cb37e264d2
Need <sys/device.h> to bring configure() declaration in scope.
1998-11-24 16:48:26 +00:00
49837f8763
Remove NOPIC= on powerpc.
1998-11-24 15:24:53 +00:00
dee282eb12
You also need intr.h, psl.h, pte.h and vmparam.h to build the world...
1998-11-24 15:16:48 +00:00
d40f376b56
Implement BUFCACHE option as suggested by lukem.
1998-11-24 15:07:33 +00:00
a3f9798019
Make compile with -DDEBUG
1998-11-24 15:05:53 +00:00
f65666430f
Pull-in device.h for configure() prototype.
1998-11-24 15:03:31 +00:00
94696a9ac3
Add support for the BUFCACHE config option.
1998-11-24 13:19:48 +00:00
993fb9ff04
add some missing comment ends.
1998-11-24 13:18:42 +00:00
d4fb975471
bring a prom_printf prototype into scope.
1998-11-24 13:02:59 +00:00
ed2db65750
add WARNS=0 for now.
1998-11-24 12:56:55 +00:00
7ad164b566
use rm -f. this makefile needs to be fixed..
1998-11-24 12:56:40 +00:00
4e85f6d151
remove fixalign prototype, it is now elsewhere
1998-11-24 12:55:56 +00:00
0a61098abd
remove some dead variables.
1998-11-24 12:55:25 +00:00
1458c370fc
#if 0 pv_syncflags as it is not used. avoid comments in comments.
1998-11-24 12:55:06 +00:00
7fa9d2a08d
move now unsed variable under #ifdef NOT_DEBUG
1998-11-24 12:53:27 +00:00
06dfd0f985
#if 0 an unused declaration
1998-11-24 12:51:19 +00:00
0bd7e232e2
do not start comments inside comments.
1998-11-24 12:50:56 +00:00
0a3c644dbc
include db_interface.h, remove unused variable & add proto for db_uvmhistdump.
1998-11-24 12:50:27 +00:00
b066708a2e
add protos for switchtoctx, fixalign and emulinstr. XXX should all these be here?
1998-11-24 12:49:14 +00:00
5711320263
these are fpu_xitof & fpu_ftoxi in the code...
1998-11-24 12:48:14 +00:00
12f8528ba4
add a cast.
1998-11-24 12:47:24 +00:00
775e7035f4
Add powerpc support.
1998-11-24 11:34:30 +00:00
ac7d3e6487
Add PIC definitions.
1998-11-24 11:17:17 +00:00
51f785d57d
Compile with -fPIC.
1998-11-24 11:16:11 +00:00
106908bdb8
Add PIC version.
1998-11-24 11:14:54 +00:00
0298a4dd05
Use __arm32__, not arm32, for egcs.
1998-11-24 09:25:30 +00:00
15f2f5d901
Take emulated button state into account before handing off mouse events.
...
Fixes part of PR 6444. Tested by Frederick Bruckman (fb@enteract.com ).
1998-11-24 08:34:37 +00:00
f917584d54
Add more delay in adb_reinit().
1998-11-24 08:26:50 +00:00
0a67f72c26
uncommented the "intrnames" definitions used by vmstat to
...
label interrupt counts.
1998-11-24 07:02:10 +00:00
0af8906658
Remove script about installboot.
1998-11-24 06:40:30 +00:00
28c9fd0c8c
Fix no check for negative offset in mmap.
1998-11-24 06:34:10 +00:00
efccda2e04
Needs <string.h>
1998-11-24 06:06:31 +00:00
096af13560
Needs an LP64 fix plus a <string.h>
1998-11-24 06:06:10 +00:00
a19fc46ab9
Needs <string.h>
1998-11-24 06:05:34 +00:00
0cb059b1db
Incorrect void * casts on ns_panic() calls...LP64 warnings...kill kill kill
1998-11-24 06:05:07 +00:00
40ed59e2df
Needs <string.h>
1998-11-24 06:00:30 +00:00
dcd677e28b
slight cleanup
1998-11-24 02:49:13 +00:00
2d1bb4511d
Allow port number for the server to be specified ("-h server:port").
...
This makes it possible to query rwhois servers at non-standard ports.
1998-11-24 01:33:47 +00:00
3660a1e953
make sure we do not write more than 7.5k of bootblock.
1998-11-24 00:03:19 +00:00
2e09168cb1
Implement a new command: "checkpower". Returns the current power management
...
mode of an ATA device.
1998-11-23 23:02:58 +00:00
1f676cda09
Implement the AT_READREG flag. This is needed for the CHECK POWER MODE
...
ATA command (among others).
1998-11-23 23:02:11 +00:00
48f2e0ae6c
Add a new flag to wdc_command: ATA_READREG. This will indicate that all
...
device registers should be read back into the wdc_command structure after
successfull command completion. Use this this in wdioctl() for
ATAIOCCOMMAND.
1998-11-23 23:00:26 +00:00
42d7790133
Add a new flag: ATACMD_READREG
1998-11-23 22:58:23 +00:00
4cb534cca1
added 82443BX_AGP_NOT as per kern/5847
1998-11-23 22:54:02 +00:00
f0559087e0
Changes to deal with mac serial ports having clock sources on DCD or CTS.
...
- When doing a first open, don't enable receive & status interupts before
the MD layer has had a chance to set things up.
- Enable logic to only enable DCD/CTS interupts if we are looking for/
expecting interupts on those pins. Disable otherwise.
- in zs_param, only pass up the state of ZSRR0_DCD if we have enabled
interupts on that pin.
Henry Hotz (<hotz@jpl.nasa.gov>) and Greg walsh <gwalsh@artec.com> have
tried these changes to get certain printers from hanging at boot. They
work in a 1.3.2 kernel for Greg.
1998-11-23 22:10:09 +00:00
3ebca7fd4e
regen
1998-11-23 20:49:20 +00:00
bb7d20f01a
add adaptec aha attachment
1998-11-23 20:48:34 +00:00
f2bd402051
add adaptec aha attachment.
1998-11-23 20:47:51 +00:00
1eebc10d76
add aha at isapnp?
1998-11-23 20:47:03 +00:00
6861b95582
Get rid of memset() prototype, it's not used and egcs doesn't like it.
1998-11-23 20:45:26 +00:00
kleink