e45a1fe921
Add wsvt25 termcap entry, and use it if BOOTMODEL=big. Sysinst now looks
...
nice in colour. From Grant Beattie <grant@netbsd.org>, with changes by me.
2002-06-24 17:36:27 +00:00
551a65be7c
add BUGS section (1 entry from bin/11244)
2002-06-24 17:28:07 +00:00
b2533a4c3e
Typo fix
2002-06-24 16:55:17 +00:00
e3b23eaafd
Switch from pccons to wscons, so that USB keyboards have a chance of
...
working. From Grant Beattie <grant@netbsd.org>, with changes by me.
2002-06-24 16:14:13 +00:00
603dca2ed2
sync whitespace w/ openbsd tree
2002-06-24 15:47:25 +00:00
bc7b65a647
don't lose information while we cast
2002-06-24 15:46:34 +00:00
7d6a7caf6a
Cast arguments so that this file will compile on less forgiving architectures
...
like arm32.
2002-06-24 15:32:58 +00:00
383ef0f9dc
make booting from FS_RAID work. tested on vs4000/90.
2002-06-24 14:53:16 +00:00
382230624e
s/${DISTDIR}/${DISTRIBDIR}/ as the former conflicts with pkgsrc.
...
add 1.6 support for vax cdrom's. other ports in NetBSD-1.6.mk are as in
1.6.mk and are probably wrong.
2002-06-24 14:49:15 +00:00
92912a1744
Actually inject the arp packet into softintr queue.
2002-06-24 12:00:49 +00:00
36f1c19838
Don't use a pointer before it is initialized.
2002-06-24 10:52:15 +00:00
9f911945d5
handle IDT-less case just as linux does
2002-06-24 10:10:17 +00:00
fe3778040b
tabify
2002-06-24 10:10:16 +00:00
241389f5d8
make it at least compile/link - copy change to i386/locore.s (1.255 -> 1.256)
...
not sure if it is correct
2002-06-24 10:05:54 +00:00
cc3f5791ea
Comments update: indicate which counters are being incremented.
2002-06-24 09:26:47 +00:00
0e8ea4f752
`fdcio_intrcnt.ev_count' is a 64-bit variable.
2002-06-24 09:24:37 +00:00
570a3e1f3d
set ar_hrd for RFC-defined cases
2002-06-24 08:42:33 +00:00
e03a874f74
set ia as well
2002-06-24 08:11:30 +00:00
0143dfc42f
integrate IEEE1394 ARP into generic ARP logic.
...
XXX there's no check at all in ar_hrd, and we don't set ar_hrd on outgoing.
it seems like a bad thing.
2002-06-24 08:06:20 +00:00
c474c560dd
do not consult routing table under the following condition:
...
- the destination is IPv4 multicast or 255.255.255.255, and
- outgoing interface is specified via socket option
this simplifies operation of routed
(no longer reqiure 224.0.0.0/4 to be set up)
2002-06-24 08:01:35 +00:00
afb66555e4
make vectors.o explicitly depend on assym.h, so that 'make depend' step
...
is optional
2002-06-24 07:15:24 +00:00
a53dc6ce7d
remove old and unused files
2002-06-24 06:49:14 +00:00
de7e3177b2
tidy up makefiles
2002-06-24 06:11:11 +00:00
184465092f
correct ftp relay functionality.
2002-06-24 06:03:13 +00:00
82659024b5
make sure to install ssh-keysign as setuid root
2002-06-24 05:52:29 +00:00
8e38e28f7f
White space nits: space after a comma.
2002-06-24 05:52:28 +00:00
3ea946f134
sync with openssh 3.3.
...
local mods included to make it compile with openssl 0.9.6d.
2002-06-24 05:48:24 +00:00
d4068eac65
Add 64MB and 256MB tlb page masks.
2002-06-24 05:46:47 +00:00
3dfc6702ef
clean ssh-keysign build dir before import.
2002-06-24 05:45:17 +00:00
9486e6fd01
it shouldn't be imported
2002-06-24 05:28:32 +00:00
b5222aff66
OpenSSH 3.3 as of June 24, 2002.
...
- ssh is no longer seruid root. ssh-keyscan is added to read secret host keys.
protocol version 1 rsh-like authentication is gone.
- FallBackToRsh is deprecated.
2002-06-24 05:25:39 +00:00
dd96b79d02
According to the Linux driver from Broadcom, only the 5700 B0 revision had
...
rx checksum problems. So only disable rx checksum for that revision.
2002-06-24 01:23:11 +00:00
4f75cebd06
Add a few revision definitions.
2002-06-24 01:21:39 +00:00
f427b80c27
Add ENTRY_NOPROFILE().
2002-06-24 01:13:34 +00:00
4ca3b72694
remove obsolete use of M_LINK0. it was planned to be used to identify
...
isosynchronous stream from others, but end up not being used.
From: Hayakawa Koichi <haya@ilink.sony.co.jp>
2002-06-24 00:42:27 +00:00
39cf9ef1f5
g/c last bit of old ipv6 prefix management.
2002-06-23 23:34:08 +00:00
f89b062ae7
During native signal delivery (and iBCS2, since it uses the native
...
sigcode), arrange to have the signal handler invoked directly, using
the trampoline only for the return path, saving a call insn. Play
some other stack trickery in the trampoline to turn 2 pushl's into
one movl.
2002-06-23 22:18:49 +00:00
5ac19a376b
Add finitef
2002-06-23 21:55:12 +00:00
7a0238324a
Add cosf/sinf.
2002-06-23 21:54:37 +00:00
471cb493ae
Add modff
2002-06-23 21:48:52 +00:00
307f36e80c
Note that times now uses sysconf(_SC_CLK_TCK) ticks, not CLK_TCK
...
ticks. Although the two are the same, SuS now says you use the former,
not the latter, to get the information. Also, fill in a little
information on just how awful this crusty wreck is.
2002-06-23 21:32:01 +00:00
4c0113def4
Swap the order of the sigcontext and hardware state in the sigframe.
2002-06-23 21:31:12 +00:00
d0c5097f05
Typo
2002-06-23 20:36:36 +00:00
34e950c569
Add files for bge at pci attachment.
2002-06-23 20:36:26 +00:00
25992495dc
Since CLK_TCK is now a macro expanding into a function call, cache its
...
output instead of using it willy nilly.
2002-06-23 20:21:08 +00:00
25e1b60346
In the manner of Solaris and other OSes, we now define CLK_TCK to
...
expand to a call to __sysconf(_SC_CLK_TCK), rather than hard coding it
as a constant.
2002-06-23 19:41:04 +00:00
ea360bda1a
make sysconf(_SC_CLK_TCK) return the kernel hz value, instead of a
...
fixed constant, as is done on Solaris, Linux, etc.
Technically, standards don't *require* this, but having it return a
constant is a violation of the spirit, and screws up programs that
(perhaps improperly) assume that it will return kernel hz.
2002-06-23 19:19:01 +00:00
9cb2f482f0
When delivering a signal, arrange to have the handler invoked directly,
...
using the trampoline only for the return. This saves two instructions
in the trampoline, one of them being a branch.
2002-06-23 19:16:43 +00:00
7f7f0f86bd
When delivering a signal, arrange for the handler to be invoked
...
directly. The trampoline is now used only for the return, and
makes it another 2 instructions shorter.
2002-06-23 18:49:33 +00:00
508e2dcf41
When delivering a signal, don't push the signum, code, and context pointer,
...
or handler onto the stack. Instead, just stuff them into the correct
argument registers (handler is a "4th arg").
2002-06-23 18:35:05 +00:00
lukem