adf03cea81
Add copyright notice.
1999-02-16 15:20:51 +00:00
069050d92d
Bump mips3 CPU-mhz timing threshholds by 10% due to egcs wins.
...
XXX mips1 not recalibrated.
1999-02-16 10:10:51 +00:00
3cc1ae4ff2
Use VECTOR() and VECTOR_END() in mips1 locore code.
1999-02-16 08:35:35 +00:00
8dcc2f0651
Add support to boot from ide hard disks.
1999-02-16 07:25:43 +00:00
8d45c4eb84
Use promlib version correctly.
1999-02-16 07:22:17 +00:00
adc3e91e3a
Add VECTOR() and VECTOR_END() macros for declaring exception-vector
...
code. Fold in <xxx>End names used to copy exception code to vector
locations. Use in mips3 locore code.
1999-02-16 05:06:26 +00:00
e0a4cb2335
Add NetBSD RCS Id's
1999-02-16 01:08:16 +00:00
80a6d1c537
reboot(8) is now supported, by hitting the hard reset (RST) bit in the GCSR.
...
Figure out the amount of onboard RAM by looking at the MEMC040/MEMECC
configuration register. (Bank #0 only, for now).
1999-02-15 21:05:26 +00:00
83852d7633
regenerate
1999-02-15 19:34:13 +00:00
6139fd16f3
Install the `machine' link again; it went missing a while ago.
...
Add `-I.' to CPPFLAGS to use it.
1999-02-15 19:31:34 +00:00
41bc990eca
Create a RCS id in the generated configuration file
1999-02-15 19:16:41 +00:00
2a1ecde639
Transfer copyright to TNF.
1999-02-15 19:01:38 +00:00
d292580f3f
Use PROMLIB to streamline this code. This also provides the bulk of
...
Open Firmware boot code.
1999-02-15 18:59:36 +00:00
8460b71d8d
* Add promlib.c to common sources.
...
* Compile with prototype warnings turned on.
1999-02-15 18:52:12 +00:00
f379e1e9c0
Fix RCSid, pointed out by Hubert Feyrer.
1999-02-15 07:07:43 +00:00
56f2d188fc
RCS ID police
1999-02-15 04:54:34 +00:00
a6a228ce7f
RCS ID police
1999-02-15 04:38:06 +00:00
aa4a217d1c
RCS ID police
1999-02-15 04:36:33 +00:00
100778d54a
RCS ID police
1999-02-15 04:25:28 +00:00
dcd5f59c0a
RCS ID police
1999-02-15 04:14:54 +00:00
c95ea656d6
Elf bits.
1999-02-14 20:04:26 +00:00
a72d37c4fa
Merge support for mvme167 into main tree.
1999-02-14 17:54:27 +00:00
059697a999
Use PROMLIB's prom_setcontext().
1999-02-14 14:37:45 +00:00
3ee0ba2805
romcall() => prom_halt()
1999-02-14 14:37:15 +00:00
67df93822d
Add size arg to getpropstringA
1999-02-14 14:03:16 +00:00
8edcd03969
Use the PROMLIB interface.
1999-02-14 12:44:31 +00:00
9896803ae6
Fake a label only if it appears to be blank, and if so use RAW_PART
...
instead of 0.
1999-02-14 12:42:33 +00:00
4b9ee1f8ce
This file is superseded by promlib.c
1999-02-14 12:38:03 +00:00
4dc82c28b4
Exit: obp.c; Enter: promlib.c & openfirm.c
1999-02-14 12:36:50 +00:00
a8456f4e8a
Check OBP magic: if no match then assume an Openfirmware PROM.
1999-02-14 12:33:55 +00:00
1e5bf77774
Adjust to functionality and changes introduced with <machine/promlib.h>
1999-02-14 12:26:16 +00:00
a99ba2939c
Provide a uniform interface to most of the PROM functions.
...
Include an Openfirmware back-end (mostly copied from sparc64).
1999-02-14 12:23:03 +00:00
f651d280fa
Continue hacking on esp driver. Seems relatively stable in read only mode.
...
write operations appear to lose scsi interrupts and causes timeouts.
changes in this checkin include:
a nextdma bugfix causing a diagnostic check to erroneously trigger
Changed tail strategy to only use tail buffer for the minimal end slop
changed expected write dma overrun to 32 bytes.
turned on nextdma diagnostic check for dma end address since it
no longer gets triggerred by ethernet dma and helps debug scsi dma.
Added esp debugging printout and support.
1999-02-14 10:19:51 +00:00
6dc3d1eae8
Put back bsd.own.mk and added comment explaining why it must be included.
1999-02-14 02:56:19 +00:00
6e13c7d4b5
Avoid defining __extension__ if we don't need to. Breaks lint.
1999-02-13 20:35:02 +00:00
21485fd1d6
noise reduction.
1999-02-13 16:45:28 +00:00
f2da4dfc95
Support __syscall for COMPAT_AOUT properly.
1999-02-13 16:10:44 +00:00
997f74e47c
Continued work on esp scsi driver. Now can at least do enough i/o to create and mount
...
a filesystem, but is not stable enough yet for general use.
increased priority of ethernet interrupts, mostly useful to aid debugging
of scsi interrupts while using an nfs disk.
added additional debugging output in the next dma driver.
perform extranneous cache flushes/purges before dma reads/ after dma writes
to aid debugging of scsi dma.
1999-02-13 09:44:50 +00:00
dcab0210a0
convert from NOxxx= to MKxxx=no.
...
include <bsd.own.mk> if testing a MKxxx variable.
1999-02-13 02:54:17 +00:00
22a5cb007f
Fix printf format warnings on Alpha.
1999-02-13 02:41:40 +00:00
c372a9b915
Remove bsd.own.mk include
1999-02-12 23:48:46 +00:00
31101d57ec
Add missing backslash.
1999-02-12 18:13:12 +00:00
dbdaf91650
change the "mapchar" interface to return a "quality" or "match level"
...
arguments which allows to find approximations for characters which are
not present in a font
1999-02-12 11:25:23 +00:00
02d221f94a
Fix printf format problems on Alpha.
1999-02-12 06:25:13 +00:00
db631acd8a
Fix printf format problems on Alpha.
1999-02-12 06:07:52 +00:00
aea84d23cc
add a proto for print_dtbl
1999-02-12 05:58:27 +00:00
43542ba2e5
include dev/mii/files.mii
1999-02-12 05:57:21 +00:00
8a3ac60bb8
Change NOMAN to MKMAN.
1999-02-12 05:15:35 +00:00
3e90f302b6
Don't give exit() a parameter, as libstand version doesn't take one.
1999-02-12 05:14:22 +00:00
5194c207d0
Fix printf format problems on Alpha. (IRONIC?!)
1999-02-12 01:45:42 +00:00
tsubai