Commit Graph

3674 Commits

Author SHA1 Message Date
mycroft cc84859459 Map the EISA registers correctly! 1998-08-15 02:30:56 +00:00
mycroft 196dfd7597 Always map the EISA configuration registers. 1998-08-15 02:26:31 +00:00
thorpej e9c5407d64 Only map the amount of space the device actually occupies.
Part of PR #5279, Martin Musemann.
1998-08-15 01:59:25 +00:00
thorpej 93eb06f9f2 Don't bother with the num_memspace check. It makes some otherwise-working
cards (e.g. Xircom CM33) fail needlessly.

From Jan van Doorn <jdoorn@nc.com>, PR #5580.
1998-08-15 01:41:31 +00:00
thorpej 582d4a7856 Should not use SCSI_POLL if the system is not cold. 1998-08-15 01:32:55 +00:00
thorpej 9646d7f100 Add support for the D-Link DE-660. From Tero Kivinen <kivinen@ssh.fi>,
PR #5691.
1998-08-15 01:20:05 +00:00
thorpej 7ea79f1cb2 Regen. 1998-08-15 01:18:06 +00:00
thorpej be8a202a21 Add the D-Link DE-660. From Tero Kivinen <kivinen@ssh.fi>, PR #5691. 1998-08-15 01:17:51 +00:00
thorpej b3b533c44d Keep track if the disk has had done i/o, making it dirty. On last close,
or at shutdown, flush the cache if the disk is still dirty and it support
cache flushing.  Fixes PRs #5588 (Jim Bernard) and #5589 (Justin Gibbs).
1998-08-15 01:10:54 +00:00
thorpej 1f4b4ceda6 Add support for the NewMedia BASICS Ethernet. Device info provided by
Stefan Grefen in PR #5902.
1998-08-14 23:31:22 +00:00
thorpej 5fa0fd5087 Regen. 1998-08-14 22:59:54 +00:00
thorpej 924090ec6d Add vendor ID for NewMedia Corporation, and product ID for NewMedia
BASICS Ethernet.  From Stefan Grefen, PR 5902.
1998-08-14 22:59:35 +00:00
drochner cea8e0a23f explicitely select the master before trying to access its registers 1998-08-14 20:39:04 +00:00
drochner a8d0a43ffa 2 changes to pciide_probe_wdc() (used in compatibility mode to check
if i drive is responding):
-if the reset succeeds, check some registers to make sure there is really
 a drive (and not a chipset which echoes back the last written value)
-explicitely select the master before trying to read the master's status
1998-08-14 20:35:40 +00:00
mycroft 183442fe73 Emulate ulinear_be using slinear_be on later chips. 1998-08-14 00:49:23 +00:00
thorpej ae8bdb1e72 Make sure CIMDIS is set and FLINK is clear in the PCR. 1998-08-14 00:23:26 +00:00
rvb 48bf26949f Report "true" disk geometry; like sd disks do 1998-08-13 18:16:53 +00:00
augustss 523a2c670a Make sure to turn off timeout flag when doing untimeout(). 1998-08-13 15:50:57 +00:00
nathanw 55491ea367 Rototill match algorithim. New scheme:
1. Does the function claim to be a serial port?
2. Does the function's configuration table present all four
   standard ISA com port ranges?
3. Is the device in our table?

New serial devices do not need to be added to the table unless they
fail both (1) and (2).
1998-08-13 15:08:54 +00:00
nathanw a461703d7f Use PCMCIA_FUNCTION definitions.
Initialize function ID in new pcmcia_function structures to
PCMCIA_FUNCTION_UNSPEC, not PCMCIA_FUNCTION_MULTIFUNCTION (0).
1998-08-13 15:03:06 +00:00
nathanw 5417a1681d Add PCMCIA_FUNCTION_* macros, for function types defined by
PCMCIA_CISTPL_FUNCID.
1998-08-13 15:00:02 +00:00
augustss dd1665ce4b Fix typo in SYSEX code. 1998-08-13 12:40:20 +00:00
kim f750a7d47e device ess was listed twice 1998-08-13 04:53:18 +00:00
eeh a2dd74ed79 Merge paddr_t changes into the main branch. 1998-08-13 02:10:37 +00:00
augustss c987d23146 Remove some leftover fluff.
Make sure there is no outstanding timeout when the sequencer is closed.
1998-08-13 00:13:56 +00:00
thorpej 94e489e277 If the autonegotiation is enabled, the PAR doesn't indicate duplex mode
properly!  Work around this by determing current active media by taking
the highest-order common bit of our advertised capabilites and the link
partner's.

If the link partner doens't do autonegotiation, then parallel detection will
pick up the media type, which will never be full-duplex, so reading the PAR
is ok in this case.

Bug pointed out by Matthias Drochner, work-around inspired by reading
the dp83840 manual, section 3.9 (IEEE 802.3u auto-negotiation).
1998-08-12 22:41:21 +00:00
thorpej d95a6e9dec Make a variable name reflect a register name. 1998-08-12 22:27:42 +00:00
thorpej d4a5a3d0ef Run the shutdown hook w/ SCSI_AUTOCONF. 1998-08-12 22:15:57 +00:00
augustss 58e0098fef Shut up after close(). 1998-08-12 21:36:21 +00:00
augustss 391ef355d5 Handle SYSEX messages. 1998-08-12 21:31:28 +00:00
augustss 651d704733 Lower buffer size. 1998-08-12 21:29:29 +00:00
thorpej 981f0cd0d0 If autonegotiation is enabled in the BMSR, and the BMCR doens't claim
that it has completed, report "none" as the active media type.
1998-08-12 20:56:34 +00:00
thorpej a24f6f77bf Ugh, don't print out "autonegotiation failed to complete" if it did.
We get these once a second if we're in auto mode, the interface is up,
and there's no carrier.
1998-08-12 20:46:47 +00:00
drochner 3292aee22b Separate special character handling from normal output so that they
are obeyed even during an escape sequence.
This is how the original VT100 behaves.
1998-08-12 20:09:47 +00:00
drochner 8e12b6c020 stricter parameter check for scrolling regions
(PR kern/5954 by Dave Huang <khym@bga.com>)
1998-08-12 20:04:12 +00:00
scottr c587bae132 Nit: space -> tab conversion. No functional change. 1998-08-12 19:16:24 +00:00
mycroft 5c76b6a944 The mic preamp is really a property of the input stage, and affects both
pass-through and recording.
1998-08-12 19:13:14 +00:00
mycroft a5ace63ee2 Associate the preamp with the mic volume in the input class. 1998-08-12 19:09:55 +00:00
mycroft 916c60de3e Oops; fix typos. 1998-08-12 18:55:03 +00:00
thorpej b170caf730 Completely rewrite media selection. Add support for the MII/PHY on
the 3Com 3c905-TX and 3c905-T4.  Fix handling of the MII on the
3c595-MII and 3c597-MII (can't talk to the PHYs on these cards; just
use "manual" for the external MII port).

Fixes kern/4782 (Chris Demetriou).
1998-08-12 18:51:52 +00:00
mycroft a2f1d5b822 Add a knob to enable/disable the mic preamp. 1998-08-12 18:47:43 +00:00
augustss fa39959a5e Add a MIDI driver for the PC speaker. This is mostly of hack value,
but, hey, lotsa people got a MIDI device now!  (A truly pitiful one. :-)
1998-08-12 18:16:36 +00:00
augustss 881b4053a6 Remove some white space. 1998-08-12 18:15:04 +00:00
augustss 50ab480a8c Add a layer to handle emulation of MIDI for synthesizers.
It handles decoding of MIDI commands, voice allocation, and translation
it notes to frequencies.
1998-08-12 18:14:01 +00:00
augustss 27c5df27d1 Tidy up and rename some functions in the MIDI driver. 1998-08-12 18:11:53 +00:00
thorpej 5bec554354 Driver for the 3Com internal PHY, found on 3c905B-TX cards (and maybe
some 3c905-TX?).  Partially from Frank van der Linden.
1998-08-12 08:46:20 +00:00
scottr 53907fe5a1 Support Cabletron Ethernet card, from John Marohn in PR 5762. 1998-08-12 07:19:09 +00:00
mycroft 3979b06d00 enhanced -> preamp 1998-08-12 03:18:34 +00:00
mjacob 5ad5bb35af minor change to make the message less linux like 1998-08-12 00:03:23 +00:00
matthias 1f5c14d8ef ess_audio_channel:active is now used even when DIAGNOSTICS is not defined. 1998-08-11 12:16:22 +00:00