struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090, from Matt Jacob.
controllers (including SCSI id 7 on the 2100/3100).
- On the pmax (2100,3100) set the host SCSI id to 6.
- Move disk and tape config for the second ASC controller from the GENERIC
config file to scsi.pmax so all configurations can use the second
controller.
* dec_5100.c: sysconf, interrupt, and motherboard (drain writebuffer)
support for 5100.
* support for hardware kludge in 5100: sii DMA buffer is hardware
padded to alternate 32-bit words, not alternating 16-bit halfwords.
* 5100 has no framebuffer, console is wired to serial port 0.
With ibus support, boots as far as exec'ing init, and hangs.
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
recovering from a possible race condition in sii_intr, read the active
target from the destat register, and set the softc state pointer
`state' appropriately. (This warning is in a block that prints a
warning message, and the warning message has _never_ been seen. The
bug is probably innocuous.)
Also addresses the `more thought needed' in the log message for rev. 1.12.
(The operator-precdence changes in 1.11 were pulled up in rev 1.14).
* If the chip asserts a SCSI-bus error (SII_BER) in sii_intr,
reset the SII_BER bit instead of ignoring it.
XXX SII_BER May need checking and resetting elsewhere.
Where CACHED_TO_HYS() is still needed for kernel-virtual-to-physical
or physical-to-uncached mapping (fb drivers), replace with
`#include <mips/cpuregs.h>'.
message-in. The remaining transfer count restored when a device is
reselected needs to be saved. The saved value is needed to compute
the number of bytes transferred if another disconnect occurs. This
fixes a random read data corruption that occurs on certain disks that
may disconnect more than once in the middle of a DMA transfer.
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
independent TC support in sys/dev/tc/tc.c and sys/dev/tc/tcvar.h:
* Change the tc autoconfiguration tables to use a struct tc_attach_args
instead of the ad-hoc structure.
* Change all pmax device drivers to use a `struct confargs' that's
assignment-compatible with sys/dev/tc/tcvar.h `struct tcdev_attach_args'.
Devices that can be present on a TC or as ioctl asic/mainbus builtins
use the same `struct confargs'.
* Eliminate the `BUS_CVTADDR()' macros which the pmax port inherited from
an old, now-obsolete sys/arch/alpha snapshot.
* Update the comments and debugging code in interrupt handlers to
be consistent with the machine-independent TC support.
Other commits that overlap the same source files include: re-enabling
clock-tick interrupts earlier, and counting hardclock ticks for vmstat -i.
"struct pmax_device" to avoid conflict with <sys/device.h>.
Change the signature of interrupt-handlers to take a void *
(a pointer to the softc) and return an int (indicating spurious
interrupts or other conditions.)
simonb