ba327d4301
make this compile again
...
(it isn't built by default, but anyway)
2008-04-01 19:20:43 +00:00
b5e4e50433
remove stale declarations
2008-04-01 19:19:33 +00:00
3189c49560
Fix previous: use the length of l->l_foo not kl->l_foo and add
...
two KASSERTs to check for max lenght limits before copying.
As suggested by rmind@.
2008-04-01 18:06:06 +00:00
03c6a6aa65
fill_lwp: when copying l_wmesg and l_name, use the size of the string
...
not of the variable.
Found and ok by rmind@.
2008-04-01 17:39:58 +00:00
18b1d12d0e
Also fix a memleak when the event is already in dictionary
...
and has been updated.
2008-04-01 17:01:34 +00:00
4b02b68c59
sme_event_register: fix a memory leaks in two error paths.
2008-04-01 16:48:18 +00:00
e3c537a961
Fix previous commit, this Guillemot model was supported already
...
by rum(4).
2008-04-01 15:26:11 +00:00
8530f5047d
Fix fallout from device_t/softc split to mpu(4):
...
always pass the mpu_softc to mpu_intr(). Found by Takeshi Nakayama.
2008-04-01 13:35:39 +00:00
5ee4eba88d
Introduce per-device locking/synchronization and maintain only a
...
global mutex for the linked list of devices and the global proplib
dictionary.
This has improved locking contention a lot when multiple devices with
multiple monitoring events are running:
New:
0.30 35 0.33 sme_global_mtx sysmonioctl_envsys+28b
0.10 10 0.11 00000000cd97feac sysmon_envsys_acquire+4c
0.08 6 0.09 00000000cd97feac sme_update_dictionary+24f
0.01 4 0.01 00000000cd97feac sme_events_worker+2f
0.01 10 0.01 00000000cd97fe2c sysmon_envsys_acquire+4c
0.00 1 0.00 00000000cd97fe2c sysmon_envsys_release+3b
28.38 94 9.16 sme_global_mtx sysmonioctl_envsys+28b
4.54 74 1.47 00000000cd97fe2c sysmon_envsys_acquire+4c
0.06 3 0.02 00000000cd97fe2c sysmon_envsys_release+3b
0.03 1 0.01 00000000cd97fe2c sme_events_worker+2f
1.40 19 0.45 00000000cd97bee4 sysmon_envsys_acquire+4c
Old:
4.25 313 4.74 sme_mtx <all>
3.12 185 3.49 sme_mtx sme_events_worker+21
1.12 128 1.25 sme_mtx sysmonioctl_envsys+29b
34.75 1423 59.52 sme_mtx <all>
22.08 477 37.82 sme_mtx sysmonioctl_envsys+29b
12.67 946 21.70 sme_mtx sme_events_worker+21
2008-04-01 12:25:30 +00:00
e9c68c5df0
Add timeout to busy loops waiting for ADB command completition.
...
Turns the hard hang in PR port-mac68k/37611 into a warning.
2008-04-01 12:02:52 +00:00
138df53bd3
If MPDEBUG and waiting for the CPU to start, dump cpu_trace[] as it changes.
2008-04-01 11:09:58 +00:00
520b46da7e
Use multiple kthreads to process config_interrupts tasks. Proposed on
...
tech-kern.
2008-04-01 10:37:42 +00:00
1ed6b6fc06
if genfb_pci can't map regs, don't panic() just return.
2008-04-01 01:11:55 +00:00
b2bbe181c6
Fix audio_volume_toggle. How did this ever work for me? Thinkpad T61
...
mutes audio automatically when the mute key is pressed.
2008-04-01 00:52:11 +00:00
2b82be6063
Note additions of Realtek ALC662-GR support to azalia(4) and the new
...
asus(4) hotkey driver.
2008-04-01 00:16:14 +00:00
745d331c98
Note addition of sysinst support for zaurus.
2008-04-01 00:03:54 +00:00
a839529a7e
Increase the Zaurus INSTALL memory disk size to match the size of the
...
ramdisk created by the distrib files.
2008-04-01 00:01:14 +00:00
a6421eb745
Add zaurus support to distrib, it's now possible to build a sysinst
...
enabled install kernel using the standard methods.
2008-03-31 23:59:06 +00:00
4d962d78f3
Add sysinst support for zaurus.
...
Still needs some work, eg raw partition should be c not d on arm
platforms.
2008-03-31 23:55:29 +00:00
e2d485abc4
Add GENERIC.HOSTUSB kernel for zaurus.
...
This allows a Zaurus to act as a USB host, rather than client device.
Tested on a C3000 with USB NIC. I've added most usb devices to the kernel
as I'd expect USB devices just work.
Eventually this will disappear once switching from host to device
controller mode is supported.
2008-03-31 23:40:44 +00:00
53030734c6
Add GPIO pins for USB cable type detection and glue for zusb devices for
...
config.
2008-03-31 23:35:39 +00:00
ed87ed8b00
Add zusb device for powering on the USB port. Also configure USB port 2
...
via the client USB on the pxa270, as it appears USB port 2 is the
externally routed port.
The linux driver was used as documentation for GPIO pins and port
settings.
Note that this only seems to work for one boot, a reboot loses for some
reason, perhaps something in the USB client area needs to be configured.
XXX: perhaps we should make zusb a device that attached/detaches the USB
USB host or client device depending on the plugged in cable.
2008-03-31 23:32:43 +00:00
1859a7ec67
Update pxa2x0 ohci support to match recent device_t/softc splitting on
...
ohci.
Also remove powerhooks (eventually it'll be pmf'd)
This is enough for host usb to work sometimes on a zaurus.
2008-03-31 23:18:49 +00:00
aaf18737ff
Split device_t/softc.
...
Use aprint.
2008-03-31 15:49:29 +00:00
bc77ebea72
Remove useless returns at the end of void functions.
2008-03-31 15:28:47 +00:00
0123953b4c
Add outputs.master.mute and inputs.dac.mute knobs for ALC662. XXX these
...
currently only control speaker mute, not headphone. Needs to be revisited.
2008-03-31 15:23:30 +00:00
8c1cc2fb3f
Enable asus(4)
2008-03-31 15:21:01 +00:00
73f476d471
Split softc/device_t for spc(4) and misc related cleanup.
2008-03-31 15:20:47 +00:00
149201cfa6
Enable asus(4)
2008-03-31 15:19:28 +00:00
4fab67daa7
Add ASUS ACPI hotkey driver, as found in the Eee PC.
2008-03-31 15:17:21 +00:00
648ad337d4
Register pmf handler.
2008-03-31 14:30:58 +00:00
d292c1dc4d
Revert unexpected DDB_ONPANIC change introduced in last revision.
2008-03-31 09:42:25 +00:00
10b824ffee
use aprint_error_dev(), for clarity
2008-03-31 09:37:37 +00:00
1ecc4e51fc
Update intree and current version of OpenSSH. (4.6 and 4.9/4.9p1)
2008-03-31 07:54:55 +00:00
87e42a468b
Convert from use of bcopy() to memcpy() so that this builds again.
2008-03-31 06:19:59 +00:00
50ea53d902
...and fix my fix to do the proper device_t split.
2008-03-31 03:19:20 +00:00
0e06ed5d6e
fix device_t split fallout.
2008-03-31 02:42:42 +00:00
30883326ec
Change USE_SKEY default to "no"; we have had USE_PAM=yes as the default
...
for a long time, and there's no point having custom S/Key support in the
applications given that pam_skey.so is now in /etc/pam.d/*
2008-03-31 02:42:27 +00:00
85df549da3
fix device_t split fallout.
2008-03-31 02:39:40 +00:00
14cd56faf0
Portable code should use RTLD_LAZY, not DL_LAZY.
2008-03-31 00:23:15 +00:00
c7bcf11189
Initial support for the Realtek ALC662-GR as found in the ASUS Eee PC.
2008-03-31 00:18:17 +00:00
98deadff04
If the name passed to Var_Exists contains '$' run it through Var_Subst.
2008-03-31 00:12:21 +00:00
e93a5674cc
Add a little const.
2008-03-30 22:28:41 +00:00
c82cfbf571
Use SYSTRAP macro, rather than inlining the swi instruction.
...
This makes sure the SWI will be in the NetBSD assigned range of swi
numbers.
2008-03-30 21:22:05 +00:00
e8ecc76830
will need darwin_types.h in the branch.
2008-03-30 20:59:59 +00:00
c2126f5e21
print size_t with %zu.
2008-03-30 20:58:08 +00:00
3b8eb423c6
actually update the 'battery present' sensor. Doh.
2008-03-30 18:19:53 +00:00
b996b42f44
free & unmap DMA memory and registers on detach()
...
Now removing and re-attaching a mediabay works again.
2008-03-30 18:16:25 +00:00
a78054eebc
don't splhigh() in the interrupt handler, instead spltty() in adb_poll()
2008-03-30 17:57:29 +00:00
527b0e5405
Convert from using bcopy() to memcpy(), so that this builds again.
2008-03-30 16:28:08 +00:00
drochner