Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
57,605 Commits 606 Branches 0 Tags 3.1 GiB
bf997953d8
Commit Graph

128 Commits

Author SHA1 Message Date
mrg
5f534fca77 allow changing partition info from inside the interactive handler. 1999-11-26 06:03:09 +00:00
shin
7a8dbc6aa3 Fix typo. ('_i386__' -> '__i386__') 
Pointed by D'Arcy J.M. Cain, thanks.
 1999-10-12 00:36:17 +00:00
shin
39a8a0436e add hpcmips support (MBR) 1999-10-11 05:28:04 +00:00
ross
10078c4c8b don't unbalance { } pairs with #ifdefs or ctags(1) gets confused 1999-09-17 18:30:33 +00:00
abs
b755b885d5 Accept 'Y' for label disk as well as 'y' 1999-09-05 07:27:55 +00:00
bouyer
21521cffe4 Sync with sys/disklabel.h 1999-08-13 10:23:39 +00:00
kleink
03f1e83295 Try $TMPDIR before resorting to _PATH_TMP. 1999-07-21 17:56:34 +00:00
is
a895e91016 Make BSDLFS a EXT2FS-like filesystem, that is, dont print or parse the cpg 
field.
According to disklabel.h, its LFS semantics are "segment shift" (log2(segment
size)), but in the code it is used nowhere, and there are even plans to
allow non-poweroftwo segment sizes, so it won't ever work.
While at this, simplify the disktab-like output routine... here, currently,
BSDFFS, BSDLFS, EX2FS and ADOS do the same, so don't duplicate the code.
 1999-06-04 19:02:34 +00:00
is
37cb96a063 Print bsize and fsize in disktab-format output also for LFS and ADOS. 1999-06-03 21:15:49 +00:00
is
85270790c6 Print/parse block size, fragment size and cpg for FS_BSDLFS and FS_ADOS. 
(cpg has different semantics for LFS and ADOS, but is in use.)
XXX The disktab reading/disktab format output writing needs still to be done.
 1999-06-03 20:59:04 +00:00
cgd
50f0c49606 On NetBSD/alpha, go out of the way to read the boot area's contents if -r 
is specified, so that the boot blocks aren't clobbered when writing labels.
 1999-06-03 01:58:51 +00:00
cgd
a54ad4c40d kill some bogus comments about -r: it _does not_ cause the boot area to 
be clobbered.  since 4.4-Lite(?) disklabel.c has gone to extra effort
to avoid clobbering the boot area when using -r, but the 4.4-Lite manual
pages were apparently not updated to note that!
 1999-06-03 01:49:58 +00:00
christos
563aff8153 Add a 'chain' command in interactive mode that allows you to vary the 
size of the partitions, while the starting point gets adjusted automagically.
This chaining works for partitions that are not 'unused'.
 1999-05-03 09:45:01 +00:00
abs
e8dacca7c3 STRICT_ALIGNMENT only applies to the start of partitions, not length. 1999-04-30 04:46:50 +00:00
wrstuden
e312a3c208 Fix disklabel -t to work with disks that don't end on a cylinder. Before it 
wasn't adding a "su" entry, so when the disktab was read, the sectors per
unit was initialized to "nc"*"sc" which was wrong.

Fixes PR/7446 reported by Matthias Buelow <mkb@altair.mayn.de>.
 1999-04-29 19:12:07 +00:00
abs
2969961420 Allow partitions to extend to the end of the disk, even when 
STRICT_CYLINDER_ALIGNMENT defined. This allows existing valid disklabels
to work (including those generated by sysinst).
 1999-04-26 02:05:46 +00:00
kleink
e524714ca8 Update for sparc64. 1999-04-09 16:01:34 +00:00
kleink
de8c37eadc Update a pasto-ed comment. 1999-04-09 16:00:17 +00:00
bouyer
3cf54e49e9 If checklabel() failed, the label has not been written, so exit(1). 1999-04-09 10:06:18 +00:00
cgd
9164307eaf instead of coding an alpha boot block checksum routine here, use 
the macro now provided by disklabel.h
 1999-04-05 02:50:52 +00:00
mycroft
f6590b22cd Clean up SYNOPSIS formatting. 1999-03-07 11:02:05 +00:00
thorpej
fe8e643590 Use <sys/disklabel_mbr.h> 1999-01-27 22:04:51 +00:00
pk
832bb22922 Enable non-cylinder-aligned partition warning on sparc[64] & sun3. 
See also PR#6853.
 1999-01-21 11:58:00 +00:00
abs
593d6c65b9 Add '-f disktab' option to disklabel, via lib/6623 from 
Greg A. Woods <woods@most.weird.com>. (Very) slightly tweaked disklabel.8
 1999-01-19 06:24:08 +00:00
christos
7b57bf6d78 Adjust for DKTYPENAME changes. 1998-11-12 16:19:47 +00:00
perry
bfd526219d bzero->memset, bcopy->memcpy, bcmp->memcmp 1998-08-10 02:57:23 +00:00
drochner
1767a286ec -fix some lint warnings 
-fix overflow conditions (PR bin/5534, Zdenek Salvet <salvet@ics.muni.cz>)
 (+ one more: can VAX SMD drives be >4G?)
-fix output of "*" at odd end cylinder number (not odd size)
-break some lines >80 cols
 1998-08-04 11:52:52 +00:00
mycroft
5582b71d91 Shift column headers into the right position. 1998-07-27 17:19:58 +00:00
mycroft
48ba78aafd const poisoning. 1998-07-26 12:00:43 +00:00
mark
e7424be3c9 Fix from Chris Demetriou to modify the way in which arm32 filecore 
checksums are calculated paying attention to the fact that the way
the checksum works a sectors filled with a single byte value will
always checksum correctly.
 1998-06-07 20:33:22 +00:00
fair
3d7afc6d03 fix bad .Xr references 1998-04-29 09:49:10 +00:00
fair
c46ab392dc Principally, change foo(N) to .Xr foo N 
Also, do some other mdoc tagging.
 1998-04-28 04:07:04 +00:00
fair
01a274e0ea Clarify the documentation of the "-B" option, inspired by PR#5262. 
Contrary to the PR, the "-B" option does work, but not on all platforms.
 1998-04-27 21:03:08 +00:00
cgd
4cc8220755 when reading the MBR, seek to DOSBBSECTOR * DEV_BSIZE rather than just 
DOSBBSECTOR.  DOSBBSECTOR is 0 so it doesn't really matter, but the former
is what was really intended.
 1998-03-26 01:37:49 +00:00
cgd
55060d037f in makebootarea() (if NUMBOOT is nonzero), before reading the contents 
of the old boot area so that 'disklabel -r -w' won't clobber anything,
be sure to seek to the offset of the boot area (like readlabel() does).
Otherwise, if the machine has code which looks up machine-dependent label
bits, the offset read from will be incorrect, and disklabel will end up
secretly replacing the boot area with other data (which probably doesn't
look like a boot block).  The only port this currently affects is
NetBSD/arm32, because it's the only one of the three ports that use
NUMBOOT > 0 that has MD label grovelling code.
 1998-03-26 01:35:17 +00:00
cgd
d9199d66b6 factor out some more common bits into 'confirm', and make it a bit more 
bullet-proof.  also, make the arm32 #ifdefs a bit more consistent with
the i386 #ifdefs (without actually changing the behaviour of the code).
 1998-03-25 00:03:19 +00:00
cgd
9b9f17c131 use warnx when warning about an old BSD partition ID (i386 MBR code), 
since err/warn seem to be used consistently throughout the code, rather
than fprintf.
 1998-03-24 23:47:28 +00:00
cgd
eae9f47f62 KNF arm32-specific label-grovelling code. Also, clean up error messages 
(errx instead of err, kill bogus newlines, make error messages look more
"normal").
 1998-03-24 23:45:31 +00:00
drochner
699af7acdd Handle new MBR partition ID on i386. Put all code which decides about 
usability of an entry to one place, use same algorithm as kernel (ie,
check signature).
 1998-03-02 16:26:47 +00:00
perry
3fe138c146 RCS Id Police. 1998-01-09 08:03:16 +00:00
enami
db1f766937 Add missing -C flag in SYNOPSIS 1998-01-01 04:51:54 +00:00
enami
2db041522a Fix typo; the flag for interactive disklabel creation is not -e but -i. 
Also, make the description of -C flag into separate paragraph.
 1998-01-01 04:47:05 +00:00
enami
94f6d2b411 Fix usage; -i and -C flags are alway effective regardless of NUMBOOT. 1998-01-01 04:38:43 +00:00
pk
b8e8eb0e1f On the sparc, do not write to the raw disk at all if `-r' is on. 1997-10-19 20:45:42 +00:00
fair
b58a4f15c4 additional sun3/sparc warning about the "-r" option. 1997-10-18 23:46:44 +00:00
mark
1d23b0901e Define NUMBOOT=1 for the arm32 port. 1997-10-18 07:28:47 +00:00
mark
db54fc7a59 Added support for filecore partitions on arm32 platforms. 1997-10-17 21:29:36 +00:00
fair
d5adc82d1e add a warning about sun3 and sparc systems requiring partitions in integer cylinders or the boot ROMs get upset, per PR#3267. Is that it? 1997-10-14 06:30:13 +00:00
bouyer
dd53470e10 The number of fs types is FSMAXTYPES not DKMAXTYPES. 
Correct read of formatted file (used with -e or -R) so that fstype with
spaces will work. Also enlarge the fstype field by 2 chars so that
"Linux Ext2" will not be truncated.
 1997-10-13 09:53:26 +00:00
enami
fc8191fee4 - Use .Nm "" instead of .Nm disklabel in SYNOPSIS. 
- Do a trick to remove whitespace before close paren from generated output.
- Delete space at the end of line.
 1997-10-11 02:28:17 +00:00