d35bd4bb23
Fix a typo that would bite if the interrupt level were wildcarded in the
...
kernel config file.
1996-01-04 00:20:19 +00:00
ac604db4dd
Add sigcode and esigcode to emul_ultrix, so that signal trampoline
...
code is set up for emul_ultrix processes.
1996-01-03 21:07:33 +00:00
22a5271164
Remove pmax/tc/tc.h; use dev/tc/tcvar.h instead.
1996-01-03 20:47:19 +00:00
659c4a2ece
arch/pmax/tc -> dev/tc, pass 1:
...
Eliminate pmax/tc/tc.h. Use dev/tc headers for pmax port. Change pmax TC
autoconfig tables to use structs (mostly) compatible with dev/tc/tcvar.h.
Move TC console search to tc.c.
1996-01-03 20:39:10 +00:00
1016f0c77a
Add dev/tc/asc.c to files.pmax, until the merger of Alpha and pmax TC drivers
...
s completed.
1996-01-03 20:33:25 +00:00
0250d4039d
Fix userid format to conform to RFC1413. Fix from der Mouse in PR1848.
1996-01-02 22:01:55 +00:00
90964d13db
Implement a suggestion from Charles; use a wrapper function before
...
leintr() to deal with das blinkenlights. Also squishes the need
for LEINTR_UNIT.
1996-01-02 21:56:21 +00:00
efb493a4e0
Back out the rint/tint hook stuff, and remove need to LEINTR_UNIT. The
...
hp300 was the last to use it.
1996-01-02 21:51:56 +00:00
c8574c59f7
Allow selection of Falcon (videl) video modes other than the mode selected
...
on startup (Thomas Gerner).
1996-01-02 20:59:20 +00:00
4e585ebdd7
Merge/Sync with 4.4lite2. This is the 4.4lite2 version with NetBSD bug
...
fixes thrown in (and an apparent pre-NetBSD fix to a hardcoded
"vmunix"). I also set the ttymsg timeout to one second (as per our
previous version), rather than the five minutes set in lite2, and made
the timeout set by a #define.
1996-01-02 17:48:41 +00:00
07c1c767ba
Merge/sync with 4.4lite2. Fixed HISTORY line for syslog.conf.5. Note
...
that the claim in the HISTORY line for syslogd.8 that it appeared in
4.3BSD is probably bogus -- I remember it being a lot older.
1996-01-02 17:41:46 +00:00
7f907c1899
Merge/sync with 4.4lite2 -- just a change in version numbers and
...
RCS id strings.
1996-01-02 17:30:27 +00:00
2e1dc487c5
Add -fno-function-cse to PICFLAGS. Without it, Very Bad Things happen
...
when ld.so is compiled with gcc 2.7.2 on the m68k. From
Niklas Hallqvist <niklas@appli.se> in PR #1557 . (Thanks, Nik, for reminding
me about this PR...)
1996-01-02 08:54:28 +00:00
7e01b868cc
It's safe to use <dev/ic/ncr5380*.h> now.
1996-01-01 22:51:26 +00:00
e9d1c5366d
ncr5380sbc attribute is now defined in sys/conf/files.
1996-01-01 22:48:55 +00:00
0e8ffc850f
"si" and "sw" actually interrupt at level 3 (which I quickly discovered
...
when porting the driver).
1996-01-01 22:46:08 +00:00
33582e90e0
"si" and "sw" now have the ncr5380sbc attribute.
1996-01-01 22:44:05 +00:00
6d6c652f18
New driver for the Sun SCSI-3 VME and 4/100-series SCSI "Weird" controllers,
...
utilizing David Jones' new MI NCR 5380 code. Ported from the sun3 ncr_si.c
and "sw" DMA code written by me.
This driver contains user-configurable "options", which can be set via the
"flags" directive in the kernel configuration file. By default, only
DMA is enabled. DMA completion interrupts and reselection may be enabled
by setting the appropriate bits with "flags". See si.c for details.
Note that DMA completion interrupts and reselection don't yet work on the
4/100 controller. I don't know why, and it's unlikely that I'll have
the opportunity to find out any time soon. DMA does work, and results
in a considerable performance increase.
DMA, DMA completion interrupts, and reslection all work on my 4/260 (VME)
system with modern SCSI-II disks.
1996-01-01 22:40:56 +00:00
1b0b2de861
Define the ncr5380sbc attribute and compile dev/ic/ncr5380sbc.c if it's used.
1996-01-01 22:27:08 +00:00
1bd3fee124
Switch to David Jones' new machine-independent NCR5380 driver. It's been
...
in use by the sun3 port for some time, and is now used by the sparc port.
1996-01-01 22:24:30 +00:00
2583d55c05
Use getrlimit() instead of vlimit(), like BSD/OS and OSF/1 do.
1996-01-01 19:40:48 +00:00
e7cf87f5dc
Add the last revision previous to the switch to the MI LANCE code of
...
hp300/dev/if_lereg.h to the standalone code; the standalone LANCE driver
for the hp300 needs it.
1996-01-01 18:10:54 +00:00
4e1c709e0c
Make tn3270 compile again, from Lennart Augustsson <augustss@cs.chalmers.se>
...
in PR #1873 .
1996-01-01 02:16:34 +00:00
1dab4709a3
Changes requested by Charles Hannum.
1995-12-31 15:05:19 +00:00
d9c6db08da
Don't declare _mcount as static, gcc will optimize it away then.
1995-12-31 12:15:58 +00:00
8eedfc4a5d
The maxwait option was accidentally placed in the "options for
...
multicast pings" section of the description.
1995-12-31 04:55:35 +00:00
3319ad7b61
XXX TEMPORARY STOP-GAP MEASURE! A 12-bit command modifier was being
...
squished into an 8-bit position in a command stream! Which one is wrong?
Changed the constant from 0x140 to 0x40, which is what ended up happening
anyhow. This exists in the old Utah sources, too! How long has this
bug existed?!
1995-12-31 04:11:42 +00:00
5dd1f4a23b
Use GCC 2.7.2 on the hp300.
1995-12-31 04:00:00 +00:00
546e2339c3
Reflect recent area code chagnes, per PR #1843 , from Andrew Carey
...
<careya@PEAK.ORG>.
1995-12-31 02:49:24 +00:00
19c3f6d999
Add another broken CD-ROM drive to The List (Chinon CDS-525), per PR #1686 .
...
From Kortelainen Mika <k125374@cs.tut.fi>.
1995-12-31 02:40:53 +00:00
6e6506db07
move amiga to gcc 2.7.2
1995-12-31 02:28:59 +00:00
5a1be463d3
explicitly mask the address value
1995-12-31 01:22:03 +00:00
34c2680a5b
Re-work the serial console support a bit; it doesn't depend on statically
...
allocated softc's now.
1995-12-31 00:27:16 +00:00
e52cfc265c
Add missing zipcode for Ames, IA, from Michael Graff, PR #1869 .
1995-12-30 23:40:20 +00:00
d987547daf
An '&' missing in splx macro; causing that sometimes didn't
...
the interrupt level get set.
1995-12-30 21:37:31 +00:00
f26be3a3d6
Fix something the switch to the MI LANCE code broke: use LE_TINT_HOOK
...
and LE_RINT_HOOK to blink the "LAN transmit" and "LAN receive" LEDs on
the front panels of 400-series machines iff the CPP symbol USELEDS is
defined in the kernel config file.
1995-12-30 21:03:02 +00:00
0df0df026b
Add hooks at the top of the tint and rint functions, conditionally called
...
if the CPP symbols LE_TINT_HOOK and LE_RINT_HOOK are defined, respectively.
The hooks are called by jumping though the sc_tint_hook and sc_rint_hook
members of the softc, and take the softc as an argument. Only ports which
need these hooks need to declare them in the softc.
1995-12-30 20:59:17 +00:00
d714597971
Don't include de.h; it doesn't exist anymore.
1995-12-30 19:42:16 +00:00
8311d1eed8
Update "core" list and fix a couple of minor typos.
1995-12-30 19:17:20 +00:00
a97de97280
Add a section called "Using online NetBSD documentation" from
...
Scott Reynolds <scottr@plexus.com> (PR #974 ), with the intent of making
it easier for new-comers to UN*X go get up-to-speed.
1995-12-30 19:07:42 +00:00
2638a723c4
Add missing zipcode for Manteca, CA. Fixes PR #934 , from Barry Books
...
<bfb@planet-texas.com>.
1995-12-30 19:00:06 +00:00
67c76ca15d
Print unconfigured card id and select code regardless of -DDEBUG.
1995-12-30 18:25:25 +00:00
5fdb76aa13
Add RCS ids.
1995-12-30 18:14:01 +00:00
11381ec353
Add a vnd(4) manual page and make vnconfig(8) reference it. Fixes
...
PR #445 .
1995-12-30 18:10:45 +00:00
6691107409
Bug (!) in vax.md causing some compilations to fail; an '$' too much.
1995-12-30 17:19:53 +00:00
0dd5a89778
fix scoping and other related problems reported in pr#1859
1995-12-30 03:32:18 +00:00
8f1fa9720d
Add $mrouted_flags to netstart and use it in rc to start mrouted in a manner
...
similar (well, identical, really) to how $routed_flags is used to start
routed.
1995-12-30 01:30:03 +00:00
1eb383737f
cleanup scoping fixes part of pr#1859 from Juergen Hannken-Illjes
1995-12-29 20:33:49 +00:00
3a89082ff4
Make this work for GCC < 2.6.
1995-12-29 18:53:01 +00:00
11c7d655d8
Correct some comments about 8-port DCM boards. (Thanks, Mike, for
...
pointing out the True Nature of The Force...)
1995-12-29 17:21:29 +00:00
thorpej