augustss
fb4a4525a8
Be cautious about the blocksize returned by the hardware driver to
...
avoid division by 0.
1999-11-01 18:06:36 +00:00
kleink
9dfb5a91ec
Minor output formatting buglet.
1999-09-23 11:53:13 +00:00
augustss
a85a08c2fb
Add support for detaching audio devices.
1999-09-09 10:24:39 +00:00
thorpej
12006f3c05
Don't clobber the error returned by uiomove() when starting the audio
...
output (in case we got a partial block). Fixes PR #7722 , from
Antti Kantee <pooka@iki.fi>.
1999-06-07 19:24:38 +00:00
nathanw
9e14ee3c6e
Fix two small bugs:
...
(1) Fix sense of a strcmp() test so that the monitor subdevice of the
mixer is properly identified.
(2) Use hw_if->set_port() instead of hw_if->get_port() when changinh
the monitor level in audiosetinfo().
Fixes PR kern/7661.
1999-05-30 00:21:08 +00:00
nathanw
ea0550413c
Make these compile on the alpha when AUDIO_DEBUG is defined.
1999-02-26 01:18:09 +00:00
mycroft
35399992bb
Indicate whether the decive is full or half duplex at attach time.
1999-02-19 17:09:16 +00:00
mycroft
e5f5e628d2
Pass the direction to the allocm and round_buffersize methods.
...
Some drivers need this to properly allocate DMAable memory.
1999-02-17 02:37:38 +00:00
augustss
33f1482ece
Make sure recording is started before we return EWOULDBLOCK in a read().
1998-12-27 23:25:32 +00:00
augustss
496387c419
Fold lines to 80 chars.
1998-12-27 22:52:23 +00:00
drochner
6292c7eda0
Make midi_attach_mi() and audioprint() available also if MIDIBUS
...
(but not necessarily MIDI) is defined.
Fixes PR port-i386/6615 (Krister Walfridsson <cato@ulysses.df.lth.se>).
(XXX this should probably go into a separate file to get rid of
the #ifdef mess)
1998-12-20 14:26:44 +00:00
mycroft
53698488ff
Do not permit a class to be recorded as a master or monitor port.
1998-11-25 13:44:13 +00:00
mrg
db3051d720
fix problems in many d_mmap routines:
...
- returned EOPNOTSUPP rather than -1.
- no check for negative offset.
many of these fix potential security problems in these drivers.
XXX XXX XXX
the d_mmap cdev routine should be changed to have a prototype like:
paddr_t (*d_mmap) __P((dev_t, off_t, int));
by someone!
1998-11-19 15:38:20 +00:00
christos
b12bfa760e
Make this compile again with no audio but with midi devices.
1998-09-27 16:43:56 +00:00
mycroft
b742b9ad67
Move some debugging output to more useful levels.
1998-09-01 07:27:06 +00:00
pk
535cdbe9f2
Slight optimization in audio_[pr]int().
1998-08-28 12:07:41 +00:00
augustss
c50af72c34
Handle the case of MIDI devices with no audio devices.
1998-08-28 07:44:12 +00:00
thorpej
1083dcb6ca
Back out previous.
1998-08-18 18:16:30 +00:00
thorpej
73d1752963
Deal with somewhat bogus uninitialized warning in new egcs. Behavior
...
is such that would inidicate that __attribute__((__noreturn__)) is not
being honored.
1998-08-18 06:16:45 +00:00
augustss
cd09067eb4
* Redo the way the way the MIDI driver attaches to audio devices.
...
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
The opl driver is not finished yet; it sounds pretty awful.
For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
1998-08-17 21:16:09 +00:00
mycroft
20ec08b84e
Oops.
1998-08-10 01:17:33 +00:00
mycroft
10148394d2
Call set_params if usemode changes.
1998-08-10 01:13:20 +00:00
mycroft
17431823fb
Add trigger_output and trigger_input entry points, which replace
...
init_{in,out}put and start_{in,out}put, and are only called once.
1998-08-09 20:28:07 +00:00
mycroft
a2fc689833
Make sure output is thoroughly halted on close, and remember that we stopped
...
it.
1998-08-09 07:25:58 +00:00
mycroft
9bedf069cd
Mask off extra usemode bits.
1998-08-09 05:44:51 +00:00
mycroft
b3853549b3
Always copy back both the record and play parameters, in case the driver had
...
to change one behind our back.
1998-08-09 04:54:44 +00:00
augustss
48bae9ee88
Add MIDI support. The MIDI devices can be accessed as ``raw'' through
...
the /dev/rmidiN devices, or with a sequencer interface via /dev/music.
So far the only supported MIDI device is the MPU401 port on SoundBlaster
(and only on SB on isapnp, since we do not have locators with multiple
values yet).
1998-08-07 00:00:55 +00:00
augustss
28e2d6024a
Clarify a comment.
1998-08-05 16:38:09 +00:00
augustss
5b057ab09f
Allow option AUDIO_INTR_TIME even if the platform does not support
...
FP in the kernel.
1998-08-04 11:26:14 +00:00
mycroft
f37f08c48e
This doesn't need opt_compat_netbsd.h any more.
1998-07-09 09:27:33 +00:00
mycroft
401accfd7a
Don't #ifdef the encoding compatibility crud. It's needed for source
...
compatibility with other systems and much third party software.
1998-07-09 02:45:45 +00:00
jonathan
d275e56dee
* defopt COMPAT_{09,10,11,12,13} and COMPAT_NOMID.
...
TODO: revisit interaction between native compat and emul compat usage.
1998-07-05 08:49:30 +00:00
augustss
54281b8662
Avoid spaces in tsleep() string.
1998-05-18 18:27:43 +00:00
augustss
88edb37522
Be more verbose if attaching the audio device fails.
1998-05-15 15:45:58 +00:00
augustss
df71a424d6
Change debug printing a littel again.
1998-04-28 23:19:20 +00:00
augustss
127acabd9c
Add a few more debug messages and clean up debug printing a little.
1998-04-28 09:07:12 +00:00
augustss
44c6ce78d2
Avoid the name free so the MALLOCLOG option works again.
...
Fix some typos.
1998-03-03 09:16:15 +00:00
thorpej
43ba4e27bd
Adjust for config changes.
1998-01-12 08:44:08 +00:00
augustss
a908b2b30e
Fix three problems spotted by mycroft:
...
- Closing the audio device should stop recording.
- Manipulating the pause function could accidentally start playing or recording.
- AUDIO_FLUSH could accidentally start playing or recording.
1997-12-03 01:01:19 +00:00
augustss
b366d54e2e
Fix slight glitch in last commit when AUDIO_DEBUG is on.
1997-10-29 02:11:45 +00:00
augustss
9f84e63746
Do audio attachment the right way. From Chris Demetriou.
...
(Maybe I'll get the hang of the configuration stuff one of these days. :-)
1997-10-29 02:00:20 +00:00
augustss
e7029fc0da
Make the audio API (almost) SunOS compatible.
...
The changes is to allow some limited mixer manipulation through
the audio device (instead of the mixer device).
This rendered 4 methods in audio_hw_if unused so garbage collect these.
1997-10-19 07:41:33 +00:00
is
25ea46120a
TMS320AV110 (mpeg layer 2 decoder chip) and ZBUS Melody board, which uses it.
...
No optionboards yet for Melody, only audio driver.
MPEG data types for audio.c
1997-10-16 23:57:56 +00:00
augustss
31ab81c6e4
Aignore interrupts if the device isn't open.
1997-10-16 16:41:18 +00:00
augustss
0d79fbe5c5
Don't test for unused methods.
1997-10-14 18:43:42 +00:00
mycroft
3cdff9d435
GETPROPS does not indicate whether the device is currently in full-duplex
...
mode. Reinstate GETFD to return this information.
1997-10-11 11:16:28 +00:00
augustss
4f2068ec29
Sanity check hi/lo water mark settings better.
1997-10-07 22:40:43 +00:00
augustss
ffcdaf144d
Move around splaudio() to (hopefully) get rid of some rare race conditions.
...
Add a missing call to round_blocksize.
Add some MIDI stuff that will be used in the future.
1997-09-06 01:14:48 +00:00
thorpej
d2a9d1970d
Don't deference a bad pointers if you try to open an audio device that's
...
not configured.
1997-08-27 18:54:28 +00:00
augustss
955e1e9119
Make sure audio device starts in half-duplex mode and document the fact.
1997-08-26 19:03:55 +00:00