jhawk
1e59d99d28
For all network drivers that call ether_ifattach(), and also
...
have _detach() functions:
Ensure that softc keeps state about whether the attach succeeded,
and make the detach function return immediately if the attach did
not complete.
2000-05-29 17:37:12 +00:00
thorpej
692e54c43d
Use ether_crc32_be().
2000-05-12 16:44:19 +00:00
ws
7da71e5f9e
Make IPKDB working again.
...
Add support for i386 debugging and pci-based ne2000 boards.
2000-03-22 20:58:25 +00:00
ws
1b83998bd7
Add bus_space_barrier.
...
Add DELAY in some busy loops to allow the dma engine to actually do something
(neccessary on fast processors).
2000-03-22 18:02:59 +00:00
enami
e00270524e
ASIX AX88190 support (Planex FNW-3700-T and Melco LPC3-TX) from FreeBSD/PAO3.
2000-02-09 15:40:23 +00:00
enami
99f529f0b3
- Since all resources are mandatory, no need to manage individually.
...
- KNF some code.
- Factor out some code into function.
- Disestablish an interrupt handler when failed to enable card power.
2000-02-09 14:42:33 +00:00
itojun
7a7a3bcfdf
handle attach failure in ne/pcmcia more carefully. (otherwise we'll
...
have trouble on detach)
2000-02-02 13:06:15 +00:00
itojun
f4e8883ccd
use a bit more standard (sys/device.h) prototype for {dp8390,ne2000}_detach().
2000-02-02 11:41:56 +00:00
enami
60e57afedd
- Check also DVF_ACTIVE bit in dp8390_intr.
...
- Delete ifmedia instances on detach.
2000-02-02 10:50:56 +00:00
itojun
17f5887294
implement if_detach code for ne/pcmcia.
...
XXX still incomplete, ne_pcmcia_detach() commented out for safery - please test
2000-02-02 10:00:06 +00:00
enami
bb03434a5f
Support Planex Communications Inc, FNW-3600-T.
1999-09-27 23:19:12 +00:00
thorpej
90b9deda72
When padding short packets on transmit, don't include the CRC length
...
in the computation. kern/8194.
1999-08-25 22:41:42 +00:00
abs
b02dbae17e
In xxx_mediachange(), if there is no callback to the front-end, just
...
return 0 instead of EINVAL. In this case, there will only be one media
type, and the upper-level if_media code will ensure that the user is
setting to that type.
This matches changes Jason made a while back to sys/dev/ic/lance.c
1999-06-23 04:17:10 +00:00
thorpej
f98d358a1f
Rework layer 2 protocol input routines. Instead of calling e.g. ether_input()
...
directly, call the function pointer (*if_input)(ifp, m). The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary. Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
1999-05-18 23:52:51 +00:00
thorpej
ad22c1dd58
Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them
...
ourselves.
1999-03-25 23:16:37 +00:00
explorer
3ebb419571
Update to slightly altered rnd_attach_source() api
1999-02-28 17:08:05 +00:00
thorpej
69a4436f8b
Avoid initializing the interface in the SIOCSIFFLAGS if ! UP and ! RUNNING.
1999-02-17 03:40:59 +00:00
thorpej
6eedee5c9d
Add entropy gathering.
1999-02-07 01:54:50 +00:00
mycroft
a6717054a4
Slight simplification to previous.
1998-12-12 16:31:34 +00:00
bad
fe3ce4e89a
Simplify the code dealing with the mbuf chain in dp8390_get().
1998-12-11 18:03:55 +00:00
bad
ba8bdebedd
Change a comment to reflect reality.
1998-12-11 16:01:16 +00:00
thorpej
1d0f24882d
Now that the *_activate() functions don't do things which are attachment
...
specific, move them into the chipset drivers.
1998-11-18 18:34:52 +00:00
thorpej
dd6750820c
Expose the "enable" and "disable" functions so that the front-ends can
...
access them.
1998-11-17 20:25:00 +00:00
mycroft
8146c925da
If we get a TX interrupt with no packets buffered, ignore it. This can occur
...
if the chip is reset while transmitting.
XXX
This occurs at boot time because the SIOCADDMULTI always resets the interface
when adding the `all hosts groups' -- usually while the ARP packet is being
transmitted. All drivers should be fixed to not reset the interface when
changing the multicast filter, if possible.
1998-11-12 13:18:26 +00:00
jonathan
011f2bda08
defopt NS, NSIP.
1998-07-05 06:49:00 +00:00
jonathan
3751946b97
defopt INET, NETATALK.
1998-07-05 00:51:04 +00:00
thorpej
cdec42b6a0
Fudge the start of the data pointer of the first mbuf in the chain when
...
reading a packet, ensuring that the data after the Ethernet header will
be aligned. Part of PR #4595 , from Andreas Johansson <ajo@wopr.campus.luth.se>
1998-01-27 23:26:21 +00:00
thorpej
e7044069f6
Fix a think'o in ifmedia initialization.
1997-11-03 00:19:41 +00:00
scottr
c35524f0a1
Fix a serious problem in dp8390_write_mbuf(), noticed by Jason Thorpe:
...
after we've written out the contents of the mbuf, increment the transmit
buffer offset by m->m_len.
1997-11-02 06:18:27 +00:00
thorpej
18636a8934
Add ifmedia support via callbacks to the front-end.
1997-11-02 00:23:54 +00:00
thorpej
b1ba3c5488
Pulldown from marc-pcmcia branch: minor tweaks to make this a completely
...
bus-independent driver, and garbage collect a few unnecessary things
from the softc.
1997-10-15 16:54:39 +00:00
explorer
66f8a19d70
back out previous change (committed in error)
1997-10-15 06:08:27 +00:00
explorer
f9370ddc7a
Add and/or update rnd_*() hooks
1997-10-15 05:55:13 +00:00
scottr
27f30774af
Conditionalize DEBUG printf on dp8390_debug. Pointed out by Jonathan
...
Stone.
1997-08-24 15:22:28 +00:00
scottr
cd3abdf098
Fix typo in last change.
1997-04-30 19:16:23 +00:00
scottr
c0d7fd03ae
Remove the use16bit softc field, replacing the functionality with dcr_reg.
...
This allows the front end to override the default DCR (byte-wide DMA,
x86 byte order, 8-byte FIFO) with different transfer size, byte order, DMA
parameters, and FIFO threshhold. If the loopback select bit is not set for
normal operation, the default is used instead.
Inspired by thoughts from Bernd Ernesti.
1997-04-30 18:09:14 +00:00
scottr
ad24724cbc
Machine-independent driver for DP8390/WD83C690-based Ethernet controller.
...
Derived from the ISA if_ed driver and the mac68k if_ae driver.
1997-04-29 04:32:07 +00:00