8a3333b2a9
Fix an inconsistency that came in with Lite: setrq() was renamed to
...
setrunqueue(), but remrq() was never renamed. Rename remrq() to
remrunqueue().
1996-11-06 20:19:19 +00:00
047ae9a04d
LC III+/Performa 460 series use same vectors as the LC III.
...
Verified by Bob Nestor and Pete Nush.
1996-11-05 07:20:09 +00:00
bbd25d0c38
- Move offset for 2nd scsi controller (Q900/Q950/WGS95) to 0x402
...
instead of 0x400.
- Restructure interrupt handling for more performance--continue to
read/write data as long as the device keeps us in a data xfer phase.
There is still a lot of room for speed improvement here. Perhaps it
lies is speeding up the interrupt path in general?
1996-11-04 21:20:01 +00:00
9da963b048
Remove include of ncr96scsi.h, since it's now an artifact, and the
...
unused include of ncrscsi.h while we're here.
1996-11-02 07:18:53 +00:00
7685e9d70b
Improve reliability on my Q700, at least. Was getting the occasional
...
glitch--an extra byte on occasion.
1996-11-02 06:52:24 +00:00
20c7b48d76
macs with scsibase offset 0x10000 from iobase use a SCSI CLK of 16.5MHz
...
(off PrimeTime)--all others appear to use 25MHz.
1996-10-30 05:39:21 +00:00
d5e58a6b20
Fix spelling error in panic. Double since of ResHndls[]. Use I/O kludge on
...
all systems, not just CLASSII--A bunch of Quadras apparently have hardcoded
I/O addresses in the ROMs, too.
1996-10-30 05:30:57 +00:00
a4d7da78e4
Add esp1 at obio?
1996-10-29 06:16:29 +00:00
50c2da8f27
Interrupt-driven, but slow, NCR 53c96 driver for the 040-based macs. Contains
...
some guesses for the machines that have two of these buggers (I don't have
such a machine). This driver is a copy of the sparc/alpha esp with a
minimum of changes--after we get it performing a bit more respectably,
we should see about re-normalizing the sources.
1996-10-29 06:08:58 +00:00
32e07b8b3a
Add prototype for mac68k_register_scsi_b_irq().
1996-10-29 05:42:16 +00:00
215afb273e
Flag Q900/950 as having a second scsi controller.
1996-10-29 05:36:15 +00:00
487a6bebfc
Add a function to install an interrupt handler for 2nd scsi bus (Q900/950).
...
Take a guess that it's at via2, bit 0 (where 5380 DRQ is).
1996-10-29 05:33:37 +00:00
35667ae56f
ncr96scsi -> esp for consistency with sparc and alpha.
1996-10-29 04:26:57 +00:00
3c34dac1d0
Obsolete.
1996-10-29 04:23:50 +00:00
1e7948408e
Most 040 models have scsi regs at base + 0x10000, not base + 0xf000
...
like the Q700.
1996-10-28 03:54:08 +00:00
4675aac3cf
Set SCSIBase properly on Quadras. Separate out CLASSAV. From Dave Huang
...
<khym@bga.com>.
Also fix COMPAT_NOMID to compile again.
1996-10-23 14:12:37 +00:00
0363bd9a12
Include ether.h since we're now using NETHER, also use NETHER > 0 not NETHER.
1996-10-23 13:35:41 +00:00
289b73be85
Fix a raft of printf format strings and some declaration problems for
...
the case where we define DEBUG. From Erik Bertelsen, closes PR 2871.
1996-10-21 05:42:23 +00:00
084b3f6a4c
Fix two bugs noticed by Taras Ivanenko <ivanenko@ctpa03.mit.edu>
...
via.c: don't allow spl to remain at splhigh on error.
mainbus.c: Make sure that variable is initialized.
1996-10-21 01:59:31 +00:00
a6865e3d2b
Don't try to reference nfsbootdevname if we have no ether devices.
...
Fixes PR 2860, from Paul Goyette <paul@pgoyette.bdt.com>.
1996-10-21 00:31:18 +00:00
6bb6fab4ce
Changes from the hp300 trap.c:
...
- Fix up usage of MBD_ISPID(). (from Jason Thorpe)
- Be careful not to deref bad pointers in the MMU fault handler. (ditto)
- Ensure trap() never deals with a NULL proc, and if our proc has
no pcb, punt. (Suggested by Gordon Ross)
1996-10-17 06:42:44 +00:00
ccaecc2dda
Some changes from hp300 (thanks Jason!):
...
- Initialize proc0.p_addr just after setting up the kernel stack, to avoid
getting NULL pointers in trap(). Change suggested by Gordon Ross.
- Panic if main() returns.
1996-10-17 06:32:13 +00:00
e326c3123f
We're paranoid; disable the IIci's cache card.
1996-10-16 04:00:28 +00:00
3370e6c419
External cache card on the IIci is enabled by default;
...
use DISABLE_EXT_CACHE to turn it off.
1996-10-16 03:55:21 +00:00
a6bbf8fc5b
Define MACH_CLASSQ2, used by Performa 575.
...
Remove susword() because of prototype conflict with <sys/systm.h>.
1996-10-15 14:42:49 +00:00
b599d4a3f6
We no longer need 'options GENERIC'
1996-10-15 07:25:55 +00:00
dca6a7e025
Critical fix from Bill Studenmund: if CTS is deasserted and then
...
immediately reasserted before we get a chance to process the interrupt,
we can inadvertantly get stuck with zs_tx_stopped set. Move the delta
detection to the hard zs interrupt handler; the softint handler
will notice that something has happened with CTS and restart the
transmitter if it's asserted.
1996-10-15 06:57:43 +00:00
6cd86aa894
BSD -> NetBSD
1996-10-15 06:41:48 +00:00
f4eeb69eab
Several 68040/68LC040-related changes; we're not there yet, but this
...
brings us closer to basic operation.
- Verified/updated ROM vector entries for many systems, and new vector
table entries for LC 520, LC 575/577/578, and Quadra 950
- Implement a new machine class (MACH_CLASSQ2) for the LC 575 series
- Use the ptest040() helper function in get_physical().
Also, in straytrap(), only enter the debugger #ifdef DDB.
1996-10-15 06:40:39 +00:00
31d8d5c176
Implement ptest040(), a helper for get_physical().
1996-10-15 06:31:07 +00:00
534c6caa6b
Add EXEC_AOUT and EXEC_SCRIPT
1996-10-14 07:01:10 +00:00
ad67e04154
backout previous kprintf change
1996-10-13 16:50:51 +00:00
40ecbf8e72
backout previous kprintf change
1996-10-13 03:21:13 +00:00
2903ee4df5
Add second Quadra class and machineid (gestalt value) for Color Classic II
1996-10-12 07:35:29 +00:00
06555645c2
printf -> kprintf, sprintf -> ksprintf
1996-10-11 00:24:36 +00:00
e36e19cf1e
repoint at shared aout_machdep.h, not exec.h
1996-10-08 13:07:26 +00:00
472889f8e4
moved to aout_machdep.h (via repository copy)
1996-10-08 12:57:37 +00:00
872c12f95f
Update ROM vectors for PB 500
1996-10-07 04:05:02 +00:00
4d11703980
Disable 040 caches in doboot(), and some minor stylistic changes to make
...
the hand-coded assembly consistent throughout.
1996-10-07 01:37:20 +00:00
d036bd234e
Sync with Chris' changes to the alpha setroot() and friends to resolve some
...
problems with entering "halt" at prompts.
1996-10-04 14:07:03 +00:00
0f40954572
Add ROM vectors for the LC III, verified by Mike DeLima
...
<miked@netrover.com>.
1996-09-27 06:55:29 +00:00
21761e4ec0
Update for recent config(8) changes.
1996-09-22 06:49:09 +00:00
197a86e724
Don't allow get_physical to attempt get_pte if mmutype is 68040.
...
(At least until get_pte works on the 040).
1996-09-18 03:33:23 +00:00
d13cb4414c
Convert `fpu_type' to the more consistent `fputype', and use the new
...
#defines from m68k/include/cpu.h.
1996-09-16 18:00:26 +00:00
3cf197cef1
Somehow the last change got mangled. Do over.
1996-09-16 05:24:21 +00:00
014f910806
Add ZS_CONSOLE_ABORT
1996-09-16 04:35:25 +00:00
debc473329
- Add a ZS_CONSOLE_ABORT option to enable a serial console break to
...
force a drop to the system debugger. WARNING: this used to be the
default behavior! Modify custom kernel configs accordingly.
- Check for ZS_HWFLAG_CONABRT in zs_abort(), and don't abort if it's
not set.
1996-09-16 04:32:28 +00:00
696dd783a4
Move check for ZS_HWFLAG_CONABRT to zs_abort().
1996-09-16 04:19:26 +00:00
a4b22a046a
Implement poll(2).
1996-09-14 06:08:01 +00:00
19d545f1ae
- Implement poll(2)
...
- Convert splhigh() -> spladb()
- Guard references to adb_evq_tail and adb_evq_len!
1996-09-14 06:01:12 +00:00
cgd