556cf1abc0
Make it possible for audio to attach to audioamd.
1997-08-22 11:45:06 +00:00
1a7afa3853
add commented out reference SCSIVERBOSE option
1997-08-20 18:38:13 +00:00
332ad95e76
Change the MI audio driver so it attaches to the MD driver in the
...
normal way. This requires adding a line to the config files to
get audio to work again.
1997-08-19 23:49:33 +00:00
198bd713f2
Generate assym.h dependencies when making 'depend'.
1997-07-12 22:07:36 +00:00
7a959f1752
Add `maxusers' line and set it to 32.
1997-07-07 21:54:51 +00:00
42f6c894f8
Raise max maxusers to 1024
1997-07-07 21:53:43 +00:00
cbc17e9dd1
ie2,ie3 and ie4 are 32-bit.
1997-06-10 21:54:21 +00:00
dc9c65530d
Define a `vme' device on `iommu' and allow `vmes' and `vmel' as sub-busses.
1997-05-18 19:41:02 +00:00
8744fe853c
clean up use of whitespace
1997-05-07 01:55:23 +00:00
07b064e02e
New ARP system, supports IPv4 over any hardware link.
...
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
1997-03-15 18:09:08 +00:00
4b697aa304
add emul.c
1997-03-15 02:36:00 +00:00
cbbcf185ae
Put the genassym.sh output in a temp file, and mv -f it, in case
...
it fails spectacularly and doesn't clean up.
1997-03-14 23:23:45 +00:00
96153388c0
add in the 'isp' device, for Qlogic ISP 1020-based Sbus SCSI board support
1997-03-13 00:46:13 +00:00
0d71b22d50
Use genassym.cf
1997-03-12 15:17:13 +00:00
a0d3809966
specs for ISP 10x0 (isp) driver Sbus attachment. From Matt Jacob.
1997-03-12 06:43:25 +00:00
f868730b6a
esp carries ncr53c9x attribute
1997-02-27 01:17:09 +00:00
ddb0d6fa06
Add `-mno-fpu' to compiler flags; pulled up from 1.2 version.
1997-02-05 00:12:46 +00:00
79da30bb31
typo.
1997-02-04 21:59:26 +00:00
19d153fc48
Nuke some options GENERIC residue.
1997-02-04 04:57:10 +00:00
0b3a46d6b3
Nuke some GENERIC residue.
1997-02-04 04:31:55 +00:00
f159c829df
Adopt for new file system and root spec grammar.
1997-01-31 02:06:41 +00:00
0a5eeae37c
`::' => `:' ; per recent sys/lib/*/Makefile.inc changes.
1997-01-24 00:58:20 +00:00
7b40f5228e
"md" is declared in sys/conf/files, now.
1997-01-21 09:39:20 +00:00
152f8d880d
add MSDOSFS.
1997-01-17 03:43:56 +00:00
c71a371532
use pseudo-device ipfilter, not ipl.
1997-01-07 11:35:01 +00:00
394d540361
add PFIL_HOOK and ipl, both commented.
1997-01-06 07:35:39 +00:00
fb5d192bc3
include the GENERIC kernel, and then map the disks.
1997-01-06 07:34:14 +00:00
603b61c3e0
rename: ramdisk => md
1996-12-28 23:22:07 +00:00
d539e60bb2
Uncomment lebuffer devices
1996-12-06 22:02:32 +00:00
554078cb87
Declare lebuffer
1996-12-06 21:57:57 +00:00
4c1d96de78
* Replace explicit -O2 in CFLAGS with COPTS macro. Default COPTS?= -O2.
...
Lets users over-ride with makeoptions COPTS="..." in kernel config files.
Leave `mandatory' flags (like -msoft-float which on m68k enforces no
FP in kernel) in CFLAGS.
1996-12-01 06:12:25 +00:00
ab9677d1d6
Move *PAGER options and `machine sparc' to std.sparc.
1996-11-18 00:10:19 +00:00
4ad70417a0
Centralize the declaration of the "en" driver (Efficient Networks, Inc.
...
155Mb/sec ATM interface).
1996-11-12 23:58:01 +00:00
aa965ce3bf
Declare device `audio' at sbus.
1996-11-03 11:18:15 +00:00
19b8bfdf3d
Declare device `audio' at sbus where it resides on Microsparc machines,
...
from Nick Sayer's PR#2908.
1996-11-01 23:15:51 +00:00
748b2c4bbe
Add cgfourteen framebuffer to generic configs
1996-10-03 00:05:41 +00:00
14d1592766
update for exec changes.
1996-10-02 07:11:45 +00:00
e46ca2d67c
Add cgfourteen driver as device "cgfourteen"
1996-09-30 22:43:38 +00:00
b3ffba62a6
Move strip(1) flags into a separate variable, so that $STRIP can
...
be passed to subordinate make(1)s. Remove $TOUCH. Add HOSTED_CC,
HOSTED_CPPFLAGS, and HOSTED_CFLAGS, and use them when depending genassym.
1996-09-09 21:06:55 +00:00
30a617c634
Wrap the default definition of `S' in `.ifndef'.
1996-08-31 21:40:47 +00:00
b8e9f36083
add COMPAT_12.
1996-08-26 23:39:36 +00:00
558d72128e
Put into . Remove hooks for `config-dependent' and
...
`device-driver' flags.
1996-08-12 00:51:24 +00:00
cf67f29afe
* Add a HOSTED_C_C variable, which strips `-p', `-pg', and
...
`-nostdinc', and use it when building genassym.
* Use `-nostdinc' just to be sure we're self-contained.
1996-08-10 06:07:57 +00:00
f94052ed3a
* Define CWARNFLAGS and MKDEP in some moderately consistent fashion.
...
* Make S expand to an absolute path at compile time.
* Use `-S' rather than `-x' to remove debugging symbols.
* Garbage collect unused variables.
* Reverse a handful of port-specific changes that do not correspond to
the common build model and are not needed.
1996-08-10 05:29:24 +00:00
5abbf990f3
Change reboot(2) to take two arguments: bootopt like normal and also
...
a boot string for firmware that can do this, such as the SPARC and
the sun3 models. It is currently silently ignored on all other
hardware now, however. The MD function "boot()" has been changed to
also take a char *.
1996-08-09 10:30:23 +00:00
7544016a9d
sbus specific stuff for eni155s sbus atm card.
...
XXX: only works on sun4c, needs something better than vtophys() for
machines with IOMMUs(?).
1996-06-22 02:02:48 +00:00
43cca6772f
`rd_root.c' => `md_root.c'
1996-06-20 20:17:57 +00:00
5b9021505a
ramdisk stuff.
1996-06-20 20:05:46 +00:00
a0222c1293
Turn on disconnect/reselect by default on targets 4-7 on the premise that
...
tape devices normally are set to one of these targets. Tape devices should
be allowed to disconnect for the SCSI bus to operate acceptably.
1996-06-20 19:50:41 +00:00
5f5407c39e
add tcx
1996-06-19 13:23:25 +00:00
c6d4bf55e3
Add tcx definition.
1996-06-19 13:21:09 +00:00
3d1e64415a
Switch to `sys/dev/sun/event.c'.
1996-05-29 21:56:38 +00:00
dc7e7814d9
Remove the `espdma' special case; all `esp' related dma channels are now
...
called `dma' on all architectures. Note: `ledma' remains in place.
Also delete a couple of unneeded `needs-flag's in files.sparc.
1996-05-21 19:06:26 +00:00
1bd6f1f147
We don't generally want to profile `genassym' (easy part of PR#2434).
1996-05-19 20:58:51 +00:00
d9277a9036
Add Sun4m power0 power status/control register to GENERIC configuration
1996-05-17 18:02:56 +00:00
b9f70e90d8
Add `flags' to the esp entries: disable disconnect & synch negotiation
...
by default until further notice.
1996-05-16 22:47:47 +00:00
e509f9aaeb
Change attributes of `dma', `espdma' and `ledma' (the attributes on the latter
...
two didn't seem to make much sense anyway..) to allow `esp' devices to be
attached to one of `sbus', `dma' and `espdma'.
Remove the wildcarded `espdma?' and `ledma?' attachments of `esp' and `le'
respectively, in favour of `dma?' and `lebuffer?' (but the latter is not
yet implemented), which seems to better match reality: additional SBus
SCSI/Lance boards call themselves `dma' and `lebuffer'.
1996-05-16 22:38:04 +00:00
81ba0732e0
Document the "flags" for the si and sw controllers. While I'm here,
...
do some re-arrangement (cleanup), and document which devices exist on
which machines, so that people can be better informed when they trim
down their kernels. There are a LOT of comments in this file now!
1996-05-16 03:13:27 +00:00
81b0485bfe
These haven't been kept up to date.
1996-05-15 23:57:50 +00:00
540f9550c0
Make `make depend' work for libraries.
1996-05-11 16:11:30 +00:00
0e0d4f1ec2
Make the MI LANCE driver standalone, and use cfattach to resolve
...
naming conflicts between bus attachments on ports that can have
multiple instances of the LANCE.
1996-05-07 01:24:48 +00:00
b3897170bd
Haven't used "options RCONSOLE" for a long time. Update to the new
...
"options RASTERCONSOLE". Noticed by cgd.
1996-04-11 21:54:13 +00:00
e17cddf913
If the power device is configured, don't forget to compile the driver.
...
Also, add some whitespace for readability.
1996-04-11 21:05:42 +00:00
b0fd2dabcb
Include fd.c if (fdc | fd), so we're not obliged to define a device
...
at fdc.
1996-04-04 22:57:55 +00:00
25b6ab86fe
Update device list.
1996-04-01 00:20:31 +00:00
df08150880
Updates for sun4m.
1996-03-31 22:57:09 +00:00
678fbb4806
sun4m device definitions and bus structure.
1996-03-31 22:52:38 +00:00
94907fa254
adjust to deal with expression support for optional file specs
1996-03-17 13:21:09 +00:00
3cd14f7597
New device attachment scheme:
...
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
1996-03-17 02:00:30 +00:00
6d492269e0
Add -Wall -Wstrict-prototypes -Wmissing-prototypes
...
to the kernel build. The sparc is clean now!
1996-03-15 00:02:28 +00:00
855b6def84
Add ns_cksum.
1996-03-02 23:55:17 +00:00
3d67685d36
Do not build vnode_if.[ch] for each kernel. Build them once, like the
...
various syscall sources/headers, and just compile them. From PR 2142, OK'd
by mycroft.
1996-02-29 20:54:58 +00:00
edf9d66f32
First-cut support for P4 framebuffers. Currently supports P4 variants
...
of bwtwo, cgfour, cgsix, and cgeight. Includes support for attaching
the overlay plane of the cgfour and cgeight as a bwtwo instance (a'la
SunOS).
P4 register descriptions, cgfour driver, and cgeight driver partially
derived from OpenBSD.
This code may still need polishing.
1996-02-27 22:09:14 +00:00
2ce52ae489
Define build programs with `?=', so they can be overridden with `makeoptions'.
1996-02-26 02:53:20 +00:00
753fe3a25a
Fix mkdep problems due to missing flags.
1996-02-09 02:21:13 +00:00
5bc076e17e
Use `-traditional-cpp' when building .s and .S files.
1996-02-03 00:43:50 +00:00
dcd66e9f4d
Clone these, and fix many bugs.
1996-02-02 20:08:17 +00:00
fc9d84fb46
assym.s -> assym.h
...
(Some ports did this already.)
1996-02-02 02:34:09 +00:00
0e8ffc850f
"si" and "sw" actually interrupt at level 3 (which I quickly discovered
...
when porting the driver).
1996-01-01 22:46:08 +00:00
33582e90e0
"si" and "sw" now have the ncr5380sbc attribute.
1996-01-01 22:44:05 +00:00
5e55f88874
Remove `-fno-builtin'.
1995-10-22 17:36:33 +00:00
ecf1cf893d
Add forgotten `eeprom' configuration.
1995-10-08 11:45:39 +00:00
c1e313b122
include `files.rcons'.
1995-10-05 00:21:35 +00:00
859b799130
RCONSOLE => RASTERCONSOLE
1995-10-04 23:44:33 +00:00
f33cf7c909
Correct cgtwo address.
1995-09-25 22:33:37 +00:00
8d19642cd6
add "xy" xylogics 450/451 config stuff
1995-09-25 20:20:27 +00:00
b903d705da
Compile the kernel with -Werror and -fno-builtin.
1995-09-19 23:26:58 +00:00
f447526366
vmes => vmes0
1995-09-17 21:11:13 +00:00
2c523b5941
Remove rcons lines.
...
Add cgtwo.
1995-09-17 21:03:36 +00:00
30150218f5
Add cgtwo0.
1995-09-17 21:02:56 +00:00
5bf0d8e4fa
`si' and `sw' are scsibusses.
1995-09-11 19:20:12 +00:00
60a7c4c394
Add `sw' scsi adapter on obio (per Jason Thorpe, PR#1422).
1995-09-05 21:43:09 +00:00
7a84d590e0
Add bwtwo@obio specs (from Jason Thorpe).
1995-08-29 22:50:36 +00:00
bc5b188714
Define bwtwo at obio & vme (from Jason Thorpe).
1995-08-29 22:28:07 +00:00
8274dc04d1
si scsi driver configs.
1995-07-08 21:33:48 +00:00
70b6d95d44
xd definitions, from Chuck Cranor.
1995-06-26 23:01:06 +00:00
4f4e4826a6
xd definitions, from Chuck Cranor.
1995-06-26 23:00:31 +00:00
a5c53e5068
Makefile.`arch`: - Add -lcompat
...
- Change clean: target to be a double dep one,
so libraries can use the clean target too
1995-06-24 20:47:36 +00:00
bf834e228d
Add UNION option.
1995-06-05 12:46:31 +00:00
c86cba88fe
Update SCSI decls.
1995-06-02 17:53:51 +00:00
augustss