christos
2c6eadc9ce
Move WARNS=3 to the Makefile.inc, and add a little const to the remaining
...
programs that did not compile before.
2005-06-27 01:00:04 +00:00
drochner
48eac6e41a
Implement a "security" command with subcommands to query the status of
...
the "security" extension and to "freeze" it. With the security extension
frozen, disk passwords cannot be set anymore, until the next hard reset.
Normally, this is the business of the BIOS, but older/buggy/embedded
BIOSes don't care. This leaves the (theoretical) possibility that a
malicious program in posession of superuser rights sets a disk password,
rendering the disk useless (or at least uneconomical to recover from).
Inspired by an article in the german "ct" magazine.
Being here, consolidate the implementations of IDENTIFY into one, and
fix an obvious alignment problem.
2005-04-12 11:40:46 +00:00
xtraeme
743ce43fbc
Kill __P(), remove main() prototype; WARNS=2
2005-01-20 15:36:02 +00:00
dogcow
72e5ae587b
Add missing SMART attribute (6, Read channel margin)
2005-01-17 13:00:32 +00:00
fvdl
08d19d088d
* don't swap the WDSMART_CYL value, it isn't needed
...
* swap the 16- and 32 bit fields of the SMART structures (where used)
Makes SMART commands work on big-endian systems.
2004-11-17 15:40:50 +00:00
soren
d353df2fed
Add offline command to usage() and man page.
2004-10-08 18:53:42 +00:00
mycroft
82f913eae9
Combine the listing of enabled/disabled features with the general listing of
...
features.
Add an "smart error-log" command to display the SMART error-log.
Add an "offline" command to run offline selftests.
2004-10-08 17:19:50 +00:00
atatat
d96c6bad93
Add some more attribute "names", taken from
...
http://freepgs.com/smart/attributes.php
which gets them from smartmontools as maintained by Bruce Allen.
Note that some of these attributes should be "named" differently
depending on the drive (point for future work?), but at least now
there are names for some of the one that were missing them.
2004-09-10 04:11:09 +00:00
atatat
2a3ef0e821
White space police
2004-09-10 03:43:52 +00:00
bouyer
502e9c8209
Add infrastructure for ATA bus commands, and implement the reset bus command.
2004-08-01 21:41:49 +00:00
mycroft
7f2778f63a
Print the raw SMART values always. These are important in a bunch of cases --
...
e.g. for the load cycle count and power-cycle count.
Also, consistently treat the raw values as unsigned.
2004-03-28 01:23:15 +00:00
wiz
4fdf521f76
It's extension, not extention. From Miod Vallat (miod at online fr).
2004-03-14 20:11:24 +00:00
jmmv
b635f565e7
Homogenize usage messages: make the 'usage' word all lowercase, as this seems
...
to be the most common practice in our tree.
2004-01-05 23:23:32 +00:00
thorpej
683cebe2c8
No longer need to include <dev/ic/wdcreg.h>
2003-12-30 19:30:39 +00:00
thorpej
a443960167
Don't need to include atavar.h
2003-12-30 19:12:35 +00:00
lha
43ac17e0cf
Extend SMART status to print temperature. Add support for printing
...
selftest log (but no code it start selftest yet).
2003-12-20 20:03:20 +00:00
yamt
020176e538
display more capabilities for "identify" command.
2003-11-30 14:07:49 +00:00
fvdl
a8930c059a
Fix various uses of NULL that should have been 0.
2003-10-21 02:30:03 +00:00
agc
c2a3b5ec84
Add NetBSD RCS Ids.
2003-06-23 11:53:35 +00:00
mycroft
654deed34e
Allow the enable command if SMART is not enabled. Duh.
...
Also, just blindly allow the disable command.
2002-09-13 18:31:41 +00:00
soren
1f8cf74815
Typo.
2002-08-15 19:17:04 +00:00
mycroft
b916651e58
Correct the check for whether SMART is enabled.
2002-08-15 18:57:51 +00:00
soren
1cbfe6af00
Print symbolic names for SMART STATUS attributes.
2002-08-06 01:16:56 +00:00
soren
1cc6ec32e5
s/smart info/smart status/ to better fit in with the standard's feature set.
2002-08-06 00:00:21 +00:00
soren
9e129fde67
Add ATA SMART reporting support from Ben Collver in kern/12787.
2002-08-05 23:29:27 +00:00
simonb
3d18c18669
Use the command set/feature *enabled* words when displaying what
...
command sets and features are enabled.
2001-09-07 16:33:50 +00:00
simonb
cdcbbc115b
ANSIfy.
2001-09-07 02:17:30 +00:00
ad
3839890ed7
errx() prints the newline for you.
2001-08-28 15:36:54 +00:00
cgd
8a986b2e96
convert to use getprogname()
2001-02-19 22:48:57 +00:00
is
9979da6cbb
Format string cleanups by Bill Sommerfeld.
2000-10-10 20:24:49 +00:00
ad
7101b4c03f
Back out previous two - didn't follow the code properly.
2000-07-13 11:24:40 +00:00
ad
08d4945681
Fix previous. From Micheal Eriksson <eramore@era-t.ericsson.se>.
2000-07-13 11:19:54 +00:00
ad
92cca24f4e
printf fmt string without %s, from OpenBSD.
2000-07-06 14:01:06 +00:00
soren
7c282714fa
Fix typo.
1999-11-01 02:30:58 +00:00
soren
94872b2ccd
Sync with scsictl: rearrange usage() and print list of commands.
1999-10-29 23:07:43 +00:00
jwise
14fe747212
Code to check for cooked device names was failing even if it succeeded in
...
opening the cooked device. Also some typos.
Fixes part of PR bin/6883 from Soren S. Jorvang.
1999-02-24 18:49:14 +00:00
kenh
2e09168cb1
Implement a new command: "checkpower". Returns the current power management
...
mode of an ATA device.
1998-11-23 23:02:58 +00:00
kenh
1074143fcc
Fix a warning that shows up on big-endian machines.
1998-11-20 18:27:40 +00:00
kenh
d5b0705044
wdctl -> atactl
1998-11-19 23:54:59 +00:00
