3cb556defb
Disable DMA by default on the 4/100 `sw' controller. I've had a couple
...
of reports of data corruption, and would rather be slow and safe until
the DMA bug is fixed.
1996-01-09 02:06:50 +00:00
5b39541e48
New generic disk framework. Highlights:
...
- New metrics handling. Metrics are now kept in the new
`struct disk'. Busy time is now stored as a timeval, and
transfer count in bytes.
- Storage for disklabels is now dynamically allocated, so that
the size of the disk structure is not machine-dependent.
- Several new functions for attaching and detaching disks, and
handling metrics calculation.
Old-style instrumentation is still supported in drivers that did it before.
However, old-style instrumentation is being deprecated, and will go away
once the userland utilities are updated for the new framework.
For usage and architectural details, see the forthcoming disk(9) manual
page.
1996-01-07 22:01:38 +00:00
d35bd4bb23
Fix a typo that would bite if the interrupt level were wildcarded in the
...
kernel config file.
1996-01-04 00:20:19 +00:00
6d6c652f18
New driver for the Sun SCSI-3 VME and 4/100-series SCSI "Weird" controllers,
...
utilizing David Jones' new MI NCR 5380 code. Ported from the sun3 ncr_si.c
and "sw" DMA code written by me.
This driver contains user-configurable "options", which can be set via the
"flags" directive in the kernel configuration file. By default, only
DMA is enabled. DMA completion interrupts and reselection may be enabled
by setting the appropriate bits with "flags". See si.c for details.
Note that DMA completion interrupts and reselection don't yet work on the
4/100 controller. I don't know why, and it's unlikely that I'll have
the opportunity to find out any time soon. DMA does work, and results
in a considerable performance increase.
DMA, DMA completion interrupts, and reslection all work on my 4/260 (VME)
system with modern SCSI-II disks.
1996-01-01 22:40:56 +00:00
3da4b2a160
The IST_* and IPL_* constants are not bus-specific; don't treat them as such.
...
Change splimp -> splnet in Ethernet, ARCnet, and FDDI drivers.
1995-12-24 02:29:35 +00:00
644c68a706
Towards machine independency, per cgd: macros to access hardware registers.
1995-12-18 23:58:31 +00:00
0d1981416d
Adapt to changed mapiodev() interface.
1995-12-11 12:43:14 +00:00
f840d96cfe
Adapt to changed mapiodev() interface.
...
Use new DVMA routines.
1995-12-11 12:40:20 +00:00
7987c7fce9
Use `def_width' and `def_height' as default values when getting rom properties.
1995-12-10 22:55:32 +00:00
494a9b9eb9
Use the MI LANCE code.
1995-12-10 10:15:06 +00:00
480398f38e
dvma_malloc => malloc/dvma_mapin. (not the most elegant solution, but it'll
...
have to do for now).
1995-12-06 22:40:22 +00:00
8a1606d530
Don't return `XS_DRIVER_STUFFUP' too easily; this can hose buffer cache
...
writes. Say XS_TIMEOUT in stead so the scsi code will retry.
1995-12-01 01:00:55 +00:00
ee08e9085b
Extend the size of the "soft" FIFOs which reportedly reduces the number
...
of FIFO overflows on high baud rates.
However, doing so on all 4 ports would cost a whopping 64KB (at 4096 entries
per FIFO) of kernel memory. So, the FIFOs are now allocated at attach time
allowing the size for the keyboard and mouse ports to be reduced (to 128)
which should be adequate for the 1200 baud they use.
1995-11-29 23:41:31 +00:00
12bfe2e68e
Must change `u_long' to `u_int32_t' as Jason pointed out.
1995-11-29 22:03:53 +00:00
e9a919b88f
Code from Jason to better configure /dev/fb.
1995-11-29 01:45:36 +00:00
ce474272f1
Prevent synch negotiation on ESP100 chips
1995-11-28 22:49:31 +00:00
9bf3251e46
Lots of major and minor bug fixes and changes.
...
- properly do MSG_IN handshaking, so we can actually receive multi-byte msgs.
- do synch negotiation (now that the above works).
- handle disconnects.
There are a few trial-and-error bits at points where the docs I have are
particularly ambiguous about the state of chip and/or SCSI bus.
Things to do:
- more cleanup
- deal with MSG_OUT phase better
- keep some "config reg 3" bits per target (ie. FASTCLK and FASTSCSI).
1995-11-28 20:49:12 +00:00
def161af38
Careful with signed chars (caddr_t *!).
...
Merge in 1.1 changes.
1995-11-28 20:26:59 +00:00
c7d1d39b3e
dk_device => device in controller structure (noted by Jason Thorpe).
1995-11-11 21:12:50 +00:00
996526aa02
Make error recovery actually work, i.e. don't hang on SCSI bus resets
...
and re-synchronize before re-scheduling pending operations.
Things seem to be a fair bit stabler now.
1995-11-03 16:47:43 +00:00
bbdb422873
Stop DMA before resetting
1995-11-03 16:34:12 +00:00
c0a156c9fd
Map pixels in VME32 space
1995-10-28 23:15:16 +00:00
e4fcc8ab5a
Move DMA chip draining to dmaintr() and drain when a (possibly partial)
...
transfer ends in stead of doing it before starting a new transfer.
Use a different CSR bit to wait for "chip not busy" (may be necessary to
make this conditional on chip revision).
1995-10-24 16:26:54 +00:00
a3f2bf19e4
Various:
...
- make esp_poll() approximate the given timeout value.
- introduce esp_abort(), and use it for timed out commands; make targets and driver less confused.
- make {free,ready,nexus}-list management somewhat more coherent.
- make sure we only proceed down the state machine in espintr()
if there really is an interrupt pending.
1995-10-24 16:03:57 +00:00
7a9ddaff33
On-board bwtwo diddles a system enable register bit for video, per Jason
...
Thorpe (PR#1672).
1995-10-23 23:35:03 +00:00
c4dc969b09
Point `bootdv' at the disk device instead of the controller (from Jason Thorpe).
1995-10-09 22:33:07 +00:00
53eb8f8175
RASTERCONS now works on sun4's too.
1995-10-09 15:39:34 +00:00
1ad1d128e3
Fill in `ascent' values correctly.
1995-10-08 19:31:44 +00:00
87a0c55d23
Patch from Jason to factor out a common framebuffer size determination
...
routine from the individual drivers.
1995-10-08 01:39:13 +00:00
aea329df61
rcons: rc_maxcol and rc_maxrow were swapped.
1995-10-05 13:16:57 +00:00
c8f10b184c
Do not set `ra_len' in bwtwomatch(); we only need the pixels for CONSOLE,
...
but if so, we need the lot.
1995-10-05 00:33:23 +00:00
b79dc038d5
Machine dependent RASTERCONSOLE font definition to be passed to rcons_init().
1995-10-05 00:02:54 +00:00
d19cacbb03
RCONSOLE => RASTERCONSOLE.
1995-10-04 23:35:13 +00:00
32c023995c
Bring reset logic into interrupt state machine.
1995-10-03 17:32:12 +00:00
fcc53878ca
Make fbrcons_init() resistant against SUN4s.
1995-10-02 21:48:21 +00:00
cfbe993b9b
Update to use <machine/cgtworeg.h>
1995-10-02 21:44:51 +00:00
38d1101ad3
Silly me.. there's already a <machine/cgtworeg.h>
1995-10-02 21:44:22 +00:00
fb58a99a8f
Fix some bogus calls to {read/write}disklabel().
1995-10-02 21:04:45 +00:00
82434458cc
Get some of the bugs out. Thanks to David Gilbert for testing.
1995-10-02 09:07:03 +00:00
b47de9fb69
new "xy" disk device driver from me.
...
the "xy" driver runs Xylogics 450/451 SMD disk controllers.
1995-09-25 20:35:14 +00:00
1779adf6be
minor cleanups:
...
- don't let pcyl go unassigned if we have a non-sunos disklabel.
if nothing else, guess pcyl = ncyl + acyl.
- don't use bogus disklabel data if disk label is invalid
(xdgetdisklabel() now returns if label was ok or not).
- move xddriver decl. before start of actual code (cleanup).
1995-09-25 20:12:44 +00:00
2aff99a206
bug fix: xddummystrat() was clearing all but B_BUSY when it should
...
have been clearing just B_BUSY (s/B_BUSY/~B_BUSY/). this
fixes hard hang when reading disklabel when booting system.
minor clean up: added a few prototypes and only fool with bootpath
if booting the system (in xdattach).
1995-09-25 16:02:09 +00:00
4408ec71bf
init bad144 table before we actually try and read anything from the
...
disk, rather than init'ing after reading block 0 [in case we get an
error reading block zero].
1995-09-24 00:27:59 +00:00
4025edc861
Make this compile again by calling readdisklabel() with a dummy strategy routine.
...
XXX - need some reorganization to this from xdopen().
1995-09-18 23:26:39 +00:00
c5bc107461
cgtwo framebuffer, cloned from cgthree.c and sun3's cg2.c.
...
Note: untested, shall be considered a framework to get things started..
1995-09-17 20:53:43 +00:00
c92d076f5b
Change interface to th `fb' pseudo device to not need the major device
...
number (a la sun3).
Put in new glue for rcons.
1995-09-17 20:43:39 +00:00
db43cabe32
Re-instate configuration print routines, following Chris' suggestion.
...
Only prints something if there's no scsi bus to attach.
1995-09-14 20:38:53 +00:00
9d7c17bfcb
We have no need for `esp_print()'; the only child we expect is a `scsibus',
...
and there's nothing to say if it isn't there. Returning -1 is an error
anyway as noted by Chuck Cranor.
1995-09-11 19:41:21 +00:00
0a5ab32e3d
We have no need for `si_print()'; the only child we expect is a `scsibus',
...
and there's nothing to say if it isn't there.
1995-09-11 19:35:06 +00:00
bac2393fb0
Probe config registers correctly.
1995-09-06 12:35:38 +00:00
003751356c
Patches from Jason Thorpe to deal with 4/110 scsi (PR#1422). Also includes
...
bootpath glue (PR#1414) (this needs finishing off in disksubr.c).
1995-09-03 22:21:27 +00:00
a4e214aef0
If we're the console, say so in attach message.
1995-08-29 22:26:37 +00:00
a159e45699
Support for sun4 (from Jason Thorpe).
1995-08-29 22:20:01 +00:00
15c28bc39a
Sun4s must set baud rate on the mouse port (from Jason Thorpe).
1995-08-29 22:15:35 +00:00
4bdcdaa4e3
define reserved bits in cfg2 & cfg3 registers correctly.
1995-08-29 20:05:22 +00:00
a3bb091c9e
Do bootpath matching.
1995-08-18 22:03:59 +00:00
7b7773a0c5
Use bootpath_store() to set next boot component; used in dk_establish()
...
to match `sd' devices against the PROM's boot path.
Detect DMA "overshoots" when handling odd-sized transfer sizes (e.g., xfers
from/to raw partitions), by using the "Transfer Pad" command when the
transfer count reaches zero.
1995-08-18 10:43:46 +00:00
ffbae23b6e
Set `bootdv' if booted from the floppy drive.
1995-08-18 10:30:16 +00:00
f828a4b04c
Add a debug flag.
...
Make `sc_dleft' a `ssize_t' since it's involved in a signed
comparison in esp.c.
1995-08-18 10:09:57 +00:00
0596f75779
Use actual bus names (matches Chuck's bootpath code).
1995-08-18 08:20:26 +00:00
42802ac2fa
Drop si_minphys().
1995-08-16 23:01:16 +00:00
ced95e1824
update from Chuck
1995-08-01 21:06:55 +00:00
ffe4785a58
update SCSI minphys routines' definitions to match standard minphys()
...
definition and usage.
1995-07-24 07:33:32 +00:00
f8b400c446
Change DEBUG-->AUDIO_DEBUG. PR# port-sparc/1241
1995-07-19 19:50:16 +00:00
cdbe7b1bc5
Have esp_minphys limit transfers to MAXPHYS bytes.
1995-07-13 12:45:22 +00:00
05daa72b3c
Move SUN4 console echo hack cnget() (from Chuck Cranor).
1995-07-13 12:02:19 +00:00
89cb640a97
si scsi driver, adapted from sun3 version by Jason Thorpe.
...
Note: re-arranged to use dev/ic/ncr5380* MI files.
1995-07-08 21:32:47 +00:00
576bc844e5
Support KIOC_GETLAYOUT, so other than US keyboards can be dealt with better.
1995-07-06 05:35:34 +00:00
12bdf1b787
KNFify a bit.
1995-07-05 19:55:02 +00:00
9013a7a6e2
Add xxread/xxwrite.
1995-07-05 13:34:10 +00:00
2b71eae2c7
note that most of dev/ic's contents have changed names
1995-06-28 04:30:30 +00:00
c7df493055
SMD disk driver, from Chuck Cranor.
1995-06-26 23:06:57 +00:00
47ce042b76
Small optimisation & 1 fewer depedency on zs_ctty.
1995-06-26 21:45:31 +00:00
45eb69b276
Use ZS_DELAY() in a few more places (from Gordon Ross, cf. sun3/dev/zs.c).
1995-06-26 21:32:51 +00:00
ad8e3ed225
Sync with net/if.h
1995-06-23 13:19:44 +00:00
c0c45bba22
Try to recover from multi-byte messages sent by a target for which we
...
get an "Illegal command" (why is this?) when we try to pull it in.
On detection of this condition, we reset the SCSI bus and simply stop asking
this target for an identify messages, for now.
1995-06-02 15:46:47 +00:00
4770e5e7c5
Try to recover from multi-byte messages sent by a target for which we
...
get an "Illegal command" (why is this?) when we try to pull it in.
On detection of this condition, we reset the SCSI bus and simply stop asking
this target for an identify messages, for now.
1995-06-02 13:43:30 +00:00
8066369f08
Deal with v.3 proms (sigh).
1995-06-01 14:36:17 +00:00
06ffffda03
Propagate bootpaths
1995-05-27 08:12:51 +00:00
92414dd1c7
Use a different method to discriminate a 82077 from a 82072 (from Chris Torek);
...
using the NE7CMD_VERSION command is too unreliable.
1995-05-20 20:03:37 +00:00
c3d5b45b6e
Name fd register structures more appropriately.
1995-05-20 19:59:52 +00:00
ed9d5444a2
Really test # of status bytes.
1995-05-16 17:02:00 +00:00
e01c46144d
Minimalist implementation of KIOC[SG]KEY.
1995-05-10 16:04:55 +00:00
7d244351cf
Add `evcnt' field.
1995-05-04 19:43:27 +00:00
0c8be3a288
Make sure kbdopen() ships the keyboard reset cmd.
1995-05-02 07:56:42 +00:00
1138c9d047
Handle KIOC[GS]LED ioctls; from Lon Willett.
1995-04-27 14:27:11 +00:00
8d90aefeb0
New audio driver from Rolf Grossmann.
1995-04-25 20:05:32 +00:00
6d68e2f26f
Remove duplication of code from subr_autoconf.c
1995-04-25 19:59:49 +00:00
700118da76
Stop-gap measure to prevent panic when select()ing on /dev/console.
1995-04-25 17:52:43 +00:00
64f2d35a0f
Do not report each pseudo-DMA overrun as a (soft) error.
...
Add a small heuristic to converge on an acceptable threshold value.
1995-04-25 14:44:44 +00:00
87beda7b2a
Implement zstty().
1995-04-21 15:51:26 +00:00
785f352260
Do a probe in fdmatch() to guard against dumb PROMs.
1995-04-13 20:24:36 +00:00
a98a7ab7f8
Use arp_ifinit().
1995-04-12 08:47:21 +00:00
ee451261d8
iestart() returns nothing.
1995-04-11 09:18:09 +00:00
369e66a776
Sync with the rest of the world.
1995-04-11 06:03:36 +00:00
e41d4f5e96
Undo accidental change.
1995-04-11 02:42:23 +00:00
0c3bca646e
Move CHAN_[AB] into here, and prefix with ZS_.
1995-04-11 02:38:16 +00:00
2753eeb55e
zsreg.h --> z8530.h
1995-04-11 02:30:53 +00:00
9b0d3f54e8
Move this into a generic location.
1995-04-11 02:29:25 +00:00
68c8c80929
kernel_pmap --> pmap_kernel()
1995-04-10 16:48:27 +00:00
66845e73cc
cn_tty is unneeded.
1995-04-10 10:23:49 +00:00
795010b56c
map --> mmap
1995-04-10 07:04:18 +00:00
d64b72d064
Fdclose --> fdclose
1995-04-10 07:01:31 +00:00
2e1b0cc690
Adapt to if.h changes.
1995-04-09 12:36:22 +00:00
8161907540
Add evcnt_attach().
1995-04-07 19:46:13 +00:00
03b9b4a4bb
Add a CR.
1995-03-08 20:58:05 +00:00
26cb5d939f
Move SunOS audio_info compat to <compat/sunos/sunos_ioctl.c>.
1995-03-04 09:55:40 +00:00
3edb6c02ff
Rename audio*() functions to avoid conflicts with sys/dev/audio.c; this is an
...
emergency measure, driver needs to be converted to generic audio subsystem.
1995-03-02 20:37:46 +00:00
c897fc5127
Better 4/100 support.
1995-03-01 21:09:19 +00:00
e6e777cf5d
Reorganize to use fast interrupt handler.
1995-02-22 21:37:15 +00:00
6d511104e2
Pilot sun4c floppy driver based on i386 version;
...
- same limitations as isa/fd.c: just read/write
- in need of a fast interrupt handler
1995-02-17 20:28:32 +00:00
cbbc1b0293
match/attach on sun4's obio bus, from Theo.
1995-02-17 09:47:36 +00:00
d6faa0bf9c
Working "config generic" support; from Theo.
1995-02-16 21:42:50 +00:00
f6cd1eeea7
Integrate changes from Chuck Cranor for the Sun 4/100.
...
Support for multiple register banks on SBUS devices (based on patches
from Francis Dupont).
Highlights:
romaux defines an array of register spaces.
pay attention to `vactype'.
quirks handling 4/100 idiosyncracies.
1995-02-01 12:37:21 +00:00
5a7fac721d
Handle incoming messages longer than 1 byte correctly.
1995-02-01 09:50:18 +00:00
b846c1f9cd
TIOC[SC]DTR ioctls.
1995-01-29 18:56:01 +00:00
6879dd4b85
Update based on i386 version; from Chuck Cranor.
1995-01-27 09:49:55 +00:00
81b3059a98
ESP_ID -> ESP_SELID
1995-01-07 05:17:59 +00:00
bfbd328f85
Sort.
1995-01-07 05:17:15 +00:00
2a22c853db
Adapt to changed SCSI subsystem.
1995-01-02 20:21:01 +00:00
07f33ae7d1
obio ie support by chuck and me
1994-12-16 22:01:09 +00:00
651f7c8f29
open changed again
1994-12-16 22:00:23 +00:00
e88bd9f695
obio fixes from the two chucks!
1994-12-14 22:17:18 +00:00
2717a8de7e
TIOC[SG]FLAGS from matthew green
1994-12-06 00:01:39 +00:00
12af703502
wait for ack from chip
1994-11-29 22:35:20 +00:00
1eb4763766
debug code for dma hang
1994-11-27 00:08:34 +00:00
41260b47ce
i hate ttyX-ignore-cd, but leave it here for a while longer
1994-11-26 07:36:52 +00:00
7289c28055
cnpollc function for DDB
1994-11-25 23:55:53 +00:00
3a4ca432b2
no need to turn DMA off twice
1994-11-25 23:12:44 +00:00
e62b8b3fa2
choose {w,b}{copy,zero} automatically
1994-11-25 23:11:23 +00:00
2a90e82894
wzero/wcopy moved to machdep.c
1994-11-25 23:10:47 +00:00
58117a4011
ie cards coldstart with a parity error, reset it
1994-11-23 22:28:12 +00:00
941871d6ab
XXmatch change (and a few __P() as well)
1994-11-23 07:02:02 +00:00
d3408abf29
C error
1994-11-21 01:56:38 +00:00
274a90762d
copyright/Id cleanup
1994-11-20 20:51:32 +00:00
4cd7c0f34e
reset scsi bus at attach time
1994-11-05 09:35:54 +00:00
0d4b376377
only print the vec if needed
1994-11-05 09:28:06 +00:00
edb1bc6eae
Don't mess with device if it was opened while we napped.
1994-11-03 18:57:33 +00:00
138a1d9e01
let busmatch print the level/vec
1994-11-02 23:16:28 +00:00
48347d17d4
cleanup
1994-11-02 23:16:02 +00:00
46f66f22e0
ioctl u_long cmd
1994-11-02 04:55:47 +00:00
e3b33c7c21
add wcopy/wzero, and ack VME using ldcontrob
1994-11-02 04:55:20 +00:00
bdcab43fb8
ioctl u_long cmd; and KNF
1994-11-02 04:54:19 +00:00
1e951824c4
Clean up deleted files.
1994-10-30 18:43:27 +00:00
89a7412206
KNF
1994-10-30 18:43:21 +00:00
58f5cef745
repair a type
1994-10-28 16:50:59 +00:00
f3299b1470
obio/vme16 Intel Ethernet driver by Chuck Cranor. works on vme16.
1994-10-26 07:11:16 +00:00
9773a7aa40
working vme16/32 support
1994-10-26 07:09:41 +00:00
2fb5b874a1
sbus_establish() is sun4c/sun4m specific
1994-10-15 08:57:20 +00:00
3ae3c206d7
mapiodev takes a bustype argument now
1994-10-15 05:48:47 +00:00
425833d1b0
sun4/300 support works
1994-10-02 21:59:56 +00:00
1be17e489e
sbus/* --> dev/*
...
deal with multiple bus types (start of vme/obio support)
1994-09-17 23:57:27 +00:00
152b1d19d4
obio bus driver, for dealing with devices on the sun4 motherboard.
1994-09-17 23:49:58 +00:00
1340faab13
Replacement esp (NCR 53C9X + LSI DMA) scsi driver from Peter Galbavy.
1994-09-17 23:48:32 +00:00
9670b47cb7
sun4: don't use openprom
1994-08-25 20:57:38 +00:00
34c6caac77
first cut at sun4 on-board io bus
1994-08-24 09:16:46 +00:00
ad457d7aaf
sun4 needs software delays for register accesses
1994-08-20 09:11:02 +00:00
bdf0a4caf3
fix for bug #403 from <grossman@informatik.tu-muenchen.de>
1994-08-13 08:53:38 +00:00
341769b598
Clean up deleted files.
1994-07-21 22:06:05 +00:00
c772691a6a
make X11R5 compile easier
1994-07-21 22:05:42 +00:00
12c6ff514b
need vm/vm.h
1994-07-04 21:37:20 +00:00
7bb91385ad
tmd2/rmd2 have bits which must be set to 1
1994-07-02 01:10:05 +00:00
c17a1b4ce3
sun4c -> SUN4C
1994-06-24 08:11:53 +00:00
639b0ab102
cast to make compiler happy.
1994-05-27 08:49:13 +00:00
f79d935940
new from torek; now multiple drives will work
1994-05-27 02:38:15 +00:00
66628ced32
t_stop has been erradicated
1994-05-19 06:53:07 +00:00
b0b840abb9
use ether_input
1994-05-17 17:27:06 +00:00
a0cc222313
TIOCSBRK/TIOCCBRK
1994-05-14 06:39:05 +00:00
7c61a93844
new from 4.4-lite
1994-05-13 20:11:06 +00:00
592a166c31
play nice with new tty code
1994-05-13 20:09:00 +00:00
3e95b2b78d
update from lite
1994-05-07 01:14:39 +00:00
4929024bf5
timeout and ndflush casts
1994-05-05 09:53:37 +00:00
614fc7ff46
space/tab garple
1994-05-05 07:53:04 +00:00
eb1a3c8561
stub fix
1994-04-22 13:19:13 +00:00
76a7d3f63e
my dumb bug of the week: keyboard repeat fritzed if you typed ^@
...
and repeated that character forever
1994-04-16 11:18:58 +00:00
6c40e67ce7
darn, whoops
1994-04-13 11:01:58 +00:00
45125992e7
support mmap() at 0x04000000; fb_size should be rounded up.
1994-04-12 07:46:13 +00:00
44ce4e5eb0
small optimization
1994-04-10 21:02:23 +00:00
05b47471a9
keyboard repeat code!
1994-04-09 22:29:21 +00:00
887f77edc0
MULTICAST is standard now
1994-04-08 01:14:24 +00:00
78ceee0372
DDB support
1994-03-23 10:43:20 +00:00
c0cf4434ea
kbd is now a pseudo-device
1994-03-03 13:17:14 +00:00
afbbc16f69
fix rcsid
1994-03-03 12:22:04 +00:00
e592a9cb39
fix comment
1994-03-03 12:19:13 +00:00
80cff20936
whoops
1994-02-27 19:49:11 +00:00
5a99cb799e
fake out KIOCLAYOUT
1994-02-27 09:09:50 +00:00
59afe6ad54
ioctl takes a proc *
1994-02-14 09:37:11 +00:00
833c2e1c78
ether_input() takes ether_type in net byte order now
1994-01-24 00:30:29 +00:00
2dcf572fc2
fbio.h is in machine/
1993-11-30 20:55:12 +00:00
a17ccec482
fbio.h is in machine/
1993-11-29 06:14:55 +00:00
beab56ab90
new from torek:
...
add torek's comments to my DMA_DRAIN fix
1993-11-12 00:50:48 +00:00
c9f2e616f8
from torek:
...
new brooktree dac code
hacked cgthree code
new cgsix (ala GX) code
1993-11-11 03:36:48 +00:00
d9debd8a1b
s/cntty/cn_tty/
1993-11-10 15:06:41 +00:00
80a1356c75
DELAY(1) after a DMA_DRAIN, to let the esp chip have a chance to
...
recover from the DMA.. seems to let my ss1+ work with the cache enabled.
+ also esp reset code from Torek.
1993-11-05 12:41:54 +00:00
6548614b2e
if_init goes away.
1993-11-05 10:51:50 +00:00
e8c24a667b
sys/dev/scsi -> sys/arch/sparc/scsi.
1993-10-27 18:14:16 +00:00
9b8b095ea1
fix typos
1993-10-13 03:27:52 +00:00
2ab4b5e978
fixups for dynamic tty allocation:
...
cdevsw[]->d_ttys must be initialized
XXstop() functions must be callable from cdevsw[]->d_stop
the console tty is used before vm system is up, and must
allocate it's own clists..
1993-10-13 02:36:39 +00:00
a851f1b5f1
bwtwo.c, cgthree.c: sys-fbio.h -> machine/fbio.h
...
if_le.c: #ifdef MULTICAST some things, and do arp the old way
1993-10-11 02:45:49 +00:00
2e78184935
cons.c, zs.c: tty->t_stop doesn't exist here. I think it goes through d_stop
...
automatically now, but have not checked.
l_ioctl() has no last parameter 'p'
fb.c: move sys/fbio.h to machine/fbio.h
various: typecast parms for timeout() properly
zs.c: extra level of indir in cdevsw[]->d_ttys
1993-10-11 02:36:38 +00:00
4588caefaa
Chris Torek's sparc port. Missing lots of things.
1993-10-02 10:22:00 +00:00
thorpej