a8421d4787
Some W83781 have ID 0x11 instead of 0x10; handle these too.
...
Restore printing sdata for each sensors if DEBUG.
2000-08-03 09:27:01 +00:00
b6dd28b4ce
Support some differences in the Macronix 98715AEC-C and E chips from the other
...
98715* series.
The MX98715AEC-[C,E] use a different location in the serial eerom for
LED control, and programming it with the original location's values
caused unpredictable behavior.
Also, start integrating fixes where media changes on an adapter
under load may fail. There's more work to be done here, but I need
to sort out our internal changes a little more carefully.
2000-08-03 03:07:30 +00:00
cb4d63d57c
More compilation breakage in the non-DEBUG case
...
(from Castor Fu <castor@geocast.com>)
2000-08-03 03:00:04 +00:00
e97c2066ab
Add options DDB_BREAK_CHAR. This overrides break on the serial console
...
break character with the supplied one. This is useful for cases where
break is hard to generate, or you are connected to a PC that "sends"
breaks when power cycled. For this mode in com, interpret break char
in the polling section, which allows entry into the debugger before
the tty is opened. Only supported in the com driver currently.
2000-08-03 00:30:47 +00:00
de378db998
W83781D: Explicitely reselect bank0 before using "value RAM" registers.
...
Hopefully this will make the W83781D works.
Also use common functions to set up fan & temp info[] & sensors[] for
the W83781D.
2000-08-02 22:20:41 +00:00
e445e43ddc
Add support for the W83697HF - basically a W83627HF with only 2 temp sensors.
2000-08-02 21:50:37 +00:00
46c3f0204d
PCIIDE_CMD0646U_UDMA->PCIIDE_CMD0646U_ENABLEUDMA for consistency with
...
PCIIDE_AMD756_ENABLEDMA
defopt PCIIDE_CMD0646U_ENABLEUDMA, PCIIDE_AMD756_ENABLEDMA,
PCIIDE_CMD064x_DISABLE
Fix a typo pointed out by John Hawkinson
2000-08-02 21:49:09 +00:00
bd0766459c
Add support for the CMD PCI646U. Linux claims that this driver is brocken
...
with UDMA, so enable Ultra-DMA only if "options PCIIDE_CMD0646U_UDMA" is set.
2000-08-02 20:23:45 +00:00
1ae072f471
Fix bonehead bug for compiles w/o DEBUG set
...
(thanks to KANETA Shin'ichi <kaneta@cr.chiba-u.ac.jp>)
2000-08-02 17:39:50 +00:00
068c76fc80
Core version 2.0 (platform version 1.0) rewrite of ISP driver. Some
...
interace cleanups, some new common functions. The major impact that
will be noticeable right away is that if you boot with not Fibre connected
to the FC cards, you no longer hang indefinitely.
2000-08-01 23:55:09 +00:00
76c77aca38
Add support for the CMD PCI0646U2, an Ultra/33 version of the 0646.
...
Note: there's also a PCI0646U, for which I don't have docs for now.
2000-08-01 21:02:55 +00:00
02e3c1ef40
Use bus_space_read/write_multi_stream_2 for FIFO instead of bsr/w_multi_2.
2000-07-31 22:48:49 +00:00
f21a75dee3
XIDEBUG_CONFIG -> XID_CONFIG. From R.Massar@Fh-Worms.DE
2000-07-31 21:49:47 +00:00
067f5e9814
Previous would have misbehaved if polled commands overlapped.
2000-07-31 13:16:34 +00:00
35913a898c
Sync internal state and ifmedia state. Addresses PR#10424.
2000-07-31 03:25:11 +00:00
3628f3e00c
Make sure that we do not call bus_space_*_multi_* with zero count.
2000-07-31 02:14:47 +00:00
100a4a6b22
Add support for the W83781D and W83782D hardware monitors.
2000-07-30 22:23:53 +00:00
e6dde2bd42
Add MII support to smc91cxx driver. This is supported for the 91c100
...
and 91c100FD (FEAST) controllers. Existing controllers should continue
to work as they have. Added the card's memory to the probe message.
2000-07-30 21:34:47 +00:00
538126d75a
swap lm_match() and wb_match(), as wb_match() is more restrictive.
...
Otherwise a winbond can be mis-probed as a lm if it has the rigth device ID.
Problem reported by Bernd Ernesti.
2000-07-30 17:22:26 +00:00
b5e3ec56a8
Remove src/sys/dev/apm/*. (They've gone to arch/hpcmips/dev/apm.)
2000-07-30 04:41:15 +00:00
d569dc2fb5
Whitespace fix (space rather than tab after #ifdef)
2000-07-29 17:49:08 +00:00
cbd3022e31
Make this compile without PUCCN defined.
2000-07-29 17:43:38 +00:00
b2bf026f39
Guard the console code in puc.c with the defopt PUCCN so we can
...
use the puc driver without having the com drivers.
2000-07-28 20:43:45 +00:00
457d8d7c7e
print parent device name too, so we know which socket a card was probed at
...
and whether pcmcia or cardbus
2000-07-28 19:17:02 +00:00
081f57c846
Handle booting without a serial expander box connected.
2000-07-28 06:10:54 +00:00
10debdeb9c
Fix to autonegotiation problem with some fxp cards. Fix found and reported
...
by Erich T. Enke et al. on current-users. This fixes PR 10550.
2000-07-27 22:14:48 +00:00
e955a714ba
Add support for the W83627HF: lm7x like, but with more sensors, and more
...
registers.
2000-07-27 21:49:22 +00:00
ca5b9b0c22
Force 64bit arithmetic for timeout computation; a 32bit int opverflows for
...
large timeouts. Should fix PR kern/10575.
2000-07-27 21:28:17 +00:00
a7d2293ea4
My 16 port boca seems to fail to update the interrupt bit in it's interrupt
...
register for a port under high load. The effect is that the port is wedged
waiting for an interrupt that will never come.
Add a callout-based watchdog which periodically (hz/10) scan trough the ports
for missed interrupts.
Problem also noted by Chris Jones, and this fix also helped him.
2000-07-27 20:08:47 +00:00
0154cbce36
Ops, forgot this one: Add interrupt disable bit #define for HPT370
2000-07-27 15:26:16 +00:00
aa0d4a41d5
HPT370: clear disable interrupt bit; make it works in Ultra/66 mode.
2000-07-27 14:28:45 +00:00
acb96154d0
More intelligent BI vector assignment.
2000-07-26 12:41:40 +00:00
34604a9f79
No point in forcing SECDAY to be a long int.
2000-07-26 11:07:45 +00:00
188122248a
I've confirmed that Samsung MagicLAN SWL-2000N (PRISM-II) works
...
with WEP enabled.
2000-07-26 07:28:56 +00:00
cc8e6675e2
add Samsung MagicLAN SWL-2000N
2000-07-26 07:24:15 +00:00
fa8ff381d8
Add code to allow the PCI com serial ports to be used as the system
...
console. This is not enabled by default, and is turned on with
options PUCCN. Done by castor@netbsd.org .
2000-07-25 23:18:42 +00:00
969b4bc568
Define the todr(9) interface.
2000-07-25 22:38:14 +00:00
4ba0c6b55c
New time-of-day clock chip drivers. These implement the todr(9) interface.
2000-07-25 22:33:02 +00:00
27d41a1de3
Map txrate for prism2, where each bit is apparently assigned to the
...
corresponding rate; 1Mbps, 2Mbps, 5.5Mbps, 11Mbps.
2000-07-25 12:04:29 +00:00
5463f7b316
Improve the model identification and match. Addresses PR-10485.
2000-07-24 21:50:10 +00:00
b023fdd2b7
Regen.
2000-07-24 21:47:40 +00:00
0f37cacaf1
Add entries for all Xircom ethernet models.
2000-07-24 21:45:00 +00:00
10afc4e0a8
create a funcion, siop_busreset(), to reset the scsibus.
...
Reset the scsi bus at attach time, to be sure all devices start in narrow/async
mode.
Defer sync/wide negotiation until after whe have a valid
xs->sc_link->device_softc, so that we can honnor the NOSYNC/NOWIDE quirks.
2000-07-24 15:15:00 +00:00
197f977187
Pass the level and vector to vme_intr_map() in the correct order.
2000-07-24 15:00:41 +00:00
74cf7af4a9
Increase polled command timeout to 2s.
2000-07-24 12:28:31 +00:00
f9f72ecf9a
Purge C++-style comments.
2000-07-24 04:28:51 +00:00
a119131555
Be a little more explicit and careful about setting links in TDs and QHs.
2000-07-23 19:43:37 +00:00
5f7778cd1e
* Add entries for older Yamaha YMF chips (724, 740) plus the
...
newer steppings (740C, 724F) which use the same microcode as the
DS-1S/DS-1E.
Regen.
2000-07-23 00:18:24 +00:00
2169753fc5
* Add entries for older Yamaha YMF chips (724, 740) plus the
...
newer steppings (740C, 724F) which use the same microcode as the
DS-1S/DS-1E
2000-07-23 00:14:15 +00:00
19bd1749ad
Add short device descriptions in comment lines.
2000-07-22 21:25:52 +00:00
8be010f00d
- Big endianness cleanup:
...
a) use stream methods when transferring data via the MEMPORT into/out of
the chips buffer memory
b) use htole16/le16toh when interpreting 16bit values in the chips memory
Both where NOPs on i386 machines, which is why this worked before on the
test machine(s), but would break when on a big-endian machine.
2000-07-21 13:54:38 +00:00
afa5b645c2
add support for SIOCS80211NWKEY and SIOCG80211NWKEY.
2000-07-21 04:48:55 +00:00
c9355a957c
Add the pccard controller for a Toshiba Portege drive. No vendor ID, no
...
product ID, and in this temporary loan, no bleeding power supply so it
can only probe the controller and not the drive. Still, its something.
2000-07-20 23:20:01 +00:00
a1b8e79bb1
Take advantage of generic soft interrupts, if available.
2000-07-20 20:44:50 +00:00
b60bcd873d
Regen.
2000-07-20 14:47:35 +00:00
d3b42c18e4
Add what is apparently ESS's old vendor ID and corresponding product ID for
...
the Maestro 1.
2000-07-20 14:46:51 +00:00
6e88d58524
Make it compile when PCIIDE_AMD756_ENABLEDMA is defined. From kern/10555
...
by MURATA Shuuichirou.
2000-07-20 12:19:41 +00:00
83f94dc417
Regen.
2000-07-20 07:11:28 +00:00
4af0fbdb1a
Add PMAG-JA framebuffer.
2000-07-20 06:38:39 +00:00
0d5d0bd93a
don't define LIST_FOREACH, it's in sys/queue.h now.
2000-07-20 03:47:56 +00:00
c47c527343
add some more CTIO flags
2000-07-19 22:19:23 +00:00
0615788781
zero result queue entry when done if debugging.
...
don't do an isp_notify_ack if we're not at run state.
2000-07-19 22:19:00 +00:00
93379fb341
fix mislabelled error case
2000-07-19 22:18:02 +00:00
f9e6c9cf42
Fixx off-by-one error in handlereset().
2000-07-19 16:07:00 +00:00
554019cd4b
More printf format munging for off_t: when printing as %lld, cast to long long.
2000-07-19 13:44:24 +00:00
00cafd0569
Add MIDI support. From Tatoku Ogaito.
2000-07-19 09:58:45 +00:00
0ab524f389
moved the check priviledge for SIOCS80211NWID from each driver to ifioctl().
...
it also fixes the problem that non-priviledged user can change nwid
for wi and ray drivers.
2000-07-19 06:00:39 +00:00
7d1b0e5b39
Use device_lookup() and ditch TAILQ sillyness.
2000-07-18 15:27:44 +00:00
47f692248f
add WEP support also for PRISM2 cards.
...
Corega works fine with WEP, but farallon doesn't work well with WEP for now..
2000-07-18 15:01:55 +00:00
905b4e497f
Add support for Corega Wireless LAN PCC-11, and Farallon SkyLINE 11Mb.
...
Note that Corega card works at 3.3V only, then it requires cardbus code
for now.
2000-07-18 14:53:26 +00:00
4a2a3bf091
Add Farallon SkyLINE 11mb card as Intersil Prism2
...
vendor:product of the card is Lucent:WaveLAN, and CIS string shows
"INTERSIL" "HFA384x/IEEE"...
2000-07-18 14:48:10 +00:00
c41ca10d33
add "#define PCI_INTERRUPT_PIN_MAX 0x04"
2000-07-18 10:59:04 +00:00
693ff4c94d
PAGE_SIZE -> IOASIC_DMA_BLOCKSIZE in one last place. From Izumi Tsutsui.
2000-07-18 06:14:05 +00:00
b91d520dc9
Back out previous. It is no longer needed, as both the Alpha
...
and DECstation IOASIC drivers clear the appropriate interrupts
in the dispatch routine.
2000-07-18 06:12:33 +00:00
5446d3c92e
Don't make assumptions of the actual value of PCI_PMCSR_STATE_D0.
...
Problem noted by John Hawkinson.
2000-07-17 18:12:00 +00:00
cfae3184d8
Don't clobber bits from 2 to 31 when trying to change the power state.
...
Problem noted by John Hawkinson.
2000-07-17 17:53:44 +00:00
5e275d7012
Clear the DMA pointer reload interrupt bits in the IOASIC_INTR
...
register to prevent interrups from looping on the Alpha.
From Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>.
2000-07-17 17:43:16 +00:00
3aacf9101a
Regen.
2000-07-17 13:07:21 +00:00
82b491eecc
Some more products (from FreeBSD).
2000-07-17 13:06:54 +00:00
8746b7c870
- Write the registers 7930 registers properly on the Alpha (it's
...
different than on the DECstation).
- Use IOASIC_DMA_BLOCKSIZE instead of PAGE_SIZE.
Should make this work on the Alpha. From discussion with
Izumi Tsutsui, Gregory McGarry, and Chris Demetriou, and
much reading of EK-D3SYS-PM.
2000-07-17 04:37:27 +00:00
887bebaa71
Define IOASIC_DMA_BLOCKSIZE (4096 bytes).
2000-07-17 02:18:17 +00:00
8623daff6d
G/c some unused (and incorrect, for our usage) definitions.
2000-07-17 02:17:13 +00:00
95f72dd4aa
Use the IOASIC_DMA_ADDR() macro now that it is fixed.
2000-07-17 01:29:02 +00:00
cd6fa19644
Make sure to get the upper 5 bits of the page address mixed in
...
in IOASIC_DMA_ADDR(), as the le_ioasic attachment does. Noted
by Gregory McGarry.
2000-07-17 01:28:16 +00:00
114bb7f9d9
If card is in power state D3 put it into power state D0 so that it will
...
at least work after the next reboot.
2000-07-16 20:18:48 +00:00
859057e6b3
Fix uninitialized variable (reg) in fxp_pci_confreg_restore();
...
this could result in garbage being written to the PCI status register,
which is unlikely to have had a serious effect. This was with us from
an #if 0 added in rev 1.6.
2000-07-15 21:36:19 +00:00
9feae259a4
Avoid printing duplicate colon when card is waked up.
2000-07-15 20:57:24 +00:00
cfe61a3025
Un-__P'ify kernel prototypes.
2000-07-15 19:59:27 +00:00
54ccff0437
define "80x24" screen types for better vt100 compatibility
2000-07-15 18:47:54 +00:00
20305c6623
Fix a typo in the `device_lookup()' changes.
2000-07-15 18:12:42 +00:00
61c607b9fe
Improve kernel message when card is in power state D3. Instead of...
...
epic0 at pci0 dev 11 function 0 epic0: unable to wake up from ...
... print this:
epic0 at pci0 dev 11 function 0: unable to wake up from power state D3
2000-07-15 10:32:36 +00:00
498310f5be
Check if card was put into sleep mode using PCI/ACPI power management
...
and try to restart it. This patch based on hints by Jason Thorpe.
2000-07-14 22:00:32 +00:00
b141a6bfe8
Merge-o.
2000-07-14 21:09:45 +00:00
dc4b749234
Fix the status reporting for copybacks. Thanks to Hubert Feyrer for
...
reporting the problem.
2000-07-14 15:26:29 +00:00
d8205b6db1
Do a dummy read after writing through the memory access pipeline, to flush
...
it, before starting the command to install the multicast list.
(We did it right for writing data packets, but failed here.)
Without this, the last multicast address installed won't be made active.
2000-07-14 10:50:50 +00:00
ceafcbd834
apply Kenji Aoyama <aoyama@nk.mcu.or.jp>'s patch
...
on port-hpcmips-ja@jp.netbsd.org Mon, 10 Jul 2000 21:21:47 +0900
FIX:
Can't read CIS tuple chain:some TDK CF Flash memory card.
2000-07-14 08:02:12 +00:00
c675def443
Update comment.
2000-07-12 23:14:09 +00:00
1a82fc879b
Regen.
2000-07-12 22:59:54 +00:00
16a4fd2bff
Add DEC DE422 Ethernet.
2000-07-12 22:59:23 +00:00
b2a5b02fc9
Fix a couple of LP64 problems (long -> int32_t).
2000-07-12 21:15:33 +00:00
6c4d97da13
Indicate WEP capability to association request when WEP is enabled.
...
Without this fix, some (IEEE802.11 conformant) APs will send data to this
station without using WEP.
2000-07-11 12:54:00 +00:00
4f051180a0
- Use PMAD-BA name for device match logic. It's not a real TURBOchannel
...
device and the id string is not found in option ROM string, but
ULTRIX/OSF1 call it so anyway.
- Squash IOASIC DMA buffer allocation into device attach() sequence.
2000-07-11 04:10:25 +00:00
b71bddab49
Regen.
2000-07-10 16:32:07 +00:00
5a5452c95d
Add ICP Vortex RAID controllers.
2000-07-10 16:14:02 +00:00
b99e56173c
do not allow non-priviledged user to change nwid via ifconfig.
2000-07-10 14:36:17 +00:00
0de5b6e260
these don't need <uvm/uvm_extern.h> at all, actually.
2000-07-10 13:54:54 +00:00
c2ed037f55
move associated/synced/no-recent-beacons messages to IFF_DEBUG.
2000-07-10 12:32:53 +00:00
469c88cc11
Clarify that the RX5C47X requires writes to the PCI_LEGACY to
...
disable and not PCI_BCR_INTR; this is what rev 1.9 did under
the label of "Maintenance."
2000-07-09 22:06:02 +00:00
e6e9cc5c41
Move legacy pcic-mode disabling code from pccbb_chipinit() to
...
pccbbattach(). This is necessary as pccbb_chipinit() is deferred, and
may not run until after the pcic is already attached.
Now pcics are properly disabled on Sony VAIO, f'rinstance.
2000-07-09 21:58:30 +00:00
406e0f779f
Add a `device class' interrupt level argument (from machine/intr.h)
...
to bus_interrupt_establish().
It's currently only used in sparc64/dev/psycho.c to assign a CPU interrupt
level to devices in PCI slots.
2000-07-09 20:57:41 +00:00
d621cc4cb0
Add missing newlines in some messages.
...
Set Vpp the same as Vcc by default. We need to do more with voltage sense.
2000-07-09 01:55:18 +00:00
bd8f07c394
Recognize the i82559ER.
2000-07-09 00:46:26 +00:00
5cdb782283
Regen.
2000-07-09 00:45:56 +00:00
9d0e35cc63
Add ID for i82559ER.
2000-07-09 00:45:14 +00:00
dcf6e7b09e
When receiving an rx interrupt on a closed or unconfigured port, read
...
the data out of the board anyway so it won't re-interrupt anyway.
Fix tested by C Kane <ckane@best.com>
2000-07-08 18:36:02 +00:00
ed9ce99d8c
printf format paranoia
2000-07-08 17:12:08 +00:00
6421cc8af8
regen
2000-07-08 04:39:50 +00:00
d74c0a2e3e
add microSPARC IIep PCI controller
2000-07-08 04:38:55 +00:00
0d97100854
Use vme_dmamap_create().
...
Also, this device lives in VME_D16 data space.
2000-07-07 21:12:21 +00:00
67f1f77b78
Use vme_dmamap_create().
2000-07-07 21:11:08 +00:00
2646cf1612
Use the CMD PCI0648/9 IRQ ACK code for the 0646 too, makes the 0646 works
...
in native mode.
2000-07-07 13:54:25 +00:00
58a60a43f2
Gah. Bad port from FreeBSD code (thanks Robert Elz) for setting
...
up default timeout for watchdogging commands.
2000-07-07 03:14:53 +00:00
f420228afb
Define splaudio as splbio and IPL_AUDIO as IPL_BIO only if IPL_AUDIO
...
is not defined. Previously tested for specific system architectures (i386,
etc.) rather than just looking for IPL_AUDIO.
2000-07-07 01:11:12 +00:00
8cc5c2c8f1
Rename NODESIZE to BI_NODESIZE.
2000-07-06 17:47:02 +00:00
c0f8f713bf
Initial support for the XMI bus on VAX, MIPS and Alpha systems.
...
Not completely finished yet.
2000-07-06 17:45:52 +00:00
a4d6bdac79
do not show wep keys to non-root users.
2000-07-06 17:22:25 +00:00
c8793c3d7e
Change type `kbd_t' from `u_int_16_t' to `u_int32_t'.
...
This eliminates bogus casts from `int *' to `u_int_16_t*'.
2000-07-06 16:29:49 +00:00
e2aaf9ef7f
Work around a bug in AMD756 rev D2, from patches provided by David Sainty:
...
disable multiword DMA for these chips. multiword DMA can be forced with
options PCIIDE_AMD756_ENABLEDMA on rev D2 chips, but use at your own risk !
While I'm there remove a duplicate allocation of sc_wdcdev.nchannels in HPT
code.
2000-07-06 15:08:11 +00:00
555fde1163
Fix reversed test in umass_activate(). Probably fixes PR 10520.
2000-07-06 07:11:18 +00:00
d28fe378bc
Use device_lookup().
2000-07-06 02:02:48 +00:00
b47890a934
Reserve top nibble of status for use by the HBA. It's up to the
...
HBA to set or clear it.
2000-07-06 01:56:23 +00:00
cb450cc444
Use device_lookup().
2000-07-06 01:47:34 +00:00
7ed7b1b9fd
Per advice from thorpej, reinstated some of Erik's changes.
2000-07-06 01:17:38 +00:00
5297dab6a8
Use device_lookup() *more*.
2000-07-06 00:48:53 +00:00
cfaba33937
Use device_lookup().
2000-07-06 00:43:04 +00:00
cde72a2c2b
Garbage-collect __BDEVSW_DUMP_OLD_TYPE.
2000-07-05 23:31:12 +00:00
f78b367775
Roll core version. Get rid of dogactive (no longer used). Add in some
...
volatile flags (isp_mboxbsy- keeps a bitmask of expected output mailbox
registers) and storage for them (isp_mboxtmp). Get rid of macroized
LUN widths. This is determined at run time.
2000-07-05 22:28:08 +00:00
7358822ab5
Fix incorrect uint8_t vs. u_int8_t usage. Add in offset macros for outgoing
...
mailbox regs and a INT_PENDING_MASK macro.
2000-07-05 22:26:53 +00:00
b520c663d0
add MBOX_GET_RESOURCE_COUNT command
2000-07-05 22:25:53 +00:00
93778c19b8
pick up FreeBSD changes
2000-07-05 22:25:34 +00:00
3626695b49
Roll platform minor. We are now always supporting ISP2100_FABRIC. Add
...
in new MBOX_WAIT_COMPLETE/MBOX_NOTIFY_COMPLETE macros (ready for SMPizing).
Define STRNCAT inline for our usage.
Stealing a bit of the xs_status flags to maintain command state that
is pertinent for the hBA- should really reserve them for private usage
in scsipiconf.h.
2000-07-05 22:25:06 +00:00
a743834a38
Redo watchdogs to handle cases of false death of commands- time
...
each command now.. Get rid of SCCLUn stuff. Use an isp_done routine
to handle cases of watchdog and isp_done racing to completion.
2000-07-05 22:23:05 +00:00
a7560ced04
Add back in a (corrected) isp_prtstst function.
2000-07-05 22:21:44 +00:00
e946846577
Back out previous commit- the author is incorrect. There is no 'narrow'
...
Qlogic controller driven by this chipset. If they don't want the verbosity,
don't compile a DIAGNOSTIC kernel.
Major amount of mailbox command rewrites- hopefully should fix some of the
outstanding PRs.
Change header to note that this is no longer maintained at NASA/Ames.
2000-07-05 22:20:51 +00:00
c466b99a9a
Use new isp_handle_index function. Redo how firmware is checked for
...
and loaded. Remember to enable interrupts after isp_reset but before
isp_attach. Return CMD_EAGAIN on request queue overflow so we can retry
the command when there's more queue space.
2000-07-05 22:12:23 +00:00
855b5ef9b0
Use new isp_handle_index inline function. Change order in whch
...
some things are done. Remember to enable interrupts after calling
isp_reset but before isp_attach.
2000-07-05 22:10:56 +00:00
f73a4d37e2
split firmware into smaller files
2000-07-05 22:09:08 +00:00
3c5afc2677
Back out previous, it has to be done in a different way.
2000-07-05 19:05:31 +00:00
838676ce64
Apply patch from David Sainty <David.Sainty@optimation.co.nz>:
...
Some AMD controllers have a bug which can look up the machine when using DMA, so
disable DMA for some revisions (info provided by AMD).
"options PCIIDE_AMD756_ENABLEDMA" can be used to force DMA on these chips.
2000-07-05 18:58:41 +00:00
e93c7e8dd2
typo. From: jdolecek
2000-07-05 18:47:51 +00:00
bouyer