timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
resource allocation.
- Insertion and removal of callouts is constant time, important as
this facility is used quite a lot in the kernel.
The old timeout()/untimeout() API has been removed from the kernel.
on an A1200 yet. Configuration of wdc/atapi in GENERIC is currently
commented out to prevent the suprise of an IDE drive changing from sd0
to wd0 (and the first real SCSI drive changing from sd1/sd1 to sd0).
This is not strictly necessary, as
- at least for the Ricoh chip in the A3000 and A4000, as those chips' Y10
registers happily continue to count up from 0xA if manually incremented
past 0x9.
- the Amiga ROMs and "setclock" commands seem to interpret 0xA 0x? like
200?, etc.
However,
- the Amiga setclock writes the modulo 10 value into the chips
- the chip docs of both chips, including the Y2K information of their
manufacturers, only refer to the range 0-9
- the chips increment from 9 to 0
So we better conform to this, to avoid unpleasant surprises.
This avoids a zero pointer dereference, which fixes PR 8571.
Make sbic_dmago() report selection timeouts to the upper layer.
This makes sbic really work again with 1.4L.
by saving the last written FIOSVIDEO/GRFIOCBLANK value into a shadow variable
in the grf_softc and returning this value on FBIOGVIDEO.
The presence of this ioctl is needed by screenblank(8) nowadays.
Original problem reported by Lars Hecking on the port-amiga mailing list.
that is priority is rasied. Add a new spllowersoftclock() to provide the
atomic drop-to-softclock semantics that the old splsoftclock() provided,
and update calls accordingly.
This fixes a problem with using the "rnd" pseudo-device from within
interrupt context to extract random data (e.g. from within the softnet
interrupt) where doing so would incorrectly unblock interrupts (causing
all sorts of lossage).
XXX 4 platforms do not have priority-raising capability: newsmips, sparc,
XXX sparc64, and VAX. This platforms still have this bug until their
XXX spl*() functions are fixed.
mode. On this chip, we need to access some registers to set the text plane,
which messes up the graphics setup.
This should fix the grf3 problems reported by several people.
Michael Hitch and Joerg Lehners analyzed the problem and provided the fix.
bus. Without this, cbiiisc used to hang if nothing was connected.
Reported by Matthias Scheler. A similar method to avoid this was suggested
by Ralph Schmidt.
directly, call the function pointer (*if_input)(ifp, m). The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary. Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
frueauf