3553879fc2
Use my proper name.
2000-06-13 13:36:42 +00:00
31c0cc5f46
Regen.
2000-06-12 22:33:41 +00:00
72d31d8d37
Add AMD 79c978 PCnet-PCI Home.
2000-06-12 22:33:06 +00:00
26bbb4f200
Regen.
2000-06-12 21:25:20 +00:00
034590578d
Shorter description for the HPT366
2000-06-12 21:25:01 +00:00
b21bc1b5b6
- add a pciide_irqack() callback, which clears the IDE DMA status bit once
...
the IRQ has been cleared on the drive.
- use pa->pa_class instead of re-reading PCI_CLASS_REG when possible
- Add support for Highpoint HPT366 and HPT370 (370 untested), based
on patches from Roger Brooks <R.S.Brooks@liverpool.ac.uk> posted on
current-users Mach, 15. Given how Highpoint docs have been wrong for the
366, the 370 is likely to not work.
Thanks to Chris Cappuccio <chris@dqc.org> for sending me the Highpoint
docs, and to Total Archive (http://www.totalarchive.com/ ) for sending
me hardware.
2000-06-12 21:20:51 +00:00
8642ac97bf
Regen.
2000-06-12 21:12:59 +00:00
1970e14b93
Add HPT366/370 device ID.
...
XXX Is 'TRIONES' the rigth vendor name ?
2000-06-12 21:12:30 +00:00
eb21ed4746
Adapt to going back to decemal device numbering.
2000-06-09 18:00:45 +00:00
8d04cd3f90
Rather than assinging 64 tty's per pci card, assign tty's as found.
...
Cyclades says driver should work with up to 128 tty's per pci card
even though they only support 64 now. Also matches FreeBSD behavior.
Print located tty's using new tty naming scheme - ttyCZ?? where ?? are
two hex letters.
Make firmware load on macppc - one le32toh() was missing.
2000-06-09 16:53:23 +00:00
8ac7bdd00c
changes for NEC RISCstation 2250 of arc port.
2000-06-09 04:48:12 +00:00
77625cf7ec
long long constant needs "LL" suffix.
2000-06-09 04:45:53 +00:00
b8f4f2be87
Regen.
2000-06-09 00:21:08 +00:00
def28a5cd2
Add some PCI devices found in the IOpener (commited from the IOpener itself :).
2000-06-09 00:20:18 +00:00
6dd21e55a9
Make attach messages consistent with PCI drivers. Make function pointer
...
usage consistent with other drivers.
2000-06-08 22:15:52 +00:00
b6a821f042
Change IPL when bridge's interrupt handler calls child device's
...
interrupt handler (This solution is not very good).
2000-06-08 10:28:28 +00:00
295ed77595
The OPTi controller supports a 32-bit dataport after all.
...
Also detect when the chip is sitting on a 25MHz PCIbus and
set the timing registers accordingly.
2000-06-07 20:42:52 +00:00
887d4555cd
Regen.
2000-06-07 19:53:17 +00:00
4837200a8c
Add vendor/device ID for 3ware Escalade IDE RAID controller.
2000-06-07 19:52:07 +00:00
a67130a218
regen.
2000-06-07 09:55:22 +00:00
09b843b7f6
fix a couple of the sun entries.
2000-06-07 09:52:16 +00:00
dca97557cd
Add CB_BCR_RESET_ENABLE in bridge control resister's bit definition.
2000-06-07 09:02:46 +00:00
b15bbb90f9
Add missing break;
2000-06-07 04:31:49 +00:00
13ed0863f8
Regen.
2000-06-07 01:58:17 +00:00
e2c1012576
Add Trident 9397DVD.
2000-06-07 01:57:30 +00:00
c85d6d7ca3
Improve the Cypress name a little.
2000-06-06 22:56:06 +00:00
a452638f06
In pciide_mapreg_dma(), check to see what type the BAR is before
...
mapping the registers, as suggested by a comment in that function.
2000-06-06 22:47:22 +00:00
ba5df2479b
Shorten names of VIA controllers to fit in 80 columns with versions.
2000-06-06 17:48:12 +00:00
c40fa3c4d4
Actually program the DMA mode of the drives into the Cypress
...
controller. Fixes a long-standing problem where IDE DMA wasn't
working on the AlphaPC 164SX.
2000-06-06 17:34:22 +00:00
05d7f969b9
Regen.
2000-06-06 07:55:50 +00:00
aed5858e8b
Add the product ID for the ESS Maestro 3 modem function as well.
2000-06-06 07:55:17 +00:00
21d9669e4f
Common routines for read/writing Cypress 82c693 control registers. Needed
...
by `pciide' and the Alpha `sio' (PCI-ISA bridge) driver.
2000-06-06 03:07:39 +00:00
8c4d1bf1f9
Adapt MI ncr53c9x changes.
2000-06-05 15:08:00 +00:00
ca3d9c7fa7
Regen.
2000-06-05 11:34:07 +00:00
428a7ca4e3
Add the ESS Maestro 3 product ID as well.
2000-06-05 11:33:35 +00:00
9b40e3731a
Regen.
2000-06-05 11:31:15 +00:00
be40495bb0
ESSTECH:
...
* add what's allegedly the Maestro 1's product ID.
* align product names with data sheets.
2000-06-05 11:29:28 +00:00
745e3fef63
pciiide -> pciide
2000-06-04 22:22:12 +00:00
f44619d89d
KNF some lines.
2000-06-02 18:34:05 +00:00
87a5ae384c
Update URLs.
2000-06-01 09:58:19 +00:00
f1b4af5ba1
Make this compile too.
2000-05-30 08:36:27 +00:00
e78793c612
Beginning of a IEEE 1394 framework. An attachment for PCI OHCI controllers
...
and bus-independent module that just begins to print things out. No real
code behind it. THIS IS A WORK IN PROGRESS. The *reg.h are woefully
incomplete.
2000-05-30 06:56:13 +00:00
c7326acd04
Add the PCI attachment for IEEE 1394 OHCI controllers. Files to follow later.
2000-05-30 00:53:14 +00:00
fd1991294f
Regen
2000-05-30 00:21:07 +00:00
adaaa34784
Add the TI 1394 controllers. Makes all the 1394 controller descriptions
...
similar.
2000-05-30 00:20:41 +00:00
8cde93a435
* Support (not so) new cards. (only Cyclom-8YsP+ is tested)
...
* Make compilable with CY_DEBUG.
2000-05-29 12:05:41 +00:00
c461529353
regen
2000-05-28 10:25:25 +00:00
f8091908b5
-correct description for 3c905b-FX (100 Mb only)
...
-add Neomagic 256ZX
2000-05-28 10:24:57 +00:00
3a4393ff92
While DM9102A boards tend to have ISV-format SROMs (likely to describe
...
the HomePNA PHY typically connected to the external MII interface),
DM9102 implementations (often found on motherboards) do not. Handle
this.
2000-05-27 19:42:06 +00:00
46807640c7
Add support for the OPTi 82c621 PCIIDE controller and its derivatives.
...
I only have a Compaq laptop on which to test this, so reports of
success/failure in other systems would be welcomed.
2000-05-27 17:18:41 +00:00
1d2a3e79a9
Regen.
2000-05-27 17:12:36 +00:00
713621eb0e
Add entries for a couple of OPTi PCI-IDE controllers.
2000-05-27 17:11:37 +00:00
00369993f9
Whitespace police.
2000-05-27 16:38:02 +00:00
ed0572ca92
Regen.
2000-05-27 11:40:04 +00:00
eaef48d317
Add a few devices.
2000-05-27 11:38:31 +00:00
8a3725612d
Add support for the Davicom DM9102 and DM9102A 10/100 Ethernet chips.
...
Partially based on diffs submitted by Matthew Orgass <darkstar@pgh.net>
and IWAMOTO Toshihiro <iwamoto@sat.t.u-tokyo.ac.jp>.
2000-05-26 16:38:13 +00:00
3d7bdc4c94
Fix a bug introduced in last commit which caused a painc due to
...
re-enqueueing an already free ccb.
Prepare the background to have a unique initialization function for
all of the supported host adapters.
Rename a lot of #define in a more sane way.
Move Carriers initialization and defines in adwmcode.{c,h}
Don't lose Carrier nodes in case of a BUS/Chip reset explicitly invoked
after a DMA failure.
XXX - DMA failure still arise when AdvanSys U[2]W host adapters are used
in conjunction with Intel 82443BX Host Bridge/Controller (rev. 0x03).
!?!Have to understand why!?!
2000-05-26 15:13:43 +00:00
bf05730540
Regen.
2000-05-26 05:07:02 +00:00
5bd1e75033
Add NEC 1394 OHCI chips
2000-05-26 05:06:27 +00:00
b063b2ec36
Separate the sheduler from the main script, allocate another DMA-safe
...
memory page for the sheduler. Put the main script in the on-chip RAM when
available.
Avoid a null-pointer dereference when DSA is invalid.
2000-05-25 10:10:54 +00:00
4f92d2cd54
Update from Bill Studenmund <wrstuden@zembu.com>:
...
- Note that the FreeBSD driver distributed by Cyclades served as
documentation on how the board works.
- Use the wait-until-pending-I/O-completes-before-loading-parameters
command in czttyparam().
- Pass BREAKs up to the tty later properly.
- Garbage-collect some debugging code.
2000-05-24 22:26:35 +00:00
8f7304f9b7
Typo in previous.
2000-05-23 16:47:44 +00:00
5c9920bbb6
Update from Bill Studenmund <wrstuden@zembu.com>:
...
Correctly send and receive BREAKs -- still needs to do something
intelligent with them. Some additional debugging goo.
2000-05-23 01:02:21 +00:00
c2b6147132
Replaced overlooked BROOKTREE_SYSTEM_DEFAULT with BKTR_SYSTEM_DEFAULT,
...
as noted by Roger Hardiman.
2000-05-22 01:00:29 +00:00
56cb02c358
Use bktr_softc.bktr_dev.dv_xname instead of "bktr0" when printf'ing as
...
requested by Klaus Klein in kern/10166.
Also add device instance name to all printf's that didn't have it.
2000-05-21 15:43:56 +00:00
c3e3a945cc
Add a missing bktr%d: in one of the attach messages.
...
(When is this code going to be KNFed?)
2000-05-20 16:16:15 +00:00
f2973e2fb8
- Change RL_* -> RTK_*
...
- Free bus_dma resources if attach fails
- Add detach and power management code
Patch from Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp> in kern/10156.
2000-05-19 13:42:29 +00:00
3e403cdb65
In tiocm_to_cztty(), use SET() instead of CLR() in the
...
TIOCMBIS case. "Oops!"
2000-05-19 06:01:14 +00:00
59164fe0fc
Fix an inverted test.
2000-05-18 17:55:17 +00:00
6095f60587
regen
2000-05-18 13:04:27 +00:00
309b0ed70d
fix typo in last commit
2000-05-18 13:03:31 +00:00
4d3e8e6976
regen
2000-05-18 08:03:22 +00:00
81fd58c65b
Add the device ID for the IBM MPIC-II.
2000-05-18 08:02:19 +00:00
5274a6162f
Add a device driver for the Cyclades-Z series of intelligent multi-port
...
serial boards. Written by Jason R. Thorpe and Bill Studenmund.
2000-05-17 17:58:09 +00:00
07ea678d4d
Register definitions and preliminary API definition for the PLX 9060
...
family of PCI bus controllers.
2000-05-17 17:47:00 +00:00
c4042e45a5
Sync my copyrigth notice.
2000-05-15 08:46:00 +00:00
e557084177
Update for siop split.
2000-05-15 08:27:24 +00:00
a1c4db6c37
- split siop_pci in attachements vs helper functions, for comming esiop
...
- add a reset callback to enable PCI-specific features. This improve bandwith
by a factor of 2 on my alpha with a 875 !
- sync copyrigth notice
2000-05-15 07:53:17 +00:00
e5ae7c287a
Symbol namespace cleanup: rl_ -> rtk_
2000-05-15 01:55:12 +00:00
a4b298224a
Use <dev/ic/ac97reg.h>
2000-05-15 01:35:29 +00:00
1838aef29c
ac97.h -> ac97var.h
2000-05-15 01:27:44 +00:00
8513bb93ed
Regen.
2000-05-14 14:58:14 +00:00
b84dfa7c45
Add SGI IOC3.
2000-05-14 14:56:53 +00:00
e0292df01c
sc_ih (interrupt cookie) is not pci-specific data
...
and needs to remain in fxp_softc rather than fxp_pci_softc;
otherwise we break cardbus.
2000-05-12 18:46:33 +00:00
cd82969dfc
Print the revision info from the PCI configuration header. From
...
Dave Sainty, kern/10025.
2000-05-12 17:52:07 +00:00
c8de5ae180
Treat the 3c980C-TXM like the 3c980 Server Adapter. From Paul J. Lavoie,
...
kern/10037.
2000-05-12 17:48:47 +00:00
032c5f01de
Regen.
2000-05-12 17:47:05 +00:00
0a712d4707
Add product ID for 3Com 3c980C-TXM 10/100 Ethernet. From Paul J. Lavoie,
...
kern/10037.
2000-05-12 17:46:47 +00:00
288883fca7
Apply indent(1).
2000-05-12 16:42:41 +00:00
6474f16852
Use ether_crc32_le().
2000-05-12 16:41:59 +00:00
421c001447
Move struct fxp_pci_softc declaration to if_fxp_pci.c removing an
...
unnecessary header file (if_fxp_pcivar.h); oh, how quickly the nascent
inodes are subject to infant mortality.
2000-05-12 13:46:31 +00:00
cd552bf956
Fix bugs seen on Sony Vaios.
...
Address kern/9370, kern/9548, kern/9571, and kern/9573.
Save and restore critical PCI configuration registers because they are
sometimes bashed.
Add a powerhook to restore said PCI registers after APM events.
The fxp now works across a warm boot from windows (vaio).
The fxp now works across an apm suspend/resume or hibernate/resume cycle.
2000-05-12 03:37:40 +00:00
6622f20fc1
Move pci-specific data to fxp_pci_softc from fxp_pci_softc.
...
Add some more pci-specific data to fxp_pci_softc.
2000-05-12 03:36:18 +00:00
8d671b6292
Define some PCI power management CSR constants.
2000-05-12 03:35:34 +00:00
5786c811d5
Support 64-bit PCI memory mapping registers, as sometimes are used
...
on the Symbios 53c896 controller. Also, prefer memory space over
I/O space.
2000-05-10 17:22:46 +00:00
90f7e687dc
These are no longer used.
2000-05-10 17:09:44 +00:00
d56c0ff801
Support Adaptec U2W cards with a 64-bit PCI memory range (such cards
...
are available with Power Macintosh G3 and G4 systems).
2000-05-10 17:07:52 +00:00
5939e70ca3
Add support for mapping 64-bit PCI memory space. If the region
...
is mapped in a way that is inaccessible by a 32-bit bus_addr_t, then
print a message to that effect and return failure.
Original patches by Bill Studenmund, with a few small changes by me.
2000-05-10 16:58:42 +00:00
7a6f003756
Add a comment describing the previous change.
2000-05-10 08:39:58 +00:00
7d4bae615d
Move if_rl_pci.c:1.7 to if_rtk_pci.c.
2000-05-10 00:19:55 +00:00
05e928a241
Ops, abort if we can't map the registers ! Pointed out by Matthias Drochner.
2000-05-09 17:05:52 +00:00
2648a72bb2
Minor changes to PCI configuration
2000-05-08 17:11:54 +00:00
6d3ce966ce
VIA VT82C686A hardware monitor
2000-05-08 16:40:42 +00:00
05f0b17555
Make pci_get_capability() work correctly on both header type 0 and type 2
...
devices; both have different Capability List Pointer registers.
2000-05-08 10:52:38 +00:00
085ec82073
Add a register offset for the Capability List Pointer in header type 2.
...
XXX Ideally the PCI-Cardbus Bridge header should be restructured to just
XXX present standard register definitions, making it ~safe to be included.
2000-05-08 10:45:52 +00:00
de328af944
Fix a inverted logic botch introduced in rev. 1.35, typically causing
...
cb_chipset() to return the wrong chipset type.
2000-05-08 07:31:20 +00:00
8651580247
man page is written, remove it from TODO
2000-05-07 20:47:10 +00:00
8ee4c016eb
PCI product codes for Yamaha YMF744B (DS-1S) YMF754 (DS-1E) audio chips.
2000-05-07 17:00:06 +00:00
0d57ac396d
Product codes for Yamaha YMF744B (DS-1S) YMF754 (DS-1E) audio chips.
2000-05-07 16:56:34 +00:00
f7e2752025
Change one 0 for bootverbose to 1 if DEBUG is defined.
2000-05-07 14:59:23 +00:00
20ae91400c
Add a dummy bootverbose.
2000-05-07 14:49:11 +00:00
21942247f3
It is a bad idea to declare a static bootverbose variable here. Remove it.
2000-05-07 14:43:31 +00:00
4211fcfd7e
remove unnecessary output to console
2000-05-07 13:50:10 +00:00
7392f90215
multiple inclusion protection
2000-05-07 03:01:58 +00:00
3d3dc5c594
add one
2000-05-07 01:46:01 +00:00
2f7dba9ea1
compilation fix
2000-05-07 01:16:23 +00:00
4caea4817d
some glue for bktr-driver
2000-05-07 00:25:58 +00:00
5f8b869a3e
Some NetBSD specific changes; also TODO, and import script, based
...
on bind2netbsd by Bernd Ernesti
2000-05-07 00:24:33 +00:00
8b27ce1a70
Import of (finally busspaced) bktr-driver from FreeBSD (part 1).
...
This version is from the location specified in the README, modified
by bktr2netbsd, to be committed later.
2000-05-07 00:16:17 +00:00
5e209d22f7
Print the usual interrupt line.
2000-05-06 00:46:19 +00:00
5a5c88dc4e
`typedef void ifnet_ret_t;' isn't valid C -- use #define, instead. Also,
...
don't abuse the C preprocessor.
2000-05-03 21:08:02 +00:00
081e7cbdaf
`typedef void ifnet_ret_t;' isn't valid C -- use #define, instead.
2000-05-03 20:52:29 +00:00
3bb9a5f666
- do sync/wide negotiation
...
- use a circular queue for the start slots, so that order has better chances
to be preserved.
2000-05-02 19:03:02 +00:00
8ca78ff825
In siop_lookup_product(), actually check the PCI *vendor* ID as well as the
...
product ID.
Prevents false matches of other devices, such as the DEC 21050 ppb.
2000-05-02 03:59:35 +00:00
4e1e58e353
Change the way the codec is access to mimic how Linux&FreeBSD does it.
2000-05-01 17:15:41 +00:00
9498452c05
- Move some initialization into MI rl_attach() from each bus attachment.
...
- Use proper CARDBUS_* macro in if_rl_cardbus.c
- Use product ID read from PCI configuration space rather than from EEPROM
in if_rl_pci.c.
Patch sent from Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp> and
some cosmetic changes by me.
2000-05-01 15:08:50 +00:00
fec9706315
Remove unneeded #include "mpu.h"
2000-04-30 22:16:56 +00:00
aaa405eab7
Add driver for C-Media CMI8x38 Audio Chip. From Takuya SHIOZAKI <AoiMoe@imou.to>
2000-04-30 21:59:58 +00:00
1dbea6c0f9
Add new microcode for all of the supported boards.
...
Fix minor glitches.
Add preliminary support for ASB-3940U3W host adapters; it might work w/ autotermination on.
ASB-3940U3W support is not yet tested due to lack of board.
2000-04-30 18:52:14 +00:00
ff84aeb762
Add ASB-3940U3W host adapters (AdvanSys)
2000-04-30 18:46:18 +00:00
d2679acf60
Add ASB-3940U3W host adpeter (AdvanSys)
2000-04-30 18:34:53 +00:00
439b360ab9
Modify EEPROM read functions and handle also 9356 EEPROM.
...
Fixes kern/9861.
2000-04-30 12:00:40 +00:00
d2e2dce826
Regen.
2000-04-28 20:54:39 +00:00
0b9c397110
Add 2 more eap audio devices.
2000-04-28 20:54:10 +00:00
bbb8c56fcb
add PCI_MAPREG_PPB_END (PCI-PCI bridge) PCI_MAPREG_PCB_END (PCI-Cardbus bridge)
2000-04-28 17:12:45 +00:00
30c20f930f
Change my email address.
2000-04-27 15:26:44 +00:00
bf7a94ec2b
Fix copyrigth notice.
2000-04-27 14:06:57 +00:00
ef25b7769e
Regen.
2000-04-26 17:30:59 +00:00
0defe75e76
Add product ID for the PLX Technology 9060ES PCI bus controller. Note this
...
ID isn't normally seen, as just about every device with a PLX on it loads
a different ID from an EEPROM, but there's no harm in documenting it.
2000-04-26 17:30:35 +00:00
b4f524c223
- Allocate mbuf dynamically on Tx and use bus_dmamap_load_mbuf(9).
...
- Call bus_dmamap_sync(9) as appropriate.
- Leave only register declarations in rtl81x9reg.h and
split other stuff into rtl81x9var.h.
bus_dma(9) code mostly taken from thorpej's if_rtp.c.
2000-04-26 14:02:34 +00:00
6369b56c99
Fix two endian problems. rtk now works on macppc.
...
- Use le32toh() on reading rxstat from the Rx DMA buffer.
- rl_read_eeprom() should return EEPROM values in little endian
when caller requires byte-stream data.
bus_dma(9) fixes are still on-going.
XXX rtk on macppc seems to make tons of CRC errors...
XXX Does it work fine on i386 or others?
2000-04-25 14:16:46 +00:00
74beeca710
Move the size of the mapped bus_space region into the bus independent softc.
2000-04-25 09:20:54 +00:00
aae26d0d0c
Move a test if the MIDI is open outside a loop in the interrupt routine.
...
Some stylistic changes.
2000-04-24 17:55:24 +00:00
6f9392b42a
Merge changes of sys/pci/if_rl.c rev. 1.8->1.10. (from kern/9870)
...
Also remove unused pbase, vbase and PCI_CAP_PWRMGMT declarations.
2000-04-24 15:25:00 +00:00
5ea1af4bf4
Regen.
2000-04-22 18:07:19 +00:00
f468f877de
Add some CMedia audio devices. From T.SHIOZAKI <AoiMoe@imou.to>
2000-04-22 17:32:02 +00:00
19ada4a82a
Snapshot of work in progress: new driver for the NCR 53c8xx SCSI controller
...
(the name 'siop' is still being discussed, may change).
Only basic disconnect/reselect for now, no sync/wide negotiation.
Tested with 810A, 875 and 895 on i386 only.
The bus-independant part should also be able to handle the 53c720 and 53c770.
A new driver with enhanced script should appear for the 825/875/895 'soon'.
2000-04-21 17:56:58 +00:00
3e49436f9d
Replace rcons console code with rasops console code.
...
Console text should now be supported on all TGA cards;
8- and 32-bit TGA and 8-bit TGA2 have been tested.
Implement accelerated character drawing, scrolling, and clearing.
Stop clearing "odd" in VHCR; it's unnecessary and hurts performance.
Use bus_space_vaddr() instead of a local hack.
2000-04-20 05:25:20 +00:00
784977f319
Changes the name of RealTek driver. The new name is `rtk'. This used
...
to be called `rl' and it conflict with RL vax disks, canonical and
historical unix driver name.
This changes are minimal: it only changes the name of RealTek driver.
The filename of source code and a lot of the letter `rl' in source
files should be changed shortly.
2000-04-19 08:44:31 +00:00
5803932005
Regen
2000-04-19 07:52:33 +00:00
ad