Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
62,121 Commits 606 Branches 0 Tags 3.1 GiB
c2150bf8bf
Commit Graph

7278 Commits

Author SHA1 Message Date
thorpej
d788e0dbad Make sure to initialize xs->req_sense_length (to 0). This appears to be 
a historical leftover, and very few drivers actually look at it.  But the
PCI `ncr' driver does, and if this field is not initialized to its default
value, that driver will fall over flat on its face when it attempts to get
sense data from a target.
 2000-02-28 17:44:20 +00:00
takemura
32817a3257 WSMOUSE_SCALIBCOORDS had not worked because ioctrl code was wrong. 2000-02-28 12:34:31 +00:00
joda
c627d45cc3 (fxp_init): don't clear the FXPF_MII flag as this results in a panic 
when detaching
 2000-02-28 10:16:17 +00:00
jdolecek
86ae2ab1fc Add ADEV_NOSENSE quirk for HITACHI CDR-7730. 
Patch sent by Hume Smith in kern/9489.
 2000-02-28 09:46:25 +00:00
mycroft
a87f80ad5f Give the VPP bits better names. 2000-02-28 07:33:08 +00:00
mycroft
17f933f6ce Add missing break that hosed multicast. 2000-02-28 06:44:52 +00:00
enami
d2b929f576 Fix naming think-o. 2000-02-28 05:30:19 +00:00
enami
8841a11f4d - Disestablish an interrupt if failed to enable the card. 
- If card isn't enabled, just set given information into softc.  Addresses
  PR#9457.
- Some cleanups and cosmetic changes.
 2000-02-27 23:10:51 +00:00
enami
71df610aeb Remove no longer necessary workaround for hpcmips. 2000-02-27 22:57:20 +00:00
augustss
10d9610df8 Make this driver actually work in NetBSD. From Castor Fu <castor@geocast.com> 2000-02-27 22:15:24 +00:00
augustss
7b4eccb432 Use DPRINTF for debug messages. 2000-02-27 21:06:55 +00:00
augustss
739151c214 Regen. 2000-02-27 20:44:22 +00:00
augustss
741c59a303 Add the QuickShot Strikepad game-pad. 2000-02-27 20:43:53 +00:00
augustss
45b36632c0 Add code (off by default) to keep track of the signal strength of the last 
few packets received from different MAC addresses.
 2000-02-27 20:40:42 +00:00
mycroft
61cc77895b Some minor cleanup to the probe code. 2000-02-27 20:01:05 +00:00
uch
20e5cfa32f Billionton Systems Inc. LNT-10TN card. 2000-02-27 11:15:47 +00:00
uch
d386caeaec regen. 2000-02-27 11:14:43 +00:00
uch
663c327808 Add Billionton Systems Inc. LNT-10TN NE2000 Compatible card. 2000-02-27 11:14:03 +00:00
mycroft
9a06ea04a2 Fix the same race condition while initializing the socket. 2000-02-27 03:25:03 +00:00
mycroft
7794bfe183 Reorder the usage of intr_establish/intr_disestablish with respect to setting 
the CSC_INTR register, to insure that the IRQ is not left floating and enabled
at any point.  Eliminates stray interrupts during the IRQ probe.
 2000-02-27 03:08:00 +00:00
oster
8c46e74418 Nuke some debugging output that got left in by mistake. 2000-02-27 02:35:33 +00:00
oster
82419f5ae9 Only mark the components as CLEAN if it's the last thing we're doing. 
Marking them CLEAN earlier is (currently) asking for trouble.
(XXX This could have been done more elegantly.)
 2000-02-27 01:50:22 +00:00
mycroft
a3ae8af043 Allow a flag to be set to force polling for socket events. 2000-02-27 00:14:27 +00:00
uch
16c31080a5 IT8368E legacy mode requires mode change between I/O access and 
attribute memory access. XXX
 2000-02-26 19:02:22 +00:00
oster
d9c47013b2 Defopt 'RAID_AUTOCONFIG'. Adding 'options RAID_AUTOCONFIG' turns on 
the component auto-detection and auto-configuration of RAID sets.
Also, add "#options RAID_AUTOCONFIG" to the GENERIC config files.
 2000-02-26 17:35:33 +00:00
thorpej
6f1701b01c Put a lock on the pcic, to serialize access to the chip during event 
handling.  This is important when multiple cards are present when
the system boots, as we use tsleep now instead of delay in various
places (delay used to provide serialization by virtue of not causing
a context switch).
 2000-02-26 17:24:44 +00:00
itojun
beecfd4814 cnw is 8bit-only card. map memory region as 8bit only. 
(there are so many 8bit-only card fixes.  don't we have some hint on cis tuple?)
From: feico
 2000-02-26 05:34:43 +00:00
thorpej
52169104c5 Fill in the softc's bus space tag (OOPS!). 2000-02-26 05:11:27 +00:00
mycroft
78171a3a3e I told them not to use IST_LEVEL here. Now PCMCIA works on my AS200. *sigh* 2000-02-25 20:48:22 +00:00
mycroft
49f1a84ad6 Be even more careful about cleaning up the socket at boot time. 
Also, nuke the windows when the socket is disabled.  (They might be deallocated
and reallocated, and would thus cause a conflict.)
 2000-02-25 20:45:43 +00:00
oster
caa3932441 Minor cleanups. Remove extra debugging printouts. 2000-02-25 20:11:00 +00:00
oster
21243f6205 - ignore the mod_counter when checking to see if a component fits with the 
rest of an autoconfig set.
- minor cleanups
 2000-02-25 19:56:56 +00:00
oster
503220a18f - ignore components whose mod_counter values are too low. 
- noting the mod_counter for autoconfigured sets would be a win too.
 2000-02-25 19:56:32 +00:00
drochner
7da6407d04 add (minimal, PIO only) support for the popular "Tundra Universe" 
PCI-VME interface chip and a frontend for the "Bit3 Mod. 2706"
PCI-VME adapter
 2000-02-25 18:22:39 +00:00
mycroft
2fd2b78c1f Only call the cursor method when the cursor state is actually changing. 
This avoid corrupting VGA displays in text mode (e.g. the first character
of the prompt when you exit vi).
 2000-02-25 17:42:51 +00:00
oster
8d63540a8c When we close autoconfigured components, we need to note that they 
are no longer in 'autoconfigured' status.
 2000-02-25 17:14:18 +00:00
drochner
469464d4c8 add forward declaration of "struct extent", so the extent header doesn't 
need to be included
 2000-02-25 10:33:12 +00:00
mycroft
7dbe5be481 Disable all windows at boot time, to avoid conflicts when reading the CIS. 
Also, GC a small bit of code that's inaccesible after the previous change.
 2000-02-25 05:26:17 +00:00
mycroft
ac4c520f05 If we fail to attach the socket driver, clear PCIC_FLAG_SOCKETP so that we 
don't try to use the socket any further.  (This will only happen if the user
explicitly unconfigured some of the sockets.)
 2000-02-25 04:24:37 +00:00
itojun
1ccb9e8170 when change mbuf type, clear m_pkthdr so that we do not get panic with 
old data in pointer fields.  NOTE: we'll extend m_pkthdr field soon.

Wondering: do mbuf pre-allocation code in elink3.c really buy us much
performance?  it comes with code duplicate/synchronization problem with
sys/mbuf.h...
 2000-02-25 03:39:13 +00:00
oster
a4f7f062fd - cleanup raidinit() 
- cleanup rf_mountroot_hooks()
- various other cleanups.
 2000-02-25 02:42:30 +00:00
oster
5716b5d6d1 Be *slightly* more consistent about the use of num and numraid in raidattach(). 2000-02-25 02:21:12 +00:00
groo
f5f2ad429c Initial import of National Semiconductor LM7[89] Hardware Monitor with isa and 
pnpbios attach.

examples:

	lm0 at pnpbios0 index?
	lm0 at isa? port 0x290


TODO: spinlocks, i2c interface.
 2000-02-25 02:17:43 +00:00
oster
e4e4483cb7 Fix a (slightly) bogus status message. 2000-02-25 02:06:34 +00:00
ad
c86b7572f9 Cosmetic change. 2000-02-25 00:23:57 +00:00
oster
bdd659fc7f Deal with unconfiguring components in the autoconfigure case. 2000-02-24 23:39:21 +00:00
ad
28fc2b2ee8 Add a DPT ISA HBA frontend, tested lightly with a PM2021A/9X. There are some 
issues.
 2000-02-24 18:49:06 +00:00
ad
50062f0914 - Don't use bitfields. 
- Cosmetic changes.
- Shut down all HBAs "simultaneously", not individually.
- Don't bother grokking HA_ST_MORE. It causes problems.
- Other bits and pieces.
 2000-02-24 18:47:55 +00:00
oster
aea97a5a17 Oops... Missed commmitting this last night. Thanks to Matthias Scheler 
for letting me know.
(Add the DiskQueueSW pointer)
 2000-02-24 17:12:10 +00:00
oster
e644abfe94 Make sure we close auto-configured components appropriately when 
attempting a rebuild-in-place.
 2000-02-24 04:39:41 +00:00
oster
c5961cfba3 Garbage collect some unused stuff. Include rf_kintf.h for a 
function prototype.
 2000-02-24 03:52:15 +00:00
oster
851a2cdcd8 - record the pointer to the DiskQueueSW so we can use that when 
we hot-add a spare.
- use the above info when adding a spare.
 2000-02-24 03:48:41 +00:00
itohy
5ed29fa2d6 Delete a superfluous newline in attach message. 2000-02-24 03:42:44 +00:00
oster
9e81bc058e Now that we have the information available, use the general maxOutstanding 
value for the RAID set, rather than looking at Queue[0][0] (which may not
exist).
 2000-02-24 02:55:05 +00:00
oster
99f070bab8 - mod_counter needs to get incremented more often. 
- use raid_init_component_labels instead of hand-rolling a component_label.
(missed doing this for the rf_used_spare case when updating component labels).
- fix serial number initialization in raid_init_component_labels
 2000-02-24 01:23:05 +00:00
oster
fb13ce76fc - make sure we note the parity status in the autoconfig case. 
- also, make sure we grab the serial number from the component labels
when we autoconfig.
 2000-02-24 01:22:32 +00:00
soren
df1f794536 Reflect version 1.13 of i82365_isa.c. Untested. 2000-02-23 17:22:11 +00:00
fair
7f8cdf038f Fix a missing closing parenthesis in an error diagnostic 2000-02-23 08:31:25 +00:00
haya
d94804a788 Pccbb maintains the interrupt handlers for 16-bit PC Cards 
by itself.
Add some comments.
 2000-02-23 07:28:54 +00:00
oster
d91ecfbcfd Be more aggressive about updating component labels in the event 
of a real component failure (or a simulated failure):
- add 'numNewFailures' to keep track of the number of disk failures
since mod_counter was last updated for each component label.
- make sure we call rf_update_component_labels() upon any component failure,
real or simulated.
 2000-02-23 03:44:02 +00:00
oster
e7f3dc2ec9 blockSize for the component label is already set correctly here. 2000-02-23 02:11:05 +00:00
oster
0c43bf18f0 - cleanup of more component label code 
- make current default label values available everywhere
- make sure numBlocks and blockSize in component labels get initialized
for all component labels
- check for component size to be smaller than or equal to the partition size
when autoconfiguring
 2000-02-23 02:04:21 +00:00
oster
6aaac32240 Do a better job of (re)initializing the component labels after 
a reconstruct or a copyback.
 2000-02-23 02:03:03 +00:00
oster
d84e4ed019 Make a note of autoconfigured components. 2000-02-23 02:01:55 +00:00
oster
e0ab2f3d0f Correct a comment. 2000-02-23 00:37:11 +00:00
oster
214822e08c Note the fact that the first arg of raidinit() may be bogus in 
the autoconfig case (the value of the first arg never gets used, but...).
 2000-02-22 23:13:15 +00:00
augustss
9651e60835 Fix typos in my last commit that caused the driver to panic. 
Change some (unrelated) debug messages.
 2000-02-22 22:59:49 +00:00
enami
347823e807 Include dev/isa/isavar.h so that this file compiles again. 2000-02-22 22:46:16 +00:00
chopps
dcfbcbec76 remove bogus debug (was reading unmapped CCR) 2000-02-22 21:29:36 +00:00
tls
08ef0cfe07 revert previous change 2000-02-22 21:09:50 +00:00
mjacob
64fa8aa0d6 remove SES driver 2000-02-22 17:43:57 +00:00
oster
e8ff7f6155 Bounds-check the 'last unit' a little more closely. 2000-02-22 16:07:02 +00:00
thorpej
3f9cf7572c Don't use void * for chipset tags. Bad hacker, no biscuit. 2000-02-22 16:04:44 +00:00
augustss
009856b631 Save and restore a couple ofregisters in the power hook in case BIOS doesn't. 2000-02-22 16:03:42 +00:00
pk
9e16037265 Simplify the attach routine a bit. 2000-02-22 12:24:53 +00:00
pk
b4e291e818 Fix some off-by-one errors; patch from Jonathan O'Brien. 2000-02-22 12:12:21 +00:00
augustss
9056664327 Prepare a little for having USB interrupt processing done outside the hard 
interrupt level (in a thread or a softintr).
No real soft processing done yet.
 2000-02-22 11:30:54 +00:00
augustss
6cc37002ad Fix (mostly harmless) typo. 2000-02-22 11:25:06 +00:00
augustss
2eda3cf829 Better debug info. 2000-02-22 11:24:22 +00:00
thorpej
bfaa657135 Fix printf formats on the Alpha. 2000-02-22 08:23:22 +00:00
oster
fb56415023 Add a few comments, and an indicator of whether or not an autoconfig set 
is 'rootable'.
 2000-02-22 03:39:47 +00:00
oster
bd2230fd09 - implement additional component checking before autoconfiguration 
- make component label setting work again(!!!!)
 2000-02-22 03:38:42 +00:00
enami
32f100250f Cosmetic changes. 2000-02-22 02:38:26 +00:00
enami
b785bb47a0 Establish a powerhook and make sure the card detect interrupt is enabled 
after resume from suspend, as i82365.c does.
This is a workaround for newer Sony VAIO notebook.
Patch is submitted by Atsushi Onoe (onoe@sm.sony.co.jp) in PR#9463.
 2000-02-22 02:35:26 +00:00
oster
afccbaa6d7 Umm.. let's set 'numraid' to something useful before we try to use it. 2000-02-21 23:33:45 +00:00
dbj
8f2d14fbd1 added wmesg argument to pcic_delay debug printout 2000-02-21 20:16:22 +00:00
mjacob
7f44584598 clen up some error messages 2000-02-21 19:18:53 +00:00
mjacob
296fbeed2a Patches from msouth@scruz.net to handle QIC 3220 (HP T20). 2000-02-21 05:11:09 +00:00
enami
158df7b6f1 Don't establish an interrupt if attach is in progress. Anyway, current wdc 
and its children doesn't require interrupt on attach.
 2000-02-21 03:55:22 +00:00
enami
91026fe7f2 Cosmetic changes. 2000-02-21 03:26:41 +00:00
thorpej
70bbb1b84e Sync PCMCIA memory mapping with a change from rev 1.47 of i82365.c: 
always map attr memory 8 bit, since its defined that way. (chopps)
 2000-02-21 01:44:36 +00:00
sommerfeld
3a76270201 deal with a DELAY vs. delay issue 2000-02-20 22:19:29 +00:00
mjacob
a3a129e6f5 Oops...I forgot that the GEM-2 chip is so lame that if you don't tell 
it exactly the right amount of data to transfer for WRITE BUFFER/Global
it will stay stuck in command phase (causing a command phase overrun).
 2000-02-20 21:30:44 +00:00
jdolecek
5f0b3b1510 usbd_devinfo_vp(): search the know devs array also if the device 
doesn't return product description (e.g. Kye's Genius NetScroll
	mouse returns vendor, but not product); the strings
	returned by device are still preferred to those in the array, though
 2000-02-20 14:45:05 +00:00
jdolecek
6b93b03665 regen 2000-02-20 14:39:28 +00:00
jdolecek
e710e0dfa1 Add Kye's Genius NetScroll mouse 
XXX Should the name be just "NetScroll mouse" ? Kye seems to be manufacturer
XXX for the mouse licenced from Genius.
 2000-02-20 14:37:48 +00:00
mjacob
1c4521f1da add ses.h to list of includes 2000-02-20 07:39:41 +00:00
mjacob
c5f8d33f85 minor spelling change 2000-02-20 07:38:48 +00:00
enami
6779fc2bb2 Fix thinko in previous commit. 2000-02-20 03:48:40 +00:00
enami
ac75116d32 Try other config entry on i/o space alloc failure. 2000-02-20 03:18:15 +00:00
mjacob
6f13498242 correct oops on last checkin 2000-02-19 15:13:07 +00:00
mjacob
a9697ee5f2 Handle > 12 byte CDBs. 2000-02-19 01:55:42 +00:00
mjacob
717d5b1cc3 Support for > 12 byte commands for parallel SCSI. 2000-02-19 01:54:42 +00:00
mjacob
d88aecac57 Remove residual and now broken !ISP_NO_FASTPOST_SCSI code (which was 
turning back on fast posting!). Redo fabric (re)login loop- don't try
and log out ports that haven't been logged in. Do correct target id
shuffling so we just always find the target ID we want. Add in support
for > 12 byte commands for parallel SCSI. Handle some Dual Bus reset
stuff. Finally fix ABORT COMMAND to use the right 16 bit order of the
handle to abort.
 2000-02-19 01:53:56 +00:00
mjacob
ff86abe827 Cleanup some printaouts. 2000-02-19 01:51:43 +00:00
mjacob
b6dd4ddacf Add in ISP_SWIZZLE_CONTINUATION macro. 2000-02-19 01:51:21 +00:00
mjacob
8c2e6c73e3 Handle dual bus cases for immediate notify and enable lun commands. 2000-02-19 01:50:57 +00:00
mjacob
98f7f7b5a0 Fix ITDEBUG macro 2000-02-19 01:50:25 +00:00
mjacob
77dec43b22 Clarify cd_resid tag. 2000-02-19 01:50:03 +00:00
mjacob
8405ee3752 Add in some mbox return codes that define when we've used up target 
ids for doing fabric login. Define the 'Get All Next' SNS response
structure.
 2000-02-19 01:49:47 +00:00
soren
d282f771e7 Remove redundant CIS definitions. 2000-02-18 18:55:31 +00:00
nisimura
3e02ded337 Improvement on SFB enabled copycol(); still yet under development, 
it miserably fails on corner cases.
 2000-02-18 06:51:51 +00:00
thorpej
132107ce3b Add a whole slew of registers found in the PCnet-PCI family. 2000-02-17 20:18:29 +00:00
augustss
6fa8665eeb Handle detach that happens before attach has finished. (Reported by mycroft.) 2000-02-17 18:42:21 +00:00
sommerfeld
50c84950f2 awi: rewrite to be higher performance. 2000-02-17 17:37:23 +00:00
augustss
1955c335af Regen. 2000-02-17 16:30:44 +00:00
augustss
536b31a5c8 Add Sony PCGA-UMS1 mouse. 2000-02-17 16:30:11 +00:00
sommerfeld
7adb22cfa5 Add detach support. 
Light cleanup.
 2000-02-17 15:58:32 +00:00
mycroft
f7ad1af2b5 Use bpf_mtap() correctly. 2000-02-17 05:41:41 +00:00
soren
4331d2bcaa Regen. 2000-02-16 04:29:32 +00:00
soren
021ff75015 Add Toshiba ISA bridge. 2000-02-16 04:29:20 +00:00
oster
7deba340d7 Some of these function names are bad enough that no one else would probably 
pick them, but preface them with rf_ anyway.
 2000-02-16 01:10:44 +00:00
enami
4a1320b29f Put the entry of FNW-3700T after the entry of SVEC-PN650TX 
so that SVEC-PN650TX errornously recognized as FNW-3700T.
Pointed out by Takahiro Kambe <taca@sky.yamashina.kyoto.jp>.
 2000-02-14 23:13:49 +00:00
augustss
b223c00cee Avoid linker error if no PHY is attached. 2000-02-14 20:29:54 +00:00
pk
1d373a94e2 Bump receive buffer size up to the maximum DMA burst boundary. 2000-02-14 17:14:28 +00:00
pk
a1b5434cec Make promiscuous mode go again. 2000-02-14 17:06:45 +00:00
bouyer
085f44145c - Be more strict in status check before sending a command (make sure 
DRQ is not asserted). Closes kern/9346.
- Change the "fake identify before the real one" by a delay(). The real cause
  of the problem is that the drive is unresponsive just after a reset.
  The real problem (and the solution) showed up after the first change.
 2000-02-14 12:37:35 +00:00
augustss
9558d7b27b Regen. 2000-02-13 23:10:22 +00:00
augustss
a39279da39 Add a bunch of devices. 2000-02-13 23:10:02 +00:00
ragge
520d8c032e Waked up from the dead 2000-02-13 13:01:14 +00:00
itojun
99b18eac36 on attach, check if we've got meaningful mac address or not, 
to detect io mapping problem.

on detach, handle resource deallocations more carefully.
 2000-02-13 06:17:58 +00:00
oster
445591e874 Get recent changes into the tree: 
- make component_label variables more consistent (==> clabel)
- re-work incorrect component configuration code
- re-work disk configuration code
- cleanup initial configuration of raidPtr info
- add auto-detection of components and RAID sets (Disabled, for now)
- allow / on RAID sets (Disabled, for now)
- rename "config_disk_queue" to "rf_ConfigureDiskQueue" and properly prototype
in rf_diskqueue.h
- protect some headers with #if _KERNEL  (XXX this needs to be fixed properly)
  and cleanup header formatting.
- expand the component labels (yes, they should be backward/forward compatible)
- other bits and pieces (some function names are still bogus, and will get
changed soon)
 2000-02-13 04:53:57 +00:00
augustss
0b2e81991d Avoid panic when a non-working hub is detached. 2000-02-12 23:44:16 +00:00
enami
84b6105bbe Check if device is active in wi_intr and wi_inquire. 2000-02-12 23:35:28 +00:00
ad
fc8ea8f0c5 Misplaced #endif. 2000-02-12 22:06:54 +00:00
augustss
d3fb7161d2 Regen. 2000-02-12 22:02:01 +00:00
augustss
b4fac8c7d0 Add Microsoft Internet Keyboard Pro. 2000-02-12 22:01:31 +00:00
ad
59748e7e55 Fix the unaligned accesses discovered by dbj. 2000-02-12 21:58:58 +00:00
chopps
53e6733789 awi is an 8-bit only card, so set the 8bit flag. 2000-02-12 19:58:35 +00:00
thorpej
1268cc5d6c If we got an xfer from our backlog queue, don't allow sleeping; we're in 
interrupt context.

XXX This is fixed properly in the thorpej_scsipi branch, but that won't
be ready for 1.5, I don't think.
 2000-02-12 19:12:52 +00:00
thorpej
fc72b13d27 Const poison. 2000-02-12 19:05:55 +00:00
itojun
02bf7fcd13 add wi_detach and friends so that we can hot-swap wi card. 2000-02-12 16:08:04 +00:00
oster
edc931efea Make this compile without warnings on alphas. 
(Problem noted by Aaron J. Grier)
 2000-02-12 16:06:27 +00:00
augustss
523d157a05 Regen. 2000-02-12 15:02:56 +00:00
augustss
a79d73d045 Add Corega FEther adapter. From PR 9394. 2000-02-12 15:02:21 +00:00
enami
01868857df Add activate routine and check device active flag also in one second 
tick handler.
 2000-02-12 04:05:49 +00:00
enami
fbc47bda30 Cosmetic changes. 2000-02-12 03:55:49 +00:00
mjacob
1b188ee2ff A lot of cleanup and shrinkage. Some items moved to isp_tpublic.h. 2000-02-12 02:33:34 +00:00
mjacob
55a78c1ee4 Add in 12160 (Ultra3) support. Turn back on fast posting for the new 
generateion parallel SCSI cards (1240/1080/1280/12160). Split up nvram
reading routines to be more readable. Fix topology reporting- 2200 has
connected topology in mailbox 6 when you're done getting your loop id
(supported: Private Loop (NL Port), N-Port, F-Port, FL-Port). The 2100
doens't report this, but we can synthesize it to be either NL-Port or
FL-Port. Add in some connection mode async events.
 2000-02-12 02:32:21 +00:00
mjacob
56e16448ad add in 12160 (Ultra3) related definitions 2000-02-12 02:29:00 +00:00
mjacob
9f63fdeefb add in 12160 (Ultra3) NVRAM definitions 2000-02-12 02:28:32 +00:00
mjacob
87355d841f add some Qlogic 2200 point-to-point and extended ICBOPT definitions 2000-02-12 02:26:26 +00:00
mjacob
50f2620822 add 80 MHz case 2000-02-12 02:25:28 +00:00
mjacob
3f96822c3b some minor cleanups 2000-02-12 02:24:20 +00:00
mjacob
63c56a9de6 add a more public shared i/f to target mode 2000-02-12 02:23:13 +00:00
mjacob
6eba47aa8f add (untested in NetBSD yet) Qlogic 12160 (Ultra3) suppot 2000-02-12 02:22:37 +00:00
mjacob
29f08cd82d add 12160 (Ultra3) microcode 2000-02-12 02:07:49 +00:00
simonb
2db5581a4c Declare the mcclock_pad32_busfns variable as extern. 2000-02-11 02:36:16 +00:00
thorpej
29ae6dbe05 We're given a K1SEG address already. 2000-02-11 01:32:42 +00:00
chopps
d8595b9af3 map common memory 8 bit for cis scan when following longlinks. 2000-02-10 09:01:52 +00:00
chopps
44b423d73b always map attr memory 8 bit, since its defined that way. 2000-02-10 09:00:19 +00:00
joda
d40e2b51ee add detach code 2000-02-09 22:15:57 +00:00
enami
e00270524e ASIX AX88190 support (Planex FNW-3700-T and Melco LPC3-TX) from FreeBSD/PAO3. 2000-02-09 15:40:23 +00:00
enami
67bc20747a Support Xircom CompactCard Ethernet CFE-10. 2000-02-09 14:54:53 +00:00
enami
99f529f0b3 - Since all resources are mandatory, no need to manage individually. 
- KNF some code.
- Factor out some code into function.
- Disestablish an interrupt handler when failed to enable card power.
 2000-02-09 14:42:33 +00:00
enami
dc87f2899f - No need to keep track enable/disable state here. The smc91cxx.c also 
manages it.
- Disestablish an interrupt when failed to enable card.
- Don't say I'm enabled if failed to enable card.
 2000-02-09 13:40:42 +00:00
enami
94a6dd9169 Regen. 2000-02-09 13:33:22 +00:00
enami
947c0fee74 Add an entry for Planex FNW-3700-T. 2000-02-09 13:32:23 +00:00
enami
e729d284ad Add an entry for Melco LPC3-TX. 2000-02-09 13:20:55 +00:00
enami
e92b285eaf Add an entry for Xircom CompactCard Ethernet CFE-10. 2000-02-09 13:07:45 +00:00
itohy
0a1d6b1357 Make it compile with options DEBUG. 
Reported by Kawamoto Yosihisa (PR #9379).
 2000-02-09 07:57:52 +00:00
augustss
76c14cd322 Don't stall the control pipe on error. 2000-02-08 18:46:03 +00:00
augustss
e922214fb2 Use NULL instead of 0. 2000-02-08 18:45:27 +00:00
thorpej
3bc7ce8d31 Cast bus_size_t to u_long for printing. 2000-02-08 18:40:51 +00:00
tron
73286f8d56 Fix printf() format string. 2000-02-08 18:31:02 +00:00
mycroft
2a2d421881 Forgotten part of chopps\'s i82365_isasubr.c commit. 2000-02-08 17:56:58 +00:00
mycroft
ac0db48a13 In light of the previous change, whack the clearing of CSC_INTR 
again.
 2000-02-08 17:53:48 +00:00
mycroft
eb071839ea The final read of the CSC register does not appear to be needed any 
more.
 2000-02-08 17:48:39 +00:00
chopps
d12c4012f1 deal with loops that we get stuck in due to unhandled interrupts. 2000-02-08 17:14:29 +00:00
mycroft
5abb516b1e Be more careful with the CSC_INTR register while probing. 
Make some output more specific.
 2000-02-08 16:59:52 +00:00
bouyer
f522d6f1ee Supports "USR 3CP5609 PCI 16550 Modem", from Kent Polk. 2000-02-08 16:26:23 +00:00
bouyer
b3cffb232f regen 2000-02-08 16:24:00 +00:00
bouyer
b614c6a569 Add US Robotics vendor ID, and USR 3CP5609 PCI 16550 Modem product ID. 
From Kent Polk.
 2000-02-08 16:22:37 +00:00
enami
34d63b5623 Since we now only allocate this one, no longer necessary to check and free(). 2000-02-08 12:56:00 +00:00
enami
1658944ebe - Don't rely on implicit declaration. 
- Sinc wi/ existing coding style.
 2000-02-08 12:51:30 +00:00
enami
c7573d517e - Bail out from attach stage if failed to enable card, number of iospace 
or memspace is unexpected, failed to map iospace or failed to configure
the controller properly.
- Disestablish an interrupt handler if failed to enable card.
 2000-02-08 12:49:12 +00:00
augustss
e0c519464a Add methods for ucom to call back on open/close. 2000-02-08 09:18:01 +00:00
erh
8613a0edaa Regen. 2000-02-08 06:36:46 +00:00
erh
a87f862d24 Add Allied Telesyn AT-1500, lance ethernet. 2000-02-08 06:36:29 +00:00
nisimura
42e4e9fd0c Add the missing piece of previous mod. 2000-02-08 04:35:03 +00:00
thorpej
bfdc6759fb Don't rely on the receive descriptor's BCAST/MCAST status bits. Test the 
Ethernet destination address to see if it's multicast.
 2000-02-08 00:22:13 +00:00
thorpej
52a2804a5c Add a new function call to the ISA DMA API: isa_dmamaxsize(), which returns 
the maximum transfer size for the specified DMA channel.  Make all clients
of ISA DMA use this call to determine their maximum transfer size.
 2000-02-07 22:07:27 +00:00
thorpej
fe551f0e64 Fix a bug in disksort_*() which caused non-optimal ordering when multiple 
active partitions were on a single spindle.  Add a b_rawblkno member to
struct buf which contains the non-partition-relative block number to sort
by.
 2000-02-07 20:16:47 +00:00
augustss
a534cd4254 Correct John Markus Bjørndalen's horribly mangled name in a comment. 2000-02-07 09:40:37 +00:00
augustss
a8365d0e29 Use pcmcia_devinfo(). 2000-02-07 09:36:27 +00:00
augustss
e2ab50484b Add a pcmcia_devinfo() function (akin to pci_devinfo). It generates a 
string suitable for printing in the attach message.
 2000-02-07 09:35:29 +00:00
jonathan
e9a4467c58 Fix thinko in previous revision: it wouldn't catch deassert. 
Revert the code inside the new test to the previous-but-one revision.
 2000-02-07 02:17:18 +00:00
jonathan
2da22cf2c5 Check for DCD status change interrupts which signal PPS events, even 
if the line discipline is ignoring carrier (e.g., via comparam()'s
setting of sc->sc_msr_mask).  Move PPS timestamp outside the normal
status-change processing, and ignore sc_msr_mask when testing
for PPS events.
 2000-02-06 23:23:37 +00:00
cgd
dbeafc9dbe clean up some printfs 2000-02-06 08:14:13 +00:00
nathanw
958e687d69 LP64 printf fixes. 2000-02-05 20:02:42 +00:00
chopps
6d8c9583a7 indent this file 2000-02-05 18:42:37 +00:00
chopps
101848d272 run this through indent with some comment cleanup -- more knfing needed. 2000-02-05 18:20:08 +00:00
augustss
494c9affea Support detach. 2000-02-05 18:11:55 +00:00
enami
645c869160 Add detach support for ethernet portion. 2000-02-05 04:44:00 +00:00
enami
9267b8f018 Remove unnecessary includes. 2000-02-05 04:41:49 +00:00
enami
abac10f360 Yet anothor workaround for hpcmips. I guess real problem is somewhere else... 
With rev.1.37, my MobileGearII for DoCoMo finds both ne0 and wd0
even if pcic_delay_sleep is 1.
With rev 1.40, it fails to find wd0.
 2000-02-05 04:34:36 +00:00
dante
2a46aa5d9a Fix "unused variable" warning when FAILSAFE option is defined 2000-02-04 16:23:14 +00:00
dante
b4edda97d5 Fix a compilation bug due to a missing parenthesys 2000-02-04 15:43:46 +00:00
augustss
e037c568cb Update for cardbus unmap changes. 2000-02-04 13:48:23 +00:00
augustss
1facb42e6e Make the driver work even if DIAGNOSTIC is not set. 2000-02-04 13:43:56 +00:00
dante
29be498635 Add a list of all the currently supported boards 2000-02-04 13:16:22 +00:00
enami
9c688fd57c s/SYSTEM/SYSMEM/; so that this file compiles again. 2000-02-04 11:04:46 +00:00
joda
8006211b18 fix previous broken commit of the 8-bit memory handling (spotted 
by Christian Hopps); this will enable 16-bit memory accesses for devices
that can handle it
 2000-02-04 10:18:28 +00:00
itojun
0f09f8dd2b cope with card insertion/removal during suspend-resume session. 
(removal/ insertion after suspend and before resume)

How should we deal with card swaps?
 2000-02-04 09:45:34 +00:00
enami
730f15bb19 Free resources on attach failure. 2000-02-04 09:31:07 +00:00
enami
82235a8673 Actually, no need to keep track of sc_ih. 2000-02-04 09:30:28 +00:00
chopps
2a1352a5b3 enable the card before establishing the interrupt to avoid being called 
with stray interrupts before we are ready.
clear the card interrupt after enabling the card
 2000-02-04 08:45:41 +00:00
chopps
70e711cd60 only enable interrupts from the controller if the socket is enabled 2000-02-04 08:42:47 +00:00
chopps
d344dd94ab keep track of the enabled state of a socket 2000-02-04 08:42:07 +00:00
haya
ded26ac3e4 Now cardbus_mapreg_unmap() has been implemented in 
sys/dev/cardbus/cardbus_map.c.  The detech function in
sys/dev/cardbus/if_tlp_cardbus.c uses cardbus_mapreg_unmap().
 2000-02-04 07:59:20 +00:00
explorer
59db45db2a bring over WEP mode from FreeBSD/OpenBSD 2000-02-04 07:48:29 +00:00
explorer
4a5667f967 undo part of the previous commit. I'll just steal the code from freebsd, 
to minimize differences between the drivers.
 2000-02-04 06:22:52 +00:00
chopps
9ff702157c doh, remove debugging leftover (forcing irq 15 to always be avail). 2000-02-04 05:30:55 +00:00
enami
af9710cf6e Disestablish an interrupt if failed to enable the card. 2000-02-04 04:54:51 +00:00
enami
ed0f41807d - Call if_deactivate instead of smc91cxx_disable when deactivating. 
- Fix typo in comment.
 2000-02-04 04:05:50 +00:00
enami
6f28840935 Remove no longer necessary old code. 2000-02-04 03:40:00 +00:00
enami
3ff6804bdd Release the resource on attach failure. 2000-02-04 03:38:06 +00:00
explorer
de4f36ae63 Add encryption structure definitions -- it's interesting tht the gold card 
has 128 bit encryption, but the key space is 14 * 8 bits, or 112 bits...
I wonder where the other 16 bits comes from?
 2000-02-04 02:03:02 +00:00
cgd
942a54e0c1 replace the *_lookup table entry match/lookup functions in all of 
these drivers with a single common function (which supports tables
of variable-sized structures).  Things are mostly as they were before:
tables are terminated by entry with NULL name, etc.  There's also
the ability to call a driver-specific match function which can be used
to augment the table lookup.
 2000-02-04 01:27:12 +00:00
enami
0bff6e573a Cosmetic change; use IRQUNK instead of -1 always. 2000-02-03 23:03:11 +00:00
chopps
71d64756c2 wrap optimized copy routines in an ifdef 2000-02-03 21:27:35 +00:00
dante
cbacaf54d7 Add AdvanSys U2W (LVD) boards support 2000-02-03 20:28:26 +00:00
dante
fd2fd888ef Add AdvanSys U2W host adapters 2000-02-03 16:56:23 +00:00
dante
787999d9e4 Add AdvanSys U2W boards 2000-02-03 16:51:42 +00:00
itojun
579e538de0 fix promisc mode for smc91cxx again. 2000-02-03 16:20:49 +00:00
joda
5b67628108 regen 2000-02-03 13:58:55 +00:00
joda
1533d39d9e 2 Micro -> O2 Micro 2000-02-03 13:58:28 +00:00
enami
1102c5ed1d Remove temporary workaround for hpcmips. Now it works without it. 2000-02-03 09:00:39 +00:00
enami
d6554f3e25 Cosmetic changes; remove unnecessary semi-colon. 2000-02-03 08:59:20 +00:00
enami
d6df5ce334 Make the product lookup table driven. 2000-02-03 08:52:21 +00:00
enami
f1ce315cc0 Regen. 2000-02-03 08:26:33 +00:00
enami
fc92de5f92 Add an entry for Icom WAVEMASTER SL-200. 2000-02-03 08:25:55 +00:00
nisimura
c6641d91a8 Merge IOASIC register definitions. 2000-02-03 08:13:44 +00:00
thorpej
44a20a6c96 If we read a bad header signature, report what we read. 2000-02-03 06:47:31 +00:00
thorpej
5802ccb9c9 In ahc_intr(), if initialization failed, don't try to service the 
interrupt.
 2000-02-03 06:25:09 +00:00
thorpej
a084fd2f81 Some PHYs go off into left field for a few seconds if you attempt to kick 
autonegotiation while it's already enabled.
 2000-02-03 06:11:13 +00:00
chopps
68a7084f0c attempt to make this more like the std indicates 2000-02-03 06:07:06 +00:00
enami
20522c36ed Detach MII if there is. 2000-02-03 06:03:39 +00:00
thorpej
9ff57fe506 Oops, missing return; 2000-02-03 05:38:57 +00:00
nisimura
8e27abd255 Use bus_space_{write,read} for IOASIC register access. 2000-02-03 05:16:30 +00:00