aad6e71194
Prototype for sunos_sendsig().
1996-05-05 06:43:33 +00:00
37163421a3
Prototype for -Wall -Wstrict-prototypes -Wmissing-prototypes -Wno-uninitialized
...
Also change the device probing scheme to use something a bit more rational.
A current side-effect is that nubus cards are double-mapped. I expect
to fix that shortly.
Also change splclock() to block everything but serial hardware interrupts.
1996-05-05 06:15:56 +00:00
b2af0c2297
Kill unused variables and fix prototypes.
1996-04-30 18:11:38 +00:00
b50e8aab63
- Drop SCSI IRQ interrupts if we are already handling one. This works around
...
a condition that occurs with some slow SCSI devices when they disconnect
(e.g. the AppleCD 600), generating spurious selection interrupts.
- Reorganize the debugging code slightly.
1996-04-30 17:07:17 +00:00
5e7380a531
Remove trash left from a merge (probably really my fault).
1996-04-29 21:36:17 +00:00
340e30dfbb
shuffle some and change rd to pseudo-device.
1996-04-28 19:18:42 +00:00
eb335437e2
Ooops. ncr_sbcreg.h -> sbcreg.h
1996-04-25 23:47:06 +00:00
90b5a113d9
Renamed the sbc driver files
1996-04-25 22:30:10 +00:00
aca6a2e6da
Renamed these files.
1996-04-25 22:26:52 +00:00
95101e1310
Renamed these files.
1996-04-25 22:02:58 +00:00
a0bca74134
Remove some now-useless code.
1996-04-25 21:18:04 +00:00
18fd76201e
We don't need to enforce the MAX_DMA_SIZE limit in dma_alloc();
...
this is handled properly by sbc_drq_intr() already.
1996-04-25 14:40:26 +00:00
2e936aa8ff
- Remove several hacks that didn't do much but waste cycles.
...
- Disable interrupt-driven PDMA when writing (use polled PDMA instead).
- Be more careful about when to flag a transfer as completed.
The result of these changes is that interrupt-driven PDMA works well
enough to bring the system up.
1996-04-25 06:18:41 +00:00
424ce7590a
Sync with prototype changes
1996-04-24 18:02:26 +00:00
27c9c12e72
Clean up sbc_drq_intr() a bit; also, be more paranoid about size of transfer.
1996-04-23 14:20:28 +00:00
509ace1016
Handle internal video interrupts on RBV-based machines differently so
...
that Ethernet cards have a chance to work. In particular, this change
has been tested on the IIci, IIsi, and LCIII. The crucial info behind
this code was the result of a lot of work by Julian Bean.
1996-04-23 03:53:26 +00:00
ff35ddbb2a
Update makeoptions to include 881 support
1996-04-13 19:12:46 +00:00
da3dabc052
Add PPP_BSDCOMP and PPP_DEFLATE options.
1996-04-08 14:17:28 +00:00
9d1cd5e9be
Make this compile again; will need to deal with matchbyname() later, though.
1996-04-04 06:59:29 +00:00
c1c09c75e2
Add v2IRQ0 define for IIci-style internal video.
1996-04-04 06:55:29 +00:00
83f9bdc359
update for the fact that config_found() and config_rootfound() now
...
return pointers. (Check vs. NULL, rather than just boolean tests.)
1996-04-04 06:25:00 +00:00
7bc2baeb01
update for the fact that 'alldevs' is now a TAILQ.
1996-04-04 00:27:24 +00:00
bbb6251b0b
Make CLK_INTERVAL depend on HZ; update comments to match.
1996-04-01 05:16:52 +00:00
5f20924433
Move the I/O map kludge for II-class machines into the MRG init code. No
...
effective change, but this is more correct and averts some potential
problems.
1996-04-01 04:30:23 +00:00
1fa595a2f1
Clean up for higher warning level.
1996-04-01 01:35:48 +00:00
8b3fdd9943
Make this compile again by including <sys/types.h>
1996-03-31 14:21:03 +00:00
933d138841
Change %r -> %: as for recursive printf's
1996-03-30 21:01:21 +00:00
8326aadde5
via.h -> machine/viareg.h.
1996-03-29 02:27:42 +00:00
b39b4939fc
Fix minor oversight in a sanity check--caught by Jason, I think, and reported
...
by Scott.
1996-03-29 02:12:41 +00:00
08126b5bec
via.h -> machine/viareg.h.
1996-03-29 02:06:04 +00:00
fdcac3b557
via.h -> machine/viareg.h and some other prototyping fixes.
1996-03-29 02:00:38 +00:00
360590468a
Remove bogus reference to BSDSRCDIR here; still doesn't work, though.
1996-03-27 03:56:22 +00:00
b329936803
Fix for more pedantic -W options.
1996-03-25 03:27:51 +00:00
2422f1bc4e
Get rid of a compiler warning about Debugger();
1996-03-24 16:58:46 +00:00
ecd20bc823
Add PPP compression options
1996-03-23 06:12:11 +00:00
32a38f24e7
DEBUG -> SBC_DEBUG, and fix comment regarding sbc_options
1996-03-21 04:49:20 +00:00
0b59005d3d
Fix a long-standing bug uncovered by the new device attachment
...
model. Thanks to Jason Thorpe for the fix (fixed PR 2235).
1996-03-20 05:10:54 +00:00
2d7b856ea6
Update to NetBSD 1.1B struct cfdriver naming conventions.
1996-03-18 06:52:54 +00:00
82d914d090
New device attachment scheme:
...
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
1996-03-17 01:26:49 +00:00
ab0e60a42f
fdopen -> filedescopen
1996-03-14 21:20:59 +00:00
2a5cf25e29
Back out previous change; kernel longjmp() has 1 arg.
1996-03-14 16:42:44 +00:00
24dcca72bd
Optimize user-side TLB invalidation when !defined(M68020).
1996-03-14 05:50:06 +00:00
b4225290a4
Use 851-specific instructions only #if defined(M68020).
1996-03-12 23:46:32 +00:00
6208752b50
Oops; fix typo.
1996-03-12 21:34:57 +00:00
d504ec531e
Add "options M68020" so that 68851-specific code is only compiled when
...
we want it (we don't support the 020 without an 851 anyway). Note that
M68030 no longer implies support for 020+851.
This also allows us to compile with -m68030 iff M68020 isn't specified
in the config file.
1996-03-12 21:06:22 +00:00
89f7d665d5
KNF.
1996-03-12 19:18:49 +00:00
04de5b5b08
Back out the previous change; we'll trust adjustments to the clock
...
except on shutdown.
1996-03-12 04:34:46 +00:00
e11f39f4a9
Don't sync the RTC at shutdown time.
1996-03-12 04:24:47 +00:00
9e087f0d26
Pass 2nd arg to longjmp--even though it's ignored.
1996-03-10 19:55:22 +00:00
679b7627d0
Use label_t instead of jmp_buf and don't include setjmp.h.
1996-03-10 19:54:41 +00:00
1c817d1c3c
Fix a typo in last.
1996-03-07 20:47:01 +00:00
6da2ce259c
Allow for a machine dependent match function - rd_match_hook()
1996-03-07 10:25:28 +00:00
ddfeeb8c2d
Add option to try linked commands on all devices for PUMA.
1996-03-07 02:48:33 +00:00
7c44b1180f
Disable SCSI linked commands, but allow kernel option to override.
1996-03-07 02:26:37 +00:00
d504670861
Fix for serial console handling from Bill Studenmund.
1996-03-06 23:22:41 +00:00
18ec26aa21
add _MACHINE and _MACHINE_ARCH, which are like MACHINE and MACHINE_ARCH,
...
execpt without quotes. meant to be __CONCAT()ted for easy #includes
of machine-dependent headers for MI code (e.g. for the MI ISA/EISA/PCI/TC
bus code).
1996-03-04 05:04:10 +00:00
3d67685d36
Do not build vnode_if.[ch] for each kernel. Build them once, like the
...
various syscall sources/headers, and just compile them. From PR 2142, OK'd
by mycroft.
1996-02-29 20:54:58 +00:00
883ff3e7f3
Changes from Walter Ruetten for P550 support.
1996-02-28 04:14:05 +00:00
92c6f5f0ee
Get rid of some unneeded constants.
1996-02-27 03:29:16 +00:00
6ec37fa3df
Use IOBase instead of INTIOBASE.
1996-02-27 03:25:47 +00:00
db2f33c640
Clean out some unneeded constants.
1996-02-27 03:23:42 +00:00
1dcd5f9d15
For a bus error in nofault, if it's an 040, load the address from the
...
correct frame offset. This is required for the 5380 driver to work
properly.
1996-02-27 03:17:00 +00:00
2ce52ae489
Define build programs with `?=', so they can be overridden with `makeoptions'.
1996-02-26 02:53:20 +00:00
568f862aeb
PR 2111: Do not update system clock until we can keep more accurate time.
1996-02-23 12:40:37 +00:00
738faf922f
Add ^^ and ^_ codes to default keyboard layout
1996-02-23 05:43:48 +00:00
946696f064
Add m68k/db_memrw.c
1996-02-22 23:35:07 +00:00
a7daa2d931
- Clean up DEBUG code.
...
- Setting the "monitor BSY" flag for polled PDMA is non-optimal. The
polled requests generate an interrupt that isn't serviced until the
command has been cleared from the queue.
1996-02-22 14:31:26 +00:00
89179744bd
Use unsigned variables to calibrate delay_factor.
1996-02-22 02:04:14 +00:00
5fd93a11ca
Clear interrupt before enabling in calibrate_delay() (from John P. Wittkoski)
1996-02-19 21:40:48 +00:00
8fe7b2bbb7
Be a bit more careful when setting up the timer for calibrating delay().
1996-02-19 05:20:54 +00:00
ab3f741911
Update to latest Atari driver, but with some local modifications.
1996-02-19 02:51:03 +00:00
2efbb04ae0
Make delay() match prototype.
1996-02-17 19:23:03 +00:00
f851e3e8b3
Move spl stuff from param.h to psl.h. Prototype delay() in param.h.
1996-02-17 14:50:40 +00:00
946dc72362
Get d_npartitions right.
1996-02-14 14:20:54 +00:00
ef9b75f679
HZ used to be in Makefile.mac68k... It is 60 on the mac, not 100.
1996-02-14 04:26:38 +00:00
9401e46ed0
Change readdisklabel to check block 0 of the disk for a Macintosh magic
...
number before attempting to load the Macintosh partition info. If the
first 32-bits of block 0 contain the BSD disklable magic number, treat
it as a NetBSD disklabel.
When loading the Macintosh partition map, check the first 32 partitions
for the root, usr, and swap partitions--instead of the first 8. Still
only allows 8 total partitions for NetBSD use.
1996-02-11 22:31:47 +00:00
d03a91c75f
KNF-ified by Scott Reynolds a long time ago.
1996-02-11 15:23:19 +00:00
4323ae0307
Remove via_inited, as it is unused.
1996-02-11 01:20:46 +00:00
6945798b81
Correct ROM vectors for the LC 475.
1996-02-11 01:20:37 +00:00
ffc19f58b0
Back out last change. Bad karma to initialize the VIA that early.
1996-02-11 01:20:23 +00:00
0ae8a51904
PETE was pretty useless; SPOT is my own machine, and will better
...
reflect the status of sbc driver configuration.
1996-02-11 00:17:13 +00:00
af4f29bcb3
Identical to GENERIC, but uses the `sbc' driver.
1996-02-10 23:42:31 +00:00
ed73ac3b48
New SCSI driver for Macintosh II family machines, implemented using
...
the MI 5380 driver. It has been verified to work on the IIx, IIsi,
and IIci only, but should work with any Macintosh 5380-based SCSI
controller.
- This driver is _not_ intended to be a general purpose replacement
for the `ncrscsi' driver. It is an alternative for those having
problems with that driver.
- Disconnect/reselect doesn't (yet) work, so don't expect SCSI tape
or magneto-optical disk drives to function properly.
1996-02-10 23:28:41 +00:00
01c43471b9
Make a message more verbose for folks who try to boot in 24-bit mode.
1996-02-10 23:12:46 +00:00
753fe3a25a
Fix mkdep problems due to missing flags.
1996-02-09 02:21:13 +00:00
3c8605f0f7
Add sbc driver.
1996-02-07 16:34:28 +00:00
2c8314f73c
vm prototype changes
1996-02-05 02:06:38 +00:00
2a878c9a3a
Move debugging defines, etc. into mac68k5380.c and use them instead of
...
something similar but different. Make a few cosmetic changes.
1996-02-03 23:17:53 +00:00
3d8d566948
New delay() implementation from Scott Reynolds (scottr@edsi.org).
...
Also some minor rearranging of the VIA initialization (init earlier).
1996-02-03 22:50:22 +00:00
6b6a46ed2f
Implement mac68k_register_via1_t1_irq(). Also, remove via_inited warning.
1996-02-03 22:50:19 +00:00
d13a039f24
New delay() implementation from Scott Reynolds (scottr@edsi.org).
...
Also some minor rearranging of the VIA initialization (init earlier).
1996-02-03 22:49:52 +00:00
20123d5253
O2 breaks on this port. Use -O until we can fix it.
1996-02-03 15:14:39 +00:00
5bc076e17e
Use `-traditional-cpp' when building .s and .S files.
1996-02-03 00:43:50 +00:00
dcd66e9f4d
Clone these, and fix many bugs.
1996-02-02 20:08:17 +00:00
9db20bf150
Don't define _KERNEL here.
1996-02-02 19:42:08 +00:00
9d9a70a5a2
Fix #includes.
1996-02-02 18:05:36 +00:00
5336dade8e
Force the talley counters to be read when we get the interrupt. GCC was
...
nicely optimizing the reads out for us. Kudos for this one go to
Steven R. Weiss <srw@hvcn.org>.
1996-02-02 15:30:56 +00:00
cec913603e
Don't special-case conf.c.
1996-02-02 13:38:05 +00:00
fc9d84fb46
assym.s -> assym.h
...
(Some ports did this already.)
1996-02-02 02:34:09 +00:00
88e512b693
LOCORE -> _LOCORE
1996-02-01 22:28:24 +00:00
af9bcab2ce
Clean up and comment a bit.
1996-02-01 03:40:26 +00:00
cde62d494a
Fix for delay(usec) for small usec. From Scott Reynolds <scottr@edsi.org>.
1996-01-29 04:10:00 +00:00
229c36d3dd
Patch a few of the holes in the machine-dependent part of this driver.
...
Sync the m.i. part with the Atari.
1996-01-24 06:02:06 +00:00
1fd44da3df
Change an &= to an & -- the former stopped working for some reason
...
that I need to delve into when I have time.
1996-01-24 05:52:58 +00:00
af016e6224
Updates from Kelly Campbell <camk@ksu.ksu.edu> for some ROM addresses.
1996-01-15 12:29:48 +00:00
57219ebad3
Remove vnode_if.[ch] during a "make clean", per PR#536 from
...
Dan Carosone <danielce@ee.mu.oz.au>.
1996-01-14 21:06:47 +00:00
0d6552d914
Fix typo in last change.
1996-01-13 14:03:38 +00:00
46c929801f
Move splimp to 2 and spltty to 1.
1996-01-13 01:41:05 +00:00
2a61903be4
Patch to at least recognise FOCUS EtherLAN. From Erik Bertelson
...
<erik@sockdev.uni-c.dk>
1996-01-12 04:52:58 +00:00
46a202fc6a
Fixes from PR #1931 w/ minor mod in vm_machdep.c
1996-01-12 04:16:25 +00:00
39f642161a
Keep two states for pdma debugging. Turn debugging back on. Sigh.
1996-01-11 15:25:53 +00:00
631612b677
Move splzs to spl4 from splhigh. Really same difference...
1996-01-11 15:23:01 +00:00
2a9c1229ec
Add some more first guesses at some machines.
1996-01-09 15:26:53 +00:00
1b99515858
Add #defines for some more machines.
1996-01-09 15:26:02 +00:00
5b39541e48
New generic disk framework. Highlights:
...
- New metrics handling. Metrics are now kept in the new
`struct disk'. Busy time is now stored as a timeval, and
transfer count in bytes.
- Storage for disklabels is now dynamically allocated, so that
the size of the disk structure is not machine-dependent.
- Several new functions for attaching and detaching disks, and
handling metrics calculation.
Old-style instrumentation is still supported in drivers that did it before.
However, old-style instrumentation is being deprecated, and will go away
once the userland utilities are updated for the new framework.
For usage and architectural details, see the forthcoming disk(9) manual
page.
1996-01-07 22:01:38 +00:00
f5269d0ff6
Fix from Paul Goyette for off-by-one error.
1996-01-06 15:56:12 +00:00
682c4ec08f
Bring in a few changes from Atari port.
...
Add support from Paul Goyette for keeping more than just the last 2
states when debugging.
1996-01-06 05:18:06 +00:00
2fce159ff8
Changed name of sigaltstack's ss_base field to ss_sp to match XPG4.2 and
...
traditional usage.
1996-01-04 22:21:33 +00:00
3da4b2a160
The IST_* and IPL_* constants are not bus-specific; don't treat them as such.
...
Change splimp -> splnet in Ethernet, ARCnet, and FDDI drivers.
1995-12-24 02:29:35 +00:00
ce000f04ef
Remove deprecated cpu_setstack().
1995-12-21 05:01:32 +00:00
0a1c6c4827
The IIci also needs an sccClkConst of 115200 instead of 122400.
1995-12-18 14:38:02 +00:00
486bcce207
Remove printf() that I forgot about.
1995-12-13 14:30:29 +00:00
405ac4248f
Fix from Paul Goyette to disable linked commands on drives that
...
reject them for simple commands. Leo W. reports that this does
not work for some systems. It's better than what we have now,
though. From Paul Goyette <paul@pgoyette.bdt.com>.
1995-12-13 03:48:07 +00:00
4b2a9a582d
Update from Bill Studenmund <wrstuden@loki.stanford.edu> with some minor
...
cleanup from me. Now supports serial console.
1995-12-13 03:09:57 +00:00
37b09a913d
Double ring limits from Bill Studenmund <wrstuden@loki.stanford.edu>.
1995-12-13 03:08:12 +00:00
de6dad9228
Move bcopy/ovbcopy/memcpy into m68/m68k/copy.s, which is used by all
...
m68k ports already anyhow. No use in keeping 6 identical copies of this
function around.
1995-12-11 02:37:55 +00:00
0e0ac5ed68
cpu_fork() now returns void.
1995-12-09 04:37:23 +00:00
76b94759a1
Fix from Paul Goyette (paul@pgoyette.bdt.com) for drives that don't grok
...
linked commands.
1995-12-04 02:10:44 +00:00
99e494a984
Fix from Niklas Hallqvist / Chuck Cranor / Michael Hitch / OpenBSD to avoid
...
integer overflow in initial pmap setup. Triggerred by high values for
maxusers.
1995-12-03 13:52:50 +00:00
1b03745209
cmdlen-2 is right for the last byte of the command. Ifdef out for right now,
...
though, as some devices apparently don't support linked commands and will
reject commands that have the link bit set in them.
1995-12-01 15:14:11 +00:00
d416ec2cc9
Put the link flag in the right place.
...
Pointed out by Paul@pgoyette.bdt.com (Paul Goyette).
1995-11-30 14:25:40 +00:00
93d836857c
RAMDISK stuff.
1995-11-21 05:06:28 +00:00
447b897889
Define DST and TIMEZONE
1995-11-21 05:05:51 +00:00
e5a588356f
Small RAMDISK kernel.
1995-11-21 05:02:02 +00:00
369e3de013
Get rid of obsolete time specs.
1995-11-21 05:00:34 +00:00
f9ba6adcd7
Add rd_root.c from sun3.
1995-11-21 04:53:20 +00:00
0d91c3ff0b
Back the sccClkConst off to 115200 for several classes of machines.
1995-11-21 04:00:43 +00:00
9afe66efa5
Add rd support at the same address as the Sun3.
1995-11-21 03:39:45 +00:00
83604dcbd6
Add call to doshutdownhooks() before we attempt to reboot.
1995-11-14 04:05:49 +00:00
5b38a18f42
include files.fpe instead of just fpu_emulate.c--to get the new fpe code.
1995-11-03 04:50:21 +00:00
3074f94137
Remove ser1 from init list.
1995-11-01 04:59:31 +00:00
9a1fb2674a
Fixup error/debugging message.
1995-11-01 04:59:03 +00:00
c587e77144
Remove bogus assignment.
1995-11-01 04:58:21 +00:00
819cd49aa7
Remove -fno-builtin
1995-11-01 04:53:34 +00:00
4d13774bbc
Rearrange a bit. bpfilters -> 16 and ae0/ae1 -> ae*.
1995-11-01 04:52:46 +00:00
680ada5add
port-mac/1707: mac68k mouse drag problems with Cmd+arrow keys
...
from Ken Nakata <kenn@remus.rutgers.edu>
1995-11-01 04:40:21 +00:00
8218c4005c
Pull in all but one of Leo's changes from the atari copy.
1995-10-31 15:32:35 +00:00
47c507f8fd
SUNOS_SYS_sunos_sigreturn -> SUNOS_SYS_
...
sigreturn.
1995-10-15 03:01:57 +00:00
67e41c3280
Remove extra serial device--forgot to check this in earlier.
...
The serial device now handles both channels.
1995-10-12 17:39:45 +00:00
712a3f32c4
Nuke blkclr and use thereof.
1995-10-10 04:14:18 +00:00
2738554927
Get rid of libkern duplicates.
1995-10-10 03:49:04 +00:00
5e13eea9b1
sysarch -> sys_sysarch
1995-10-10 03:48:33 +00:00
fcb8923ffa
Remove extra reference to LIBKERN.
1995-10-10 03:47:59 +00:00
f5fae9d016
Port of Sun3/Sparc zs driver from wrstuden@loki.stanford.edu
...
(Bill Studenmund). Should be massaged into machine independence
for 1.2.
1995-10-09 12:42:16 +00:00
685b9057c2
Pick up changes from leo's latest version.
1995-10-08 17:25:19 +00:00
245f292fed
Prefix names of system call implementation functions with `sys_'.
1995-10-07 06:25:19 +00:00
5479e941d9
Add a second ppp. It makes the kernel a whole 8 bytes larger on disk.
1995-10-04 11:05:25 +00:00
8ede165771
ae0 -> ae* and add a couple of vnd devices.
1995-10-04 03:42:18 +00:00
6e435f9152
Include ether.h to get NETHER.
1995-10-04 03:38:27 +00:00
be8ef88444
Raise number of bpfs to 12 since CAP needs a minimum of 8.
1995-10-03 20:19:01 +00:00
1ddc4223b1
Add offset to mac68k_vidlog as suggested by chas@ohm.nrl.navy.mil.
1995-10-02 09:41:06 +00:00
633e32000c
Wrap call to arpintr() in NETHER to avoid unresolved external if no ether
...
devices are present. Suggested by Paul Goyette (paul@pgoyette.bdt.com ).
1995-10-02 09:38:38 +00:00
d510375b06
Change to allow nack_message() to take an argument and send
...
MSG_REJECT_MESSAGE instead of MSG_ABORT when we get an extended message.
This allows a DEC drive to work when it attempts to negotiate synch.
transfers on us.
1995-10-02 09:03:53 +00:00
0066d1a66f
Finally get this right... Final fix from Paul Goyette paul@pgoyette.bdt.com
1995-10-01 05:10:20 +00:00
9de2a25e73
Surround Debugger(); with #if DDB. Different fix than encl. for PR#1553.
1995-10-01 02:29:32 +00:00
c1138ce68a
Yet another error in the (next-to) last changes.
1995-09-30 21:34:54 +00:00
890baf19ea
Fix stupid error in one of my last changes here.
1995-09-30 19:42:34 +00:00
d73008fe8b
Always announce it when loading miniroot.
1995-09-28 04:17:24 +00:00
b1d771eeb5
Simplify nubus interrupt routines a bit.
1995-09-28 04:11:18 +00:00
a9f0a2f9c4
Fix PR 1514 from Walter Ruetten.
1995-09-28 03:15:54 +00:00
5a0bebbc54
Patch from Theo to finish clearing 040 kernel page tables.
1995-09-27 04:16:54 +00:00
232169396a
Bullet-proof a little.
...
Make some more pdma code conditional on USE_PDMA.
Handle transfers of size > MIN_PHYS.
1995-09-27 03:38:57 +00:00
4d52f57876
Add Technology Works ethernet card. From
...
Kazunari Nakamura <kazu@nkk.co.jp>.
1995-09-24 14:13:56 +00:00
e23598f24f
Much improved pdma transfers.
...
Still not nearly as fast as FWB's drivers under the MacOS.
Uses the "blind" transfer method instead of polled pdma.
1995-09-23 01:11:42 +00:00
01be7f2b8c
Need sys/mount.h for fhandle_t.
1995-09-21 11:27:43 +00:00
4a9cf8407c
Fix a warning.
1995-09-21 11:13:27 +00:00
fbd9919364
Fix warning and use __P for prototypes.
1995-09-21 03:36:25 +00:00
b895726b5c
MACCCLASSIC is Color classic. And it's more like an LC than hopeless.
1995-09-21 01:56:31 +00:00
de36f970fb
Fix a few oversights. From Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>
1995-09-20 13:03:21 +00:00
c9dfdd20b6
Compile the kernel with -Werror and -fno-builtin.
1995-09-19 23:48:41 +00:00
7d7396c414
Make system calls conform to a standard prototype and bring those
...
prototypes into scope.
1995-09-19 22:53:47 +00:00
516ddf511f
Wrap only the message in ifdef DIAGNOSTIC.
1995-09-19 03:18:15 +00:00
909842fb1f
Correct jClkNoMem address for C650 from
...
nick@csua.berkeley.edu via Walter Ruetten.
1995-09-18 13:55:09 +00:00
e8dbcda856
Do not define MIN_PHYS here--it is m.d..
1995-09-18 13:52:43 +00:00
cb5010a4fe
Fix a spelling slight. Grab the faulting address if nofault in bus error.
1995-09-18 13:51:25 +00:00
927d165081
Optimize the via interrupt processing routines a tad. From
...
chas@ohm.nrl.navy.mil (Charles J. Williams).
1995-09-18 03:15:43 +00:00
cb4eb50b28
Change HwCfgFlags4 to something a bit more mnemonic.
1995-09-17 21:28:33 +00:00
1c8c505974
Fixes from Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>
...
to avoid panic()s when we read the PRAM values while ROM
vectors are missing.
1995-09-17 18:51:40 +00:00
b528dcf5c2
Fix from Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>
...
to prevent his last changes from causing a panic if some
values are not filled in in the ROM vector table.
1995-09-17 18:50:17 +00:00
c4250f7102
Add rom vector for LCIII from Peter Kohler (kohler@ife.ee.ethz.ch)
...
via Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>.
1995-09-17 05:22:57 +00:00
a106882a85
Only use PIO instead of PDMA if DRIVER_NOINT.
1995-09-16 18:22:33 +00:00
ccaff4431c
Simplify doboot().
1995-09-16 15:35:05 +00:00
ea4e385abd
Map in the VIA space for the bloody Mac II ROMs that directly reference
...
a hardware address. Also map in the ROM space before we call doboot().
1995-09-16 15:33:54 +00:00
6ed4261a1b
Fix segment table reference bug (from Michael Hitch).
1995-09-16 15:09:28 +00:00
a8b0260a05
Sync. with atari ncr5380.c -- mainly whitespace changes.
1995-09-16 15:06:55 +00:00
214a1bac9f
Fixes from walter@ghpc8.ihf.rwth-aachen.de (Walter Ruetten)
...
to use ROM routines to read and write PRAM times, etc..
1995-09-16 12:35:53 +00:00
bee931c117
Set timezone to 0. The booter's GMT bias should be used, instead.
1995-09-16 12:33:06 +00:00
2e06f3f2bb
More changes from walter@ghpc8.ihf.rwth-aachen.de (Walter Ruetten)
...
for correct handling of timezones and PRAM <-> system time conversion.
1995-09-16 12:31:13 +00:00
4dc81200f5
Rename scsi_main_irq() to pdma_ready().
...
Missed a few ATNs in last patch. (pointed out by Leo).
Raise timeout from 100 to 1000. From Leo.
1995-09-16 11:45:18 +00:00
048e948791
As Leo pointed out, my last change was not safe. This one should be.
...
I added two new bitfields to ncr_softc. They flag which devices have
been selected, and which ones have failed to go to message out when
selected with ATN. If a target fails to go to message out the first
time it is selected, it goes into the latter bitfield. If it fails
thereafter, we treat it as we did before.
1995-09-15 01:52:18 +00:00
briggs