011f2bda08
defopt NS, NSIP.
1998-07-05 06:49:00 +00:00
3751946b97
defopt INET, NETATALK.
1998-07-05 00:51:04 +00:00
466e784ee1
defopt DDB.
1998-07-04 22:18:13 +00:00
53559837db
<dev/sun/disklabel.h> not <dev/sun/sun_disklabel.h>
1998-06-30 04:35:37 +00:00
665cf08eec
Changed to include sun_disklabel.h from its new location in dev/sun.
1998-06-24 21:36:05 +00:00
6e85156429
Simplify ifdefs in cg4b_ldcmap()
1998-06-09 16:10:25 +00:00
3634eb6176
Make this work on the 3/80, which has the Brooktree DAC
...
wired high-byte-only like the sparc. (yuck!)
1998-06-09 14:38:59 +00:00
ba4cb4e29d
Kill the printf: enabling zs interrupts
1998-06-08 20:34:43 +00:00
24903a0744
Deal with missing P4 register on old Sun3/60 machines.
1998-03-21 21:38:24 +00:00
d342d51752
Fix comments
1998-03-08 18:56:08 +00:00
4242e2ab10
No need for default base addresses here anymore.
1998-03-08 18:54:23 +00:00
5242b3b02a
Need to use an offset to map the colormap H/W now that the
...
config address is that of the P4 register. Oops.
1998-03-08 18:53:17 +00:00
23b16936e8
Fix build with NFB=0
1998-02-26 16:01:18 +00:00
22c20779d0
Rewrite the match/attch routines to use the P4 register
...
(when it exists). Also get the size right; other fixes.
1998-02-08 05:22:08 +00:00
0378cb2ff6
Define the CG4B_OFF_* values to be relative to the location of
...
the P4 register so the probe routine finds the P4 at off=0.
1998-02-08 05:20:08 +00:00
99fd045ec0
Add fb_eeprom_setsize() for setting the FB size based on the EEPROM
...
value (to be used only if unit=0). Add P4 helper functions:
fb_pfour_id, fb_pfour_setsize, fb_pfour_{get,set}_video
1998-02-08 05:15:35 +00:00
ab8340e9da
cosmetic
1998-02-08 05:13:17 +00:00
eff2e270bd
Merge arch/sun3x into arch/sun3
1998-02-05 04:56:24 +00:00
faf4390c38
Save the "bustype" from our attach args in the controller "softc"
...
and use that instead of hard-coding BUS_VME32 everywhere.
(The Sun3X needs a more specific bustype value.)
1998-01-26 21:03:43 +00:00
3ba1e07ef5
Simplify the colormap and blanking stuff a little.
1998-01-26 20:53:17 +00:00
119b962a9d
Add: extern struct cfdriver cgtwo_cd;
1998-01-23 00:01:28 +00:00
ccf791aa2e
Add: extern struct cfdriver fdc_cd;
1998-01-22 21:26:25 +00:00
2565ff444a
Update for config changes.
1998-01-12 20:35:04 +00:00
1adb4489a6
Update for changes to config.
1998-01-12 20:23:38 +00:00
015e898c02
RCSID Police.
1998-01-05 07:02:46 +00:00
e0170ea83c
Remove local definition of DEBUG (left there by accident).
1997-12-09 22:29:01 +00:00
1e1b53cba9
The ie_reset function needs to turn off loopback mode.
...
(Remember the TDR complaint: short X clocks away?
that was because the chip was in looback mode! 8)
1997-12-09 22:25:42 +00:00
2e40be26b8
The ie_reset function needs to turn off loopback mode.
...
(Remember the TDR complaint: short X clocks away?
that was because the chip was in looback mode! 8)
1997-12-08 21:49:50 +00:00
ec9abe23be
Several fixes. This version actually works!
1997-12-08 19:22:52 +00:00
1a340a5921
Fix missing newline in attach
1997-12-08 19:19:25 +00:00
c497f2ca2b
Define the interrupt vector registers as 16-bit fields as
...
shown in the documentation. (Thanks to Michael Thompson)
1997-12-08 19:17:12 +00:00
7c95ede823
Kill some noise from -DDEBUG
1997-12-02 19:48:45 +00:00
5eda2e37e8
Oops...(pasto)
1997-11-08 05:42:07 +00:00
924c57cce0
Disable DMA and interrupts for now (via se_options).
1997-11-07 22:11:19 +00:00
7a33a8aaef
Silence collisions
1997-11-05 00:02:51 +00:00
ec5fd4954e
Set rr0_dcd.
...
Don't set DCD_IE and CTS_IE here; let the MI code do it.
Handle MDMBUF.
1997-11-02 08:05:06 +00:00
38d61d7805
Left DEBUG there by accident. Remove it
1997-10-28 21:12:58 +00:00
923a3fcbff
Quiet down those "interrupt stuck?" messages.
1997-10-28 21:10:07 +00:00
5770fa53f1
I had the memory map wrong for the SCSI/Ethernet board.
...
Fixes from Michael Thompson.
1997-10-25 18:20:09 +00:00
1182affa8f
I had the memory map wrong for the SCSI/Ethernet board.
...
Fixes from Michael Thompson.
1997-10-25 18:04:20 +00:00
2476c3a858
Fix a warning
1997-10-21 22:14:08 +00:00
f246430dba
Nuke same-unit hack in match.
1997-10-17 21:49:07 +00:00
1ea958fad8
Move initialization code from xxattach to xx_init and call that
...
from both xxattach and xxopen instead of calling xxattach from
xxopen with faked up autoconfig args. Fix warnings.
1997-10-17 03:47:52 +00:00
f14029fcd6
Clean up the match function.
1997-10-17 03:44:49 +00:00
703ed32e6c
Clean up cg2match()
1997-10-17 03:43:56 +00:00
98eb63d8f8
Add support for the Sun3/E "se" (Ethernet/SCSI) board.
...
Compiles, but NOT YET TESTED.
1997-10-17 03:39:44 +00:00
81f2d0b179
Move si_reset_adapter() from si.c into the bus-specific modules.
...
Support the Sun3/470 (sun3x). Adapt to the new DVMA interface.
Set the si_xxx_options in the config file (easier for users).
1997-10-17 03:33:34 +00:00
5a1f692161
Sync. with the sun3x (mostly cosmetic changes).
1997-10-17 03:25:05 +00:00
38b2ba3e3f
typo
1997-10-07 20:05:00 +00:00
c9d8d6ae1d
Use sizeof(struct ieob) instead of a sun3-specific macro,
...
so this driver will work on the sun3x as well. (Works!)
1997-10-07 18:17:19 +00:00
b298a0b98c
fix warnings
1997-10-07 17:56:30 +00:00
076ab3f536
Tweak the console support a little (more like the sparc version).
1997-10-06 21:04:21 +00:00
210e726aba
Use vm_offset_t to represent control space addresses, because
...
they are more like physical addresses in that you can not just
dereference a pointer to access the space. (Also, if you use a
pointer type for such things, gdb will _try_ to deference it.)
1997-10-06 19:58:01 +00:00
ede5144deb
read regs in the right order
1997-10-05 21:00:12 +00:00
39bf0bf971
normalize include order
1997-10-05 20:59:02 +00:00
3b4ad2b60e
Copyright assigned to The NetBSD Foundation.
1997-10-05 18:15:51 +00:00
0ec1cda62f
Move the call to cninit() up a level (easier to find).
1997-10-04 19:46:17 +00:00
6f3bab1f59
Merge scsipi branch in the mainline. This add support for ATAPI devices
...
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
1997-08-27 11:22:52 +00:00
7a06252f07
%x -> 0x%x, fixes for PR#3757
1997-07-29 06:43:51 +00:00
9388f271a9
use locator defines in "locators.h" to index cf_loc[]
1997-07-17 02:12:50 +00:00
63c23f2337
Add reference to DMA selection variable used in dev/ic/ncr53c9x.c and sample
...
code to enable it. Currently commented out.
1997-06-27 02:07:32 +00:00
335b7a2d00
Duplicate changes recently made to the SPARC version of this file:
...
Do not print warnings if selection of a target via DMA was interrupted
by another target.
1997-06-26 02:47:09 +00:00
cf016f61f4
foosize()'s return value is in DEV_BSIZE units; adjust the size obtained
...
from the disklabel accordingly.
1997-06-24 00:56:28 +00:00
f9d3344f9c
xysize(): only call xyopen()/xyclose() if not already open, per the
...
current `openmask'.
1997-06-18 20:47:00 +00:00
4269e0eab1
xdsize(): only call xdopen()/xdclose() if not already open, per the
...
current `openmask'.
1997-06-18 20:45:03 +00:00
4502541573
When turning off the drive motor, de-select the drive so the busy light
...
extinguishes.
1997-05-30 03:23:11 +00:00
fc60f1979e
Prevent RAM disk hooks from compiling until sun3 md_root.c can support
...
ram disk images that are read in from the outside.
Sync with some old local changes.
1997-05-24 00:09:49 +00:00
589bdf49d5
si_intr: if our CSR indicates an interrupt, return 1.
1997-04-28 22:10:41 +00:00
df35245ac0
Fix a bug where OBIO locators were not presented to the children.
...
Rename obio_alloc to obio_mapin; add comments, etc. (like sun3x)
1997-04-28 22:02:43 +00:00
388bf0e0e0
Rename obio_alloc/obio_mapin and check for obio in match functions
...
for attachments that will use obio_mapin.
1997-04-28 21:59:19 +00:00
a5efc65699
Sync. up with the sun3x version.
1997-04-28 21:55:59 +00:00
479d3fa66d
No longer needs an early init call (just normal autoconfig).
1997-04-28 21:51:49 +00:00
e2ca51d2a1
Fixed OBIO locators bug, so this can do the normal thing now.
...
Also improved handling of spurious interrupts, and sync up with
the sparc version.
1997-04-25 18:55:05 +00:00
fa9f5b2448
Constants for the p4 register.
1997-04-09 04:50:43 +00:00
3c962bb544
First working version.
1997-04-09 04:49:09 +00:00
c3f299a527
Now using dev/ic/ncr53c9x.c
1997-03-20 16:01:36 +00:00
9f13c3afe5
Read the EEPROM once at attach time, then do user I/O on the copy.
...
Make /dev/eeprom support normal "read to EOF" behaviour.
Removed ee_console, ee_get_byte (dead code).
1997-03-18 23:31:59 +00:00
1d987a161b
#include <net/if_media.h>
1997-03-17 03:17:34 +00:00
07b064e02e
New ARP system, supports IPv4 over any hardware link.
...
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
1997-03-15 18:09:08 +00:00
4756c63625
Call isr_soft_request() at most once per zshard interrupt.
...
In the softintr, raise to spltty before calling tty code.
1997-03-11 21:54:35 +00:00
d0a45ab470
Use the macros sc_if, sc_addr to avoid lots of references to sc_arpcom.
1997-03-10 21:45:01 +00:00
403bdb83fa
Add xxc_print functions to pass to config_found() instead of NULL.
...
(Thanks to Chris Demetriou suggesting the improvement.)
1997-02-28 21:23:06 +00:00
1354ca2916
Get rid of some printf noise.
1997-02-28 17:17:22 +00:00
07b4e45308
Allow per-target control over disconnect/reselect.
1997-02-26 22:26:00 +00:00
ae70fb71ec
No need for dma_cd, so move it into the #if 0 section too.
1997-02-24 15:02:23 +00:00
ad9700fa62
Initial import from SPARC port.
1997-02-24 01:45:13 +00:00
7e74608bf9
Get the screen size right on the 3/260 (Fixes PR#2402)
1997-02-19 00:22:40 +00:00
443faad4e1
Reorganize/simplify the way the memory layout is done.
...
Update to the latest sys/dev/isa/if_ie.c (new ieget).
1997-02-13 20:48:36 +00:00
5997a69a3e
Tune MXFRAMES and MXFRAMES down a little.
...
Reorganize the softc for convenience in ddb.
1997-02-13 20:43:18 +00:00
6a83772a4e
Replace caddr_t with u_int in device structs.
...
Reduce MAXMCAST by a few to be safe.
1997-02-13 20:40:11 +00:00
a4b09086fe
Actually works now!
1997-02-12 01:07:56 +00:00
f55c7652b7
Export zs_get_chan_addr() for zs_kgdb.c
...
Print the "console on ..." in cninit(), and
avoid reference to kbd/kd drivers if NKBD==0
1997-02-10 23:29:52 +00:00
196f91101a
Make some more things static, and cosmetic stuff.
1997-02-10 23:26:21 +00:00
9f9e8281e0
Add zs_get_chan_addr(), zs_kgdb_init()
1997-02-10 23:24:18 +00:00
a5b114c665
Forgot to initialize cn->cn_dev, cn->cn_pri
1997-02-10 19:11:12 +00:00
d9267b93fd
Forgot to initialize cs->cs_rr0_dcd and fiends in attach.
1997-01-31 00:07:06 +00:00
46cb437677
Nuke sunmon.h, add machdep.h
1997-01-27 21:57:44 +00:00
ca8e9852d2
Use sunmon_abort() instead of mon_panic(), etc.
1997-01-27 20:50:36 +00:00
9b52402303
Use sunmon_abort() instead of mon_panic()
...
Let idprom_init() have void return.
1997-01-27 20:35:58 +00:00
f8d04bcffb
Update comment about si_obio_options
1997-01-27 19:54:06 +00:00
340699a2b1
Fix copyrights (/s/REGENTS/FOUNDATION/)
1997-01-27 19:40:46 +00:00
dff67a76a8
Map regs using sizeof(struct lereg1) instead of OBIO_AMD_ETHER_SIZE.
...
Also fix copyright (s/REGENTS/FOUNDATION/)
1997-01-27 16:57:12 +00:00
090dfd13c2
Now that interrupts are enabled AFTER autoconfiguration, put in the
...
cute little trick where the zs interrupts are enabled as soon as the
zs driver has done its attachments. That allows a console break to
enter the debugger during the rest of autoconfiguration.
1997-01-18 19:49:01 +00:00
84bd1d6f2c
Use the same names (OBIO_ZS_*) as the sun3x port...
1997-01-18 19:17:28 +00:00
8ea480525d
Use the same names (OBIO_ZS_*) as the sun3x port so we can share zs.
1997-01-18 17:19:52 +00:00
3bbf01bfb7
rename: ramdisk => md
1996-12-28 23:53:10 +00:00
3cc81b9726
Add a diagnostic to panic when obio config data has a
...
default address, which is no longer supported on obio.
1996-12-17 21:21:13 +00:00
0c5e3e4955
Make this compile with -Werror -Wall -Wstrict-prototypes
...
(finally! yea!) Also get rid of __BROKEN_INDIRECT_CONFIG
1996-12-17 21:10:35 +00:00
1169ecb0a2
Adapt to the new definition of struct zsc_softc
...
(the zsc_cs[2] members are now POINTERS!)
Also fix warnings...
1996-12-17 20:46:11 +00:00
31a2dbff56
No longer used.
1996-12-14 15:51:31 +00:00
5eaee56ccf
Increase MAXMCAST from 50 to 250 (to match dev/ic/i82586.h).
1996-12-13 19:54:08 +00:00
5736d8f544
Kill some dead code.
1996-12-13 19:50:10 +00:00
0332502588
Most files that were copyright Adam Glass and/or Gordon W. Ross
...
are now copyright The NetBSD Foundation (rights assigned).
1996-11-20 18:56:49 +00:00
576fa146ac
kill some outdated stuff
1996-11-19 20:58:32 +00:00
a0dffcafc2
Use bitmask_snprintf().
1996-11-13 07:00:30 +00:00
f9d54194d5
Allow the config line "flags" to set bits in si_options.
...
Thanks to Jason Thorpe for the fix! (PR#1929)
1996-10-30 00:31:39 +00:00
769fe0dfca
Get rid of some cruft in the match function.
1996-10-30 00:24:32 +00:00
aac9e275ac
Add a "submatch" function to the obio bus driver so the children
...
of this driver can get rid of the cruft in their match functions.
1996-10-30 00:20:01 +00:00
d6dfd783d9
Checkpoint new version of this driver with support for the "Type A"
...
variant of the CG4 (the one with the AMD colormap DACs). This has
been tested only on the "Type B" H/W at this point (Brooktree DACs).
Thanks to Ezra Story and Scott Ellis for the "Type A" support.
1996-10-29 19:54:19 +00:00
cb78378201
Fix typo (fbattach => fb_attach)
1996-10-29 19:27:37 +00:00
a087bfeb5c
backout previous kprintf change
1996-10-13 03:47:25 +00:00
19d8368f2f
printf -> kprintf, sprintf -> ksprintf
1996-10-11 00:44:42 +00:00
401d011da6
Merge netbsd-1-2 branch back into mainline.
1996-10-09 00:14:32 +00:00
b3eac79b64
tty stop functions really should return void, not int, and certainly not both.
1996-09-02 06:43:16 +00:00
71ad30d0e9
(1) set scsi_link channel to either the appropriate channel (if a
...
multi-channel driver), or to SCSI_CHANNEL_ONLY_ONE if a
single-channel driver.
(2) use scsiprint() rather than a locally-defined autoconfig print
function, and kill any locally-defined print function.
1996-08-28 18:59:15 +00:00
2a73ef60b7
change cfprint_t type definition to take a const char *, rather than
...
a char *, because that's what was really intended, and because
if the print function modifies the string, various things could become
unhappy (so the string should _not_ be modified).
1996-08-27 21:53:46 +00:00
c0bae2d189
sync with sparc version:
...
repair XDC_HWAIT macro to handle the fact that waithead is now
unsigned. should fix xdc watchdog timeouts noted in port-sparc
by nathanw@mit.edu .
1996-08-12 20:28:54 +00:00
bf7ab63c97
Move some of the DMA engine initialization from the "start" routine
...
to the "setup" routine. Doing the initialization earlier prevents
nasty race conditions where the 5380 prefetch changes the counter.
1996-06-17 23:21:29 +00:00
dc066b6a10
KGDB support
1996-06-17 15:40:36 +00:00
3274834c18
Use the PROM->input_source setting instead of EEPROM to determine
...
where the console is, because that is correct if, for example, you
boot with the diag/norm switch set for diagnostics and the EEPROM
is set for keyboard/display.
1996-06-17 15:17:06 +00:00
8ef4845dec
merge 1.2 changes
1996-06-15 14:58:02 +00:00
a0d3ad800b
Add the version line.
1996-05-17 19:39:30 +00:00
50ecbc1c84
Rename cs_pclk_div16 to cs_brg_clk to clarify the fact that the
...
Baud Rate Generator (BRG) clock is not necessarily PCLK/16.
1996-05-17 19:32:06 +00:00
dedd4cceab
Fix typo, noticed by Curt Sampson <curt@portal.ca>.
1996-05-09 21:15:47 +00:00
69351e2be6
Changed struct ifnet to have a pointer to the softc of the underlying
...
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:35:48 +00:00
0584bf86a8
Make the MI LANCE driver standalone, and use cfattach to resolve
...
naming conflicts between bus attachments on ports that can have
multiple instances of the LANCE.
Changed struct ifnet to have a pointer to the softc of the underlying
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:32:31 +00:00
035d12359e
Remove some hacks that "went around" the linesw[] operations.
1996-04-26 18:36:54 +00:00
78403e6c0c
Add a hardware dependent initialization function lehwinit()
1996-04-22 02:25:54 +00:00
d7d306aeb7
change LANCE copy & zero functions' names to start with amd7990_, and
...
remove their 'integrate' (usually defined to be 'static') keywords.
when lance drivers are split up by attachment, more than one file will
reference the copy/zero functions (i.e. not just the file that pulls in
am7990.c... and eventually inclusion of am7990.c should go away entirely).
1996-04-18 00:25:11 +00:00
d1ca7d4c47
minor cleanup
1996-04-07 05:47:26 +00:00
83f9bdc359
update for the fact that config_found() and config_rootfound() now
...
return pointers. (Check vs. NULL, rather than just boolean tests.)
1996-04-04 06:25:00 +00:00
a77bcc1072
replaced by if_levar.h
1996-03-26 23:17:13 +00:00
f8a1588bfc
This was carved up and reincarnated as si*
1996-03-26 22:08:24 +00:00
96918eaac2
obsolete
1996-03-26 22:05:53 +00:00
2e7e6c537d
Use the traditional names (*reg.h, *var.h)
1996-03-26 22:04:14 +00:00
92d7925a57
No longer used.
1996-03-26 15:23:35 +00:00
fa59facc05
New autoconfig design that controls attach order.
1996-03-26 15:15:46 +00:00
e4b4200e43
Take advantage of the new config attach stuff by
...
splitting out the obio and vme support code.
Also move it back to the traditional name (si).
1996-03-26 15:01:10 +00:00
3d58330322
No longer need rd_match_hook.
1996-03-26 14:58:47 +00:00
fa2d8c6e76
New driver for handling the memory error interrupt.
1996-03-26 14:57:43 +00:00
jonathan