Move interrupt routine to simply updating state flags and ack'ing interrupts
Move main processing into kthread
Change IPL level to IPL_BIO and try not to hold splbio very much if at all.
Add baseline support for attaching/detaching/updating fwnode's.
Start adding higher level API which isn't tied to if_fw/mbuf's
802.3 doens't specify ANAR or ANLPAR bits for GMII. Need to
use PHY-specific registers for this, for now, which means we
need specific drivers for the Gigabit-capable PHYs (I think the
most common is the BCM5400).
This is based on amiga's siop driver, but converted to use
bus_space(9) functions and modified to fit bus_dma(9) framework.
Currently tested on NetBSD/arc with jazzio 53c710 SCSI,
which really requires bus_dma(9) functions :-)
Sync transfers and disconnect/reconnect are also working.
TODO:
- Test under more heavy load
- Clean up osiop_checkintr() hander
- Reorganize command queue and sync negotiation handling more suitable
for thorpej-scsipi mid-layer
- Re-think defered interrupt handling for amiga
Both models tested and seem to be quite stable and fast.
Thanks to:
- Hans Hubner <hans@Huebner.org> for giving me the cards for testing
- Georg Klug of Syskonnect, who provided me with hw docs for these cards,
very promptly and willingly - I wish all vendors would be like this
- Alfred Arnold, Linux SKNET driver author, for giving me valuable Syskonnect
contact :)
reasonable transmit/receive buffer count.
This is needed for e.g. SKNET adapters, which use top 30 bytes of 16KB
memory to map registers and PROM and hence not all the memory is
available for buffers.
to 16 or 4 (depending on capabilities of adapter), as it was before
thorpej_scsipi integration
Waiting feedback to known whenever the problem with openings set to AHC_SCB_MAX
existed before.
- Add (missed)powerhook_disestablish() in ex_detach().
- Sync with below. Original commit log message:
Add new powerhook argument values, PWR_SOFTSUSPEND, PWR_SOFTSTANDBY and
PWR_SOFTRESUME. Apm calls powerhook with the values in normal interrupt
priority level while others are protected with splhigh().
This is a completely rewritten scsipi_xfer execution engine, and the
associated changes to HBA drivers. Overview of changes & features:
- All xfers are queued in the mid-layer, rather than doing so in an
ad-hoc fashion in individual adapter drivers.
- Adapter/channel resource management in the mid-layer, avoids even trying
to start running an xfer if the adapter/channel doesn't have the resources.
- Better communication between the mid-layer and the adapters.
- Asynchronous event notification mechanism from adapter to mid-layer and
peripherals.
- Better peripheral queue management: freeze/thaw, sorted requeueing during
recovery, etc.
- Clean separation of peripherals, adapters, and adapter channels (no more
scsipi_link).
- Kernel thread for each scsipi_channel makes error recovery much easier
(no more dealing with interrupt context when recovering from an error).
- Mid-layer support for tagged queueing: commands can have the tag type
set explicitly, tag IDs are allocated in the mid-layer (thus eliminating
the need to use buggy tag ID allocation schemes in many adapter drivers).
- support for QUEUE FULL and CHECK CONDITION status in mid-layer; the command
will be requeued, or a REQUEST SENSE will be sent as appropriate.
Just before the merge syssrc has been tagged with thorpej_scsipi_beforemerge
need to explicitly relatch the interrupt when firing it up again. So, in the
trigger routines, explicitly disable and reenable the interrupt to relatch it,
like we do in the interrupt routine.
Also clean up some broken loop overrun checks.
My ES1371 seems to be more reliable now, but I'm not going to pretend to fully
understand this chip.
to be cleared always in edmcadone(), otherwise if there is a write
via bounce buffer followed by read directly to buf, the read operation
would return trashed data (the buf data would get overwritten
by contents of bounce buffer in edmcadone()).
Reset b_resid as necessary when the i/o is done, too.
g/c some unneeded stuff, use lockmgr()-style locking in ed_[un]lock(),
better avoid some deadlocks
These changes make the driver quite a bit more stable. It's actually
reliable enough to be possible to newfs the drive and use it for
read/write filesystem now.
XXX Currently disabled by default because it has some problems on macppc.
XXX Maybe some more initialization is needed, but there is few information
XXX about the chips.
resulting in a blank screen when f.e. a setcursor ioctl was called
after the screenblanker had enabled the screen again ... the actual
switching on was then never performed at VSYNC.
A simple |= instead of = does the trick ... just leave the other bits
on please :)
Tested with NE/2 card provided to me by Hans Hubner <hans@Huebner.ORG>.
The Compex and Arco cards were not tested. According to Linux ne2 driver,
they should work same way as NE/2.
Disk & Controller only at the moment.
This driver still needs some touchup (error recovery is not quite
good, MCA DMA controller goo should be moved to driver independant
location), but is working enough to be usable for others. And I
want this under CVS control :)
Thanks to Scott Telford <st@epcc.ed.ac.uk> for providing me docs for
these devices (IBM DASD Storage Interface Specification for MCA rev. 2.2).
This is the way that e.g. HP recommends (but then some of their printers
have a bug that makes the input pipe useless anyway).
Also try reset both the 1.0 and 1.1 ways.
Currently it appears as a "com" port, which is less than useful, and
occasionally generates stray interrupts. "stty -f /dev/tty00 31250 raw"
does enable it to talk to a nearby MIDI device, though.
a happy code sweep (in the kernel!) and constified a random selection of
kernel objects. This changed the alignment of the previously-aligned-by-
accident seqprog array, and exposed a lurking bug. I can't decide if this
is good or bad.
