- returned EOPNOTSUPP rather than -1.
- no check for negative offset.
many of these fix potential security problems in these drivers.
XXX XXX XXX
the d_mmap cdev routine should be changed to have a prototype like:
paddr_t (*d_mmap) __P((dev_t, off_t, int));
by someone!
- cpu_set_kpc() now takes void *arg third argument, passed to the
entry point.
- cpu_fork() allows parent to be non-curproc iff parent is proc0.
When forking non-curproc, assume its state has already been saved.
- Adjust various pieces of machine-dependent code to account of all of this.
-sys/lib/libkern builds as library per default (as it was documented all
the time)
-ports able to LKM set "KERN_AS=obj" explicitely in their Makefiles
(for now; should depend on actual "option LKM" or -better- functions
included for LKM use should be pulled in by a stub)
-always link libcompat before libkern - libkern stuff can be referred to
by libcompat, but not the other way
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090, from Matt Jacob.
which require special handling, e.g. sigreturn on m68k.
This differs from the old sigreturn trap in that we require the syscall
number to be in register d0, just like the regular syscall entry point.
This will allow sigreturn to be versioned in the future without the need
to allocate another trap vector.
u-area in machine-dependent code. Instead, call exit2() to schedule
the reaper to free them for us, once it is safe to do so (i.e. we are
no longer running on the dead proc's vmspace and stack).
. cache control functions <m68k/cacheops.h>
. sigreturn code <m68k/m68k/sigreturn.s>
Also a few of other things found while scouting around for vm_offset_t
changes.
as with user-land programs, include files are installed by each directory
in the tree that has includes to install. (This allows more flexibility
as to what gets installed, makes 'partial installs' easier, and gives us
more options as to which machines' includes get installed at any given
time.) The old SYS_INCLUDES={symlinks,copies} behaviours are _both_
still supported, though at least one bug in the 'symlinks' case is
fixed by this change. Include files can't be build before installation,
so directories that have includes as targets (e.g. dev/pci) have to move
those targets into a different Makefile.
Use of the latter caused the 1st and 2nd stage boot loaders to occupy
over 64k of memory. This caused them to fail on a 4Mb mvme147 since
they are loaded at 0x3f0000.
Reported by Kristen A. McIntyre and Maxime Kurkdjian.
a HAVE_GCC28 check-variable that can now be used to add other gcc-2.8
flags in cases where they may be useful, or to remove gcc 2.7.2 "bug
workaround" flags.)
- Maintain two copies of the number and size of physical memory segments.
One copy, mem_clusters[], contains _all_ of physical RAM, for crash dumps.
The other copy, phys_seg_list[], starts out with all of physical RAM (and
is used to initialize mem_clusters[]), but is adjusted to be the memory
actually managed by the VM system.
- Fix computation of physmem; when support for MACHINE_NEW_NONCONTIG was
added, physmem was accidentally changed to not take into account the memory
located before the kernel, or the memory taken up by the kernel itself.
- Make initialization of the message buffer a little less magic-looking.
- Maintain two copies of the number and size of physical memory segments.
One copy, mem_clusters[], contains _all_ of physical RAM, for crash dumps.
The other copy, phys_seg_list[], starts out with all of physical RAM (and
is used to initialize mem_clusters[]), but is adjusted to be the memory
actually managed by the VM system.
- Fix crash dumps with regard to multiple memory segments.
as this breaks C++ code that happens to indirectly include this header.
Both Matthias Scheler and I noticed this, independently.
This problem notably does not affect the atari and sun3/sun3x ports,
which have already implemented a similar solution.
was converted to use Mach VM for Net2/4.4BSD. The user segment table
pointer was originally stored in the PCB. When Mach VM came along,
however, it was also stored in the pmap, and loaded into the PCB in
pmap_activate(). pmap_activate() would then note that the PCB's USTP
was now in sync with the pmap's USTP, and the low-level context switch
code would use the value from the PCB.
However, pmap_activate() would also load the hardware MMU context if
the pmap was the current pmap (or, in the case where pmaps can be shared,
such as in NetBSD, if the proc was the current proc). The low-level
context switch code would then reload the hardware _again_ using the
USTP from the PCB.
However, the optimization of not calling pmap_activate() if "stchanged"
was false ended up causing some processes to use stale USTP values from
the PCB when the low-level context switch code reloaded the hardware!
This was noticed by using a real vfork(2) (which worked for some time
before failing, surprisingly!)
Since I'm hard pressed to find any real optimization here (since the
hardware was always reloaded once, sometimes twice!), the code now always
calls pmap_activate(), which uses the correct USTP value (the one in the
pmap). The PCB's USTP is now ignored, and should eventually be g/c'd.
Another optimization can actually be performed, and I have added a comment
describing what it is, but have not yet implemented it.
Also note that most of the loadustp() functions where actually incomplete.
This has been corrected. These functions should probably be split up into
MMU-specific operations, and called indirectly, rather than doing constant
run-time decision making based on values that will never change during the
course of a boot's lifetime.
always located at the end of onboard RAM. This allows locore.s to zero
any offboard RAM to initialise the parity bit which most VMEbus RAM cards
have. Without this, many cards buserr on the first read access.
Thanks to Herb Peyerl for the idea.
pseudo-device rnd # /dev/random and in-kernel generator
in config files.
o Add declaration to all architectures.
o Clean up copyright message in rnd.c, rnd.h, and rndpool.c to include
that this code is derived in part from Ted Tyso's linux code.
msgbuf. Note that old 'dmesg' and 'syslogd' binaries will continue running,
though old 'dmesg' binaries will output a few bytes of junk at the start of
the buffer, and will miss a few bytes at the end of the buffer.
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
Correct handling for Trap #2 in SunOS executables,
now that we know it is supposed to flush the cache.
(Was thought to be "some obscure FPU operation".)
- cpu_startup() - mark pre-text pages VM_PROT_NONE and kernel text pages
VM_PROT_READ|VM_PROT_EXECUTE in kernel_map, to avoid strange things like
COW'ing the kernel text (from hp300 port)
- Fix dumpsys() to conform to the new dump bdevsw calling convention.
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
Eliminate obsolete global kernel variable "struct timezone tz"
Add RTC_OFFSET option
Add global kernel variable rtc_offset, which is initialized by
RTC_OFFSET at kernel compile time.
on i386, x68k, mac68k, pc532 and arm32, RTC_OFFSET indicates how many
minutes west (east) of GMT the hardware RTC runs. Defaults to 0.
Places where tz variable was used to indicate this in the past have
been replaced with rtc_offset.
Add sysctl interface to rtc_offset.
Kill obsolete DST_* macros in sys/time.h
gettimeofday now always returns zeroed timezone if zone is requested.
settimeofday now ignores and logs attempts to set non-existant kernel
timezone.
on indirect-config busses a (permanent) softc that they could share
between 'match' and 'attach' routines:
Define __BROKEN_INDIRECT_CONFIG so that old autoconfiguration
interfaces are used, until drivers are converted to use the new
interfaces (actually, converted back to use the _older_ interfaces)
which prohibit indirect configuration devices from receiving a softc
in their match routine that they can share with their attach routine.
Lets users over-ride with makeoptions COPTS="..." in kernel config files.
Leave `mandatory' flags (like -msoft-float which on m68k enforces no
FP in kernel) in CFLAGS.
everything before the beginning of the "a" partition on a disk
is read-only except when accessed via RAW_PART. (a problem if
"a" isn't at the front of the disk). pointed out by pk back
in july.
- Use information obtained from the Bug in locore to make identifycpu()
produce some slightly more meaningful output.
- Garbage-collect some left-over hp300-specific stuff.
- Use the Bug to find out what kind of machine we're running on, and
Do The Right Thing, namely:
- Set `cputype' and `mmutype' as appropriate.
- Crap out if the kernel doesn't support the machine we
booted on.
- Add hooks for MVME-{162,167,177} models; just an empty shell to be
filled in later.
- Use `MMU_68040' rather than `-2' when checking the MMU type.
