1. size_t is 64 bits, so use a u_32_t for iplused
2. microtime() and friends expect a struct timeval,
passing the first of two unsigned longs will not cut it.
as necessary:
* Implement a new mbuf utility routine, m_copyup(), is is like
m_pullup(), except that it always prepends and copies, rather
than only doing so if the desired length is larger than m->m_len.
m_copyup() also allows an offset into the destination mbuf, which
allows space for packet headers, in the forwarding case.
* Add *_HDR_ALIGNED_P() macros for IP, IPv6, ICMP, and IGMP. These
macros expand to 1 if __NO_STRICT_ALIGNMENT is defined, so that
architectures which do not have strict alignment constraints don't
pay for the test or visit the new align-if-needed path.
* Use the new macros to check if a header needs to be aligned, or to
assert that it already is, as appropriate.
Note: This code is still somewhat experimental. However, the new
code path won't be visited if individual device drivers continue
to guarantee that packets are delivered to layer 3 already properly
aligned (which are rules that are already in use).
to enable 64-bit data transfers on 64-bit cards when plugged into
a 64-bit slot. Right know the Asante GigaNIX is listed in that
table.
Sigh, there is an EEPROM bit that can be used to detect 64-bit vs
32-bit cards. Unfortunately, at least 2 vendors of 32-bit cards
fail to clear the "DATA64_EN" bit in the EEPROM, which causes the
card to lose badly, because it still manages to detect that it's
plugged into a 64-bit PCI slot. Yay, stupid hardware vendors.
path: Instead of waiting for the if_snd queue to be drained before
giving ownership of the frist descriptor to the chip, do it after
sync'ing all the descriptors for a single packet.
* Get CFG_M64ADDR, CFG_T64ADDR, and CFG_DATA64_EN from the EEPROM.
Note, we still disable CFG_M64ADDR and CFG_T64ADDR later (XXX need
PCI bus capability flags for these).
* Print a message if we're in a 64-bit slot and 64-bit data is
disabled in the EEPROM. Make sure CFG_DATA64_EN is disabled if
we're not in a 64-bit slot.
sysconf(_SC_CLK_TCK) return hz will work.
In detail:
__times13() returns values scaled by hz.
times() returns values scaled by 100.
<sys/times.h> renames times() to __times13().
_SC_CLK_TCK has changed from 3 to 39.
sysconf(3) returns 100.
sysconf(39) returns hz.
CLK_TCK is defined as sysconf(39).
bjh21