d5df55112a
vm_offset_t -> {paddr_t,vaddr_t}, vm_size_t -> vsize_t
1998-08-14 16:50:00 +00:00
97e83f6e0b
Change the "vm_offset_t"s to "u_long"s for now; eventually, we can make
...
them vaddr_t and paddr_t, as appropriate (after scouring the RPB docs
to know which are phys and virt addresses).
1998-08-14 16:46:09 +00:00
308117258b
Add filecorefs so we get the header files installed.
1998-08-14 13:05:37 +00:00
e3e7e1673f
Fix the NEXT_IA_WITH_SAME_ADDR macro introduced in 1.27: it was finding
...
the first in_ifaddr structure with a different internet address! Reverse
the sense of the test. Spotted by and fix from Eric Haszlakiewicz.
1998-08-14 06:57:54 +00:00
170eadd04c
Add FILECORE filesystem.
1998-08-14 03:56:21 +00:00
0641969cd0
Added a vnode type for filecore fs (VT_FILECORE).
1998-08-14 03:31:16 +00:00
10198359c6
Define filecore mount and filecore node memory types.
1998-08-14 03:29:49 +00:00
922fa73143
Define the filecore filesystem MOUNT_FILECORE.
1998-08-14 03:28:56 +00:00
69244872a4
deffs FILECORE
...
Added filecorefs files.
1998-08-14 03:27:51 +00:00
faf4eed3e3
Initial commit of Andrew McMurry's Acorn Filecore filesystem.
...
This is a read only implementation of the filecore filesystem found
on Acorn RiscPC machines (arm32).
1998-08-14 03:26:12 +00:00
4283228f33
Make message less confusing
1998-08-14 02:20:07 +00:00
183442fe73
Emulate ulinear_be using slinear_be on later chips.
1998-08-14 00:49:23 +00:00
ae8bdb1e72
Make sure CIMDIS is set and FLINK is clear in the PCR.
1998-08-14 00:23:26 +00:00
f41c00629b
Garbage-collect vm_offset_t and vm_size_t.
1998-08-13 21:36:27 +00:00
330d142f16
vm_offset_t -> {vaddr_t,paddr_t}, vm_size_t -> vsize_t
1998-08-13 21:36:02 +00:00
aedf80a6e9
Oops, lots of missed vm_offset_t -> vaddr_t changes.
1998-08-13 21:20:47 +00:00
057d49dba3
Second arg of vm_map_insert() is/was a vm_object_t.
1998-08-13 21:12:15 +00:00
09efdbb42d
Oops, this got missed in the vm_offset_t -> vaddr_t change.
1998-08-13 19:15:33 +00:00
e829016cba
Keep d_ncylinders correct
1998-08-13 18:18:54 +00:00
48bf26949f
Report "true" disk geometry; like sd disks do
1998-08-13 18:16:53 +00:00
d0153a96fe
The sense of the pccons_is_console test is backwards
1998-08-13 18:00:05 +00:00
0430a2cf75
Include db_dbgregs.s for ddb
1998-08-13 17:55:41 +00:00
1ae4d7da86
Allow inb/outb and friends to be called from debugger.
...
Crude access to x86 hdw "debug" registers.
1998-08-13 17:54:15 +00:00
67390e1ee2
Make serial line debugging easier to enable and use
1998-08-13 17:41:10 +00:00
9b25897ec0
minor consistency nit: the page index into an anon object is always
...
assigned to from integer types, and it is compared to integers. So
let it be an integer instead of vsize_t.
1998-08-13 17:32:46 +00:00
523a2c670a
Make sure to turn off timeout flag when doing untimeout().
1998-08-13 15:50:57 +00:00
33a864ee58
Fix typo.
1998-08-13 15:15:28 +00:00
55491ea367
Rototill match algorithim. New scheme:
...
1. Does the function claim to be a serial port?
2. Does the function's configuration table present all four
standard ISA com port ranges?
3. Is the device in our table?
New serial devices do not need to be added to the table unless they
fail both (1) and (2).
1998-08-13 15:08:54 +00:00
a461703d7f
Use PCMCIA_FUNCTION definitions.
...
Initialize function ID in new pcmcia_function structures to
PCMCIA_FUNCTION_UNSPEC, not PCMCIA_FUNCTION_MULTIFUNCTION (0).
1998-08-13 15:03:06 +00:00
5417a1681d
Add PCMCIA_FUNCTION_* macros, for function types defined by
...
PCMCIA_CISTPL_FUNCID.
1998-08-13 15:00:02 +00:00
18b4602fd5
Add a comment regarding the broken behavior of the DAFB v7.
1998-08-13 13:45:33 +00:00
dd1665ce4b
Fix typo in SYSEX code.
1998-08-13 12:40:20 +00:00
5350df2953
Per POSIX, fail with EINVAL if advisory locking is attempted on a file type
...
that doesn't support it, rather than using a homegrown EBADF or EOPNOTSUPP.
1998-08-13 10:06:31 +00:00
bf1863d17b
Add genfs_einval(), which does the obvious thing.
1998-08-13 09:59:52 +00:00
7165d3f691
change the value of audio_prinfo.seek from u_long to u_int before it causes
...
too much damange. everything else here is the same in a 64bit vs. 32bit
world, so keep it all simple. the alpha was the only port to have any real
affect for this, and it only very recently begun to support some audio
devices so it doesn't really apply here. 1.3/alpha did not support audio..
1998-08-13 06:28:41 +00:00
0acc329dad
Remove ``#define ovbcopy bcopy''. This exists in sys/systm.h now.
1998-08-13 06:21:38 +00:00
a750861e5d
Mask interrupt by hardware register if possible.
1998-08-13 06:18:27 +00:00
f750a7d47e
device ess was listed twice
1998-08-13 04:53:18 +00:00
a2dd74ed79
Merge paddr_t changes into the main branch.
1998-08-13 02:10:37 +00:00
c987d23146
Remove some leftover fluff.
...
Make sure there is no outstanding timeout when the sequencer is closed.
1998-08-13 00:13:56 +00:00
331bfdf5a0
Fix byte order bug I accidentally introduced.
1998-08-13 00:08:53 +00:00
798cb235bc
Oops, I forgot aliases for some old names (10baseT/UTP, 10base2/BNC,
...
and 10base5/AUI).
1998-08-12 23:23:29 +00:00
94e489e277
If the autonegotiation is enabled, the PAR doesn't indicate duplex mode
...
properly! Work around this by determing current active media by taking
the highest-order common bit of our advertised capabilites and the link
partner's.
If the link partner doens't do autonegotiation, then parallel detection will
pick up the media type, which will never be full-duplex, so reading the PAR
is ok in this case.
Bug pointed out by Matthias Drochner, work-around inspired by reading
the dp83840 manual, section 3.9 (IEEE 802.3u auto-negotiation).
1998-08-12 22:41:21 +00:00
d95a6e9dec
Make a variable name reflect a register name.
1998-08-12 22:27:42 +00:00
d4a5a3d0ef
Run the shutdown hook w/ SCSI_AUTOCONF.
1998-08-12 22:15:57 +00:00
58e0098fef
Shut up after close().
1998-08-12 21:36:21 +00:00
b7dab0b3f7
Add SYSEX.
1998-08-12 21:33:43 +00:00
391ef355d5
Handle SYSEX messages.
1998-08-12 21:31:28 +00:00
651d704733
Lower buffer size.
1998-08-12 21:29:29 +00:00
981f0cd0d0
If autonegotiation is enabled in the BMSR, and the BMCR doens't claim
...
that it has completed, report "none" as the active media type.
1998-08-12 20:56:34 +00:00
thorpej