72f73e6846
Add CUBIETRUCK
2014-09-10 05:03:50 +00:00
c170a85cb4
Add BPI to the list of kernels to build.
2014-09-07 20:17:57 +00:00
3515fb1d7c
Initial commit of support for Kobo touch. (i.MX507 or i.MX508)
...
(http://www.kobo.com )
2014-07-25 11:22:50 +00:00
880ecf60c1
Update list of kernels
2014-03-30 16:00:48 +00:00
cf5baf63ad
modified NetWalker kernel config
...
* add ARM_HAS_VBAR, FPU_VFP etc.
2014-03-07 12:35:14 +00:00
4e82be1a79
Add BE version of cubieboard. Plus hf too. And hf for BCM5301X.
2014-03-01 01:51:01 +00:00
a50628ca37
Add CUBIEBOARD
2013-09-08 16:34:06 +00:00
3c46e5578f
if softfloat, Install a ld.so.conf to use libc_vfp.so if there is a VFP on
...
evbarm (no other arm ports a CPU supporting VFP).
2013-08-19 16:34:29 +00:00
fbfe999cbc
Instead of trying to pass two kernels to beagleboard.conf, pass one and
...
derive the path to the second from the first.
2013-08-19 04:27:22 +00:00
0b185da1b6
Try to pick up the right location for BEAGLEBONE and BEAGLEBOARD kernels.
2013-08-17 13:08:16 +00:00
8bf9d972aa
fix another typo
2013-08-07 20:57:22 +00:00
5878e8510d
Fix a typo
2013-08-07 06:09:32 +00:00
103be4d547
Need to separate BE MACHINE_ARCH so that armv7 can be excluded.
2013-08-06 17:53:55 +00:00
7732e16eb9
Simply and deal with all the various earm MACHINE_ARCH variants
2013-08-06 05:57:37 +00:00
a78ff5d27c
Use TOOL_GZIP in mkimage, and pass the TOOL_GZIP into it.
2013-06-16 13:47:42 +00:00
cb2a012804
Add spiflash device to MAKEDEV template and MAKEDEV config on evbarm.
...
Obtained from Marvell, Semihalf.
2013-04-20 11:41:51 +00:00
6d5c5ede57
create audio devices
2013-03-24 14:03:54 +00:00
aa6ebcd0e2
Add KUROBOX_PRO as an EVBARM_BOARDS member.
2013-03-23 11:51:47 +00:00
77e3515ae2
fix ALL_KERNELS handling
2013-03-21 15:16:43 +00:00
4daade7385
Add a new installer image for Raspberry PI to evbarm
...
Includes the following major changes:
1) Add new configmenu item to sysinst to allow creation of users at
post-install time.
2) Add an sshramdisk type to evbarm, which is a ramdisk with sshd
enabled, allowing users to install on a headless PI by sshing to the
device with the account "sysinst" password "netbsd" to begin the
installation. (Note, neither the account, nor the ssh setup are copied to
the finalized installation image)
3) Change mkimage to build a boot-only image, without the root filesystems.
Much of the sshramdisk code could be reused on other ports easily.
2013-03-19 22:16:52 +00:00
b36c60d9c0
Handle ALL_KERNELS selection
2013-03-17 12:19:57 +00:00
12a7d7c6ad
create /dev/vchiq
2013-03-08 12:33:25 +00:00
93170f635e
Use HOST_SH to run scripts. Makes mkimage work on SunOS.
2013-02-21 15:13:10 +00:00
178a6ef2ca
Move INTEGRATOR_CP from EVBARM_BOARDS to KERNEL_SETS so an
...
INTEGRATOR_CP_INSTALL kernel isn't required.
2013-02-20 09:03:41 +00:00
5c97965224
Add support for the ARM Integrator/CP from Sergio López.
...
The code hasn't been tested on real hardware, but INTEGRATOR_CP config
is useful for QEMU which supports it.
2013-02-19 10:57:09 +00:00
87aeb26f19
Avoid //
2013-02-13 04:22:36 +00:00
73e86066b1
fix output filename for __mkimage macro
2013-02-10 22:03:49 +00:00
85a061f852
fix rpi kernel path, defer image building until after release target is done
2013-02-10 21:36:31 +00:00
fd70e2e194
avoid dup kernel
2013-02-10 20:25:56 +00:00
6975538bda
add beagleboard
2013-02-10 16:40:21 +00:00
158210c439
pass more tools down.
2013-02-10 14:26:32 +00:00
96add05603
Follow a different approach to install the kernel and compress the image.
2013-02-10 01:24:40 +00:00
f73dde4fda
get the kernel from the release directory.
2013-02-09 20:47:06 +00:00
02bfcabc8d
merge back changes I undid
2013-02-09 18:59:19 +00:00
8070b25e81
hook image building for rpi.
2013-02-09 18:49:55 +00:00
6c17c16f94
build the armv5t, armv6 and armv7 kernels for earm but only the v6 and v7
...
for earmhf.
2013-02-06 01:31:55 +00:00
2947c6f2d5
Add earmhf support
2013-02-05 07:34:07 +00:00
5c014ba1cf
Create a plcom0 device node for RaspberryPI
2013-01-10 13:38:37 +00:00
d5c3f2d0b1
Add the next three /dev/pci nodes.
...
Marvell Orion already exposes two.
2012-10-13 01:13:59 +00:00
9ee81fc63b
- Add OPENRD.
...
- Compile BEAGLEBOARD_INSTALL.
2012-09-17 15:37:33 +00:00
982f691177
Add BCM5301X
2012-09-01 02:03:35 +00:00
47aef1fbf4
Add lots more ldN dkN
...
Add drvctl to md
2012-09-01 01:45:17 +00:00
7e916bb8a9
Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
...
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.
2012-08-16 13:31:24 +00:00
127e888ae2
Add earm/earmeb changes
2012-08-06 07:51:13 +00:00
ba9c08beed
Add ub to KERNEL_SUFFIXES.
2012-08-03 09:11:31 +00:00
b6cf8ec026
Add RPI to KERNEL_SETS
2012-07-26 20:50:44 +00:00
c2e51849fc
Per discussion on tech-userlevel, finally fix PR 10127:
...
move all ttyE* entries that use "vt100" emulation to wsvt25 term type.
The terminfo vt220 entry lacked (correctly) a delete key entry, which
was a regression against the netbsd-5 termcap entry. On the other hand,
only a very small number of foreign systems lacks support for wsvt25
nowadays.
2012-06-13 20:49:11 +00:00
8205b4eb47
Bump MV2120 SYMTAB_SPACE.
...
Add kernels variants for root on the primary partitions of "Drive 1".
Add MV2120 to evbarm release.
2012-02-14 15:09:02 +00:00
2c31d574e0
add the missing backslash.
2012-01-30 09:48:11 +00:00
77b78cdcff
Add FriendlyARM Mini2440 support.
...
- new code for Samsung S3C2440 SoC.
- update for other S3C2xx0.
This port was done by Paul Fleischer.
2012-01-30 03:28:33 +00:00
matt