188122248a
I've confirmed that Samsung MagicLAN SWL-2000N (PRISM-II) works
...
with WEP enabled.
2000-07-26 07:28:56 +00:00
cc8e6675e2
add Samsung MagicLAN SWL-2000N
2000-07-26 07:24:15 +00:00
fa8ff381d8
Add code to allow the PCI com serial ports to be used as the system
...
console. This is not enabled by default, and is turned on with
options PUCCN. Done by castor@netbsd.org .
2000-07-25 23:18:42 +00:00
969b4bc568
Define the todr(9) interface.
2000-07-25 22:38:14 +00:00
4ba0c6b55c
New time-of-day clock chip drivers. These implement the todr(9) interface.
2000-07-25 22:33:02 +00:00
27d41a1de3
Map txrate for prism2, where each bit is apparently assigned to the
...
corresponding rate; 1Mbps, 2Mbps, 5.5Mbps, 11Mbps.
2000-07-25 12:04:29 +00:00
5463f7b316
Improve the model identification and match. Addresses PR-10485.
2000-07-24 21:50:10 +00:00
b023fdd2b7
Regen.
2000-07-24 21:47:40 +00:00
0f37cacaf1
Add entries for all Xircom ethernet models.
2000-07-24 21:45:00 +00:00
10afc4e0a8
create a funcion, siop_busreset(), to reset the scsibus.
...
Reset the scsi bus at attach time, to be sure all devices start in narrow/async
mode.
Defer sync/wide negotiation until after whe have a valid
xs->sc_link->device_softc, so that we can honnor the NOSYNC/NOWIDE quirks.
2000-07-24 15:15:00 +00:00
197f977187
Pass the level and vector to vme_intr_map() in the correct order.
2000-07-24 15:00:41 +00:00
74cf7af4a9
Increase polled command timeout to 2s.
2000-07-24 12:28:31 +00:00
f9f72ecf9a
Purge C++-style comments.
2000-07-24 04:28:51 +00:00
a119131555
Be a little more explicit and careful about setting links in TDs and QHs.
2000-07-23 19:43:37 +00:00
5f7778cd1e
* Add entries for older Yamaha YMF chips (724, 740) plus the
...
newer steppings (740C, 724F) which use the same microcode as the
DS-1S/DS-1E.
Regen.
2000-07-23 00:18:24 +00:00
2169753fc5
* Add entries for older Yamaha YMF chips (724, 740) plus the
...
newer steppings (740C, 724F) which use the same microcode as the
DS-1S/DS-1E
2000-07-23 00:14:15 +00:00
19bd1749ad
Add short device descriptions in comment lines.
2000-07-22 21:25:52 +00:00
8be010f00d
- Big endianness cleanup:
...
a) use stream methods when transferring data via the MEMPORT into/out of
the chips buffer memory
b) use htole16/le16toh when interpreting 16bit values in the chips memory
Both where NOPs on i386 machines, which is why this worked before on the
test machine(s), but would break when on a big-endian machine.
2000-07-21 13:54:38 +00:00
afa5b645c2
add support for SIOCS80211NWKEY and SIOCG80211NWKEY.
2000-07-21 04:48:55 +00:00
c9355a957c
Add the pccard controller for a Toshiba Portege drive. No vendor ID, no
...
product ID, and in this temporary loan, no bleeding power supply so it
can only probe the controller and not the drive. Still, its something.
2000-07-20 23:20:01 +00:00
a1b8e79bb1
Take advantage of generic soft interrupts, if available.
2000-07-20 20:44:50 +00:00
b60bcd873d
Regen.
2000-07-20 14:47:35 +00:00
d3b42c18e4
Add what is apparently ESS's old vendor ID and corresponding product ID for
...
the Maestro 1.
2000-07-20 14:46:51 +00:00
6e88d58524
Make it compile when PCIIDE_AMD756_ENABLEDMA is defined. From kern/10555
...
by MURATA Shuuichirou.
2000-07-20 12:19:41 +00:00
83f94dc417
Regen.
2000-07-20 07:11:28 +00:00
4af0fbdb1a
Add PMAG-JA framebuffer.
2000-07-20 06:38:39 +00:00
0d5d0bd93a
don't define LIST_FOREACH, it's in sys/queue.h now.
2000-07-20 03:47:56 +00:00
c47c527343
add some more CTIO flags
2000-07-19 22:19:23 +00:00
0615788781
zero result queue entry when done if debugging.
...
don't do an isp_notify_ack if we're not at run state.
2000-07-19 22:19:00 +00:00
93379fb341
fix mislabelled error case
2000-07-19 22:18:02 +00:00
f9e6c9cf42
Fixx off-by-one error in handlereset().
2000-07-19 16:07:00 +00:00
554019cd4b
More printf format munging for off_t: when printing as %lld, cast to long long.
2000-07-19 13:44:24 +00:00
00cafd0569
Add MIDI support. From Tatoku Ogaito.
2000-07-19 09:58:45 +00:00
0ab524f389
moved the check priviledge for SIOCS80211NWID from each driver to ifioctl().
...
it also fixes the problem that non-priviledged user can change nwid
for wi and ray drivers.
2000-07-19 06:00:39 +00:00
7d1b0e5b39
Use device_lookup() and ditch TAILQ sillyness.
2000-07-18 15:27:44 +00:00
47f692248f
add WEP support also for PRISM2 cards.
...
Corega works fine with WEP, but farallon doesn't work well with WEP for now..
2000-07-18 15:01:55 +00:00
905b4e497f
Add support for Corega Wireless LAN PCC-11, and Farallon SkyLINE 11Mb.
...
Note that Corega card works at 3.3V only, then it requires cardbus code
for now.
2000-07-18 14:53:26 +00:00
4a2a3bf091
Add Farallon SkyLINE 11mb card as Intersil Prism2
...
vendor:product of the card is Lucent:WaveLAN, and CIS string shows
"INTERSIL" "HFA384x/IEEE"...
2000-07-18 14:48:10 +00:00
c41ca10d33
add "#define PCI_INTERRUPT_PIN_MAX 0x04"
2000-07-18 10:59:04 +00:00
693ff4c94d
PAGE_SIZE -> IOASIC_DMA_BLOCKSIZE in one last place. From Izumi Tsutsui.
2000-07-18 06:14:05 +00:00
b91d520dc9
Back out previous. It is no longer needed, as both the Alpha
...
and DECstation IOASIC drivers clear the appropriate interrupts
in the dispatch routine.
2000-07-18 06:12:33 +00:00
5446d3c92e
Don't make assumptions of the actual value of PCI_PMCSR_STATE_D0.
...
Problem noted by John Hawkinson.
2000-07-17 18:12:00 +00:00
cfae3184d8
Don't clobber bits from 2 to 31 when trying to change the power state.
...
Problem noted by John Hawkinson.
2000-07-17 17:53:44 +00:00
5e275d7012
Clear the DMA pointer reload interrupt bits in the IOASIC_INTR
...
register to prevent interrups from looping on the Alpha.
From Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>.
2000-07-17 17:43:16 +00:00
3aacf9101a
Regen.
2000-07-17 13:07:21 +00:00
82b491eecc
Some more products (from FreeBSD).
2000-07-17 13:06:54 +00:00
8746b7c870
- Write the registers 7930 registers properly on the Alpha (it's
...
different than on the DECstation).
- Use IOASIC_DMA_BLOCKSIZE instead of PAGE_SIZE.
Should make this work on the Alpha. From discussion with
Izumi Tsutsui, Gregory McGarry, and Chris Demetriou, and
much reading of EK-D3SYS-PM.
2000-07-17 04:37:27 +00:00
887bebaa71
Define IOASIC_DMA_BLOCKSIZE (4096 bytes).
2000-07-17 02:18:17 +00:00
8623daff6d
G/c some unused (and incorrect, for our usage) definitions.
2000-07-17 02:17:13 +00:00
95f72dd4aa
Use the IOASIC_DMA_ADDR() macro now that it is fixed.
2000-07-17 01:29:02 +00:00
cd6fa19644
Make sure to get the upper 5 bits of the page address mixed in
...
in IOASIC_DMA_ADDR(), as the le_ioasic attachment does. Noted
by Gregory McGarry.
2000-07-17 01:28:16 +00:00
114bb7f9d9
If card is in power state D3 put it into power state D0 so that it will
...
at least work after the next reboot.
2000-07-16 20:18:48 +00:00
859057e6b3
Fix uninitialized variable (reg) in fxp_pci_confreg_restore();
...
this could result in garbage being written to the PCI status register,
which is unlikely to have had a serious effect. This was with us from
an #if 0 added in rev 1.6.
2000-07-15 21:36:19 +00:00
9feae259a4
Avoid printing duplicate colon when card is waked up.
2000-07-15 20:57:24 +00:00
cfe61a3025
Un-__P'ify kernel prototypes.
2000-07-15 19:59:27 +00:00
54ccff0437
define "80x24" screen types for better vt100 compatibility
2000-07-15 18:47:54 +00:00
20305c6623
Fix a typo in the `device_lookup()' changes.
2000-07-15 18:12:42 +00:00
61c607b9fe
Improve kernel message when card is in power state D3. Instead of...
...
epic0 at pci0 dev 11 function 0 epic0: unable to wake up from ...
... print this:
epic0 at pci0 dev 11 function 0: unable to wake up from power state D3
2000-07-15 10:32:36 +00:00
498310f5be
Check if card was put into sleep mode using PCI/ACPI power management
...
and try to restart it. This patch based on hints by Jason Thorpe.
2000-07-14 22:00:32 +00:00
b141a6bfe8
Merge-o.
2000-07-14 21:09:45 +00:00
dc4b749234
Fix the status reporting for copybacks. Thanks to Hubert Feyrer for
...
reporting the problem.
2000-07-14 15:26:29 +00:00
d8205b6db1
Do a dummy read after writing through the memory access pipeline, to flush
...
it, before starting the command to install the multicast list.
(We did it right for writing data packets, but failed here.)
Without this, the last multicast address installed won't be made active.
2000-07-14 10:50:50 +00:00
ceafcbd834
apply Kenji Aoyama <aoyama@nk.mcu.or.jp>'s patch
...
on port-hpcmips-ja@jp.netbsd.org Mon, 10 Jul 2000 21:21:47 +0900
FIX:
Can't read CIS tuple chain:some TDK CF Flash memory card.
2000-07-14 08:02:12 +00:00
c675def443
Update comment.
2000-07-12 23:14:09 +00:00
1a82fc879b
Regen.
2000-07-12 22:59:54 +00:00
16a4fd2bff
Add DEC DE422 Ethernet.
2000-07-12 22:59:23 +00:00
b2a5b02fc9
Fix a couple of LP64 problems (long -> int32_t).
2000-07-12 21:15:33 +00:00
6c4d97da13
Indicate WEP capability to association request when WEP is enabled.
...
Without this fix, some (IEEE802.11 conformant) APs will send data to this
station without using WEP.
2000-07-11 12:54:00 +00:00
4f051180a0
- Use PMAD-BA name for device match logic. It's not a real TURBOchannel
...
device and the id string is not found in option ROM string, but
ULTRIX/OSF1 call it so anyway.
- Squash IOASIC DMA buffer allocation into device attach() sequence.
2000-07-11 04:10:25 +00:00
b71bddab49
Regen.
2000-07-10 16:32:07 +00:00
5a5452c95d
Add ICP Vortex RAID controllers.
2000-07-10 16:14:02 +00:00
b99e56173c
do not allow non-priviledged user to change nwid via ifconfig.
2000-07-10 14:36:17 +00:00
0de5b6e260
these don't need <uvm/uvm_extern.h> at all, actually.
2000-07-10 13:54:54 +00:00
c2ed037f55
move associated/synced/no-recent-beacons messages to IFF_DEBUG.
2000-07-10 12:32:53 +00:00
469c88cc11
Clarify that the RX5C47X requires writes to the PCI_LEGACY to
...
disable and not PCI_BCR_INTR; this is what rev 1.9 did under
the label of "Maintenance."
2000-07-09 22:06:02 +00:00
e6e9cc5c41
Move legacy pcic-mode disabling code from pccbb_chipinit() to
...
pccbbattach(). This is necessary as pccbb_chipinit() is deferred, and
may not run until after the pcic is already attached.
Now pcics are properly disabled on Sony VAIO, f'rinstance.
2000-07-09 21:58:30 +00:00
406e0f779f
Add a `device class' interrupt level argument (from machine/intr.h)
...
to bus_interrupt_establish().
It's currently only used in sparc64/dev/psycho.c to assign a CPU interrupt
level to devices in PCI slots.
2000-07-09 20:57:41 +00:00
d621cc4cb0
Add missing newlines in some messages.
...
Set Vpp the same as Vcc by default. We need to do more with voltage sense.
2000-07-09 01:55:18 +00:00
bd8f07c394
Recognize the i82559ER.
2000-07-09 00:46:26 +00:00
5cdb782283
Regen.
2000-07-09 00:45:56 +00:00
9d0e35cc63
Add ID for i82559ER.
2000-07-09 00:45:14 +00:00
dcf6e7b09e
When receiving an rx interrupt on a closed or unconfigured port, read
...
the data out of the board anyway so it won't re-interrupt anyway.
Fix tested by C Kane <ckane@best.com>
2000-07-08 18:36:02 +00:00
ed9ce99d8c
printf format paranoia
2000-07-08 17:12:08 +00:00
6421cc8af8
regen
2000-07-08 04:39:50 +00:00
d74c0a2e3e
add microSPARC IIep PCI controller
2000-07-08 04:38:55 +00:00
0d97100854
Use vme_dmamap_create().
...
Also, this device lives in VME_D16 data space.
2000-07-07 21:12:21 +00:00
67f1f77b78
Use vme_dmamap_create().
2000-07-07 21:11:08 +00:00
2646cf1612
Use the CMD PCI0648/9 IRQ ACK code for the 0646 too, makes the 0646 works
...
in native mode.
2000-07-07 13:54:25 +00:00
58a60a43f2
Gah. Bad port from FreeBSD code (thanks Robert Elz) for setting
...
up default timeout for watchdogging commands.
2000-07-07 03:14:53 +00:00
f420228afb
Define splaudio as splbio and IPL_AUDIO as IPL_BIO only if IPL_AUDIO
...
is not defined. Previously tested for specific system architectures (i386,
etc.) rather than just looking for IPL_AUDIO.
2000-07-07 01:11:12 +00:00
8cc5c2c8f1
Rename NODESIZE to BI_NODESIZE.
2000-07-06 17:47:02 +00:00
c0f8f713bf
Initial support for the XMI bus on VAX, MIPS and Alpha systems.
...
Not completely finished yet.
2000-07-06 17:45:52 +00:00
a4d6bdac79
do not show wep keys to non-root users.
2000-07-06 17:22:25 +00:00
c8793c3d7e
Change type `kbd_t' from `u_int_16_t' to `u_int32_t'.
...
This eliminates bogus casts from `int *' to `u_int_16_t*'.
2000-07-06 16:29:49 +00:00
e2aaf9ef7f
Work around a bug in AMD756 rev D2, from patches provided by David Sainty:
...
disable multiword DMA for these chips. multiword DMA can be forced with
options PCIIDE_AMD756_ENABLEDMA on rev D2 chips, but use at your own risk !
While I'm there remove a duplicate allocation of sc_wdcdev.nchannels in HPT
code.
2000-07-06 15:08:11 +00:00
555fde1163
Fix reversed test in umass_activate(). Probably fixes PR 10520.
2000-07-06 07:11:18 +00:00
d28fe378bc
Use device_lookup().
2000-07-06 02:02:48 +00:00
b47890a934
Reserve top nibble of status for use by the HBA. It's up to the
...
HBA to set or clear it.
2000-07-06 01:56:23 +00:00
cb450cc444
Use device_lookup().
2000-07-06 01:47:34 +00:00
7ed7b1b9fd
Per advice from thorpej, reinstated some of Erik's changes.
2000-07-06 01:17:38 +00:00
5297dab6a8
Use device_lookup() *more*.
2000-07-06 00:48:53 +00:00
cfaba33937
Use device_lookup().
2000-07-06 00:43:04 +00:00
cde72a2c2b
Garbage-collect __BDEVSW_DUMP_OLD_TYPE.
2000-07-05 23:31:12 +00:00
f78b367775
Roll core version. Get rid of dogactive (no longer used). Add in some
...
volatile flags (isp_mboxbsy- keeps a bitmask of expected output mailbox
registers) and storage for them (isp_mboxtmp). Get rid of macroized
LUN widths. This is determined at run time.
2000-07-05 22:28:08 +00:00
7358822ab5
Fix incorrect uint8_t vs. u_int8_t usage. Add in offset macros for outgoing
...
mailbox regs and a INT_PENDING_MASK macro.
2000-07-05 22:26:53 +00:00
b520c663d0
add MBOX_GET_RESOURCE_COUNT command
2000-07-05 22:25:53 +00:00
93778c19b8
pick up FreeBSD changes
2000-07-05 22:25:34 +00:00
3626695b49
Roll platform minor. We are now always supporting ISP2100_FABRIC. Add
...
in new MBOX_WAIT_COMPLETE/MBOX_NOTIFY_COMPLETE macros (ready for SMPizing).
Define STRNCAT inline for our usage.
Stealing a bit of the xs_status flags to maintain command state that
is pertinent for the hBA- should really reserve them for private usage
in scsipiconf.h.
2000-07-05 22:25:06 +00:00
a743834a38
Redo watchdogs to handle cases of false death of commands- time
...
each command now.. Get rid of SCCLUn stuff. Use an isp_done routine
to handle cases of watchdog and isp_done racing to completion.
2000-07-05 22:23:05 +00:00
a7560ced04
Add back in a (corrected) isp_prtstst function.
2000-07-05 22:21:44 +00:00
e946846577
Back out previous commit- the author is incorrect. There is no 'narrow'
...
Qlogic controller driven by this chipset. If they don't want the verbosity,
don't compile a DIAGNOSTIC kernel.
Major amount of mailbox command rewrites- hopefully should fix some of the
outstanding PRs.
Change header to note that this is no longer maintained at NASA/Ames.
2000-07-05 22:20:51 +00:00
c466b99a9a
Use new isp_handle_index function. Redo how firmware is checked for
...
and loaded. Remember to enable interrupts after isp_reset but before
isp_attach. Return CMD_EAGAIN on request queue overflow so we can retry
the command when there's more queue space.
2000-07-05 22:12:23 +00:00
855b5ef9b0
Use new isp_handle_index inline function. Change order in whch
...
some things are done. Remember to enable interrupts after calling
isp_reset but before isp_attach.
2000-07-05 22:10:56 +00:00
f73a4d37e2
split firmware into smaller files
2000-07-05 22:09:08 +00:00
3c5afc2677
Back out previous, it has to be done in a different way.
2000-07-05 19:05:31 +00:00
838676ce64
Apply patch from David Sainty <David.Sainty@optimation.co.nz>:
...
Some AMD controllers have a bug which can look up the machine when using DMA, so
disable DMA for some revisions (info provided by AMD).
"options PCIIDE_AMD756_ENABLEDMA" can be used to force DMA on these chips.
2000-07-05 18:58:41 +00:00
e93c7e8dd2
typo. From: jdolecek
2000-07-05 18:47:51 +00:00
5f1c4bb519
use memory mapped address, instead of i/o memory access, for control
...
registers. rationale:
- Netwave cards choke if we map i/o memory to >= 0x400
- even though, CIS tuple talks nothing about it
- it is not possible to specify range in pcmcia_io_map
- it would be very bad to do a try-and-error bus_space allocation for
i/o memory regions < 0x400
- we can have exactly the same functionality with memory mapped access
this should correct PR 10139.
the memory mapped access idea was from WIDE wildboar/bsdi cnw code.
2000-07-05 18:42:19 +00:00
fa436f165c
HPT: use pciide_channels[i] not pciide_channels[0]. My HPT370 now probes
...
both channels (but still doesn't work properly; I suspect I got a broken one).
2000-07-05 16:11:35 +00:00
30c1d4ba1c
- Withdraw ZS_IOASIC_DMA conditional which has never been useful.
...
- Sanitize ZS register access.
2000-07-05 07:50:57 +00:00
728e424e54
Repopulate 4 files, zs_ioasic.c and zs_ioasicvar.h from arch/alpha/tc,
...
zskbd.c and zsms.c from dev/dec/, respectively. No functionality
change this time.
2000-07-05 02:48:50 +00:00
807a12c8cd
change the argument of SIOCS80211NWID and SIOCG80211NWID ioctls from
...
u_int8_t array to struct ieee80211_nwid to prepend length field.
The length field is necessary because IEEE 802.11 spec doesn't prohibit
even '\0' for SSID.
Though the name and the value of SIOC... macro is unchanged, this change
breaks binary compatibility. The only affected userland program on the
tree is ifconfig(8).
As Jason suggested on tech-net, it is better than live with problems
since there are no releases for this ioctls yet.
2000-07-05 02:35:53 +00:00
af32c63489
remove unneeded include "opt_awi.h"
2000-07-05 02:27:25 +00:00
88a0f6ee93
Match with promise ultra100/ata contoller. I haven't actually test this
...
contoller with ultra100 drive, but it works at least with ultra66 or more
older drive
2000-07-04 16:34:33 +00:00
fa92d1c635
Regen.
2000-07-04 16:30:42 +00:00
a710a5e35e
Add device ID of promise ultra100/ata controller.
2000-07-04 16:27:32 +00:00
904f3cd34f
Add wlan.
2000-07-04 15:57:02 +00:00
e7adcbdb13
enet dma: claim interrupt as appropriate.
2000-07-04 14:58:36 +00:00
7411709050
Support WEP functions for awi driver.
2000-07-04 14:47:58 +00:00
793eb28211
Support WEP functions for awi driver.
...
arc4 implementation by Kalle Kaukonen has been added.
define "wlan" in files.
XXX: only awi depends on wlan for now.
Allow authentication for adhoc (IBSS) mode.
Disable adhoc mode without bssid (mediaopt adhoc,flag0) for FH radio.
FH cannot work without synchronization by beacons.
Align IP header for ethernet encapsulation (IFF_FLAG0) mode.
Print available access points for IFF_DEBUG.
2000-07-04 14:27:56 +00:00
87803a8f14
amigappc: siop -> asiop
2000-07-04 14:18:06 +00:00
0e23cbd506
Remove unneeded include <sys/kernel.h> from FreeBSD by <phk@freebsd.org>
2000-07-04 14:16:21 +00:00
93d627808a
Update some entries:
...
- add amigappc devices
- add sgimips devices
- add cmpci, cy82c693, cz, fwbus, fwohci, sysmon, viaenv, viapm and xmi
- add necpb for arc
- add pcons for sparc64
- add xsii for pmax
- ncr for vax is renamed to si
- si for sparc is now MI
XXX siop for amigappc should be renamed to asiop?
2000-07-04 14:01:31 +00:00
8f0fb77674
MAke sure bass&treble start in their mid position.
2000-07-04 10:02:45 +00:00
a02e08bf4f
Remove work-around for Lite-On PNIC in tlp_filter_setup() that is
...
apparently no longer necessary (probably due to other fixes that
have happened in the filter setup path) and is in fact harmful.
Based on a patch from Krister Walfridsson, who claims this makes
his newer NetGear FA-310TX work (although, my older NetGear FA-310TX
still does not, but fails in an entirely different way).
2000-07-04 04:18:17 +00:00
33d6ee7269
sync with sys/dev/ic/adwlib.h change (s/ADV_TICKLE/ADW_TICKLE/)
...
not sure if it is right. comments?
2000-07-04 04:17:03 +00:00
49014bf59f
Restructure the PHY entry points to use a structure of entry points
...
instead of discrete function pointers, and extend this to include
a "reset" entry point. Make sure any PHY-specific reset routine is
always used, and provide one for the LXT-970 which disables MII
interrupts (as is done for a few other PHYs we have drivers for).
2000-07-04 03:28:59 +00:00
87eac96162
Make sure to settle tcdsreg.h and tcdsvar.h in /usr/include/dev/tc/.
2000-07-04 02:31:21 +00:00
1de4ec68b4
Repopulate TCDS dual channel SCSI adapter to MI dev/tc, squashing
...
internals for better layering between TCDS DMA ASIC and ASC SCSI
controller.
2000-07-04 02:22:08 +00:00
d0827b0ed7
sparc/dev/sireg.h -> dev/vme/sireg.h
2000-07-04 01:29:14 +00:00
0c92b006c6
Fix negative timeout symptoms caused by integer multiply overflow,
...
which is revealed with larger HZ systems like NetBSD/pmax (256Hz)
and NetBSD/alpha (1024Hz) as reported by PR#8645. Polled tape
drive access is done with maximum 6 hour timeout which ended up
with negative time and then confused SCSI bus severely.
2000-07-04 01:10:18 +00:00
93f987a210
The `si' driver has been transformed into an MI VME frontend.
2000-07-03 23:30:33 +00:00
fa845b7795
Fix a off-by-one error in sc_freeze_dev[].
...
Thanks to kwesterback@home.com
2000-07-03 18:14:18 +00:00
cc05a49fb0
Regen.
2000-07-03 06:05:44 +00:00
72cbe1224d
Devices found in NEC Versa Note VX
2000-07-03 06:01:17 +00:00
feb8219648
Regen.
2000-07-03 01:07:25 +00:00
3c9acfbb29
Add some Alcor products.
2000-07-03 01:07:04 +00:00
06f1d399e2
Take just the low-order 32 bits of cpu_counter() here.
2000-07-02 21:04:33 +00:00
0d28ab1838
Common part of APM (advanced power management) support for Hpcmips.
2000-07-02 09:48:12 +00:00
1ce8331ad9
nuke some final __BROKEN_INDIRECT_CONFIG bits that weren't caught by
...
unifdef last time. (bloody things just won't stay dead!)
2000-07-02 06:25:46 +00:00
235a799246
re-add README that got lost in 2.12-to-2.14 merge.
2000-07-01 01:59:54 +00:00
c01704a9db
remove unnecessary #ifdef __NetBSD__'s in #ifdef __FreeBSD__;
...
move one #include <vm/vm.h> into #ifndef __NetBSD__
2000-07-01 01:53:37 +00:00
d307475c33
resolve conflicts.
2000-07-01 01:38:58 +00:00
5457abf9cb
Import release 2.14 of the bktr driver. Changes: mostly integration
...
of NetBSD changes; support for new Hauppauge tuner types.
2000-07-01 01:30:43 +00:00
5f9b72f44c
match 3Com 3CRWE737A (AirConnect)
2000-06-30 16:40:31 +00:00
c8edea398b
regen
2000-06-30 16:33:38 +00:00
35c8e4d91e
add 3Com 3CRWE737A (AirConnect)
2000-06-30 16:33:17 +00:00
e211fdee79
Use my proper name in copyrights.
2000-06-30 13:36:47 +00:00
a9d80391d0
Move the include of <vm/vm.h> into the ifndef __NetBSD__ part.
2000-06-30 08:12:10 +00:00
7b0ccbb669
need uvm_extern.h for a function definition
2000-06-30 00:01:22 +00:00
8c46f6d687
#include "opt_ahc.h"
2000-06-29 23:12:19 +00:00
dd3e309684
Fix some missed vm/vm.h -> uvm/uvm_extern.h conversions.
2000-06-29 19:27:55 +00:00
756aa08443
Since the RFA is allocated in a normal mbuf, as opposed to DMA-safe
...
memory that is explicitly mapped in a DMA-coherent manner, we must
make sure to PREREAD sync the RFA after noticing a clear "complete"
bit. Without this, the clear bit will linger in the cache, and the
CPU will not notice when the chip updates the bit via DMA later.
From Izumi Tsutsui on port-arm32@netbsd.org .
2000-06-29 16:53:48 +00:00
72d99f2b0c
Add all arm26 devices with drivers
2000-06-29 12:49:18 +00:00
ce2b2827e5
Nuke a printf that *I* added at least as early as Nov, 1998, and which is
...
as bogus now as it was then.
2000-06-29 00:22:27 +00:00
0b82c9610f
Don't check for a BAR address past PCI_MAPREG_END; some devices
...
have BARs way out in left field.
2000-06-28 17:32:48 +00:00
314f1e97c5
remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h>
2000-06-28 17:12:48 +00:00
b5e0d5686e
remove include of <vm/vm.h>
2000-06-28 17:09:41 +00:00
a14baa8257
remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h>
2000-06-28 17:05:20 +00:00
261538ecac
remove include of <vm/vm.h>
2000-06-28 16:39:25 +00:00
666116dd21
<vm/vm.h> -> <uvm/uvm_extern.h>
2000-06-28 16:38:37 +00:00
7e81221f5a
remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h>
2000-06-28 16:27:51 +00:00
7c15053eed
remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h>
2000-06-28 16:08:42 +00:00
e24d6ebc19
Fix a couple of brain-o's in error cases, and use PCATCH for
...
the sysmon mutex wait.
2000-06-28 06:51:17 +00:00
d28770775b
Make it compile with AUDIO_DEBUG after the mmap API change.
2000-06-27 21:25:02 +00:00
f324eef2d2
remove include of <vm/vm.h>
2000-06-27 17:55:38 +00:00
bddc013764
Add special IRQ handler for CMD PCI0648 and PCI0649 taken from the
...
experimental version of Manuel Bouyer's driver.
2000-06-27 05:57:05 +00:00
bfc5613f54
Revert some of the previous mmap() changes that were in "#ifdef FreeBSD"
...
parts of this file.
2000-06-27 05:14:31 +00:00
e185413725
remove redudant <vm/pmap.h> includes. <vm/pmap.h> -> <uvm/uvm_pmap.h>
2000-06-27 04:18:48 +00:00
4cc6a62a33
Remove debugging code that wasn't supposed to be in the commit of version 1.55
2000-06-26 19:38:14 +00:00
f4e210fb2c
remove redundant vm includes
2000-06-26 15:26:35 +00:00
4c698e84f6
<vm/vm_param.h> -> <uvm/uvm_param.h>
2000-06-26 14:58:58 +00:00
89d0a3e519
remove redundant vm includes.
2000-06-26 14:38:50 +00:00
2f159a1bac
remove/move more mach vm header files:
...
<vm/pglist.h> -> <uvm/uvm_pglist.h>
<vm/vm_inherit.h> -> <uvm/uvm_inherit.h>
<vm/vm_kern.h> -> into <uvm/uvm_extern.h>
<vm/vm_object.h> -> nothing
<vm/vm_pager.h> -> into <uvm/uvm_pager.h>
also includes a bunch of <vm/vm_page.h> include removals (due to redudancy
with <vm/vm.h>), and a scattering of other similar headers.
2000-06-26 14:20:25 +00:00
8a0d96e59e
Add support for the CMD PCI0648 and PCI0649 IDE controllers.
...
Thanks to Matthias Scheler for testing.
2000-06-26 10:07:52 +00:00
2e861ca3ce
Correct 80 pin handling for promise Ultra/66: when the bit is set
...
we *don't* have a Ultra/66 cable.
2000-06-26 09:55:26 +00:00
889c658b5b
Change the kernel mmap interface so that the offset to map is an
...
"off_t" and the return value is a "paddr_t" to allow mappings
at offsets past 2^31 bytes. Somewhat inspired by FreeBSD, which
only changed the offset to a "vm_offset_t".
Includes updates for the i386, pc532 and sh3 mmmmap from Jason Thorpe.
2000-06-26 04:55:19 +00:00
10eccb55ca
cmpci requires mulaw dependency.
2000-06-25 23:34:27 +00:00
fda426af2c
Defopt TLP_MATCH_*
2000-06-25 18:49:22 +00:00
3628d5523b
printf argument was in wrong position. Noted by Roger Hardiman
...
<roger@cs.strath.ac.uk>. (This code was ifdef'd out by default.)
2000-06-25 17:47:39 +00:00
c543a66253
remove some redundant <vm/vm_xxx.h> includes
2000-06-25 13:26:19 +00:00
44330020aa
Make PCI HME work.
2000-06-25 01:10:04 +00:00
79dffec702
Get PCI HME working.
2000-06-25 01:05:16 +00:00
c7477bfbe5
Fix spelling and formatting.
2000-06-25 00:23:13 +00:00
1e343745fc
regen
2000-06-24 12:16:55 +00:00
103a704990
add Intel 82801BA devices
2000-06-24 12:16:21 +00:00
6a6fdc8681
Kill SPLUSBCHECK -- it's not portable, and quite annoying on some
...
platforms which otherwise function just fine.
2000-06-24 04:12:53 +00:00
f82e306928
Add a clearing-house pseudo-device for system monitoring devices
...
such as the LM78 and VT82C686A (and eventually ACPI). Multiple
sensor devices can be hooked registered with `sysmon', and eventually
sysmon will also handle hardware (and software) watchdog timers.
Convert the `lm' and `viaenv' drivers to the new interface.
2000-06-24 00:37:19 +00:00
a4c83bd5bf
s/sc->sc_ethercom.ec_if./ifp->/ where appropriate and formerly forgotten,
...
for better readability.
2000-06-23 14:07:03 +00:00
139e08bead
Only "complain" about successful multicast setup if IFF_DEBUG was set.
2000-06-23 13:54:50 +00:00
onoe