jdolecek
63958eee01
One item off TODO list - we check for MCA bus presence via bios call
2001-05-02 13:20:31 +00:00
fvdl
9554615dfb
Set NMBCLUSTERS to the old value of 256 here, as the new default
...
will only be a waste of space for this configuration.
2001-04-29 12:48:12 +00:00
fvdl
70316ad6e1
Remove COMPAT_14.
2001-04-29 00:34:11 +00:00
jdolecek
3367b801f2
Add driver for SKNET Personal and MC+ - AMD Lance 7990 based ethernet cards.
...
Both models tested and seem to be quite stable and fast.
Thanks to:
- Hans Hubner <hans@Huebner.org> for giving me the cards for testing
- Georg Klug of Syskonnect, who provided me with hw docs for these cards,
very promptly and willingly - I wish all vendors would be like this
- Alfred Arnold, Linux SKNET driver author, for giving me valuable Syskonnect
contact :)
2001-04-27 18:03:40 +00:00
jdolecek
e99b513ca1
fix typo
2001-04-23 05:45:43 +00:00
soren
a671e50d00
Put tr(4) in network section.
2001-04-22 19:53:25 +00:00
jdolecek
24568e5a13
Since IBM PS/2 support is becoming quite stable, remove the lenghty
...
disclaimer on top and leave only necessary fragments.
edc(4) seems to be quite stable, remove the EXPERIMENTAL note
2001-04-22 19:15:05 +00:00
jdolecek
0800e2ed46
add major { ed = 20 }
2001-04-22 18:39:49 +00:00
fvdl
4c41d3275c
s/cheap/expensive/ for DIAGNOSTIC
2001-04-21 21:10:41 +00:00
fvdl
41a3ee5d58
Note that the (already commented out) DIAGNOSTIC option is expensive.
2001-04-21 21:03:46 +00:00
fvdl
2654febb55
Remove DIAGNOSTIC and mark it as expensive.
2001-04-21 21:02:03 +00:00
fvdl
a1b8e618af
Doh. Put the option *after* the include of plain GENERIC.
2001-04-21 20:58:13 +00:00
fvdl
781af989f9
Move the DIAGNOSTIC option to a seperate config file, it's too expensive
...
to be in GENERIC (which should be a kernel ready for production use).
2001-04-21 20:49:14 +00:00
jdolecek
a98cbd0740
Add MCA ne(4) attachment for Novell NE/2 Ethernet adapter and clones.
...
Tested with NE/2 card provided to me by Hans Hubner <hans@Huebner.ORG>.
The Compex and Arco cards were not tested. According to Linux ne2 driver,
they should work same way as NE/2.
2001-04-20 07:37:42 +00:00
uch
9b730bc368
patch PR port-i386/11114 by MINOURA Makoto.
2001-04-19 17:32:40 +00:00
jdolecek
dbf91c827d
Use "edc" instead of "dasd". As pointed out by Soren, dasd doesn't
...
mean anything special in IBM-talk. And edc better matches prior art, too.
2001-04-19 17:17:28 +00:00
jdolecek
0915128873
add stuff for ESDI disks, marked as EXPERIMENTAL
2001-04-19 07:37:10 +00:00
thorpej
8b3fc18a1f
Generic soft interrupt implementation for NetBSD/i386. This could
...
probably be tuned somewhat, but this is a stop-gap measure to hold
us until Bill Sommerfeld's new interrupt code comes in from the
MP branch.
2001-04-14 06:49:30 +00:00
jdolecek
e482ee9d62
add rnd (for ssh/sshd) and couple comments
2001-04-06 06:44:08 +00:00
jdolecek
803c0c7eda
Add driver for AT1720 MCA cards. This uses generic MB86960 support code,
...
and shares some bits with ISA AT1700 driver. Gee, this one was really
easy :)
This card turned out to be quite good performer - I get about 360KB/s
on 386DX PS/2 machine, which is best of all supported cards so far.
2001-03-31 00:43:04 +00:00
minoura
a9a5dcd043
Add yds at pci and children.
...
Alpha and i386 are the only tested ports.
2001-03-30 14:47:48 +00:00
ichiro
a8c0b619da
support umct USB-serial device
2001-03-28 18:45:07 +00:00
jdolecek
b53fce84d3
Add an autoconfig node for PCI-MCA bridges. Configures MCA bridges
...
via callback. This beast is very rare, present only on some IBM PCs.
Code was copied off pceb.
2001-03-25 09:54:10 +00:00
jdolecek
75b7bea508
Add MCA we(4) attachment for WD80x3 cards and clones. Tested with
...
WD8003W/A, card provided by David Brownlee (thanks!). The SMC Elite stuff not
tested since I don't have any; hopefully it's correct, should match
information in ADF files.
The MCA-specific init quirk taken from Linux smc-mca.c driver.
I don't quite grok why it works, but it does *cross fingers*.
The WD8003W/A seems to be quite a good choice. I get like 340KB/s on my
machine, where 3c523 does only like 310KB/s. The numbers would be probably
even better with faster CPU than 386DX :)
2001-03-23 19:25:35 +00:00
jdolecek
031c6d8c24
Add MCA ep(4) attachment, for 3Com 3c529-type cards. Tested with 3c529-TP,
...
provided to me by David Brownlee (thanks!).
Performance of this card is quite poor on my PS/2 with 386DX, like 100KB/s
at best, but as low as 5KB/s when transferring bigger files due to
packet overruns. It would be good to revisit this later, probably by
teaching the ic code to use RX Early.
2001-03-22 16:54:45 +00:00
lukem
7fec679447
sync to GENERIC 1.400
2001-03-20 05:49:32 +00:00
jdolecek
1360c6c34c
add com at mca, bpfilter
...
add comment for elmc, describing what it is for
2001-03-19 22:08:17 +00:00
itojun
846f79ea76
LAMB uses nonstandard timer frequency. set TIMER_FREQ to appropriate
...
value (otherwise severe clock delay will result).
http://www.wildlab.com/bbs/logview.cgi?pg=9&no=521
2001-03-18 15:24:14 +00:00
jdolecek
3261555469
bump maxusers to 8
2001-03-17 09:55:32 +00:00
jdolecek
f3d3e9a30e
add elmc(4)
...
convert from memory disk to diskless-type config
2001-03-17 09:53:54 +00:00
fvdl
e55dd7530b
Use assembly version of in4_cksum (which is a piece of code that
...
does some of the extra work and then jumps into in_cksum).
2001-03-06 14:55:13 +00:00
itojun
fb90007fcb
sync with GENERIC 1.400
2001-03-04 07:34:20 +00:00
lukem
acec2828d9
whitespace police
2001-02-24 01:34:28 +00:00
chs
2ff77ab154
fix REALBASEMEM/REALEXTMEM and defopt them while we're at it. from jason.
2001-02-11 19:03:47 +00:00
mycroft
d3f45f8053
Update to the current state of the world.
2001-02-11 10:40:51 +00:00
mycroft
c36eeffed0
Make this a little more realistic.
2001-02-09 19:12:08 +00:00
perry
65e351a124
keep joystick lines together
2001-02-04 17:36:03 +00:00
ad
8d75ab98d3
Add a driver for the Mylex DAC960 family (including DEC SWXCR).
2001-02-04 17:05:11 +00:00
fvdl
fbd66cd154
Add COMPAT_15
2001-02-02 10:53:48 +00:00
tshiozak
d3545308ee
add umidi.
2001-01-30 23:32:34 +00:00
nathanw
88fbd1edd4
Add joy at pnpbios.
2001-01-28 00:50:23 +00:00
jmc
5fe51991eb
Enable MFS. This will allow /dev to be built on mfs.
2001-01-24 18:08:26 +00:00
augustss
5704d1e2b8
Uncomment the uftdi driver.
2001-01-23 01:44:38 +00:00
ichiro
5760a7d243
add I/O DATA USB-RSAQ2 serial adapter
...
uplcom* at uhub? port ?
ucom* at uplcom? portno ?
2001-01-23 01:27:23 +00:00
augustss
62fe0f7f69
Add clct(4) driver.
2001-01-22 01:39:05 +00:00
lukem
81685caeed
a few things depend upon assym.h, so add appropriate dependencies.
2001-01-20 07:18:06 +00:00
thorpej
36607aea63
In the ELF case, use the kern.ldscript unless overridden by the kernel
...
config file.
2001-01-20 01:05:53 +00:00
thorpej
6970f51de0
Add a linker script for the kernel, which places _etext after
...
all of the read-only data. Move _etext after all the read-only
data in the LARGEPAGES script, as well.
This will cause const data to actually be const on i386 kernels now
(it was, by sheer luck, on LARGEPAGES kernels simply because of the
section rounding that the LARGEPAGES script performed).
2001-01-20 01:05:23 +00:00
fvdl
f41a35188a
Actually, specify the number pf ptys explicitly anyway, omitting
...
the number and thus having the default value was probably a mistake
(16 would be too few).
2001-01-19 14:44:11 +00:00
fvdl
01c07896a6
Update for reality (same as in use on the actual machine, except that
...
-current doesn't require the number of ptys to be specified).
2001-01-19 14:29:20 +00:00