29bb03860c
Option key fix from Ken Nakata (kenn@remus.rutgers.edu).
1995-06-30 01:23:21 +00:00
2b71eae2c7
note that most of dev/ic's contents have changed names
1995-06-28 04:30:30 +00:00
b1598cdd1b
Remove a compile warning.
1995-06-25 02:46:46 +00:00
7542473d6d
Clean up I/O base settings a bit.
1995-06-21 03:03:13 +00:00
697011742c
Add some debugging (conditional on DEBUG). Add a more correct probe for
...
internal video. Clean up nubusprint() a bit.
1995-06-21 02:59:08 +00:00
e4ff96e47c
Make NUBUS_BASE_TO_SLOT and reverse not depend on VA==PA for NuBus.
...
Add constant for DRSW_FARALLON.
1995-06-21 02:57:19 +00:00
6ff2537ad3
Make no assumptions about the absolute address of nubus cards.
1995-06-21 02:52:09 +00:00
cb00a78de3
Treat 0 as a failure case for ae_id_card() and take out
...
null-op check for a 0 addrlist in init.
1995-06-21 02:50:22 +00:00
f462aa095a
Be a bit more careful on the probe... Make sure that the current slot's
...
addresses contain the int_video_start--or assume that internal video is
is "slot" 0xE.
1995-06-21 02:48:00 +00:00
d37674426a
"Always compile before you commit."
1995-06-09 02:19:47 +00:00
90caf013ba
In the interrupt routine, bail out if we've not been initialized, yet.
1995-06-08 12:52:02 +00:00
56b5c26854
Get rid of a printf() that got left behind in the probe.
1995-05-06 18:44:48 +00:00
331e2bd82b
Add some code/defines to differentiate Asante and Interlan/Gator cards
...
correctly with the new nubus code.
1995-05-05 05:40:13 +00:00
59b4da2b39
Add new nubus handling that's much more robust.
...
Update via, if_ae, and grf accordingly.
Revamp grf.
1995-04-29 20:23:36 +00:00
a992a8136c
Add some multicast byteorder-related changes from djh@mulga.cs.mu.OZ.AU.
1995-04-22 12:08:12 +00:00
5982b968a9
Enable nubus interrupts after registering.
1995-04-21 04:01:27 +00:00
6bc53a2398
Handle grf_softc in the config.new manner.
...
Should have been done long ago.
1995-04-21 03:44:13 +00:00
13efb6c197
First pass of KNFication. Needs more.
1995-04-21 02:47:35 +00:00
85025d789c
Prototype iteopen correctly (oversight from a while back...).
1995-04-20 15:46:56 +00:00
a6ba5f8f7e
Update to use softc better and handle mainbus being indirect.
1995-04-20 15:32:01 +00:00
4137a8ff57
Add itetty().
1995-04-20 15:27:43 +00:00
a7f44caf1b
Add a sertty() and update to use ser_softc instead of a bunch of arrays
...
everywhere.
1995-04-20 15:27:12 +00:00
bf68945da5
Define struct ae_ring which is necessary because BYTE_ORDER == BIG_ENDIAN,
...
but the card is in x86 byte order mode because NuBUS does the swap "for us"
on 16- and 32-bit transfers. We should probably figure some way to use
the std struct ed_ring if/when all the 8390 drivers are all fully merged.
1995-04-19 04:46:06 +00:00
2b1a13ab2f
Initialize totlen in ae_put. Thanks to chopps for pointing it out!
...
Also, switch back from using struct ed_ring to using struct ae_ring
because BYTE_ORDER == BIG_ENDIAN, but the card is in x86 byte order
mode because NuBUS does the swap "for us" on 16- and 32-bit transfers.
We should probably figure some way to use the std ed_ring if/when
all the 8390 drivers are all fully merged.
1995-04-19 04:43:36 +00:00
38cb076019
Get this working. Mainly, don't always round to word transfers on
...
receive.
1995-04-16 00:14:54 +00:00
f93fa3c440
Update interrupts to use (void *client_data) instead of (int unit) as
...
parameter to interrupt function.
1995-04-13 04:04:58 +00:00
c9e2e6e2a8
Update to use dev/ic/dp8390.h. Mostly from mycroft.
...
Still get extra data on either transmit or recieve, but want to
checkpoint this work.
1995-04-13 03:58:18 +00:00
2bc91b9c2c
Almost working synch with if_ed.c. Much by mycroft. Fixups by me.
...
Inserts garbage characters--this driver isn't ready for use quite yet.
1995-04-12 15:01:14 +00:00
13dc6a7a07
Make nubus indirect. Duh.
1995-04-12 14:57:40 +00:00
09ba51f21e
Fix typo from last changes.
1995-04-12 14:55:45 +00:00
7114c30418
Use global 8530 defs.
1995-04-11 03:00:38 +00:00
8f8bccf41f
Switch grfmap and grfmmap.
1995-04-10 07:56:46 +00:00
c17558aa9b
Fixup types of a few functions to match if.h structure.
1995-04-08 20:55:26 +00:00
7e4d7125a3
Back to previous version of the serial driver until we can figure out
...
why the new one gets a lot of overflows and doesn't work on the IIsi
or IIvx at all.
1995-04-08 13:20:52 +00:00
870235352d
Print a diagnostic if we do hit the watchdog and recover w/o resetting.
1995-04-08 13:17:55 +00:00
9d7efb1fb0
Do iteon() and iteoff(). Right now, they just clear/draw the cursor and
...
clear the screen. "We" should look at updating these further.
1995-03-26 15:52:21 +00:00
bc14b5cbcc
Don't count video interrupts.
1995-03-25 22:28:30 +00:00
bb035dee62
KERNEL -> _KERNEL
1995-03-23 20:19:16 +00:00
24787aea0e
Add macvideo_intr to handle video interrupts. Currently has behavior
...
that was previously in slot_noint().
1995-03-23 13:45:07 +00:00
129893572f
Serious kludge around network timeouts. Network timeouts seem to be
...
caused by the VIA missing the ethernet slot interrupt. If we get a
watchdog, try calling the via's nubus interrupt function. If that
causes an interrupt, don't reset anything. If it doesn't, use old
behavior (log timeout and reset).
Yuck.
1995-03-23 13:00:05 +00:00
50721bd46f
Raise watchdog timer a tad.
1995-03-01 03:47:08 +00:00
4c34be6b52
Clean up deleted files.
1995-03-01 00:00:00 +00:00
347304eb41
Many changes and updates from Dave Leonard (d@fnarg.net.au) and
...
Brad Parker (brad@fcr.com ). I've been sitting on these for a while.
Notes from Dave:
redocumented z8530 stuff.
Added break ioctls and detection.
Pass framing/parity errors to line discipline.
Added TIOC[SG]FLAG.
Attempt at bringing all chip ops together.
deepended s/w fifos to match chip's.
1995-02-11 19:06:57 +00:00
7190ebb7e0
Set sc_link->openings.
...
Simplification of scsi_cmd from pc532 mods to this driver.
1995-02-01 13:50:42 +00:00
bc36ccab9a
Update for scsi changes. Incl. xs->resid = 0 (thanks Phil).
...
Changes compile, but are not tested.
1995-01-15 06:27:54 +00:00
749ca327c9
Nuke Log in if_aereg.h and remove duplicate (and benign) sc->smem_size
...
assignment from Brad Parker (brad@fcr.com ).
1994-12-04 19:40:14 +00:00
1c47e24828
Mac ROM Glue changes from grantham@tenon.com.
1994-12-03 23:33:55 +00:00
d703fa05aa
At least somewhat functional ethernet driver from Brad Parker
...
(brad@fcr.com ). Requires changes to via.c which are coming with
other changes in a moment...
1994-12-03 23:30:45 +00:00
4e06addf8a
Nuke DEBUG.
1994-12-03 23:26:25 +00:00
2bef12a661
Get rid of private delay().
1994-12-03 14:17:20 +00:00
037951ec4f
Remove private delay() and clean up some odd delay times that we were
...
using...
1994-12-03 14:16:58 +00:00
e054795fb3
"../scsi/*.h" -> <scsi/*.h>
1994-11-29 03:43:52 +00:00
81828a6a38
Boolean goof. (True)
1994-11-29 03:38:48 +00:00
492011ffd7
Modify the serial port initialization slightly so it works on the IIsi.
1994-11-03 16:15:27 +00:00
815a0b9aca
Fix a buglet in computation of fbsize. Pointed out by monroe@cs.pdx.edu.
1994-10-30 13:34:31 +00:00
4fdae7a0ae
new RCS ID format.
1994-10-26 08:45:48 +00:00
93b8f0f095
Change strategy slightly so that serial console is enabled if internal
...
console is not--regardless of the value of the boot-time flag.
Suggested by a question from bit@gnu.ai.mit.edu (jim howard - bit.map).
1994-09-30 00:52:44 +00:00
49e7735666
Actually implement serial boot (console) echo (minor change to ite.c).
...
Remove some old junk in ser.c and implement serial console and serial
boot echo (if serial console's enabled, clear echo).
1994-09-29 03:33:13 +00:00
24de5a9668
Nuke a CVS Log entry. Attribute introspection to Brad.
1994-09-12 21:56:36 +00:00
400d187c01
Remove need for "bounds.h." Brad can still use it if he wants ;-)
1994-09-12 03:54:05 +00:00
5432aef717
Fix a scrolling bug when we have more than 64k to scroll.
1994-09-12 03:38:30 +00:00
183f4c6128
Lots of cleanup. Add functions for serial console--just stubs for now.
...
Fix initialization (for good this time?).
Little things.
1994-08-05 01:27:58 +00:00
08d96f103f
Nuke holdovers from old HP300 console code. Get rid of any reference
...
to serial_boot_echo stuff here.
1994-08-02 17:55:24 +00:00
1c22264669
Make internal video look like a grf device so that desktop and X can use
...
it. GRFIOCMAP modifies addr to include the offset into the screen where
the first pixel is. Not a very clean way to do it -- we should add a
field to grfinfo for offset.
1994-07-31 08:32:47 +00:00
82dcea7759
Fixed bug with bcopy()'ing more than 65535 bytes; initialize d_ttys and cn_tp
...
on itecnprobe(); other minor bug and warning fixes.
1994-07-31 06:45:50 +00:00
639939abca
Clean up deleted files.
1994-07-30 04:21:48 +00:00
774ef66058
Moved adbsys.h grfioctl.h and keyboard.h to include to make desktop
...
and X compile more cleanly.
1994-07-30 04:21:42 +00:00
1b935ff541
Clean up deleted files.
1994-07-24 01:23:20 +00:00
a185489f80
Fixed a few bugs in the key-repeat function and disabled key-repeat
...
when /dev/adb is closed to avoid infinite repeat problem. Brad claims
that he's got this solved in his version...
1994-07-21 06:36:51 +00:00
020b962ae6
Added vt100 emulation and sped up text writing, scrolling, etc.
1994-07-21 06:35:49 +00:00
f954a7b0dd
Make "unknown ioctl" printf ifdef DEBUG and take out an extra comma from
...
the format string.
1994-07-21 03:32:07 +00:00
cc7e76a9a5
Put in a warning message that the driver is non-working and checkpoint
...
with a little bit more debugging stuffage.
1994-07-21 01:33:29 +00:00
db146ec64c
Separate init from serattach and make more machine independent by
...
calculating speed during init (different models of macs feed SCC with
different clocks).
1994-07-21 00:52:47 +00:00
60dc2edc69
Make this into more of a device so it can be probed and attached. Nuke
...
RCS/CVS Log. Make ASCBase an offset instead of an absolute.
1994-07-21 00:44:00 +00:00
f8d560f187
Be somewhat better at machine dependence.
1994-07-10 16:55:53 +00:00
cacf1a1b0a
Cleanup a printf, raise the probe timeout, and notice if the probe
...
does time out.
1994-07-09 17:21:13 +00:00
2ff5938343
Minor hacks to get this to compile for now. ite.c now uses the proper
...
consdev structure to keep itself from crashing...
1994-07-09 06:49:34 +00:00
6cd891192f
Move a function here from the old console.c.
1994-07-09 06:38:55 +00:00
8afa3a3b98
Just a checkpoint. Still not close to working, but TUR works--more docs
...
coming today...
1994-07-08 11:38:48 +00:00
29f12f9bc6
6x10.h: shifted font over by two pixels.
...
keyboard.h: added constants for commonly used keys and reformatted
array so that gcc would be happy.
adbsys.c: new adb system.
bounds.h: bound-checking macros.
ite.c: new built-in mini-console.
8x14.h: no longer used by built-in console.
adb.c: replaced by adbsys.c
1994-07-08 07:55:46 +00:00
782af154d0
Need the extra byte in the temp buffer to avoid overrun in scrollup on
...
wide screens.
1994-07-05 03:48:56 +00:00
d0f0219076
Don't blow up on huge screens.
1994-07-04 23:05:34 +00:00
3410def915
Clean up deleted files.
1994-07-03 04:27:17 +00:00
ebdc074703
Reset sccaddr if we're resetting the video address.
...
Nuke some debugging output.
1994-07-02 13:00:37 +00:00
4ade6821f7
Minor mods. Get rid of constants, or update to use a better default
...
value.
1994-06-26 13:02:41 +00:00
a71a746946
MIN -> min. This needs a lot of work.
1994-06-26 13:01:24 +00:00
03d286dddc
Add some support for the '040 macs which use a different scsi chip. The
...
scsi96 driver is just a skeleton at the moment.
1994-06-26 13:00:32 +00:00
03095bbdd6
Don't assume NuBus is at NBBASE. We might remap it.
1994-06-26 12:59:19 +00:00
bc8e4f3bb2
This should probably be deprecated--minor slash job.
1994-06-26 12:58:13 +00:00
f556898e64
Change some default constants--might be overridden during boot, but
...
correct for MacII-class.
1994-06-26 12:57:27 +00:00
4d47d6a194
Let's not hard-code constants, OK?
1994-06-26 12:56:26 +00:00
397e0acc8d
Missed some warnings...
1994-05-06 17:38:38 +00:00
c22c80abac
Clean up some warnings, mainly w/ timeout().
1994-05-06 03:34:53 +00:00
83e8ab7114
Don't even pay lip service to HPUXCOMPAT, now COMPAT_HPUX.
1994-05-04 05:25:41 +00:00
7d99e03949
Clean out some old printf()s and get rid of MAP_FILE reference.
1994-04-05 01:30:28 +00:00
cd701f50a3
Fixed a few major bugs. add_nubus_intr() was getting the wrong address,
...
and bcopy and bzero were being used. The latter use longs to copy/zero,
and some ethernet cards can't handle longs. I've added bbcopy and bbzero
as a temporary hack, but these should later be added to locore and maybe
changed to use shorts. Still doesn't work: I can now get an interrupt on
the first transmit, but further transmits don't generate more interrupts.
1994-03-20 03:03:26 +00:00
c0d5b28126
Goof. Missed some mods in the changes to config.new a long time ago.
...
Thanks go to kesteloo@cs.unc.edu (Lawrence Kesteloot) for finding this.
1994-03-20 00:14:16 +00:00
10c02ec354
More Dayna separation.
1994-03-01 15:24:25 +00:00
82a0604c37
A little clean-up.
1994-02-27 03:40:26 +00:00
3a18d3b2a5
Cleaned up the probe a little by actually using data from the decl. ROMs.
1994-02-26 03:01:22 +00:00
briggs