Commit Graph

33 Commits

Author SHA1 Message Date
mycroft 6ada3afd8b Reject variant numbers which are too large (so that a new version of isapnpdevs
with an old driver will not lose mysteriously).
1999-03-22 10:00:09 +00:00
mycroft 2cccf3bd4a Update callers of isapnp_devmatch(). 1999-03-22 09:44:12 +00:00
mycroft 878708a06b Adjust for MPU attachment change. 1999-03-22 07:41:36 +00:00
mycroft 4822d3d0b0 Move IRQ setup into frontend. Need to move DRQ handling as well. 1999-02-19 16:10:44 +00:00
augustss cd09067eb4 * Redo the way the way the MIDI driver attaches to audio devices.
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
  The opl driver is not finished yet; it sounds pretty awful.

For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
1998-08-17 21:16:09 +00:00
augustss 48bae9ee88 Add MIDI support. The MIDI devices can be accessed as ``raw'' through
the /dev/rmidiN devices, or with a sequencer interface via /dev/music.
So far the only supported MIDI device is the MPU401 port on SoundBlaster
(and only on SB on isapnp, since we do not have locators with multiple
values yet).
1998-08-07 00:00:55 +00:00
christos bdb2269a46 Create a master list of pnp logical and compatibility device codes instead
of hard-coding it into each driver and use a centralized probe function.
1998-07-23 19:30:44 +00:00
thorpej d2e377891d Get the interrupt share type from the PnP info. 1998-06-29 22:42:32 +00:00
thorpej 5bc2217a49 Nuke __BROKEN_INDIRECT_CONFIG. 1998-06-09 07:24:55 +00:00
thorpej 129eab3152 Adjust for the changes to the ISA DMA API. 1998-06-09 00:05:19 +00:00
augustss 74545baf39 Add a Yamaha OPL3-SA3 driver and clean up all AD1848 drivers.
Submitted by Constantine Sapuntzakis <csapuntz@reeducation-labor.lcs.mit.edu>
and originally written for OpenBSD.
1998-05-20 16:19:41 +00:00
thorpej ddf189f7da Remove the stuff that was apparently not intended for commit in the
previous change.
1998-04-13 22:18:03 +00:00
augustss 993dcaa947 Add another device, YMH0021. From nathanw@MIT.EDU, PR #5289. 1998-04-13 13:19:40 +00:00
enami 9db8348725 Cosmetic change; use tab of width 8. 1998-02-22 05:14:34 +00:00
bouyer 605c219597 Add ID for the Vibra16X PnP board (aka CT4170). 1998-01-30 11:42:51 +00:00
thorpej 985f99fe00 Don't initialize softc's space tags/handles until isapnp_config() has
been called.  Pointed out by Lennart Augustsson.
1997-12-17 01:31:59 +00:00
drochner 8e7686a76b make it compile without "__BROKEN_INDIRECT_CONFIG" 1997-11-30 15:13:30 +00:00
augustss e86b728748 Remove broken PnP id again. 1997-11-20 08:53:39 +00:00
augustss f1a39fe2df Recognize another card and handle the case when both drqs are the same. 1997-11-18 19:24:46 +00:00
augustss ba76377205 Make an XXX note about the broken ALS id. 1997-11-18 19:17:21 +00:00
augustss fe3e796d68 Dropped an else in last commit. 1997-11-18 11:34:50 +00:00
augustss c622832eb0 Add another card and take care of swapped drqs. 1997-11-18 11:27:04 +00:00
augustss edf79539db Add another SB AWE64 Value. 1997-10-15 05:13:31 +00:00
augustss 7bc1f9d060 Recognize SB AWE64 Gold. 1997-09-13 13:37:28 +00:00
mikel 7826bcb58c add support for generic SBs by matching compatIDs 1997-08-03 08:31:00 +00:00
mikel 379f3b1c05 add device ID for SB AWE64 Value; from William Coldwell in PR kern/3716.
also add comments for some device IDs describing what they match.
1997-06-18 07:19:08 +00:00
thorpej 11e78a6b0d Pull thorpej-bus-dma branch into mainline. 1997-06-06 23:43:45 +00:00
mikel 27d98ef0db add support for AD181[56] SBPro emulation 1997-04-10 06:33:16 +00:00
christos 93b36b663d PR/3388 from Tatoku Ogaito: Add product id for another soundblaster PnP card. 1997-03-25 15:16:49 +00:00
mycroft 9bc57d2244 Add PnP ID for SB AWE32. 1997-03-21 00:49:38 +00:00
mycroft 95abb133dc Add 16-bit DRQ support on PnP, and enable 16-bit output. 1997-03-20 11:03:10 +00:00
christos 9733b260cd Add a match for the ESS1868; from herb... 1997-03-13 01:45:11 +00:00
christos cf455412fc Plug and Play support. 1997-01-16 22:00:57 +00:00