ca4f6
Doh! 'avail_end' is a physical offset, not a page number!
1997-12-06 20:29:59 +00:00
ee70fa750a
Shades of rev 1.13: Really, we shouldn't call Debugger() if we
...
haven't got ddb in the kernel. Fixes PR 4632.
1997-12-06 19:41:46 +00:00
cc997082a5
Someone forgot to update db_tlbdump_cmd() when adding the printf routine
...
to the TLB dump routines arguements. Machines would die horibbly when
trying to dump the TLB entries in DDB. Also don't explicitly "page" the
output, since db_printf takes care of that.
1997-12-06 19:19:07 +00:00
73a00edbd6
PR 4078: Enabling the SCSI IRQ interrupt to allow reselects to work
...
causes the MI interrupt handler to barf when we get a 5380 RST interrupt
while probing. Worse, the VIA latches the interrupt, so simply having
all interrupts disabled during autoconfig doesn't resolve the problem.
[I demonstrated the latter on a IIci, which erroneously reports a
reselection attempt(!) after autoconfig is complete. The latched
interrupt results from the SCSI bus reset we do when initializing the
bus.]
Since interrupts must be enabled during autoconfig anyway (sigh), test
to see if autoconfig has completed in sbc_irq_intr(). If not, we don't
pass the interrupt up to the MI interrupt handler. Also, make sure to
clear the VIA interrupt if we're servicing an unclaimed 5380 RST
interrupt.
Thanks to Bill Studenmund for providing the key insight needed to unlock
this problem.
1997-12-06 18:53:30 +00:00
d76941843e
fix mixer code that was clearly untested:
...
- allow get/set of enums SUNAUDIO_SOURCE and SUNAUDIO_OUTPUT rather
than returning EINVAL
- add missing SUNAUDIO_MONITOR_CLASS case in query_devinfo
- convert SUNAUDIO_MONITOR case from a MIXER_CLASS to a MIXER_VALUE
like it is supposed to be
- the labels for outputs/record class were swapped: fix it
this patch allows "mixerctl" to work properly on a sparc
1997-12-06 03:20:56 +00:00
0a558b3f1f
Standardize COMPAT_SUNOS -- remove all references to
...
sunos_exec_aout_makecmds() in machdep.c for various architectures and put
it in exec_conf.c like the other emulations; rename exec.h to
sunos_exec.h.
1997-12-04 15:33:17 +00:00
9d09eab68e
Preserve the bootflags in the processor-type test (== make the loader
...
work again for the TT030).
1997-12-04 07:39:05 +00:00
40ef7dd007
handle case of no keyboard configured
1997-12-03 22:32:05 +00:00
16b71d1871
Thanks to Paul Goyette <paul@whooppee.com> for a patch to clear the
...
interrupt properly on a SuperMac Spectrum/8 Series III, and thanks
to Dan McMahill for loaning the card to Paul.
I modified Paul's patch somewhat to change grfmv_intr_generic_{1,4}
to grfmv_intr_generic_write{1,4} and added grfmv_intr_generic_or4 to
handle this card.
1997-12-03 03:05:02 +00:00
d4ff9e0143
Remove the broken trap recursion check (#if DEBUG)
1997-12-02 23:41:30 +00:00
b3701f21ea
Kill some noise from -DDEBUG
1997-12-02 20:42:13 +00:00
7c95ede823
Kill some noise from -DDEBUG
1997-12-02 19:48:45 +00:00
52596506c7
Add NetBSD RCS Ids. Remove #if 0-#endif.
1997-12-02 01:20:30 +00:00
bb7bb0093d
Add COMPAT_13.
1997-12-01 16:33:39 +00:00
eefde8bdcd
Add COMPAT_13.
1997-12-01 16:31:29 +00:00
28e0cf0693
Add COMPAT_13.
1997-12-01 16:02:09 +00:00
c87631771e
Add COMPAT_13.
1997-12-01 14:52:51 +00:00
e9be44bb8d
add bus_space_subregion macro.
1997-12-01 07:11:34 +00:00
80f65cc8ed
use dev/isa/isa.c instead of bebox/isa/isa.c
1997-12-01 07:10:14 +00:00
38d8db93cf
cleanup disused extern declaration.
1997-12-01 07:01:52 +00:00
4be1bd1115
Correct a comment from previous commit.
1997-12-01 06:07:33 +00:00
355a8bbccd
We don't do old-style miniroots anymore.
1997-12-01 05:51:51 +00:00
fe3d2d5633
Make grfdebug a patchable variable, and default to no debugging messages.
...
Noticed by Hauke Fath.
1997-12-01 05:40:39 +00:00
b52361ff54
add missing COMPAT_13 that kleink putzed
1997-11-30 23:18:59 +00:00
343e078b95
Add extra FWB driver partition and Apple ATA driver partitions to the list
...
of partition type that we recognise and skip when filling the fake
disklabel.
1997-11-30 04:46:59 +00:00
8e1428e600
Support for the Lapis ProColorServer 8 PDS on the SE/30. This prevents
...
hangs when trying to use this video card in conjunction with an ethernet
card. Thanks to David Condon <david@apk.net> for information and testing.
1997-11-30 01:02:44 +00:00
4d03a7d4d0
Fix typo in bus_space_barrier definition. See PR 4488.
1997-11-28 00:33:53 +00:00
c9d1ca0df4
delay() is using calculated timing, so correct the delay during polled
...
SCSI wait to get a more accurate timeout.
1997-11-27 22:43:44 +00:00
d45f82208d
Add a cpu_setup() function to "struct cpu_nocpuid_nameclass" and
...
"struct cpu_cpuid_family", so that we can have a cpu_setup function per
known cpu type. For now use it only for cyrix 6x86 to enable suspend-on-halt
and implement cyrix's workaround to the "coma bug".
1997-11-27 11:53:45 +00:00
972dc0b4d6
remove/import software interrupt model and external interrupt handler
...
from OpenBSD/powerpc.
move bus_space_* from bus_machdep.c to bus.h.
1997-11-27 10:17:45 +00:00
b3de97c5c1
Revert I486_PCI_MEM_ENABLED change; it caused too many problems.
1997-11-27 10:10:50 +00:00
4ee07a6d65
Revert I486_PCI_MEM_ENABLED change, it caused too many problems.
1997-11-27 09:58:26 +00:00
771073b8ce
keep compile dir.
1997-11-27 09:48:18 +00:00
e908c01f7e
If not defining SUN4M, you still have to do something with has_iocache.
1997-11-26 22:11:53 +00:00
d4150bfec4
Do not include vm/lock.h. It does no longer exist.
1997-11-26 21:26:44 +00:00
9cc64880e9
Major reorganization, based largely on the i386 GENERIC. This moves all
...
bus and device configuration out of std.mac68k, as well.
1997-11-26 07:23:20 +00:00
805d1043a6
Don't attempt to open the ADB device if it hasn't been initialized.
...
Also, don't allow more than one instance to be configured.
1997-11-26 06:28:50 +00:00
2241e4220c
Only scan MAXPARTITIONS entries for a free partition table entry.
1997-11-26 04:18:20 +00:00
62ebaeb91b
Ignore FWB Component and Apple_Driver_ATA partition types, too.
1997-11-26 04:14:07 +00:00
549ecbd70a
make SCSIVERBOSE default
1997-11-26 03:13:53 +00:00
61f3754047
add SYSVMSG and SYSVSEM to GENERIC kernel
1997-11-26 03:13:12 +00:00
6c7f015fc8
The calculation of dumpsize was incorrect. It is the size of
...
the raw memory part of the dump (not including the headers).
1997-11-25 22:38:41 +00:00
952c244eab
In iteoff()/iteon(), don't try to do anything if we haven't
...
initialized the ite.
1997-11-25 20:56:13 +00:00
e85ad99e57
Add COMPAT_13.
1997-11-25 20:29:24 +00:00
387294d4a5
Fix dependency generation for assembler files; closes PR 4476,
...
but differently since the suggested change breaks cross compiling.
1997-11-25 18:33:19 +00:00
2412580d6a
Forgot a declaration in last change to esp.c.
1997-11-25 03:54:56 +00:00
2e64ccdb0b
Remove some outdated comments, fix others.
1997-11-24 22:09:58 +00:00
a8291dea54
Kill unnecessary arguments to pmap_enter_*
...
Do pa=PG_PA(pte) in pv_link/pv_unlink so it
does not need to happen in as many places.
1997-11-24 21:38:31 +00:00
a90ace971a
Workaround for the "xanim volume setting problem":
...
We play mono samples on all 4 channels.
However, we get the volume settings for mono samples as a symmetic two-channel
setting... the other two channels used to stay at max volume...
I believe that something else is wrong here, but dont want to change MI
code (which in turn influences a couple of MD driver) thus late in the release
cycle.
1997-11-24 21:00:50 +00:00
42526b0e75
On the 3/50 it is avail_start that must be less than hole_start,
...
not avail_end. Identified by Greg Oster <oster@cs.usask.ca>
1997-11-24 17:58:20 +00:00
5050531ac6
Do transfers with interrupts off.
1997-11-24 12:35:20 +00:00
2524b071e8
Add commented-out "I486_PCI_MEM_ENABLED" option, and describe it.
1997-11-24 00:21:48 +00:00
b6e3c093d8
defopt I486_PCI_MEM_ENABLED
1997-11-24 00:21:01 +00:00
46c5ad921d
Add a workaround for buggy i486 PCI chipsets that have trouble with
...
memory-mapped device access (manifested by an apparent wedging of the
PCI bus):
- If cpu_class == CPUCLASS_486, disable memory-mapped PCI device access,
leaving only i/o-mapped access enabled.
- Provide a patchable kernel variable (i486_pci_mem_enabled) and a kernel
option (I486_PCI_MEM_ENABLED) to re-enable it.
1997-11-24 00:20:32 +00:00
978a8b60db
Add SCSIVERBOSE
1997-11-23 23:40:45 +00:00
0fe37675f7
Ups, forget a 'i'.
1997-11-23 23:26:03 +00:00
66c2794142
Add _BSD_SUSECONDS_T_ and _BSD_USECONDS_T_; do some space vs. tab formatting
...
cleanup
1997-11-23 20:20:53 +00:00
1863572e04
Add a check for the DO key to enter ddb on the Personal DECstations.
1997-11-23 18:20:11 +00:00
4759b4c5ff
Re-do the `busdma' interface.
1997-11-23 16:31:28 +00:00
426330f919
eliminate declarations of global data in <sparc/cpu.h> and declare in
...
source files, reducing global symblol replication in .o kernel files
1997-11-22 03:13:56 +00:00
ae473044c7
Strengthen DIAGNOSTIC checks in pmap_enter_*
...
Further simplify protection converter (gone).
1997-11-21 22:13:20 +00:00
4f4912d825
If DDB is defined, and RBUF_FERR occurs on a serial console port, enter ddb.
...
Fixes PR 4173.
1997-11-21 17:26:29 +00:00
b0e8edf692
Minor simplifications.
1997-11-21 17:14:07 +00:00
315f8de9c2
add pseudo-device rnd, commented out
1997-11-20 08:11:14 +00:00
37d9430628
add ID for (brain-damaged) GUS PnP, and add comments describing what
...
hardware each ID describes.
1997-11-20 06:23:52 +00:00
cbf2f164ad
The pgtalloc() stuff is still not doing the right thing on non-MXCC
...
vikings... i don't know why. Install a work-around in setpgt4m(),
that is still lying about here.
1997-11-19 23:19:13 +00:00
b9746b3d00
splpmap() is again equivalent to splimp().
1997-11-19 23:05:49 +00:00
62f73256ff
Use intr_establish() to install the timer interrupt handlers.
1997-11-19 23:03:47 +00:00
de106f6489
1. Implement a trick from Chris Torek: if an unhandled interrupt occurs
...
during auto-configuration (`cold'), raise interrupt level to splhigh
and return, instead of reporting a stray interrupt.
2. In cpu_switch(), start running a newly selected proces at splclock()
instead of the saved IPL, allowing high-priority interrupts in
ctx_alloc() which can take many cycles to install a new context
(especially on the two-level sun4c MMU).
1997-11-19 22:59:05 +00:00
f0047e072f
Better definition of PA_IS_DEV, and use it two more places.
1997-11-19 19:28:10 +00:00
261191603a
copyright foo
1997-11-19 15:35:36 +00:00
1adbb93466
* Disable parity checking on all devices until we find a better way to
...
deal with cheap CD-ROMs and other devices that do not appear to have
any way to enable parity generation. In the future, it might be nice
to have this configurable on a per-device basis with back-to-back
parity errors automatically disabling parity for the device. That
would require some MI changes.
* Handle unaligned and odd-length transfers.
This could probably be handled better in the future.
1997-11-19 13:01:32 +00:00
0afda495f5
Do the Pentium bug fix differently. Put the IDT in a read-only page and check
...
for a write fault on the illegal instruction descriptor. Don't ask why this
works unless you have a strong stomach.
1997-11-19 11:11:22 +00:00
2311eecbad
Fix emulation, mostly from Dave Huang in PR 4482 (one tweak by me for CUU/CUD, and
...
one from him to correct a fencepost error in {reset,clear}_tabs()).
1997-11-19 07:00:03 +00:00
5ea276f19a
Correct handling of "physical address" values given to us by the
...
VM code, which may have low bits specifying device space!
1997-11-19 00:19:10 +00:00
44c123573b
Define PC_ADVANCE() to advance the PC around the break instruction only
...
if the break instruction is still there. This works around a problem with
the software single step in DDB not recognizing the temporary breakpoint
set to emulate the single step.
1997-11-18 21:13:17 +00:00
f027428995
Cursor is supposed to be turned on when unblanking the screen.
1997-11-18 20:16:28 +00:00
50be28153c
Change order of include files. See PR #4532 .
1997-11-18 12:40:31 +00:00
ee5628ee52
Add another PnP id.
1997-11-18 11:31:07 +00:00
760b87dd7c
Debugger() is called outside #ifdef DDB - fix.
...
remove simple monitor.
1997-11-18 03:09:09 +00:00
7cf15a500f
Boot loader changed addresses due to a size increase and a similar change
...
size in the boot floppy.
1997-11-18 01:19:21 +00:00
1c7a3c901e
Apply version of cursor for bt431 cursor chip on mfb:
...
Fix cursor sprite for X11 startup/exit:
* add cursor on/off functions.
* Default cursor state is off (for framebuffer console).
* Turn off cursor in each driver's xxxCursorInit() entrypoint.
* Turn on cursor at the end of each driver's xxxLoadCursor() entrypoint.
works with X11R5 servers shipped with NetBSD 1.3.
1997-11-17 11:44:50 +00:00
f56e6f631f
Add an i/o address for iy0 (from GENERIC)
1997-11-17 03:42:52 +00:00
9246032610
Put lc0 at i/o 0x320.
1997-11-17 03:39:42 +00:00
e8cb388f65
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file
...
* fix up use of 'options<SPACE><TAB>'
1997-11-17 01:58:31 +00:00
6c986561ee
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file
...
* fix up use of 'options<SPACE><TAB>'
1997-11-17 01:57:23 +00:00
711247adf8
Eliminate %: use from alpha/trap.c; the policy is to get rid of these
...
anyway. I _still_ have my doubts about the kprintf %: code, though.
1997-11-17 00:52:49 +00:00
9dcfc52387
Put in Jason's recommended fix for the null-curproc-in-pmap.old.c problem.
1997-11-17 00:11:22 +00:00
af27f4e9b5
PR/4506: Andreas Gustafsson: Finnish keyboard mapping for pccons.
1997-11-16 22:05:48 +00:00
0963ca7386
Minor change.
1997-11-16 12:31:00 +00:00
d7107be1c9
Fix a condition where we might keep interrupts blocked while servicing a soft
...
interrupt.
Fixes serial port silo overflow problems.
1997-11-16 12:30:00 +00:00
45ad7fb3e5
Fix cursor sprite for X11 startup/exit:
...
* add cursor on/off functions.
* Default cursor state is off (for framebuffer console).
* Turn off cursor in each driver's xxxCursorInit() entrypoint.
* Turn on cursor at the end of each driver's xxxLoadCursor() entrypoint.
works with X11R5 servers shipped with NetBSD 1.3.
1997-11-16 10:17:53 +00:00
2030b7b104
Turn off reseting and disabling the device by default.
...
Document the option to turn them back on.
1997-11-15 20:18:50 +00:00
639260ce32
Use DESTDIR consistently when constructing `boot.net'.
1997-11-15 14:29:36 +00:00
93b31159bf
When fixing up traps 1, 3 and 4, turn off the RF flag.
1997-11-15 04:47:30 +00:00
6250567ba0
Make INTO actually work right.
1997-11-14 12:30:06 +00:00
0c7ac6dc71
Initialize 3100 cursor to off, for rcons text mode.
...
(Minimal-distance fix for 1.3 release).
1997-11-14 02:01:22 +00:00
a5449ca17c
Back out read-side DELAY() in previous revision added on advice of
...
tech-kern. Reported by Sean Davidson to cause erroneous doubling of
keyboard input on a 5000/50 under load.
Increasing the DELAY() from 2 to 30 doesn't help. Remove it for the
1.3 release. May cause problems with low-speed serial input, but
console keyboards work properly.
1997-11-14 01:38:57 +00:00
ad4c422ef9
Oops. Somehow the code to actually config_find the BBC on A1200s wasn't
...
committed.
1997-11-13 23:03:10 +00:00
2516dd1548
int -> long in a structure.
1997-11-13 20:57:31 +00:00
940f8fcfd1
remove unneeded and conflicting prototype
1997-11-13 18:06:01 +00:00
86086729e7
if NARP -> if NARP > 0
1997-11-13 10:48:19 +00:00
8b485c5962
Add a missing #if NARP > 0 around arpintr(); and add a #include "arp.h"
...
for NARP. This is for the 'new' arp system.
1997-11-13 10:43:06 +00:00
df6d37534b
s/NETHER/NARP/ and s/ether.h/arp.h/ for the 'new' arp system.
1997-11-13 10:37:40 +00:00
b1c7e79679
Map NMI in user-level code to SIGBUS.
1997-11-13 10:13:46 +00:00
f946a9746d
Oops; previous logic was wrong.
1997-11-13 07:21:23 +00:00
da60005b96
Only do the Pentium trap fixup when we get a kernel mode page fault.
1997-11-13 05:31:04 +00:00
7984f5ce3a
The scsi command length was not being set in rz_command(), which caused
...
the SII driver to fail when trying to get the drive geometry.
Remove extraneous newline when printing out the disk geometry during device
probes.
1997-11-13 03:56:49 +00:00
4f8b60c6bb
Implement the BSDI kluge for the Pentium `hang'; leave the first 7 IDT
...
descriptors in an unmapped page, and patch up the trap information inside
the page fault handler if the faulting VA is inside the IDT.
1997-11-13 03:25:27 +00:00
6a310175c6
Some general cleanup:
...
* Call gdt_init() earlier on.
* Don't bother to check for TSS and LDT descriptors in verr_gdt().
* Nuke the sti special case for trace and breakpoint traps.
* Move some variable declarations into more appropriate locations.
1997-11-13 03:16:42 +00:00
ce4c770f88
Make sure CPP, AR, AS, and RANLIB are defined.
1997-11-12 23:11:50 +00:00
a421995756
Define LORDER, NM, and TSORT here, like we do the rest of the tools.
1997-11-12 22:25:31 +00:00
ff4f5f4528
If necessary, defer console output until TX interrupt handler runs.
1997-11-12 22:18:54 +00:00
a309481f34
Change load address to avoid cache-aliasing on machines with Harvard-style
...
cache implementations (notably the Hypersparcs).
1997-11-12 00:37:07 +00:00
b80ad6c934
-point to console(4) manpage for serial console parameters
...
(suggested by Chuck Cranor)
-insert a reasonable IO base address for "iy at isa"
(from Ignatios Souvatzis)
1997-11-11 20:31:38 +00:00
d28cbedf2f
Fix typo in last change that causes lossage depending on
...
whether the MRG_ADB option is used or not.
1997-11-11 17:31:11 +00:00
c390c7a5e1
The address used by mips1_FlushICache() is a virtual address, not a physical
...
address. This caused DDB to hang the machine hard when trying to set a
breakpoint.
1997-11-11 16:50:57 +00:00
6fcc8cd8b1
Add locators for "eg0" device, and enable it.
1997-11-11 05:53:06 +00:00
9360bfcc81
Remove remnants from ISA com console attachment code, which caused, due
...
to missing variable initialization, a panic on the DraCo.
1997-11-10 22:29:03 +00:00
7b60c8ed11
Fix multivolume installation bug; PR#4454.
1997-11-10 22:14:16 +00:00
b0367937cb
Fix typo: NRASTERRCONSOLE -> NRASTERCONSOLE
1997-11-10 21:59:18 +00:00
85524f37b3
Set `dvma_cachealign' on Hypersparc.
1997-11-10 21:20:07 +00:00
479bc8877c
Protect userland applications from the inline splraise function.
1997-11-10 18:23:50 +00:00
ff1fd132f3
Forgot this yestereve: s/CV64CONSOLE/CV3DCONSOLE/
1997-11-10 12:17:20 +00:00
9dee06e184
Add px placebo driver to standard pmax options.
1997-11-10 08:26:33 +00:00
b9b9e9752b
Remove comment on bim.8 man page.
1997-11-10 01:58:10 +00:00
29bc127e91
Remove unknown .even, complete a string in a macro call.
1997-11-10 01:50:25 +00:00
f31e12d69d
- recognize CV3D in Zorro-II mode.
...
- use board address space > 4 MB, instead of iszthreepa(), to detect Z3-mode
boards. We dont want the bus, but want the address configuration.
- s/CV64CONSOLE/CV3DCONSOLE/
- s/cv3d_zorroIII == 1/cv3d_zorroIII/ and s/cv3d_zorroIII != 1/!cv3d_zorroIII/
1997-11-09 23:30:47 +00:00
a41bde2076
Get rid of MSGBUFPTECNT; fixes PR 4331.
1997-11-09 06:10:44 +00:00
c176a3646e
Fix kernel divide-by-zero errors and other bugs with removable devices:
...
* Add code to query CDs for size, from MI scsi cd.c. Use it on CDs.
* Set C partition size for CDs. 4.4bsd/pmax code only set `a' partition
size and required users to mount `a' partition, breking raw-device
access like "disklabel rz?".
* Avoid possible divide-by-zero call to howmany() from rzstart(),
on removable media that aren't ready at device-open time.
Verified to work on rrz42.
1997-11-09 03:08:23 +00:00
9e1d749da4
Initialize nfs_boot_rfc_951 to 1. Makes pmax kernels to use bootp,
...
not RARP/bootparams, to get diskless-boot config info.
Decstation PROMs already use BOOTP so we lose nothing.
1997-11-09 02:03:50 +00:00
60dd653baa
KNF: Fix some whitespace inconsistencies.
1997-11-08 23:22:38 +00:00
0f41aef4b9
Workaround for port-pmax/4438 (pmax kernel glass-tty console code is broken)
...
until a proper fix is available:
Perpetuate the 4.4bsd design even further. Change keyboard-driver
open routines to check for an active raster console. If active, set the
keyboard struct tty's t_winsize from the rcons t_winsize on first open.
See pr 4438 for remaining problems and discussion of a complete fix.
1997-11-08 21:55:05 +00:00
1dfe80f178
Add MODE SENSE code from MI scsi sd.c to rz.c.
...
* add includes for sys/dev/scsipi headers.
* cut-and-paste mode_sense and disk-geometry sense code from sd.c,
with name changes sd -> rz.
* Write `rz_command()' to send SCSI sense commands based on
existing rz size-sensing code.
* get geometry info with page 4 and page 5 mode sense.
* use resulting geom info for default label, fake label, and when
using ultrix labels. (ultrix labels have no geometry info).
Fixes incrrect-label bugs with using sysinst to install onto
Ultrix-labelled disks.
1997-11-08 11:28:10 +00:00
fbac6ffd1b
Delete ancient warning printf() from when this code hadn't been
...
tested on 3MIN or MAXINE motherboards. Add __KERNEL_RSID while we're here.
1997-11-08 07:15:35 +00:00
5eda2e37e8
Oops...(pasto)
1997-11-08 05:42:07 +00:00
527e5cbc44
Force the probe to find the internal video for the 63x/575 models.
1997-11-08 04:12:52 +00:00
924c57cce0
Disable DMA and interrupts for now (via se_options).
1997-11-07 22:11:19 +00:00
23e7d0a259
Adjust comment for new default fragment table size.
1997-11-07 17:01:45 +00:00
4ad496626c
Double default fragment table size. For fragmented and / or small
...
blocksize filesystems the old default was too small.
1997-11-07 16:59:41 +00:00
c1ed70f0d8
NetBSD RCSIds.
1997-11-07 13:31:15 +00:00
a6c6c9c1ad
Update from John Wittkoski: work around problem with mice that claim to
...
support Extended Mouse Protocol, but really don't; the Logitech Mouseman
is one such mouse (model M-AC13-4MD).
1997-11-07 07:38:10 +00:00
13fa4227b1
Update from John Wittkoski: bug fixes for Cuda support.
1997-11-07 07:33:11 +00:00
ae0af9300a
Fix a bug in irq_release() when searching interrupt list for the handler
...
to remove. The address of the pointer rather than the address of what
is pointed to was use to track the previous handler resulting in problems
when releasing a chained irq. (from John Ballance)
1997-11-07 01:04:51 +00:00
b2b71ad982
Added amps device (Atomwide Multi-Port Serial card).
1997-11-06 02:16:03 +00:00
012044674d
Add deice, attachment and file information for the Atomwide Multi-Port
...
Serial card.
1997-11-06 02:12:27 +00:00
4c86426324
Initial commit of the Atomwide Multi-Port Serial card driver. This driver
...
just provides attachments to the generic 16550 IC driver.
1997-11-06 02:08:51 +00:00
1a05b5daa4
Cleanup and simplify the padding at the start of the mbuf chain so that
...
the IP packet is word aligned using the ALIGN macro.
1997-11-06 01:55:18 +00:00
2b325ac968
Remove verbose printing when disabling interrupts on shutdown.
1997-11-06 01:52:43 +00:00
f5220ac842
MINIROOT_SIZE -> MINIROOTSIZE
...
Wildcard root device so that faked md device (MEMORY_DISK_IS_ROOT)
will be selected
1997-11-06 01:12:56 +00:00
4245860a87
MINIROOT_SIZE -> MINIROOTSIZE
...
Wildcard root device so that faked md device (MEMORY_DISK_IS_ROOT)
will be selected
1997-11-06 01:01:01 +00:00
da3b854a7d
Ignore memory disk hooks and boot args if MINIROOTSIZE is defined.
...
Added check for zero terminator after removing spaces in
get_bootconf_option(). This fixes a problem of matching NULL terminators
if there are trailing spaces in the boot args.
1997-11-06 00:57:02 +00:00
fe47853f6f
Use the soft copy of the cpu control register instead of trying to read
...
the cpu control register as this register is write only on some processors.
1997-11-06 00:51:02 +00:00
286f2f07bb
Keep a global soft copy of the cpu control register in cpuctrl as some
...
processors have write only control registers.
1997-11-06 00:43:41 +00:00
e22396f499
Clean up the messages displayed when either platform support is not
...
configured into the kernel, or when the platform is not supported.
Use the defopt'ed options, rather than NDEC_... and remove the needs-flag
hack that's existed for a while.
1997-11-06 00:41:45 +00:00
426af505f2
In cpufunc_control() only write to the cpu control register if the new
...
value is different from the old one.
1997-11-06 00:35:41 +00:00
204a7b293b
Sync ISA network device section with INSTALL.
1997-11-05 19:24:27 +00:00
51460546c8
Add sm0 at isa? port 0x300 irq 10
1997-11-05 18:13:10 +00:00
e38a307461
Recognize Apple Standard Keyboard (ISO layout)
1997-11-05 08:21:47 +00:00
224cfc2d71
Fix spacing of `not connected' message.
1997-11-05 05:45:00 +00:00
0b04d28454
Mark uses of long long with /* LONGLONG */ for lint. From
...
Chris Demetriou <cgd@pa.dec.com>.
1997-11-05 04:36:08 +00:00
cc1f5b65c9
asm -> __asm__
1997-11-05 04:23:35 +00:00
aefc208b70
asm -> __asm__, volatile -> __volatile
1997-11-05 04:19:04 +00:00
c7546c77a5
asm -> __asm__, inline -> __inline
1997-11-05 04:16:06 +00:00
53a8f81b2f
inline -> __inline
1997-11-05 04:13:24 +00:00
6e1637f157
asm volatile -> __asm__ __volatile
1997-11-05 04:05:00 +00:00
a15938129d
asm -> __asm__
1997-11-05 04:02:26 +00:00
b868a7c2ab
asm -> __asm__, volatile -> __volatile
1997-11-05 03:57:52 +00:00
023d8288ee
asm -> __asm__
1997-11-05 03:53:20 +00:00
fde9e5e6c3
A first cut at faster SCSI for non-AV quadras. Could probably perform better,
...
but is a marked improvement. This takes advantage of a pseudo-DMA hardware
hack of Apple's that exposes a 16-bit register that the Apple-designed
memory controller acts like a DMA controller and handshakes into or out
of the FIFO. Wierd.
1997-11-05 03:33:35 +00:00
6683847f3b
For the LC575/Q630 (comm-slot machines), try to derive the card settings.
...
Unfortunately, there does not seem to be a good way to determine what
variety of comm-slot card is present in a machine. There is still an
interrupt issue preventing these cards from working--hopefully that will
be ironed out shortly.
1997-11-05 03:27:29 +00:00
ba2ee23103
Small installation kernel for older machines; fits on 1.2M floppy but
...
doesn't support PCI or PCMCIA.
1997-11-05 03:25:52 +00:00
138956b074
For level 4 (serial) interrupts: If the handler returns 0, take the
...
normal rei course. If the handler returns non-zero, just rte.
This should allow better MACE response-time and still keep serial
interrupt overhead to a minimum on older, slower machines.
1997-11-05 03:23:20 +00:00
9daaf978aa
Check for machine class, not for PSCBase as initial check in mc_obio_match().
1997-11-05 01:56:27 +00:00
ffa392cb7e
asm volatile -> __asm__ __volatile
1997-11-05 00:38:37 +00:00
fdcd077928
asm -> __asm__
1997-11-05 00:34:15 +00:00
7a33a8aaef
Silence collisions
1997-11-05 00:02:51 +00:00
4730a8cbec
Bug fixes and cleanup from Chris Demetriou <cgd@pa.dec.com>:
...
- fix _C_LABEL so that it actually works.
- make __RENAME use _C_LABEL.
- fix __RENAME so that it expects an unquoted argument.
- fix __indr_reference and __warn_references so that they
supply their own final semicolon.
- define __warn_references to nothing if not GNU C (required
by the way it's used).
The __warn_references semicolon change has to be made
so that __warn_references can be defined into nothing.
(A ; all by itself isn't a great idea.) The __indr_reference
change was made for consistency.
1997-11-04 23:09:23 +00:00
8f6ac836dd
Move some interrupt routines out to assembler.
...
Optimize (slightly) pmap_clear_modify.
1997-11-04 22:59:20 +00:00
fb4298e98c
Optimized copy/fetch/store routines; rewritten in assembler.
1997-11-04 20:52:27 +00:00
cb6760281d
Raise the number of transmit and receive buffers.
1997-11-04 13:03:48 +00:00
2ed7cf086f
Fix a space-wasting bug found by David Huang in his work on the MACE driver.
1997-11-04 13:02:45 +00:00
9eb2a49d4b
Include copyright statement for the bus_dma implementation added in
...
the previous revision.
1997-11-04 10:37:37 +00:00
6f6bb84844
Check for null curproc in pmap_changebit. Fixes the IDE-on-alpha crash
...
problem reported by Chris Csanady <ccsanady@bob.scl.ameslab.gov>.
this
1997-11-04 07:16:25 +00:00
e19ba716d0
remove an obsolete comment.
1997-11-04 04:00:18 +00:00
81a98183d1
Puma will soon be looking a bit different.
1997-11-04 03:56:09 +00:00
e658b8b476
Add in the if_mc ethernet driver for the AMD "MACE" part. This is the
...
internal ethernet on the Quadra/Centris 660av/840av.
Add initial support for the PSC (DMA controller) to support the above
(DMA SCSI remains unsupported). This involved also changing the way
that several interrupts are handled.
Above from David Huang <khym@bga.com>
Since the interrupts changed somewhat, we must also make the ipls
dynamic, defaulting to their prior levels and adjusted for the AVs.
I modelled this on the hp300.
1997-11-04 03:44:42 +00:00
15339d7ea8
Make pmap_{,de}activate() take a pointer to a proc.
1997-11-04 01:37:01 +00:00
ea35849dac
More efficient implementations of:
...
pmap_protect_noctx()
pmap_remove_noctx()
1997-11-03 22:47:10 +00:00
81ed96b224
More reordering
1997-11-03 21:55:39 +00:00
4436625795
Delete "ed" driver, add "we".
1997-11-03 21:33:33 +00:00
fd48076569
Use genassym for the first time in vax port history. Rewrite cpu_exit,
...
cpu_switch, setrunqueue and remrunqueue in assembler for efficiency.
1997-11-03 20:00:17 +00:00
8539f2f3b9
../lib/exec_fromdos.c doesn't use the memory size returned by XMS check
...
anymore if other methods work better. Sync banner output with this.
1997-11-03 18:17:19 +00:00
90e33ee203
When using XMS, use the XMS size returned by the BIOS only if the other
...
methods to detect extended memory didn't work well.
(this XMS size is always too small, typically by 68k)
1997-11-03 18:06:22 +00:00
62a4f5b044
Use a private pool of PV elements. This improves performance,
...
and avoids reentrance into pmap code via malloc().
1997-11-03 16:58:05 +00:00
f106a637c6
Implement a "kernel-only" context for processes that have not
...
touched any user-space address recently. This is efficient
for things that stay in the kernel for a while, waking up
to handle some I/O then going back to sleep (i.e. nfsd).
If and when such a process returns to user-mode, it will
fault and be given a real context at that time.
This also makes context switch faster, because all we need
to do there for the MMU is slam the context register.
1997-11-03 16:08:23 +00:00
9e82e84056
Handle CDTRCTS, for silly Mac-like connector on some models (e.g. IPX).
1997-11-03 11:33:17 +00:00
5c7d3c3f2c
Back out last change, which was a thinko.
1997-11-03 11:10:41 +00:00
0ea4820367
--Add handcrafted stack frame directives to locore.s palcode vector
...
--entries / remove kernel entry from locore / reorganize vector entry
--code. Enables access to stack frames transitively w.r.t. palcode
--vectors, e.g. upward traceback works, inverting (possibly several)
--kernel vectors. Until now, all trackbacks ended at the first-reached
--instance of trap(), which was totally useless as there is no mystery
--to trap->panic->cpu_reboot
1997-11-03 04:22:00 +00:00
2d21148a91
Remove long-unused MD pmax console code.
1997-11-03 00:19:30 +00:00
2ee51585ba
Add ftwotox emulation, by using the fscale emulation routine (preload
...
destination register bit pattern with 1.0), which automatically provides
corner case handling.
Missing ftwotox emulation originally reported by Norman Mackenzie in PR 4237,
but he proposed a different implementation.
1997-11-02 22:02:46 +00:00
8dbb87fe86
Add bus_dma*() functions. Some functionality implemented in terms of
...
existing machinery (for now).
1997-11-02 21:31:34 +00:00
b74bcd140c
The sparc's bus.h.
1997-11-02 21:28:33 +00:00
ff83727926
All hail HAYDON!
1997-11-02 21:01:28 +00:00
7b80c0d8fa
make GENERIC more generic
1997-11-02 18:47:02 +00:00
4e254b7a82
Major rewriting, optimization and simplifying of the pmap code:
...
- Map in all physical memory first in system space. This reduces
pmap_copy_page() and pmap_zero_page to 3 resp. 2 instructions.
- Have fized position user page tables. Makes the pv_table smaller
and all reverse references faster (and simpler).
- Remove the wiring code. Nobody doesn't even know what a DR32 is anymore.
- Simulate page reference bit by setting page invalid, as suggested by
Rich Draves in a paper for 1991 Mach Usenix Symposium.
This reduced the time spent in the pmap module to between 70-75% of
the previous; and made process startup _much_ faster.
1997-11-02 14:25:26 +00:00
9b1a735c8f
Major rewriting, optimization and simplifying of the pmap code:
...
- Map in all physical memory first in system space. This reduces
pmap_copy_page() and pmap_zero_page to 3 resp. 2 instructions.
- Have fized position user page tables. Makes the pv_table smaller
and all reverse references faster (and simpler).
- Remove the wiring code. Nobody doesn't even know what a DR32 is anymore.
- Simulate page reference bit by setting page invalid, as suggested by
Rich Draves in a paper for 1991 Mach Usenix Symposium.
This reduced the time spent in the pmap module to between 70-75% of
the previous; and made process startup _much_ faster.
1997-11-02 14:25:24 +00:00
ae27edc757
Major rewriting, optimization and simplifying of the pmap code:
...
- Map in all physical memory first in system space. This reduces
pmap_copy_page() and pmap_zero_page to 3 resp. 2 instructions.
- Have fized position user page tables. Makes the pv_table smaller
and all reverse references faster (and simpler).
- Remove the wiring code. Nobody doesn't even know what a DR32 is anymore.
- Simulate page reference bit by setting page invalid, as suggested by
Rich Draves in a paper for 1991 Mach Usenix Symposium.
This reduced the time spent in the pmap module to between 70-75% of
the previous; and made process startup _much_ faster.
1997-11-02 14:25:19 +00:00
84f5dc2404
Fix clearing of redundant restart flag; CPU specific.
...
Also clean up a bit.
1997-11-02 14:07:07 +00:00
a8e1e83943
#include files must be in the correct order.
1997-11-02 14:01:07 +00:00
ec5fd4954e
Set rr0_dcd.
...
Don't set DCD_IE and CTS_IE here; let the MI code do it.
Handle MDMBUF.
1997-11-02 08:05:06 +00:00
395f27b052
Give the kernel pmap a soft copy of its segmap (like user pmaps)
...
so we can optimize away calls where pm_segmap[x] == SEGINV.
1997-11-02 05:16:25 +00:00
0270c30b3d
Change some debug prints to db_printf(), other minor stuff.
1997-11-02 03:19:18 +00:00
540caf5a8f
Add "ec" driver.
1997-11-02 01:02:23 +00:00
7438e6c882
Adjust for ifmedia-related changes to dp8390 driver.
1997-11-02 00:25:11 +00:00
56008e767b
Clean up spl* handling a bit (move some spl* calls up a level,
...
and have the callee do a CHECK_SPL for debugging).
Get rid of some private TAILQ_* macros.
some cosmetic stuff.
1997-11-01 23:56:25 +00:00
59498b56f8
From i386: initialize nfs_boot_rfc951 if either NFS_BOOT_BOOTP or
...
NFS_BOOT_DHCP are defined.
1997-11-01 21:11:07 +00:00
d0d3cc7965
Remove paragraph describing problem with initialising VMEbus RAM cards'
...
parity bits. Initialisation now handled during kernel startup.
1997-11-01 19:18:39 +00:00
cb8172bce4
Chnage MACHINE_NONCONTIG implementation such that the message buffer is
...
always located at the end of onboard RAM. This allows locore.s to zero
any offboard RAM to initialise the parity bit which most VMEbus RAM cards
have. Without this, many cards buserr on the first read access.
Thanks to Herb Peyerl for the idea.
1997-11-01 17:56:47 +00:00
3e8e744696
getopt returns -1 not EOF
1997-11-01 06:49:14 +00:00
ba6431afae
Incorporate a 4.4BSD-Lite workaround for a bug in cache invalidation.
...
From /sys/news3400/news3400/locore.s, with id
@(#)locore.s 8.3 (Berkeley) 9/23/93
Kazumasa Utashiro notes that the pmax cacheflush routines don't work:
#ifndef NOTDEF /* I don't know why Ralph's code doesn't work. KU:XXX */
It's because pmax hardware wries the COP0 bit to external branch
logic. news3400s don't, and so the bc0f loop fails. It will also
fail on some other models of pmax, but we dont' support them.
Surround the relevant framgents in locore_r200.S with "#ifdef pmax".
Longer-term, the cacheflush entry in the locore callback may have
to be a CPU baseboard-specific entry, not just CPU-version specific.
1997-11-01 06:34:07 +00:00
97128ca91e
Header magic is now done in stand/boot/Makefile.
1997-10-31 22:12:21 +00:00
b5d7e8f444
Install a version of the secondary boot block in /usr/mdec that is
...
suitable for use on a server for diskless booting. Done mostly to
simplify the installation notes and avoid questions ...
1997-10-31 22:05:17 +00:00
4dcb8c7d34
More movement.
1997-10-31 19:52:09 +00:00
bdf1b13477
-Don't try to parse the bootfile path in DOS mode.
...
-Take "dev" command from "biosboot" for consistency.
1997-10-31 18:50:09 +00:00
9870971b35
Format police.
1997-10-31 07:59:52 +00:00
f503ff3765
Move things aroun a little (group by purpose, etc.)
1997-10-31 03:04:42 +00:00
eca45d868a
Replace PMAP_LOCK/PMAP_UNLOCK with splimp/splx
1997-10-30 20:14:45 +00:00
84dcba44e2
Add missing `(void)' cast to big-endian variant of {NTOH,HTON}{L,S}().
1997-10-30 09:07:50 +00:00
328968b54e
Print out the real/avail memory like this:
...
real mem = 8192K (0x800000)
avail mem = 6392K (0x63e000)
1997-10-30 01:02:53 +00:00
ad4db27bc3
Move some variables from _startup.c into pmap.c (used only there).
...
Re-organize pmap_bootstrap, and shorten some function names.
1997-10-30 00:59:40 +00:00
173f7c3b37
Defopt PCIC_ISA_ALLOC_IOBASE, PCIC_ISA_ALLOC_IOSIZE, and
...
PCIC_ISA_INTR_ALLOC_MASK.
1997-10-29 22:50:46 +00:00
d2ec787a03
Remove the unsuported options COMPAT_HPUX.
...
Enable COMAPT_09 and COMPAT_10 for old binaries.
Enable the console options for the CyberVision 64/3D and fix a typo for
ite7.
1997-10-29 21:16:48 +00:00
af17ce204d
Remove unused old-config static variables describing TurboChannel slots.
...
From nisimura@itc.aist-nara.ac.jp in PR pmrt-pmax/4343.
1997-10-29 20:12:11 +00:00
6352bbdb7c
The Console driver works now.
...
Added some fixes for Zorro2 mode, but keep it still disabled.
1997-10-29 20:00:47 +00:00
de95bf8c30
Add pnp support for the OPTi Audio 16's joystick port.
1997-10-29 19:40:12 +00:00
1d338698d7
Flush tty input queue when going in and out of X mode, PR #4321 ,
...
Chris Demetriou.
1997-10-29 01:39:40 +00:00
d2016e2df0
Disable interrupts when frobbing the keyboard controller for A20, as
...
it may generate a reset on some (older) controllers. Introduce a delay
to make some kbd controllers happier.
1997-10-29 00:32:49 +00:00
38d61d7805
Left DEBUG there by accident. Remove it
1997-10-28 21:12:58 +00:00
923a3fcbff
Quiet down those "interrupt stuck?" messages.
1997-10-28 21:10:07 +00:00
a3be0335e3
Add prototypes for mcount and _mcoount.
1997-10-28 06:03:25 +00:00
c3feaf6bf5
Make splserial == spltty, for now. This should be revisited after the
...
release.
1997-10-27 22:13:25 +00:00
ec78310453
Catch "timeout" return of serial port read BIOS call.
1997-10-27 19:53:20 +00:00
64550a14f3
Pass status byte to caller too.
1997-10-27 19:51:18 +00:00
5298ea207d
struct msgbuf -> struct kern_msgbuf.
1997-10-27 03:02:51 +00:00
8d24ce6b91
Change Q630 type to class-Q2. It's quite similar to the P575.
1997-10-27 02:49:29 +00:00
32146049fa
Don't forget to account for scrollskip when computing the current row.
1997-10-27 01:37:33 +00:00
023044a749
Clean up printing of chipset revision/capabilities.
1997-10-27 01:08:42 +00:00
07db350668
Define __STRING and __CONCAT macros for assembly routines.
1997-10-27 00:28:09 +00:00
8df7358c90
Include asm.h instead of cdefs.h
1997-10-27 00:26:07 +00:00
2d11975bbd
Include <bsd.subdir.mk> to build SUBDIRS.
1997-10-27 00:24:54 +00:00
2793a8e02a
use CPPFLAGS instead of CFLAGS
1997-10-26 22:09:43 +00:00
a16fd7d74e
Make these compile after m68k/m68k.h 1.4->1.5.
1997-10-26 21:41:34 +00:00
2025270865
Fixes for sysinst and installing diskimage:
...
* Check for a disklabel matching the known values in an install diskimage.
If found, update incore disklabel's RAW_PART with the size reported
by the disk, clobbering the size used by vnd(4).*
* If geometry info is bogus or /missing, supply a fake geometry
(as in sd.c). Saves readdisklabel() and sysinst from divide-by-zero errors.
* lint: RAWPART -> RAW_PART.
1997-10-26 10:47:14 +00:00
64a7794048
<machine/intr.h> is required. Supply an empty one.
...
VS: ----------------------------------------------------------------------
1997-10-26 10:41:32 +00:00
7d0ee36fdb
The 16- and 32-bit Apple card types got reversed somehow.
1997-10-26 03:17:15 +00:00
b7321b3d4f
Handle interrupts on E-Machines Futura-SX. From Paul Goyette, PR 4348.
1997-10-25 23:17:58 +00:00
75e6c24f72
Don't turn off RZF_WLABEL flag on last close of raw partition.
...
It breaks disklabel -W, turning label writes back off again when
disklabel -W closes its open fd on the raw disk.
1997-10-25 22:28:52 +00:00
5770fa53f1
I had the memory map wrong for the SCSI/Ethernet board.
...
Fixes from Michael Thompson.
1997-10-25 18:20:09 +00:00
1182affa8f
I had the memory map wrong for the SCSI/Ethernet board.
...
Fixes from Michael Thompson.
1997-10-25 18:04:20 +00:00
611012d836
Make the copy_region methods do overlapping copies properly. Fixes
...
port-alpha/4216 (Chris Demetriou).
1997-10-25 01:21:57 +00:00
19c77efe96
In vga_erasecols(), fix botched count and reversed arguments to
...
bus_space_set_region_2(). From Chris Demetriou <cgd@pa.dec.com>.
1997-10-24 23:03:02 +00:00
5b2fd76fd3
Don't rely on fixed padding to longword align the buffer used for non-aligned
...
transfers - compute aligned address when interface is attached. Fixes PR#4258.
1997-10-24 01:50:03 +00:00
9bec32eefe
Check manufacturer and product codes correctly. The Blizzard 2060 driver
...
was trying to configure on a Cyberstorm MKI SCSI.
1997-10-24 01:43:49 +00:00
54770f54b4
Scan more than MAXPARTITIONS Mac partitions when loading the fake disklabel.
...
This allows us to use a root and/or user partition that's not one of the
first 8 partitions in the table, and it allows us to fill the fake disklabel.
1997-10-23 14:58:49 +00:00
e1adcbe609
Do not relocate the kernel to TT-Ram by default. Some TT's choke on this. You
...
can now opt for relocation by either setting the RELOC_KERNEL config option
or patching 'reloc_kernel' to something other than zero.
1997-10-23 11:26:19 +00:00
135737c189
fix some typos and other misfeatures in comments; no functional change
...
note that bha driver supports BT44x cards as well
1997-10-23 05:49:42 +00:00
9420004b46
Remove the for-loop that wants to map multiple msgbuf pages.
...
Multiple msgbuf pages will not work without a redesign of
the kernel VM layout, so let's not pretend we can do it.
1997-10-23 02:24:41 +00:00
1060564fdc
Make this generate the same output as kern/genassym.awk
1997-10-23 02:06:28 +00:00
737748a765
Generate assym.h into assym.h.tmp first, then move it. (safety)
...
Add a dependency for stub.o:Makefile
1997-10-23 01:39:20 +00:00
73e508c64a
Fix pr4316: doesn't build on 1.3..
1997-10-22 19:11:45 +00:00
a2594d0b33
Lost changes from 1.168 somewhere along the line.
1997-10-22 18:54:24 +00:00
c83f212654
Fix PR4316: pcvt busted in 1.3..
1997-10-22 18:24:30 +00:00
aa67eda78f
Correct zs_unit in zs_kgdb_init().
...
Similar problem as zs.c:consinit().
1997-10-22 17:03:35 +00:00
9053a6f401
Correct the values of zs_unit in consinit(),
...
so ddb will work on the keyboard/display.
1997-10-22 14:39:38 +00:00
c289655641
Make this compile again by including <vm/vm.h> and moving sysctl.h below
...
that include.
1997-10-22 08:04:07 +00:00
665f7d1a6e
Implement __RENAME() in <machine/cdefs.h>
1997-10-22 05:20:32 +00:00
49977a64e5
include <vm/vm.h> at proper points.
1997-10-22 03:40:17 +00:00
b34ae4f929
Get TRUE and FALSE defined again.
1997-10-22 03:35:56 +00:00
2476c3a858
Fix a warning
1997-10-21 22:14:08 +00:00
6eb98e720f
Finally nobble the last MACHINE_NONCONTIG gremlins. Needed to add
...
<machine/vmparam.h> to pmap.c and locore.s. Plus, genassym.sh needed
to have USRSTACK removed due to conflict with vmparam.h
1997-10-21 19:25:08 +00:00
5665df7a14
comments
1997-10-21 19:15:33 +00:00
0e5142a525
Move the (boiled down) interface declarations into m68k.h
...
Too late for the release, unfortunately...
1997-10-21 18:03:56 +00:00
10f5adfd00
Fix warnings on the sun3 caused by the fact that sun3/include/cpu.h
...
does not (and should not) declare stuff like getsfc(). Instead,
include <m68k/m68k.h> for those declarations.
1997-10-21 17:30:15 +00:00
9215c4253e
Declarations for things exported by sources in this directory.
...
(i.e. stuff that does not belong in <machine/cpu.h>)
1997-10-21 17:23:23 +00:00
6c04d467ec
Make l different from |.
...
Downgrades PR 1998 from software bug to change request.
1997-10-21 12:29:30 +00:00
d29eab51f1
Correct spelling of 'ThunderLAN'
1997-10-21 06:01:16 +00:00
ca99a37396
Enable ipfilter, and add a commented-out rnd pseudo-device line.
1997-10-20 22:52:48 +00:00
5ea9d818ae
Update for new location of i82365.c
1997-10-20 20:26:25 +00:00
1d1fd17f73
Don't panic if we fail to remap i/o or mem space in the attach function.
...
Instead, print a diagnostic and return. (Some drivers do this already.)
Also, normalize the diagnostic message, and fix some places where the
printfs were getting ugly.
1997-10-20 20:07:57 +00:00
75473a6379
we don't need FDESC
1997-10-20 20:03:04 +00:00
5bd8e6eccc
MSS3 needs full SYSV stuff.
1997-10-20 19:48:30 +00:00
4d29dd99dd
Put back duplicate <XXX>_ENDIAN definitions. Defining them as _<XXX>_ENDIAN
...
loses on non-POSIX source that re-defines <XXX>_ENDIAN itself (e.g., gdb.)
1997-10-20 19:15:40 +00:00
f29df68cd4
comment out rnd, mark as experimental
1997-10-20 18:47:08 +00:00
32b7029647
Mark options RND_COM as broken on i386 port
1997-10-20 18:45:09 +00:00
332129fdf1
Enable `reselect' and `synch negotiation' by default.
1997-10-20 18:05:21 +00:00
9d0579d2fb
Comment out pseudo-device rnd, mention options RND_COM, and mark experiemntal
1997-10-20 15:19:51 +00:00
e603ff5aa3
Fix vers.c dependency; PR#4090.
1997-10-20 11:54:26 +00:00
8e311daf58
Fix spelling of my name
1997-10-20 10:07:56 +00:00
a03a434f1b
* Use ANSI-clean names for host-specific byte-order definition
...
(_BYTE_ORDER, _BIG_ENDIAN, _LITTLE_ENDIAN).
Define old names from the ANSI ones if not _POSIX_SOURCE.
* Define _QUAD_HIGHWORD and _QUAD_LOWWORD properly when
_BYTE_ORDER == _BIG_ENDIAN.
1997-10-20 09:57:05 +00:00
0bb56df5a7
Fix spelling of my name
1997-10-20 09:54:50 +00:00
d41883c9ac
Fix typo in VM_MAX_ADDRESS.
1997-10-20 09:02:21 +00:00
8630149cba
Convert to MI 8530 SCC driver, from Bill Studenmund. The new front end
...
also supports DTR/CTS flow control.
1997-10-20 08:13:26 +00:00
b29ce8697c
Comment out PT_STEP for 1.3. Defining it causes gdb 4.16 to break.
...
(inferior debugee children die immediately with SIGTRAP.)
1997-10-20 07:29:23 +00:00
bf4f202e7c
Merge MINIROOT and NFSINSTALL into a single INSTALL config file,
...
with config lines for both root-on-disk and root-on-NFS.
1997-10-20 03:50:05 +00:00
8061da06c9
Add "options COMPAT_12".
1997-10-20 03:45:08 +00:00
83a4427110
Sync with GENERIC; comment out a few more unneeded things.
1997-10-20 03:42:43 +00:00
e0b89dfe15
Comment out aic driver to remove conflict with mi driver.
1997-10-20 03:19:16 +00:00
cd83f6a454
sys/sysctl.h depend on vm/vm.h
1997-10-20 02:46:20 +00:00
74f97b28cc
Change various constants that depend on the kernel VM base address. Lower
...
it to 0xf0000000 to give it more breathing space.
1997-10-20 00:45:03 +00:00
30c7fa3e36
Move kernel entry address down to f0100000
1997-10-20 00:43:21 +00:00
004f196dcf
Nuke 5.25 inch formats.
1997-10-19 23:29:47 +00:00
0ad10a1970
change name in comment from apmregs to bioscallregs
1997-10-19 22:59:50 +00:00
a0d6bae726
Add an odd-ball japanese floppy format (PR#2903).
...
A good time to get rid of the hard-coded floppy sector size.
1997-10-19 22:29:21 +00:00
04c45d466a
Define PT_STEP.
1997-10-19 21:49:50 +00:00
25d10d4369
zbus.c
1997-10-19 21:22:19 +00:00
ed413accab
Add PT_GETFPREGS, PT_SETFPREGS and process_{read,write}_fpregs.
1997-10-19 21:02:00 +00:00
efa4c7c48e
MSGBUFSIZE must be in CLBYTES, not NBPG. Also expand it to 4 * CLBYTES.
1997-10-19 20:48:47 +00:00
a6dfd800c9
Test device is configured in interrput handler.
1997-10-19 20:45:11 +00:00
3e2d17592a
add support for MK-HA2 Mach-2 SCSI host adaptor.
1997-10-19 20:41:02 +00:00
2260651129
Add match code to detect more than one SCSI adapter on 3100.
...
Provided by Bertram Barth.
1997-10-19 20:35:15 +00:00
7507e6a5e9
Make this compile again.
1997-10-19 20:34:54 +00:00
87b7a8ba91
Minor changes to make these more similar again.
1997-10-19 20:31:29 +00:00
838ebc1be2
Yet Another Massive Reorganization. I took the last reorg even
...
further. Devices are grouped by types and within the types segregated
by bus. Lots of comments fixed up, lots of nits cleaned. Extensive
comments from Jason and Charles incorporated.
We also really need an automatic way to generate INSTALL from GENERIC,
but that's a project for another day...
1997-10-19 20:14:21 +00:00
f08eca2b03
Add CyberVision 64/3D support.
1997-10-19 19:20:30 +00:00
3135cf9ecc
Use bus.h
1997-10-19 19:17:07 +00:00
7017046979
New unit number for the CyberVision 64/3D.
1997-10-19 19:08:00 +00:00
09b9eff341
Add an entry for the CyberVison 64/3D to the aconftab and to the
...
preconftab list.
1997-10-19 19:07:08 +00:00
29500b20c0
Make sure the i/o and/or mem addresses aren't wildcarded (i.e. -1) before
...
using the address in a bus_space_map() call.
1997-10-19 18:56:39 +00:00
c9252fa879
First version of the CyberVision 3D driver. This driver is based on
...
the CyberVision64 driver. Modified by Tobias Abt with some bugfixes
from Bernd Ernesti.
ZorroII is at the moment not supported and there is a small problem
with the Console driver where you just get a black screen, but the
system boots and you can use X11 without a problem.
1997-10-19 18:55:21 +00:00
mrg