8b49b1c0b1
Set console to polling mode before calling cngetc().
1998-05-03 10:14:19 +00:00
aefae6b463
Eliminate some needless indirection through ISA DMA front-end functions.
1998-04-27 00:21:57 +00:00
ff701f8abb
Garbage-collect the DMA tag's "_cookie" member; it's not used for anything.
1998-04-26 22:37:20 +00:00
543407f7ee
use the mi header (dev/pckbc/pckbdreg.h)
1998-04-17 13:09:23 +00:00
fa82ea6398
it's mi now (dev/isa)
1998-04-17 13:06:48 +00:00
46f77d75da
Make sysbeep() use dev/isa/pcppi. (sysbeep0 at pcppi?)
...
Remove findcpuspeed() - it's useless and was commented out for a while.
1998-04-16 20:15:10 +00:00
482063559a
.y.c <sys.mk> rule fixes. Don't create a y.tab.h file unless asked for,
...
and use smarter creation of the header file.
1998-04-09 00:32:31 +00:00
0d0f2a0713
kill unnecessary (unused) definition of partab (char partab[];), which
...
caused a compiler warning with egcs.
1998-04-02 02:46:02 +00:00
e9ca6a9081
Remove conditionals on PCVT_{NET,FREE}BSD to make the source easier to
...
read.
1998-03-31 08:22:13 +00:00
1a36e9e970
Add explicit int types for egcs.
1998-03-30 06:07:40 +00:00
1fc84bbd8d
Add explicit int types for egcs, and nuke register.
1998-03-30 06:05:39 +00:00
65b1639385
Make this compile again: PCKBDCF_PORT->PCKBCPORTCF_PORT.
1998-03-24 11:37:06 +00:00
c4a9c8a96e
Allow to use pccons with the new MI keyboard controller driver.
...
This is more or less for testing (it doesn't contribute to the beauty
of the code).
1998-03-22 17:40:08 +00:00
a773a26ab1
Allow to attach the mouse driver to the new MI keyboard controller driver.
...
This should allow to use old X servers which depend on the old mouse
interface to work in the future.
XXX There can be only one attachment - either to an old console driver
or to the new pckbc driver - be configured.
1998-03-22 16:48:51 +00:00
06471a2eed
switch to non-BROKEN_INDIRECT_CONFIG
1998-03-22 12:52:03 +00:00
2ada4b4af1
Replace TS_WOPEN with t_wopen, per mail on tech-kern.
1998-03-21 04:02:47 +00:00
919340aaa5
In npxdna(), if there was an exception state in the FPU but npxproc was
...
null, the frstor would fault on a PPro. I'm pretty sure this is not
how the chip is supposed to behave, but it's easy enough to do a fninit
to throw away the exception state.
Also, some other minor changes to the documentation.
1998-03-20 20:15:14 +00:00
6356561f35
Use bus-dma functions. Also make sure that dma will not use the bounce
...
buffers (Tested & requested by Noriyuki Soda).
1998-03-16 15:48:00 +00:00
7d4b078022
print proper invalid IRQ, from Heiko Rupp in PR 5128
1998-03-09 06:20:26 +00:00
dfb1317f8a
remove some lint; from Thorsten Frueauf in PR 5085.
...
also made one implicit int declaration explicit.
1998-03-02 06:20:16 +00:00
3119a26ccd
s/CFLAGS/CPPFLAGS/
1998-03-02 06:17:29 +00:00
4e915f8681
PR/4950: Rene Hexel: Add id for Terratec EWS64 joystick
1998-02-21 13:19:14 +00:00
5e3035adb1
include <unistd.h> for optarg/optind.
1998-02-20 09:19:11 +00:00
30aa56fc66
Use M_DMAMAP where appropriate.
1998-02-11 01:37:51 +00:00
d90485202c
- add defopt's for UVM, UVMHIST and PMAP_NEW.
...
- remove unnecessary UVMHIST_DECL's.
1998-02-10 14:08:44 +00:00
29e93b8bea
add the i386 MD portions for UVM.
1998-02-06 07:21:42 +00:00
ac884fce95
Allow DELAY() to be called anytime:
...
-don't enable interrupts at the end of gettick(), restore the previous
state instead
-start timer/counter 0 from delay() if necessary
-comment out "findcpuspeed()", it would clobber the timer again, and it
is unused anyway
1998-02-05 19:59:54 +00:00
8abe76d2f0
Add offset and length parameters to bus_dmamap_sync(), used for specifiying
...
partial syncs of a DMA mapping.
1998-02-04 05:12:46 +00:00
99cc8482d1
Change the last argument of bus_dmamap_sync() from bus_dmasync_op_t to int,
...
and allow more than one synchronization operation to be specified in
a single call. Dissallow mixing of PRE and POST operations.
1998-02-04 01:57:27 +00:00
a7c5c1ef3c
Add dm_mapsize to bus_dmamap_t and rename BUS_DMAMEM_NOSYNC to
...
BUS_DMA_COHERENT.
1998-02-04 00:32:55 +00:00
a963fe5864
Store the initial NPX control word appropriate for the emulation in the saved
...
FPU state, and use it when initializing the FPU on demand.
1998-01-24 13:19:46 +00:00
22c1670658
Some rearrangement of the startup code:
...
* Move some of the memory bootstrapping and the DDB startup earlier.
* Always put the IDT and the initial GDT and LDT in a separate page.
* Various minor changes.
1998-01-23 00:44:02 +00:00
c654cd6a87
Fix a bogon that flared up when XSERVER was defopted.
1998-01-22 20:55:48 +00:00
dd4cb910db
Generate dependenices on the XSERVER option.
1998-01-22 01:16:23 +00:00
32d94859ea
adapt to changed <dev/ic/i8042reg.h>
1998-01-18 14:45:10 +00:00
cf591e644b
Generate dependencies on the VM86 option.
1998-01-15 22:25:52 +00:00
1f93872e5c
Kludge around i/o port overlap w/ the "wdc" driver.
1998-01-15 06:11:55 +00:00
36760d9d94
Update for changes to config.
1998-01-12 18:59:04 +00:00
59ea23516a
Increase delays to the required 7us.
1998-01-09 21:28:32 +00:00
61475326e0
Add delays for lame keyboard controllers, as in the keyboard driver. Do a
...
better job of flushing input in various cases.
1997-12-18 16:49:10 +00:00
718221a852
fix format string in FD_DEBUG printf(); from Eric Haszlakiewicz in PR 4692
1997-12-16 07:35:45 +00:00
fbe83dc02d
Install "pcvt_ioctl.h" by normal "make includes".
1997-12-10 14:14:21 +00:00
d25c266af2
Use malloc()/free() for the temporary buffer, not geteblk()/brelse().
1997-12-07 16:06:21 +00:00
6e39ad36a6
In pccngetc(), don't treat cn_tab->cn_dev as a valid device number until
...
it's initialized.
1997-12-07 06:20:44 +00:00
37d9430628
add ID for (brain-damaged) GUS PnP, and add comments describing what
...
hardware each ID describes.
1997-11-20 06:23:52 +00:00
ee5628ee52
Add another PnP id.
1997-11-18 11:31:07 +00:00
af27f4e9b5
PR/4506: Andreas Gustafsson: Finnish keyboard mapping for pccons.
1997-11-16 22:05:48 +00:00
0963ca7386
Minor change.
1997-11-16 12:31:00 +00:00
d7107be1c9
Fix a condition where we might keep interrupts blocked while servicing a soft
...
interrupt.
Fixes serial port silo overflow problems.
1997-11-16 12:30:00 +00:00
2030b7b104
Turn off reseting and disabling the device by default.
...
Document the option to turn them back on.
1997-11-15 20:18:50 +00:00
drochner