c866abcfc9
Restore umass_fixup_sony so that Sony cameras work once again.
2002-11-05 12:06:58 +00:00
f1db6afa29
Add udsbr(4) with radio(4) attachment to standard configs
2002-11-05 08:31:43 +00:00
f9c2080322
merge pmap.c for all 4k-page motorola-MMU (or compatible) m68k platforms.
2002-11-05 07:41:17 +00:00
f437cb0639
s/anyways/anyway/
2002-11-05 07:34:31 +00:00
e0f2bd703f
Only skip the copy if we are already relocated; always clear
...
the BSS.
2002-11-05 06:16:21 +00:00
80369ce3c8
Set the entry point to 0 for the ELF case, too.
2002-11-05 06:10:35 +00:00
314b43faa0
For ELF, set d->loadaddr to 0, as we do for a.out.
...
On both my 4000/60 and SIMH, a boot program NOT loaded at 0 consistently
is loaded +0x5200 too high in memory, which which causes a fatal trap back
into the console even before the self-relocating code can run. "wHATEver."
2002-11-05 06:08:29 +00:00
3f75e3780c
check that a disklabel is valid before trying to extract partition
...
information from it when checking for apple ufs filesystems
2002-11-05 05:18:50 +00:00
1a49eb0ca9
Make sure to fill in the load address in the dest. MOP header.
2002-11-05 05:06:05 +00:00
ac17ec7137
Show the load address in hex.
2002-11-05 04:54:26 +00:00
230caefde1
- Remove the last __P.
...
- Don't put space between function name and () op.
2002-11-05 04:49:05 +00:00
97a835073c
Add the radio(4) driver to NetBSD/alpha
2002-11-05 04:45:09 +00:00
caee39d926
Add required IPSEC #include files that prevented this from compiling.
2002-11-05 02:07:25 +00:00
6709c26d9f
In the function usage(),
...
- The -n and -t option was missing in sample command line.
- Indent the description of -r option correctly.
- Use `basename $0` instead of $0.
2002-11-05 01:53:58 +00:00
80f8dbe30a
Add a new VM map, lkm_map, which machine-dependent code can provide
...
in the event that it needs to use a special VM range (x86_64 falls
into this category). We fall back onto kernel_map if machine-dependent
code doesn't create a special map.
2002-11-05 01:24:35 +00:00
6596b29802
t4 -> ta0
2002-11-05 00:05:15 +00:00
3d73192560
struct kevent's udata is actually intptr_t
2002-11-04 22:14:46 +00:00
511dcb963a
PR/18929: Kimmo Suominen: rpc.rusersd ignores utmpx
2002-11-04 22:03:38 +00:00
0bc2a57e26
Use named indices for RA, SR, MULLO, MULHI, and EPC in the
...
trapframe.
2002-11-04 20:02:09 +00:00
0a3ddcba15
Catch up with jdolecek again and remove ./usr/include/powerpc/macho_machdep.h.
2002-11-04 19:58:36 +00:00
fab408c3af
Use named indices for trapframe slots, and use the TA0-TA3 names
...
where appropriate.
2002-11-04 19:51:05 +00:00
9e19c6e872
Add ./usr/include/powerpc/macho_machdep.h
2002-11-04 19:49:00 +00:00
c8fbf16072
Define named constants for the trapframe register idices (they
...
are different from the normal register numbers). Use these names
in genassym.cf. (Wow, how ever did that test kernel boot before...)
2002-11-04 19:40:04 +00:00
00f370741b
we don't own Jason, even if we'd like to
...
(fix typo in comment, in case you're wondering ;)
2002-11-04 19:17:33 +00:00
ad825a97f1
t4-t7 -> ta0-ta3
2002-11-04 18:54:13 +00:00
1d0b5f8106
A few more t4-t7 -> ta0-ta3 that I missed before.
2002-11-04 18:45:55 +00:00
731fe805a1
t4-t7 -> ta0-ta3
2002-11-04 18:41:37 +00:00
32d1740afc
Add FRAME_[TA0-TA3] and TF_REG_[TA0-TA3]. Change TF_REG_* to use
...
defined constants for register indices, rather than hard-coded numbers.
2002-11-04 18:41:03 +00:00
426a477b06
Be more verbose about the second DAC support.
...
requested by the wiz
2002-11-04 17:07:44 +00:00
29d58d0333
s/sqiud/squid/ in comment, reported by skrueger at europe com.
2002-11-04 16:59:37 +00:00
486e308c1a
note eap(4) change
2002-11-04 16:38:51 +00:00
22d0e4bb85
auvia_set_params:
...
For a fixed-rate codec, when AUMODE_RECORD and AUDIO_ENCODING_MULAW or
AUDIO_ENCODING_ALAW, use AUDIO_ENCODING_SLINEAR_LE/16bit for native encoding
instead of AUDIO_ENCODING_ULINEAR/8bit because aurateconv does not support
sampling rate conversion for 8 bit PCM.
This change fixes PR kern/18834.
2002-11-04 16:38:49 +00:00
acfba287f0
reflect second DAC support
2002-11-04 16:37:04 +00:00
d6b170e2de
add support for the second DAC found on the chip. to attach the second
...
audio device, define EAP_USE_BOTH_DACS
2002-11-04 16:34:25 +00:00
2ba45545df
back previous off; don't install macho_machdep.h
2002-11-04 15:27:15 +00:00
8eadd119b9
Add power-management register definitions.
2002-11-04 14:56:10 +00:00
98219f2782
regen (typo fix from PR 18921)
2002-11-04 12:36:25 +00:00
ec50e0a966
Fix typo reported by Nicolas Joly in PR 18921.
2002-11-04 12:35:27 +00:00
c7cd1b33d0
fix PR#18909, but not quite exactly the same as the patch provided. also,
...
check if the filesize causes a size_t overflow and if so, use the fallback
read/write loop method.
2002-11-04 12:04:23 +00:00
ba91c01b07
Fix asm usage. "tf" is an output operand, not an input.
2002-11-04 08:12:30 +00:00
0c51bd608e
Missing '.'
2002-11-04 08:05:52 +00:00
94b2e6e61d
Dump DDB_* and SYMTAB_SPACE options to opt_ddbparam.h rather than opt_ddb.h.
...
These options are used in limited files but #include "opt_ddb.h" are
everywhere, and changing them caused almost full recompilation.
2002-11-04 06:24:38 +00:00
af5c630516
cpu_dump() has to return something if it bails early; make it so.
2002-11-04 05:41:29 +00:00
65fdfe7d64
Add TA0-TA3 register indices.
2002-11-04 04:24:48 +00:00
abaff8e1c6
t4-t7 -> ta0-ta3
2002-11-04 04:06:51 +00:00
3e54f426e0
Rearrange mips_pagecopy() and mips_pagezero() for N32/LP64.
...
XXX Does not yet use the correct reg names for new-ABI.
2002-11-04 04:04:32 +00:00
5cad86b3ea
repair backwards compatibility with netbsd 1.6 - if we are not given the
...
wanted sizeof(struct disk_sysctl), use the old size. for non-COMPAT_16,
however, we return EINVAL so that all future programs are forced into
passing the wanted size. 1.6 iostat(8) works with -current kernel again.
as seen on tech-kern.
2002-11-04 03:50:07 +00:00
1bf923d5f3
Add N32 register vars.
2002-11-04 03:46:18 +00:00
aa2b9a65fc
Add SGI-compatible ta0-ta3 register names. These allow one to write
...
asm code which can be built easily in old-ABI and new-ABI environemnts.
In old-ABI, they map to t4-t7, and in new-ABI, they map to a4-a7. This
means that t0-t3,ta0-ta3,t8,t9 are available in both ABIs.
Because ta0-ta3 overlap with arg regs (albeit arg slots which are usually
unused), they should be used only if t0-t3,t8,t9 isn't enough.
2002-11-04 03:38:32 +00:00
bae541911c
Add N32/N64 reg names.
2002-11-04 03:30:32 +00:00
cjs